Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Chlorophenols”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources
PubMed2000

Development of an automated on-line solid-phase extraction-high-performance liquid chromatographic method for the analysis of aniline, phenol, caffeine and various selected substituted aniline and phenol compounds in aqueous matrices.

A fully automated solid-phase extraction (SPE)-high-performance liquid chromatographic method has been developed for the simultaneous analysis of substituted anilines and phenols in aqueous matrices at the low- to sub-microg/l level. Diode array and electrochemical detection operated in tandem mode were used for analyte detection. Two new polymeric sorbent materials (Hysphere-GP and Hysphere-SH) were evaluated for the on-line SPE of substituted anilines and phenols from aqueous matrices and their performance was compared with the PRP-1 and PLRP-S sorbents. Hysphere-GP sorbent packed in 10 x 2 mm cartridges was found to give better results in terms of sensitivity and selectivity of the overall analytical method. The proposed analytical method was validated for the analysis of these compounds in Axios river water that receives industrial, communal and agricultural wastes. The detection limits for all the compounds range between 0.05 and 0.2 microg/l, except for aniline and phenol which have detection limits of 0.5 and 1 microg/l, respectively (aniline detected by electrochemical detection). The recoveries for all the compounds are higher than 75% except for aniline (6%), phenol (50%) and 3-chlorophenol (67%). Finally, in order to evaluate the efficiency of the Hysphere-GP (10 x 2 mm) cartridges for sample stabilization and storage, the stability of the compounds of interest at the sorbed state onto these cartridges has been evaluated under three different temperature regimes (deep freeze, refrigeration, 20 degrees C).

Aniline Compounds↗
PubMed2001

A capillary electrophoresis study on the influence of beta-cyclodextrin on the critical micelle concentration of sodium dodecyl sulfate.

The influence of beta-cyclodextrin (beta-CD) on the critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS) was investigated by capillary electrophoresis using anionic chlorophenols as probe molecules at pH 7.0. The variations of the electrophoretic mobility of probe molecules as a function of surfactant concentration in both premicellar and micellar regions in the absence and presence of beta-CD was analyzed. The results indicate that, as a consequence of a strong inclusion complexation between beta-CD and SDS, the encapsulation of beta-CD with probe molecules is greatly diminished, or even vanished, in the presence of SDS. The complexes formed between beta-CD and SDS monomers exist predominantly in the form of a 1:1 stoichiometry, while the complexes with a 2:1 stoichiometry reported previously in the literature as a minor component may exist by less than 10%. The elevation of the CMC value of SDS depends not only on the concentration of beta-CD in the buffer electrolyte but also on methanol content in the sample solution. The binding constants of probe molecules to beta-CD, to surfactant molecules, and to the complexes formed between beta-CD and SDS are reported.

Cyclodextrins↗
PubMed2001

Evaluation on the adsorption capabilities of new chemically modified polymeric adsorbents with protoporphyrin IX.

A chemically modified polymeric adsorbent was synthesized to evaluate the availability as an adsorbent for solid-phase extraction (SPE) of phenol and chlorophenols. Commercially available Amberlite XAD-2 and XAD-4 resins were modified with macrocyclic protoporphyrin IX (PPIX) through the ketone linkage. Adsorption isotherms were obtained by batch experiments and the data were fitted to the Freundlich equation to calculate the adsorption parameters. Breakthrough volumes were measured by column experiments. Physical properties such as surface area, average pore diameter and micropore volume of resins were measured to correlate with the adsorption characteristics. As a result, adsorption capacity was increased for the chemically modified resins and it can be concluded that the increase of pi-pi interaction due to the introduction of the porphyrin molecule is the major factor for the increase of the adsorption capacity.

Adsorption↗
PubMed2001

Capillary electrophoresis study on the micellization and critical micelle concentration of sodium dodecyl sulfate. Influence of solubilized solutes.

The influence of solubilized solutes on the micellization and critical micelle concentration (CMC) of sodium dodecyl sulfate (SDS) were investigated by means of capillary electrophoresis (CE). Three different structural types of test solutes, including chloropyridines. chlorophenols and cephalosporins with different binding strength to SDS micelles, were selected in this study. The variations of the effective electrophoretic mobility of these solutes as a function of SDS concentration in the premicellar and micellar regions were analyzed. Interestingly, the results indicate that, in the presence of these solubilized solutes, the micellization of SDS may occur over a range of SDS concentration, with the aggregate size increasing over this range. Depending on the nature of solubilized solutes and the extent of the interactions between solubilized solutes and SDS micelles, the CMC value of SDS may vary significantly. The incorporation of solubilized solutes into SDS micelles to form mixed micelles is proposed to interpret the migration behavior of solubilized solutes in CE.

