Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “sample preparation”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources
PubMed2005

Influence of sodium fluoride on the stability of human blood samples and blood gas measurements.

OBJECTIVE: This study aimed to reduce the analytical error associated with measuring oxygen and carbon dioxide partial pressures as well as the pH in arterial blood samples an hour after sample collection. The standard blood sample preparation procedure involving sample cooling down to 0 degrees C is known to have several drawbacks. Therefore, another approach using NaF at room temperature as an inhibitor of metabolic reactions was introduced. DESIGN AND METHODS: Arterial heparin blood samples from six volunteers were distributed over 104 single capillaries prepared with different concentrations of NaF. The capillaries were filled simultaneously and under the same conditions with blood samples, and the blood gas parameters of each sample were measured. Changes in pO2, pCO2, and pH during storage were evaluated with the aid of t test statistics. RESULTS: During the storage period under investigation, fluctuations of the carbon dioxide partial pressure and the pH were low, whereas there was a significant (P < 0.01) decrease of the oxygen partial pressure. This was observed at all NaF concentrations. Depending on the addition of NaF, a significant baseline shift for the time-resolved pH and pCO2 values could be observed. Whereas the partial pressure of carbon dioxide and the pH could be kept stable by adding a defined amount of NaF, the partial pressure of oxygen decreased significantly over 70 min. CONCLUSIONS: The proposed new method can be practically applied to a comparative blood gas study, significantly reducing the blood sample volume required. The application of analytical grade NaF is an improvement compared to previous work because a pH decrease could not be observed.

Blood↗
PubMed1980

[Preparation of samples of biological fluids for electron spin resonance (ESR) examination].

The ESR (Electron Spin Resonance) Technique, is usually used in the study of Free Radicals and Metal - Proteins, in biological fluids, but the most apt method for the preparation of the sample has still to be defined. In this work the A.A. describe and analyse the negative and positive aspects of several methods. The results of the E.S.R. spectra, obtained by means of lyophilization, that is the most used method in literature, have been compared with those obtained by means of concentration of some biological fluid (serum and synovial fluid). The A.A. demonstrated that the lyophilization does not permit the reproducibility of the spectra, for different spectra are obtained from the same lyophilized serum and synovial fluid samples. A high reproducibility of the spectra is instead obtained by the concentration of the sample means of the "collodion bag" or "Aquacide" methods. The A.A. are convinced that for on exact investigation of the E.S.R. Signals, only the concentration method is useful, and not the lyophilization method as reported in literature.

Blood Chemical Analysis↗
PubMed2000

Determination of total sulfur compounds and benzothiazole in asphalt fume samples by gas chromatography with sulfur chemiluminescence detection.

As part of a collaborative project between the National Institute for Occupational Safety and Health and the Federal Highway Administration to evaluate asphalt pavers' exposures to asphalt fume and their potential health effects, a method was developed for the determination of total sulfur compounds and benzothiazole in asphalt fume samples. Asphalt fume samples were collected from asphalt mixtures with and without the addition of ground-up rubber tires. The asphalt fume samples were collected with sampling trains that consisted of a Teflon membrane filter and an XAD-2 adsorbent tube. Filter and sampling tube media were extracted with hexane and subsequently analyzed by gas chromatography with a sulfur chemiluminescence detector. Separation was achieved with a 100 percent dimethyl polysiloxane fused silica column. Typical calibration curves had linear correlation coefficients of 0.99 or better with a relative standard deviation (RSD) of 5 percent. Benzothiazole desorption efficiency (DE) determined using spiked sampling tubes ranged from 96.5 percent at 5.0 micrograms to 89.4 percent at 40 micrograms with RSD values from 0.9 to 4.0 percent. Benzothiazole storage recovery determined using sampling tubes spiked at 20 micrograms and refrigerated for 30 days at 4 degrees C was 89.8 percent when corrected for the DE with an RSD of 1.1 percent. The limit of detection for the method determined using spiked sampling tubes was 0.30 microgram. Quantitation for total sulfur compounds and benzothiazole was against benzothiazole standards in hexane. Because of detector selectivity, sample preparation consisted of a simple hexane extraction even when samples had a high background due to hydrocarbon overload. Detector sensitivity provided quantitation in the sub-microgram region. Because of the sample preparation step and because benzothiazole was determined during the same analysis run, this method is straightforward and analytically efficient. The method has been used to analyze asphalt fume samples collected at several asphalt paving and roof operations.

