Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ACRYLIC RESINS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67Linked to original sources

Control of microbial contamination with commercially available cleaning solutions.

The elimination of cross-contamination from operatory to laboratory is required for effective infection control. This study determined whether microbial cross-contamination occurs during cleaning of dental prostheses with an ultrasonicator and examined ways to reduce or eliminate the contamination that might occur. The antimicrobial activities of a temporary cement remover and tartar and stain remover were compared with deionized water and a known strong antimicrobial agent. All solutions were assessed without and with ultrasonication. The microbicidal strains were cultured in brain-heart infusion broth, with and without acrylic resin slabs, and the organisms were killed either without or with sonication and without or with acrylic resin slabs. Further testing with natural plaque-contaminated denture materials is warranted.

Acrylic Resins↗

Effect of mica and glass on acrylic teeth material's color.

The purpose of this study was to evaluate the effect of two different ratios of silanized mica filler and milled glass fiber reinforcement on the color of acrylic denture teeth materials. Ten acrylic resin discs made of acrylic denture teeth material (PMMA) obtained from the manufacturer were used as the control group. Four experimental groups were modified from the control group's PMMA material by adding a ratio of 5% or 10% by weight of silane-treated mica filler or milled glass fibers. Each group consisted of 10 specimens. Measurements were performed using a spectrophotometer CM-2600d, and the color changes were characterized in the Commission Internationale d'Eclairage L*a*b* color space. deltaE* values of 5% mica-, 10% mica-, 5% glass-, and 10% glass-containing sample groups were 2.46, 3.03, 2.16, and 2.59 respectively. There were statistically significant differences in L*, a*, and b* values between the control group and each test group. It was shown that when PMMA denture teeth material was modified with silane-treated mica filler or silane-treated milled glass fibers for the purpose of reinforcement, it would also cause significant changes to the original color of the material.

Acrylic Resins↗

Immediate mandibular rehabilitation with endosseous implants: simultaneous extraction, implant placement, and loading.

PURPOSE: This report of a clinical patient series indicates the relative safety and illustrates the procedures involved in the extraction of remaining teeth followed by immediate implant placement and loading with a simple acrylic resin fixed denture. MATERIALS AND METHODS: Ten consecutive patients who selected tooth extraction and implant-supported fixed denture rehabilitation of the mandible were treated using a 1-visit approach for extraction, implant placement, and restoration. Healthy individuals (10 women) were treated under local anesthesia. Fifty-four implants were placed in 10 patients. Five or 6 Astra Tech implants (11 or 13 mm long) were placed into the edentulous parasymphyseal region of the mandible. Four to 6 implants (48 of 54) were immediately loaded by the fabrication of a simple acrylic resin fixed denture. The criterion for loading was clinical judgment of primary stability, ie, the absence of axial or lateral mobility with physical resistance to rotation. Patients were recalled at 1, 3, and 12 weeks. At 12 weeks, impressions were made for the fabrication of a screw-retained fixed denture. The fixed dentures were completed using conventional fabrication and prosthetic techniques. RESULTS: After a period of 6 to 18 months, all 54 implants had survived and were considered 100% successful by independent testing of mobility and radiographic evidence of osseointegration. There were no surgical complications. Fracture and debonding of the acrylic resin provisional denture occurred for 1 patient during the first 12 weeks of treatment. DISCUSSION: Advantages to extraction with simultaneous replacement include the maintenance of vertical dimension, elimination of reline procedures and interim denture therapy, and potential improvement of soft tissue healing. CONCLUSION: This therapeutic approach simplifies patient care without apparent additional risk.

Adult↗

Shear bond strength of resin teeth to heat-cured and light-cured denture base resin.

The failure of the bond between acrylic resin teeth and denture base material remains a considerable problem. Previous research has indicated that the introduction of a bonding agent to the tooth-resin interface significantly increased the tensile bond strength. To further investigate this finding, and to complement the earlier study, a shear strength assessment was carried out. Both a commercial and an experimental bonding agent were evaluated for tooth retention when applied to heat-cured and visible light-cured (VLC) resin. A significant increase in shear bond strength was obtained when bonding agents were applied. The experimental cement gave the greatest increase in strength, although the VLC resin failed to achieve the same degree of tooth attachment as the heat-cured resin.

Acrylic Resins↗

Application of lingual contact occlusion to complete dentures with two-layered posterior teeth: a clinical report.