Cefazolin↗
PubMed1977

Use of ethyl ethers, deuteriomethyl ethers and cyclic n-butylboronates of hydroxychlorobiphenyls in identification of metabolites of polychlorinated biphenyls.

The mass spectra and gas chromatographic properties of a number of chlorobiphenylols, chlorobiphenyldiols, chlorophenols and naphthols, as well as their methyl, deuteriomethyl and ethyl ethers and some cyclic n-butylboronates have been investigated. Metabolism experiments with 4'-chloro-4-biphenylol showed that the selective use of ethylation and methylation is most effective in both detection and structure elucidation of metabolites partly methylated by metabolic processes. The usefulness of deuteriomethylation in such studies seems to be limited. The formation of cyclic n-butylboronates provides specific information on o-dihydroxy derivatives of chlorobiphenyls.

Animals↗
PubMed1991

Evaluation of eluents in thermospray liquid chromatography-mass spectrometry for identification and determination of pesticides in environmental samples.

The influence of different eluents in positive and negative ion mode thermospray liquid chromatography-mass spectrometry was studied with several groups of pesticides, including carbamates, chlorotriazines, phenylureas, phenoxy acids and organophosphorus and quaternary ammonium compounds, and the corresponding degradation products. Using the positive ion mode in combination with reversed-phase eluents the base peaks generally corresponded either to [M + H]+ for the chlorotriazines and their hydroxy metabolites or to [M + NH4]+ for the carbamates, the phenylureas, the organophosphorus pesticides and their oxygen analogues. In the negative ion mode different processes such as (dissociative) electron-capture and anion attachment mechanisms occurred. Fragment ions such as [M - CONHCH3]- for the carbamates, [M - H]- for the chlorotriazines, phenylureas and chlorinated phenoxy acids and [M].-, [M - R]- (R being a methyl or ethyl group) for organophosphorus pesticides were usually formed. Depending on the eluent additive used (ammonium acetate, ammonium formate and/or chloroacetonitrile), three different adduct ions were formed: [M + CH3COO]-, [M + HCOO]- and [M + Cl]-. Normal-phase eluents with cyclohexane, n-hexane and/or dichloromethane provided more structural information and enhanced the response of several compounds. The positive ion mode was useful for the detection of chlorinated phenoxy acids and chlorophenols which could not be detected in the positive ion mode using reversed-phase systems. The base peaks generally corresponded to [M].+, [M + H]+ or [M - Cl]+. For the characterization of difenzoquat, a quaternary ammonium pesticide of which trace level analysis is troublesome, a post-column ion-pair extraction system was used. An aqueous mobile phase with a sulphonate-type counter ion was applied and an extraction solvent containing cyclohexane-dichloromethane-n-butanol (45:45:10) was used in thermospray liquid chromatography-mass spectrometry. Illustrative examples of the determination of residue levels of pesticides in soil matrices are shown.

Carbamates↗
PubMed1987

Chemical changes of organic compounds in chlorinated water. XIII. Gas chromatographic-mass spectrometric studies of the reactions of Irgasan DP 300 [5-chloro-2-(2,4-dichlorophenoxy)phenol] with chlorine in dilute aqueous solution.

The reactions of Irgasan DP 300 with chlorine in water were investigated by means of gas chromatography (GC) and GC-mass spectrometry. Irgasan DP 300 was shown to produce dichloro- and trichloro-2-(2,4-dichlorophenoxy)phenols in chlorine-treated water, followed by the decomposition of these intermediates to chlorophenols. No polychlorinated dibenzo-p-dioxins were detected in chlorine-treated Irgasan DP 300 solutions. The production of some of these compounds is dependent on the number of equivalents of chlorine per mol of compound and on the reaction pH.

Carbanilides↗
PubMed2002

Optimization of a derivatization-solid-phase microextraction method for the analysis of thirty phenolic pollutants in water samples.