Air Pollutants, Occupational↗
PubMed2003

Large-volume sample stacking combined with separation by 2-hydroxypropyl-beta-cyclodextrin for analysis of isoxyzolylpenicillins by capillary electrophoresis.

A simple, quick and sensitive capillary electrophoretic technique has been developed for the pharmaceutical analysis of isoxazolylpenicillins (oxacillin, cloxacillin and dicloxacillin) at trace levels for the first time. This method comprises large-volume sample stacking using the electroosmotic flow (EOF) pump (LVSEP), separation using 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as selective complex-forming background electrolyte additive, and direct UV detection. A complete resolution was achieved in the optimal background electrolyte containing 5.2 mM HP-beta-CD. LVSEP was successfully applied in their determinations to improve the sensitivity, where the EOF in the buffer zone was suppressed by using an acidic buffer with pH 3.6. The detection limits of the current technique were found to be 2.0 microg/L for each of the isoxazolylpenicillins based on the signal-to-noise ratio of 3. The curves of peak response versus concentration were linear from 5.0 to 400.0 microg/L with regression coefficients of 0.9982, 0.9986 and 0.9976, respectively. The interaction of isoxazolylpenicillins with HP-beta-CD was discussed. The association constants for complexes of HP-beta-CD with isoxazolylpenicillins were determined by electrophoretic method. The obtained association constants were 27.3, 34.9, and 48.5 M(-1), respectively, being proportional to their hydrophobic properties and steric hindrances. A simple and easy-manipulative sample preparation method was developed and validated by analyzing commercially available milk samples. It was found that with current sample preparation process and instrumentation system, 0.1 mL of milk sample is enough for the analysis of isoxazolylpenicillins to meet European Union (EU) guideline of 30 microg/kg.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2004

New capillary electrophoresis method for the determination of furosine in dairy products.

A new capillary electrophoresis (CE) method was established for the quantitative determination of furosine in dairy products. Sample preparation and suitable electrophoretic conditions allowed accurate and reproducible quantitation of furosine in dairy products. Sample preparation consisted of drying hydrolyzed samples, redissolving them in 0.2 M NaOH, and purifying them by solid-phase extraction. The electrophoretic separation was carried out in an uncoated capillary maintained at 30 degrees C using 0.1 M phosphate buffer containing the additive hexadecyl trimethylammonium bromide (HDTAB, 1.2 mM) (pH 7.0) under 10 kV voltage and reverse polarity. Coefficients of variation of less than 2.25% for migration time and 5.80% for peak areas indicated that the technique was reproducible. The calibration curve followed a linear relationship with a highly significant (p < 0.01) coefficient of multiple determination (R (2) = 0.997). The limit of quantitation was 0.5 ppm, a concentration that corresponds to 4.5 mg/100 g of protein in milk samples. Furosine concentration (mg/100 g of protein) ranges of different dairy products (raw, pasteurized, UHT, and evaporated milks and yogurt) agreed with ranges previously reported. Therefore, the CE method presented is a suitable technique for the routine assessment of furosine in dairy products.

Animals↗
PubMed1978

Stability and blood level determinations of cefaclor, a new oral cephalosporin antibiotic.

Cefaclor solutions in pH 2.5 and 4.5 buffers contained at least 90% of their initial activity after 72 h at 4 degrees C. Samples in pH 6.0, 7.0, and 8.0 buffers contained 70, 46, and 34%, respectively, of their initial activity after 72 h at 4 degrees C. After 72 h at 25 degrees C, samples prepared with pH 2.5, 4.5, 6.0, 7.0, and 8.0 buffers contained 95, 69, 16, 5, and 3%, respectively, of their initial activity. After 72 h at 37 degrees C, cefaclor solutions in pH 2.5 buffer contained 80% of the initial activity, whereas samples prepared in pH 4.5, 6.0, 7.0, and 8.0 buffers contained less than 20%. Laboratory-prepared plasma and serum samples showed an 8% loss in activity when incubated for 6 h at 4 degrees C, a 51% loss when incubated for 6 h at 25 degrees C, and a 48% loss when incubated for 2 h at 37 degrees C. Clinical samples demonstrated a similar stability pattern. Degradation rates for cefaclor in commercially prepared serum increased from 4- to 10-fold in comparison to rates obtained when samples were made in human serum freshly prepared in our laboratory. Consequently, serum standards should be made in freshly prepared human serum.

