Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “stability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources
PubMed1999

Putative interhelix ion pairs involved in the stability of myoglobin.

An earlier theoretical study predicted that specific ion pair interactions between neighboring helices should be important in stabilizing myoglobin. To measure these interactions in sperm whale myoglobin, single mutations were made to disrupt them. To obtain reliable DeltaG values, conditions were found in which the urea induced unfolding of holomyoglobin is reversible and two-state. The cyanomet form of myoglobin satisfies this condition at pH 5, 25 degrees C. The unfolding curves monitored by far-UV CD and Soret absorbance are superimposable and reversible. None of the putative ion pairs studied here makes a large contribution to the stability of native myoglobin. The protein stability does decrease somewhat between 0 and 0.1 M NaCl, however, indicating that electrostatic interactions contribute favorably to myoglobin stability at pH 5.0. A previous mutational study indicated that the net positive charge of the A[B]GH subdomain of myoglobin is an important factor affecting the stability of the pH 4 folding intermediate and potential ion pairs within the subdomain do not contribute significantly to its stability. One of the assumptions made in that study is tested here: replacement of either positively or negatively charged residues outside the A[B]GH subdomain has no significant effect on the stability of the pH 4 molten globule.

Animals↗
PubMed1999

Different equilibrium stability behavior of ScFv fragments: identification, classification, and improvement by protein engineering.

A classification of scFv fragments concerning their unfolding/refolding equilibria is proposed. It is based on the analysis of different mutants of the levan-binding A48 scFv fragment and the HER-2 binding 4D5 scFv fragment as well as a "hybrid" scFv carrying the VL domain of 4D5 and the VH domain of an A48 mutant. The denaturant-induced unfolding curves of the corresponding scFv fragments were measured and, if necessary for the classification, compared with the denaturation of the isolated domains. Depending on the relative intrinsic stabilities of the domains and the stability of the interface, the different scFv fragments were grouped into different classes. We also demonstrate with several examples how such a classification can be used to improve the stability of a given scFv fragment, by concentrating engineering efforts on the "weak part" of the particular molecule, which may either be the intrinsic stability of VL, of VH, or the stability of the interface. One of the scFv fragments obtained by this kind of approach is extremely stable, starting denaturation only at about 7 M urea. We believe that such extremely stable frameworks may be very suitable recipients in CDR grafting experiments. In addition, the thermodynamic equilibrium stabilities of seven related A48 scFv mutants covering a broad range of stabilities in urea unfolding were shown to be well correlated with thermal aggregation properties measured by light scattering and analytical gel filtration.

Chromatography, Gel↗
PubMed1999

Leucine 245 is a critical residue for folding and function of the manganese stabilizing protein of photosystem II.

In solution, Manganese Stabilizing Protein, the polypeptide which is responsible for the structural and functional integrity of the manganese cluster in photosystem II, is a natively unfolded protein with a prolate ellipsoid shape [Lydakis-Simantiris et al. (1999) Biochemistry 38, 404-414; Zubrzycki et al. (1998) Biochemistry 37, 13553-13558]. The C-terminal tripeptide of Manganese Stabilizing Protein was shown to be critical for binding to photosystem II and restoration of O(2) evolution activity [Betts et al. (1998) Biochemistry 37, 14230-14236]. Here, we report new biochemical, hydrodynamic, and spectroscopic data on mutants E246K, E246STOP, L245E, L245STOP, and Q244STOP. Truncation of the final dipeptide (E246STOP) or substitution of Glu246 with Lys resulted in no significant changes in secondary and tertiary structures of Manganese Stabilizing Protein as monitored by CD spectroscopy. The apparent molecular mass of the protein remained unchanged, both mutants were able to rebind to photosystem II, and both proteins reactivate O(2) evolution. Manganese Stabilizing Protein lacking the final tripeptide (L245STOP), or substitution of Glu for Leu245 dramatically modified the protein's solution structure. The apparent molecular masses of these mutants increased significantly, which might indicate unfolding of the protein in solution. This was verified by CD spectroscopy. Both mutant proteins rebound to photosystem II with lower affinities, and activation of O(2) evolution was decreased dramatically. Enhancement of these defects was observed upon removal of the final tetrapeptide (Q244STOP). These results indicate that Leu245 is essential to maintaining Manganese Stabilizing Protein's solution structure in a conformation that promotes efficient binding to photosystem II and/or for the subsequent steps that lead to enzyme activation. Based on an analysis of the properties of C-terminal mutations, a hypothesis for structural requirements for functional binding of Manganese Stabilizing Protein to photosystem II is presented. Effects of C-terminal mutations on the UV spectrum of Manganese Stabilizing Protein were also examined. Mutations that alter solution structure also affect a 293 nm absorption shoulder which is assigned to the only tryptophan residue, Trp241, in the protein, and this absorbance feature is shown to be a useful indicator of alterations to the Trp241 environment.