Solid-phase microextraction (SPME) coupled to gas chromatography-mass spectrometry has been applied to the extraction of 30 phenol derivatives from water samples. Analytes were in situ acetylated and headspace solid-phase microextraction was performed. Different parameters affecting extraction efficiency were studied. Optimization of temperature, type of microextraction fiber and volume of sample has been done by means of a mixed-level categorical experimental design, which allows to study main effects and second order interactions. Five different fiber coatings were employed in this study; also, extraction temperature was studied at three levels. Both factors, fiber coating and extraction temperature, were important to achieve high sensitivity. Moreover, these parameters showed a significant interaction, which indicates the different kinetic behavior of the SPME process when different coatings are used. It was found that 75 microm carboxen-polydimethylsiloxane and 100 microm polydimethylsiloxane, yield the highest responses. The first one is specially appropriated for phenol, methylphenols and low chlorinated chlorophenols and the second one for highly chlorinated phenols. The two methods proposed in this study shown good linearity and precision. Practical applicability was demonstrated through the analysis of a real sewage water sample, contaminated with phenols.

Gas Chromatography-Mass Spectrometry↗
PubMed2002

Development of supercritical fluid extraction with a solid-phase trapping for fast estimation of toxic load of polychlorinated dibenzo-p-dioxins-dibenzofurans in sawmill soil.

A method consisting of automated supercritical fluid extraction (SFE) with simultaneous cleanup by a solid-phase trap was developed for fast analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in soil. SFE was optimised to replace conventional liquid-based methods in routine analyses of PCDD/PCDFs in sawmill soil contaminated by a chlorophenol formulation. PCDD/PCDFs were quantitatively extracted in 60 min using CO2 at 400 atm and 100 degrees C without a modifier. A trap containing a small amount of activated carbon mixed with Celite efficiently collected PCDD/PCDFs after SFE. After SFE co-extracted impurities were eluted out from the trap with 4 ml of hexane and PCDD/PCDFs were eluted with 10 ml of toluene. The concentrations and TCDD-equivalent of PCDD/PCDFs corresponded to the results of traditional solvent extraction method (Soxhlet) in six sawmill soils tested. The performance of the trap was maintained over a long period of time (nearly 100 extractions).

Benzofurans↗
PubMed2003

Automated hollow fiber-protected dynamic liquid-phase microextraction of pesticides for gas chromatography-mass spectrometric analysis.

Dynamic liquid-phase microextraction (LPME) controlled by a programmable syringe pump was evaluated for extracting pesticides in water prior to GC-MS analysis. A conventional microsyringe with a 1.3-cm length of hollow fiber attached to its needle was connected to a syringe pump to perform the extraction. The microsyringe was used as both the microextraction device as well as the sample introduction device for GC-MS analysis. The attached hollow fiber served as the "holder" and protector" of 3 microl of organic solvent. The solvent was repeatedly withdrawn into and discharged from the hollow fiber by the syringe pump. Pesticides were extracted from 4-ml water samples into the organic solvent impregnated in the hollow fiber. The effects of organic solvents, plunger movement pattern, agitation and extraction time were investigated. Good repeatabilities of extraction performance were obtained, with the RSD values ranging from 3.0% (alachlor) to 9.8% (4-chlorophenol) for the 14 pesticides; most RSD values were under 5.0%. The method provided a 490-fold preconcentration of the target pesticides. The limits of detection were in the range of 0.01-5.1 microg/l (S/N = 3) in the GC-MS selected ion monitoring mode. In addition, sample clean-up was achieved during LPME because of the selectivity of the hollow fiber, which prevented undesirable large molecules from being extracted. A slurry sample (mixture of 40 mg soil/ml of water) containing seven pesticides was extracted using this method which also gave good linearity and precision (most RSDs <7.0%, n = 3).

Gas Chromatography-Mass Spectrometry↗
PubMed2003

Prediction of the behaviour of organic pollutants using cloud point extraction.