Cephalosporins↗
PubMed2006

Detection and differentiation between pathogenic and saprophytic Leptospira spp. by multiplex polymerase chain reaction.

A multiplex polymerase chain reaction (PCR) was developed for diagnosing leptospirosis and differentiating pathogenic and saprophytic leptospires. Specific primers were designed to amplify 23S rDNA from pathogenic Leptospira and saprophytic Leptospira spp. PCR products from 27 pathogenic and 5 (including 1 intermediate) saprophytic serovars were 615 and 316 base pairs (bp), respectively. After the restriction enzyme's digestion of PCR products, the fragments by SacI of pathogenic serovars and by PstI of saprophytic serovars were 339 and 276 bp and 202 and 114 bp, respectively. The PCR primers enabled amplification of DNA from L. meyeri serovar Ranarum as a pathogenic Leptospira spp. The PCR assay could detect 1 to 2 cells of leptospires and not amplify DNA from other 18 bacterial species. The sensitivity and specificity of this PCR in rat kidney, using isolation as gold standard, were 98.6% and 100%, respectively. The most appropriate sample preparation of blood for detecting DNA was buffy coat. Among the sample preparations from 7 laboratory-confirmed leptospirosis cases, leptospiral DNA was detected in all 7 buffy coat preparations, whereas leptospiral DNA was detected in only 3 plasma or serum samples. The PCR assay may be useful as a diagnostic tool for leptospirosis.

Animals↗
PubMed1985

Assay of total and free propranolol in plasma by liquid chromatography with fluorometric detection.

We report a liquid-chromatographic method for assay of total and free propranolol and its metabolite, propranolol glycol, in plasma. An ultrafiltration device is used to separate the free drugs from the protein-bound drugs. The total and free drugs are isolated from plasma or ultrafiltrate by liquid-solid extraction on a Waters C18 SEP-PAK and the drugs are quantified on a C18 mu-Bondpak radial-compression column. The mobile phase consists of equal parts of methanol and a solution of potassium 50 mmol/L phosphate and 2.5 mmol/L 1-pentane-sulfonic acid, pH 5.0. Detection was by fluorescence, with excitation at 296 nm and emission at 338 nm. Time required for sample preparation for total-propranolol assay is 40 min per eight samples. Sample preparation for free-propranolol assay requires an additional 1 h per eight samples. Chromatography requires 15 min per sample. The extraction recovery is approximately 75% and the assay curve is linear from 5 to 400 micrograms/L. The run-to-run CV is 4% for total propranolol, 15% for free propranolol.

Binding, Competitive↗
PubMed2006

Effective quenching of fragment formation in negative ion oligonucleotide matrix-assisted laser desorption/ionization mass spectrometry through sodium adduct formation.

Metastable decay of the sodium-free and the sodium adducts of the negatively charged hexameric nucleotides 5'-d(TTXYTT)-3' (X and Y are dC, dG or dA) in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-ToF-MS) is reported. We show that the sodium adduct formation may be used to quantitatively quench dissociation channels in oligonucleotide MALDI-MS, and we argue, that by means of effective steps in the sample preparation that lead to per-sodiation of the sample, the sample preparation and the mass resolution of oligonucleotide mass spectra in MALDI may be improved substantially. The dependency of the fragment formation on the degree of sodiation is also discussed in context with the underlying fragmentation mechanisms.

Anions↗
PubMed2005

Gut carbohydrases from the New Zealand marine herbivorous fishes Kyphosus sydneyanus (Kyphosidae), Aplodactylus arctidens (Aplodactylidae) and Odax pullus (Labridae).