When two-layered artificial teeth are used, acrylic resin occlusal parts can be removed from base parts and used directly as resin patterns for casting, which facilitates fabrication of metal occlusal surfaces. Because these teeth were made of acrylic resin, it was easy to modify occlusal morphology before converting to metal. Application of two-layered artificial teeth to achieve lingual contact occlusion brought about sufficient masticatory forces and denture stability and resulted in patient satisfaction.

Acrylic Resins↗

Temperature and dimensional changes in the two-stage processing technique for complete dentures.

OBJECTIVES: This study concerned the temperature and linear dimensional change of heat-cured acrylic resin in the two-stage processing technique for complete dentures. METHODS: Thermocouples were incorporated in the acrylic resin for recording temperatures. Measurements between reference marks were made by a high-resolution digital measuring microscope. RESULTS: No increase in temperature associated with the exothermic nature of the polymerization reaction was recorded. The temperature of the resin followed the waterbath temperature closely. The temperatures recorded at various regions were in phase with each other. The total linear shrinkage of the base after two processing cycles was less than 1% and compares favourably with studies on the single-stage processing technique. CONCLUSIONS: Temperature differential is excluded as a reason for the warpage of dentures. The dimensional changes of the denture base resulting from the two-stage processing technique cannot be considered to be of any clinical significance.

Acrylic Resins↗

Posterior bilateral condylar displacement: its diagnosis and treatment.

One type of condylar displacement (posterior bilateral) was discussed as an etiologic factor in TMJ dysfunction. Joint noise, tenderness on muscle palpation, and acute TMJ pain are all considered signs of TMJ dysfunction. Any joint noise is considered to be an early dysfunctional symptom because of its higher incidence in association with palpable muscle pain or acute TMJ dysfunction. Sometimes the joint noise will immediately precede acute muscle pain and/or fluctuate with the painful symptoms. The treatment of bilateral posterior condyle displacement has been described. The mandibular anterior teeth were shortened and the maxillary posterior occlusion adjusted so that the mandible could be respositioned in an anterior position without increasing the vertical dimension of occlusion. A silver-plated maxillary cast was obtained and mounted on a semiadjustable articulator (Hanau) with a face-bow. The mandibular cast was mounted in the dysfunctional (retruded) centric relation. The articulator was moved into a protrusive position by the amount of anterior correction that is needed to reposition the condyles into the middle of the fossae symmetrically on both sides. The original TMJ radiographs provide the necessary information for this clinical judgment. Acrylic resin was placed in the space created between the condylar sphere and stop on the articulator. An acrylic resin temporary repositioning prosthesis constructed on the metal cast has two functions. It provides a therapeutic trial for the anterior condylar respositioning, and it holds the mandible in the therapeutic position while TMJ radiographs confirm the corrective position of the condyles in the fossae. After a successful 6 to 8 week trial period with remission of symptoms, a gold prosthesis was constructed on the same cast in the same therapeutic position. It remains to be seen whether, after several years, the condylar suspension system changes from a dysfunctional centric relation to a new functional centric relation in which the patient can no longer return to the posterior displaced condylar position in the fossa. Only with painstaking observations, accurate TMJ radiographs, complete documentation, and after-care can a more scientific approach to the diagnosis and treatment of TMJ dysfunctional pain syndrome be achieved.

Acrylic Resins↗

Characterization of cross-linking structures in UV-cured acrylic ester resin by MALDI-MS combined with supercritical methanolysis.

The cross-linking structure of the ultra violet (UV)-cured resin prepared from dipentaerithritol hexacrylate (DPHA) was characterized by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) combined with supercritical methanolysis. The MALDI-mass spectrum of the decomposition products obtained by supercritical methanolysis contained a series of peaks of sodium-cationized methyl acrylate (MA) oligomers up to around m/z = 4000 formed through selective cleavage and methylation occurred at ester linkages in UV-cured DPHA. Furthermore, in order to observe widely distributed sequence lengths in the cross-linking junctions, the decomposed products of the cured resin were then fractionated using size exclusion chromatography followed by the MALDI-MS measurements of the individual fractions. The MALDI-mass spectra of the lower molar mass fractions mainly consisted of a series of peaks of MA oligomers around m/z values of several thousands, whereas those of higher molecular weight showed a broad peak up to m/z ca. 180000. The observed distributions of the supercritical methanolysis products suggested that the network junctions in the given UV-cured resin were composed of up to around 2000 acrylate units.