A preconcentration study based on the cloud point phenomenon was carried out for a set of triazine herbicides, three of them chloro-substituted and three of them methylthio-substituted. Concentration factors and recoveries were calculated as function of the percentage of the non-ionic surfactant Triton X-114 employed. From these values, obtained from a cloud point extraction (CPE) procedure, the distribution coefficient between the Triton X-114 micelles and water, Kc, prior to CPE was calculated for each triazine and related to the corresponding octanol-water partition coefficient, Kow. In order to confirm the results obtained with the triazine herbicides, two sets of data from chemically different organic pollutants--organophosporous and chlorophenols--obtained from the literature were assessed, concluding that they display a similar behaviour to that of the triazine herbicides. This can be used to predict the CPE behaviour of other organic pollutants from their octanol-water partition coefficients. The Kc values were compared with the analyte concentration ratio in the surfactant-rich phase and aqueous phase (Ksa) with a view to obtaining a link between the analyte behaviour prior to and after cloud point extraction procedures.

Environmental Pollutants↗
PubMed1997

Analytical methods for the determination of organochlorine compounds. Application to environmental samples in the Slovak Republic.

The paper deals with the isolation of chlorinated phenols, benzenes and insecticides from water, soil and vegetable samples. A review of the current procedures is presented. Solid-phase extraction on Empore extraction discs was experimentally evaluated for isolation of the compounds from surface and ground waters. For the isolation of chlorophenols from soil and vegetable samples, a method of simultaneous steam distillation/extraction was elaborated which proved to be also applicable for waste waters and sludges. Chlorinated insecticides and benzenes were extracted from soil and vegetable samples with the Soxhlet procedure. Final determinations were carried out by GC-electron-capture detection. The recoveries of the methods were well over 70%, with relative standard deviations below 14%. Samples of surface and ground waters, soil and vegetables, mostly from the vicinity of chemical and municipal waste dumping sites, were analysed. The highest contamination levels were found for chlorinated phenols in surface water from the vicinity of a former chemical waste dumping place where the concentrations of 2,6-dichlorophenol and pentachlorophenol were 4.3 and 3.9 micrograms l-1, respectively.

Benzene↗
PubMed2001

Use of Fenton reagent to improve organic chemical biodegradability.

Fenton reagent has been used to test the degradation of different organic compounds (formic acid, phenol, 4-chlorophenol, 2,4-dichlorophenol and nitrobenzene) in aqueous solution. A stoichiometric coefficient for the Fenton reaction was found to be 0.5 mol of organic compound/mol of hydrogen peroxide, except for the formic acid where a value of approximately one was obtained (due to the direct formation of carbon dioxide). The treatment eliminates the toxic substances and increases the biodegradability of the treated water (measured as the ratio BOD5/COD). Biodegradability is attained when the initial compound is removed.

Biodegradation, Environmental↗
PubMed2000

EOX and organochlorine compounds in fish and ringed seal samples from Lake Ladoga, Russia.

Information about the pollution of Lake Ladoga, the largest lake in Europe, has been controversial. Various effluents and drainage waters affect the quality of the lake water. Wastewaters have caused eutrophication of parts of Lake Ladoga, but concentrations of persistent organic pollutants in the lake's food webs are poorly understood. In this study, concentrations of some organochlorine compounds, chlorophenols (CPs), and extractable organic halogen (EOX) were determined in smelt (Osmerus eperlanus), vendace (Coregonus albula), pikeperch (Lucioperca lucioperca), whitefish (Coregonus lavaretus), and the Ladoga seal (Phoca hispida ladogensis) from the northern part of the lake. The concentrations of organochlorine compounds in fish were low. Concentrations were between 0.07 and 0.15, 0.65 and 1.0, and 0.29 and 0.48 mg/kg lipids for hexachlorobenzene, total polychlorinated biphenyl (PCB) and p,p'-DDE, respectively. The results indicated biomagnification from smelt and vendace to pikeperch and ringed seal. In ringed seals, concentrations of PCB and DDT were 12 and 29 times higher than in fish used by ringed seals as major food sources.

Adipose Tissue↗
PubMed2000

Peroxidative degradation of selected PCB: a mechanistic study.

The enzyme-induced decomposition and biodegradation of PCB were investigated. 2,5-Dichlorobiphenyl (PCB 9) and 2,2',5,5'-tetrachlorobiphenyl (PCB 52) were used as example compounds to study efficiency and mechanism of the degradation processes. It was found that the application of horseradish peroxidase (HRP) together with defined amounts of hydrogen peroxide removed 90%, of the initial concentration of PCB 9 and 55% of the initial concentration of PCB 52 from an aqueous solution after a reaction period of 220 min. Dechlorination was observed as the initial step. Although the metabolites identified were mainly chlorinated hydroxybiphenyls, benzoic acids and non-substituted 1,1'-biphenyl, some higher chlorinated biphenyl isomers also appeared. The biodegradation of PCB 9 using the white rot fungus Trametes multicolor took about four weeks and reduction was about 80%, of the initial concentration. The metabolites produced (dichlorobenzenes, chlorophenols and alkylated benzenes) were not quite the same as those observed upon incubation with HRP.