Carbohydrase activities were examined in Odax pullus (Labridae), Kyphosus sydneyanus (Kyphosidae) and Aplodactylus arctidens (Aplodactylidae) collected from subtidal reefs in northeastern New Zealand. Enzyme extracts were prepared using two methods from gut wall, gut fluid and microbial pellet samples taken serially along the gut, and assayed against the substrates starch, laminarin, carrageenan, alginate and agarose. In all three fish species, starch degradation activity was substantially higher than for any other substrate tested. Activities of 500, 1294 and 3326 units g tissue(-1) were measured in anterior gut wall extracts of O. pullus, K. sydneyanus and A. arctidens, respectively. Starch degrading activity in gut fluid declined from 37, 313 and 284 units ml(-1) in anterior gut sections of O. pullus, K. sydneyanus and A. arctidens, respectively, to less than 50 units ml(-1) in terminal gut section of each species. Activity against structural polysaccharides was much lower than against starch and was detected mainly in posterior gut sections. The two methods of sample preparation differed little in enzyme activities; however, method of sample preparation did affect isoform patterns as displayed by zymogram analysis. Results suggest that these fish species fall on a continuum from maximizing throughput and digesting easily hydrolysed substrates in the foregut in A. arctidens to relying more heavily on microbial fermentation in the hindgut in K. sydneyanus.

Animals↗
PubMed2002

LC determination of praziquantel in human plasma.

A simple high-performance liquid chromatographic (HPLC) method for the determination of praziquantel in human plasma was developed and validated. The present method was described by adding drop-wise 0.2 M Zinc sulfate and acetonitrile to plasma sample for deproteinization. This method used a reversed-phase Spherisorb ODS 2 column (5 microm), 250 x 4.6 mm i.d. as a stationary phase with a mobile phase consisting of acetonitrile- methanol-water (36:10:54, v/v/v), a flow rate of 1.5 ml/min and UV detection wavelength of 217 nm. Diazepam was used as internal standard. The standard calibration curve was linear over the concentration range of 100-2000 ng/ml (r=0.999). The equation of a linear regression line was y=8.05E-04+7.25E-04x with slope and intercept values of 0.0007 and 0.0008, respectively. The limit of detection was 12.25 ng/ml and the limit of quantification was set at 100 ng/ml. The intra- and inter-day assay coefficients of variation (CV) were 3.0+/-1.7 and 6.3+/-1.9%, respectively. The percentage of recovery was 102.1+/-5.6. Therefore, the HPLC method described here was simple, rapid and reproducible since it did not require extraction and evaporation processes in sample preparation, which will reduce time-consuming or expensive sample preparation.

Anthelmintics↗
PubMed1996

Aggregation of rhDNase occurred during the compression of KBr pellets used for FTIR spectroscopy.

PURPOSE: To determine if a protein changes when it is compressed into a KBr pellet for FTIR spectroscopy measurement in the solid state, using recombinant human deoxyribonuclease I (rhDNase) as an example. METHODS: Lyophilized rhDNase with KBr compressed at different pressures were analyzed by FTIR spectroscopy, size exclusion HPLC and enzymatic activity assay. Different protein/KBr weight ratios and residual water contents were studied for their possible effects on aggregation. RESULTS: Depending on the pressure, a loss of enzymatic activity accompanied by an increase in soluble high molecular weight aggregates of the protein (up to approximately 15%) was demonstrated. Aggregation was reduced to less than 5% by a suitable dilution of the protein in KBr (1 in 1000). In contrast, water content variability (1-11 wt. %) did not affect aggregation. CONCLUSIONS: The findings emphasize the importance to examine for protein integrity when using the KBr method for FTIR sample preparation. Protein aggregation may be minimized by optimizing the sample preparation condition such as changing the protein/KBr weight ratio.

Bromides↗
PubMed1993

Outer Membrane Proteins and Lipopolysaccharides in Pathovars of Xanthomonas campestris.