Acrylates↗

In vitro study on the effects of trial denture cleansers with berberine hydrochloride.

The antifungal activity of trial denture cleansers prepared with berberine hydrochloride was examined against Candida albicans, C. tropicalis, and C. glabrata. A commercial denture cleanser and a trial denture cleanser that exhibited strong antifungal activity were tested for their effects on Candida spp., the color stability of the dental material, and the surface roughness of acrylic resin plates. The results of these tests revealed that the trial denture cleanser removed 64% to 89% of adhered cells from acrylic resin surfaces and had little effect on the other physical properties tested.

Acrylic Resins↗

[Basic study on pressure of supporting tissues under upper complete denture].

Through simulation method, the influences of occlusal force loading point, posterior pontics arrangement, palate thickness and denture base material on pressure distribution over supporting tissues under maxillary complete denture were studied. The results were the following: 1. Pressure distribution over supporting tissues showed remarkable variation according to the position of the occlusal force loading point. 2. Pressure on the buccal side of the alveolar ridge was greater in the buccally shifted arrangement of posterior pontics than in the standard and lingually shifted arrangements. 3. Reduced palate resin thickness below normal value increased pressure on the palate midline region. 4. For the standard and lingually shifted arrangements of posterior pontics, pressure on the incisor and palate midline regions is decreased in metal base compared to acrylic resin base. In the buccally shifted arrangement, pressure on buccal side of the alveolar ridge is lesser in metal base than in acrylic resin base.

Acrylic Resins↗

A survey of dentitions and removable partial dentures constructed for patients in North America.

The prevalence of removable partial dentures in North America is not known. This study was designed to collect information about (1) the indications for, (2) the teeth to be replaced with, and (3) the type of major connectors used in removable partial dentures. Five commercial dental laboratories situated in different regions of North America were selected to give as wide as possible a view of the production of removable partial dentures. Each laboratory was asked to provide details of 300 consecutive removable partial dentures. Photographs (35 mm) of master casts and processed partial dentures were obtained for more than 1300 patients. The color slides were analyzed and the remaining teeth and types of dentures were recorded. The dentures were classified as follows: cast frame denture, acrylic resin denture with or without some wrought metal, and acrylic resin denture with some cast units. The major connectors were classified as one of seven alternatives in the maxillae, and as one of six alternatives in the mandible.

Canada↗

In vitro study of cementation of cast splints on nonmobile and mobile teeth.

The marginal opening of a fixed splint on movable and firm abutments was investigated. Regular-body poly(vinyl siloxane) was used as a luting material to cement a three-unit, cast complete crown splint on three metal dies in an acrylic resin model. The middle abutment was set first in acrylic resin and subsequently in a displaceable material. The cement replica was recovered, measured, and compared. The mean cement thickness for the mobile displaceable abutment was significantly greater (P less than 0.001) than that of nonmobile teeth.

Cementation↗

Technique for the repair of removable partial denture backings.

An easy and practical technique has been described for replacement of a removable partial denture retentive pin as an alternative to fabricating a new removable partial denture or reprocessing the acrylic resin part of the old metal framework. The technique uses the Hydroflame II soldering unit, which provides controlled, localized application of heat without damaging any acrylic resin that may be present.

Acrylic Resins↗

Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials.

Adhesive bond strength studies for the tray adhesive of an addition vinyl polysiloxane (President) impression material were conducted with an acrylic resin, chromium-plated brass, and plastic trays. Tensile and shear stress studies were performed on the Instron Universal testing machine. Acrylic resin specimens roughened with 80-grit silicon carbide paper exhibited appreciably higher bond strengths compared with different types of tray material and methods of surface preparation.

Acrylic Resins↗

Practical application of polyurethane and Velcro in maxillofacial prosthetics.

A procedure is described for the fabrication of an extraoral prosthesis with an acrylic resin substructure that retains a magnet sealed from the environment by a polyurethane liner. Velcro is used to enhance the bond of the acrylic substructure to the silicone prosthesis. This procedure results in improved retention of the acrylic resin substructure and protection of the magnet with an encapsulating polyurethane liner.

Acrylic Resins↗

The creep behavior of acrylic denture base resins.