Benzoic Acid↗
PubMedDate not supplied

Removal of dioxins and related aromatic hydrocarbons from flue gas streams by adsorption and catalytic destruction.

The dioxin removing capacity of the shell dedioxin system (SDDS-a Ti/V oxidative type catalyst) has been tested using the Umeå lab-scale incinerator over the temperature range 100-230 degrees C and at space velocities of 8000 and 40,000 h(-1). Other analogous organic compounds, such as PCBs, PAHs, chlorobenzenes and chlorophenols have also been investigated. Results show a high degree of dioxin removal already at 100 degrees C (82%), which occurs mainly by adsorption. When the temperature is raised a transition towards destruction is seen and at 150 degrees C, gas hour space velocity (GHSV) 8000 and at 230 degrees C, GHSV 40,000 virtually all removal is by destruction. High PCDD/F destruction efficiencies are reported (> 99.9%, based on I-TEQ); the other dioxin-related species and PAHs are also removed and destroyed to a significant extent. The SDDS has proved to be an effective means of destroying organic compounds in the gas phase, particularly dioxins, at temperatures as low as 150 degrees C.

Journal Article↗
PubMed2001

Formation and inhibition of chloroaromatic micropollutants formed in incineration processes.

The formation pathways for chlorinated aliphatic and chlorinated aromatic compounds in technical incineration processes are reviewed. It is shown that acetylene is converted to chloroaromatic compounds including PCDD/F in a special flow reactor by catalytic activity of CuCl2 in the temperature regime of a post-combustion zone of technical incinerators. Mechanistic pathways begin with chlorination of acetylene. Dichloroacetylene is further condensed to C-4 and C-6 units. Hexachlorobenzene is the dominant aromatic compound and a likely precursor to chlorinated phenols and PCDD/F. Two specific mechanisms of formation of chlorinated aromatic compounds including PCDD/F have been advanced. Both mechanisms begin with the formation of dichloroacetylene from flame pyrolysis products like acetylene. Condensation of dichloroacetylene is mediated by copper species via metallacyclic intermediates and/or a catalytic cycle involving copper stabilized trichlorovinyl radicals. The final pathways of conversion of chlorinated benzenes to PCDD/F via chlorophenols are under active investigation.

Acetylene↗
PubMed2001

Embryonic development assay with Daphnia magna: application to toxicity of aniline derivatives.

An assay system using Daphnia magna embryos was applied to investigate the adverse effects of aniline derivatives. The data were compared with our previous data for chlorophenols. This new assay provides useful information to evaluate the toxicity of chemicals and the differences in sensitivity between the life stages. The effects of 15 aniline derivatives on embryonic development of D. magna embryos were determined. At the start of exposure, 2-6-h old eggs (between stages 1 and 2, round in shape, diameter approx. 400 microm), were used. In control and solvent control groups, embryonic development from an egg to a free-swimming animal proceeded completely within 3 days with more than 90% hatchability. Median effective concentrations (EC50s) to reduce the numbers hatched were determined and gross morphological abnormalities of hatched animals recorded. Anilines induced no obvious morphological abnormalities and no developmental delay although premature deaths occurred. However, they affected the number of embryos hatching in a dose-dependent manner. In addition, this embryo assay was more sensitive to aniline derivatives (except for aniline) than acute juveniles immobilization assay. Ratios of 48-h EC50 (juvenile)/3-day EC50 (embryo) for eight anilines were greater than 5.0. Particularly, the ratios of 4-methyl-, 4-ethyl- and 3-methylaniline were 77, 23 and 11, respectively. EC50s for embryos and juveniles were poorly correlated (r = 0.41). This indicated that the sensitivities of the two life stages were different to the effects of anilines. EC50s were poorly correlated (r = -0.097) with the log Kow (1-octanol/water partition coefficient). These results were compared with previous results for phenols.

Aniline Compounds↗