Variations in the outer membrane proteins (OMPs) and lipopolysaccharides (LPSs) of 54 isolates belonging to 16 different pathovars of Xanthomonas campestris were characterized. OMP samples prepared by sarcosyl extraction of cell walls and LPS samples prepared by proteinase K treatment of sonicated cells were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis in the presence of 4 M urea. In general, the OMP and LPS profiles within each pathovar were very similar but different from the profiles of other pathovars. Heterogeneity in OMP and LPS profiles was observed within X. campestris pv. campestris, X. campestris pv. translucens, and X. campestris pv. vesicatoria. LPSs were isolated from six X. campestris pathovars, which fell into two major groups on the basis of O antigenicity. The O antigens of X. campestris pv. begoniae, X. campestris pv. graminis, and X. campestris pv. translucens cross-reacted with each other; the other group consisted of X. campestris pv. campestris, X. campestris pv. pelargonii, and X. campestris pv. vesicatoria. A chemical analysis revealed a significant difference between the compositions of the neutral sugars of the LPSs of those two groups; the LPSs of the first group contained xylose and a 6-deoxy-3-O-methyl hexose, whereas the LPSs of the other group lacked both sugars.

Journal Article↗
PubMed2000

Semi-automated 96-well liquid-liquid extraction for quantitation of drugs in biological fluids.

A semi-automated liquid-liquid extraction (LLE) technique for biological fluid sample preparation was introduced for the quantitation of four drugs in rat plasma. All liquid transferring during the sample preparation was automated using a Tomtec Quadra 96 Model 320 liquid handling robot, which processed up to 96 samples in parallel. The samples were either in 96-deep-well plate or tube-rack format. One plate of samples can be prepared in approximately 1.5 h, and the 96-well plate is directly compatible with the autosampler of an LC/MS system. Selection of organic solvents and recoveries are discussed. Also, precision, relative error, linearity and quantitation of the semi automated LLE method are estimated for four example drugs using LC/MS/MS with a multiple reaction monitoring (MRM) approach. The applicability of this method and future directions are evaluated.

Algorithms↗
PubMed1979

Sedimentation velocity separation: a preparation method for cervical samples.

A preparation procedure, aiming at monolayer deposition of cervical exfoliative material on glass slides for high resolution prescreening has been developed. The main features of this procedure are centrifugal deposition after suspension and sedimentation of samples over isopycnic medium of 1.026 density. Fractioning of the separation column after centrifugation at 50 X g yields two preparations with leukocytes, bacteria and cellular debris predominantly located on the first slide and epithelial cells on the second one. The degree of spatial cellular isolation as well as the amount of diagnostically relevant cells per slide seem to fit the requirements of automated high resolution analysis.

Cell Separation↗
PubMed2006

A method for quantitative determination of furanocoumarins in capsules and tablets of phytochemical preparations.

A method for sample preparation and analysis by high-performance liquid chromatography with UV detection (HPLC-UV) was developed for analysis of psoralen, bergapten and 5-[3-(4,5-dihydro-5,5-dimethyl-4-oxo-2-furanyl)-butoxy]-7H-furo[3-2-g][1]benzopyran-7-one in capsules and tablets employed in Brazil for certain illnesses. The linearity, accuracy, the inter- and intra-day precision of the procedure were evaluated. Analytical curves for furanocoumarins were linear in the range of 1.0-50.0 microg/ml. The recoveries of the furanocoumarins in the products analyzed were 97.3-99.5%, and the percent coefficient of variation for the quantitative analysis of the furanocoumarins in the analyses was under 5%. For inter-equipment study gas chromatography (GC) was employed.

5-Methoxypsoralen↗
PubMed1985

Phenylalanine analyses of blood-spot control materials: preparation of samples and evaluation of interlaboratory performance.

Aliquots (0.1 mL) of whole-blood pools prepared to contain various concentrations of phenylalanine were applied to filter-paper collection cards, dried, and stored in sealed bags. We measured the phenylalanine content of the dried blood spots by bioassay, fluorometry, and "high-performance" liquid chromatography, and found that the concentrations remained constant for two years when samples were kept at -20 degrees C or lower. Intra- and interlaboratory studies showed that results for phenylalanine were greater for laboratories using bioassay procedures than for those using fluorometric procedures. Further, CVs (both among- and within-laboratory) obtained with fluorometric procedures were nearly half as great as the CVs obtained by laboratories using bioassay techniques.

Biological Assay↗