The creep behavior of acrylic dental base resins, at room temperature and at different loading conditions, has been examined. The behaviors of these resins are similar to that of "commercial perspex" at room temperature over a period of 1000 seconds. The pseudo-elastic moduli of the blends of PMMA VC show a significant increase compared with PMMA alone. The addition of the PVC powder to the heat-cured acrylic resin increased the time-dependent elastic modulus. This increase in elastic modulus is advantageous in the production of denture based resins of improv mechanical properties.

Acrylic Resins↗

Comparison of temperature increase in the pulp chamber during the polymerization of materials used for the direct fabrication of provisional restorations.

STATEMENT OF PROBLEM: Polymerization of resin materials used for the fabrication of provisional restorations is associated with an exothermic reaction. This temperature rise may present a serious biological problem, since it can cause iatrogenic thermal trauma to the pulp. PURPOSE: This in vitro study compared the temperature increase in the pulp chamber of a molar placed in contact with different resins used for the direct fabrication of provisional restorations. MATERIAL AND METHODS: Polymethyl methacrylate (Jet), polyethyl methacrylate (Snap), polyvinylethyl methacrylate (Trim), Bis-acrylic composite (Protemp II), and a VLP urethane dimethacrylate (Revotec LC) were compared with respect to their exothermic reaction properties during polymerization. A mandibular molar prepared for a complete coverage restoration was placed in an acrylic resin block. A thermal probe connected to a digital thermometer was placed into the pulp chamber. Specimens were submerged in a water bath to simulate intraoral conditions. The provisional resin materials tested were measured and mixed according to manufacturer's instructions. The resin mixture was placed into a vacuum-formed acetate template and was then positioned on the prepared molar tooth. The temperature was recorded during polymerization at 30-second intervals until it was evident that the peak temperature had been reached. Temperature increase was measured ( degrees C) for both the initial crown fabrication and the reline procedures. Data were analyzed with descriptive statistics, 1-way analysis of variance, and Tukey Honestly Significant Difference tests (alpha=.05). RESULTS: One-way ANOVA revealed significant differences (F=57.010, P<.0001) in temperature rise for different provisional resin materials. Mean temperature increase for the provisional crown fabrication ranged from 37.76 degrees C for the polyvinylethyl methacrylate to 39.40 degrees C for the polymethyl methacrylate. Mean temperature rise for the reline procedures ranged from 36.80 degrees C for the polyvinylethyl methacrylate to 37.69 degrees C for the polymethyl methacrylate. All of the tested materials produced an exothermic chemical reaction. CONCLUSIONS: Polymethyl methacrylate produced the higher exothermic reaction in both initial crown fabrication and reline procedures. Polyethyl methacrylate, polyvinylethyl methacrylate, and Bis-acrylic resins tested were not significantly different from each other.

Acrylic Resins↗

The intensity of immunogold labeling of deplasticized acrylic sections compared to deplasticized epoxy sections-Theoretical deductions and experimental data.

The purpose of this study was to compare the level of immunogold labeling of deplasticized acrylic sections and deplasticized epoxy sections. Pure protein gels of IgG, albumin and thyroglobulin were produced by glutaraldehyde fixation and embedded in non-crosslinked acrylic resin (Technovit 9100) and epoxy resin (Epon 812), respectively. Ultrathin sections of acrylic and epoxy resin were separately deplasticized in 2-methoxyethyl acetate (MEA) and sodium ethoxide. Quantitative immunogold labeling was performed with anti-IgG, anti-albumin and anti-thyroglobulin antibodies on sections of the corresponding protein gels. For all antibodies tested, the intensity of labeling for deplasticized acrylic sections was significantly higher (two to four times) than for the corresponding deplasticized epoxy sections. The results fit with a theoretically deduced relation: the quotient of the labeling of two deplasticized sections of different resins is equivalent to the square root of the quotient of the labeling of the similar sections not exposed to any kind of pre-treatment. The practical significance of the results is that immunolabeling of deplasticized non-crosslinked acrylic resin results in more intense immunogold labeling than deplasticized epoxy sections. Deplasticizing is most useful when the requirements for ultrastructural preservation according to conventional criteria are moderate. Our theoretically deduced results also indicate that deplasticized Technovit (or other non-crosslinked acrylic resins) sections will be significantly better suited for immunolabeling at the light microscopic level than deplasticized epoxy sections.

Acrylic Resins↗