Circular Dichroism↗
PubMed2004

A C alpha-H...O hydrogen bond in a membrane protein is not stabilizing.

Hydrogen bonds involving a carbon donor are very common in protein structures, and energy calculations suggest that Calpha-H...O hydrogen bonds could be about one-half the strength of traditional hydrogen bonds. It has therefore been proposed that these nontraditional hydrogen bonds could be a significant factor in stabilizing proteins, particularly membrane proteins as there is a low dielectric and no competition from water in the bilayer core. Nevertheless, this proposition has never been tested experimentally. Here, we report an experimental test of the significance of Calpha-H...O bonds for protein stability. Thr24 in bacteriorhodopsin, which makes an interhelical Calpha-H...O hydrogen bond to the Calpha of Ala51, was changed to Ala, Val, and Ser, and the thermodynamic stability of the mutants was measured. None of the mutants had significantly reduced stability. In fact, T24A was more stable than the wild-type protein by 0.6 kcal/mol. Crystal structures were determined for each of the mutants, and, while some structural changes were seen for T24S and T24V, T24A showed essentially no apparent structural alteration that could account for the increased stability. Thus, Thr24 appears to destabilize the protein rather than stabilize. Our results suggest that Calpha-H...O bonds are not a major contributor to protein stability.

Amino Acid Substitution↗
PubMed2003

Effect of catalysis on the stability of metallic nanoparticles: Suzuki reaction catalyzed by PVP-palladium nanoparticles.

The small size of nanoparticles makes them attractive in catalysis due to their large surface-to-volume ratio. However, being small raises questions about their stability in the harsh chemical environment in which these nanoparticles find themselves during their catalytic function. In the present work, we studied the Suzuki reaction between phenylboronic acid and iodobenzene catalyzed by PVP-Pd nanoparticles to investigate the effect of catalysis, recycling, and the different individual chemicals on the stability and catalytic activity of the nanoparticles during this harsh reaction. The stability of the nanoparticles to the different perturbations is assessed using TEM, and the changes in the catalytic activity are assessed using HPLC analysis of the product yield. It was found that the process of refluxing the nanoparticles for 12 h during the Suzuki catalytic reaction increases the average size and the width of the distribution of the nanoparticles. This was attributed to Ostwald ripening in which the small nanoparticles dissolve to form larger nanoparticles. The kinetics of the change in the nanoparticle size during the 12 h period show that the nanoparticles increase in size during the beginning of the reaction and level off toward the end of the first cycle. When the nanoparticles are recycled for the second cycle, the average size decreases. This could be due to the larger nanoparticles aggregating and precipitating out of solution. This process could also explain the observed loss of the catalytic efficiency of the nanoparticles during the second cycle. It is also found that the addition of biphenyl to the reaction mixture results in it poisoning the active sites and giving rise to a low product yield. The addition of excess PVP stabilizer to the reaction mixture seems to lead to the stability of the nanoparticle surface and size, perhaps due to the inhibition of the Ostwald ripening process. This also decreases the catalytic efficiency of the nanoparticles due to capping of the nanoparticle surface. The addition of phenylboronic acid is found to lead to the stability of the size distribution as it binds to the particle surface through the O(-) of the OH group and acts as a stabilizer. Iodobenzene is found to have no effect and thus probably does not bind strongly to the surface during the catalytic process. These two results might have an implication on the catalytic mechanism of this reaction.

Journal Article↗
PubMed2003

A detailed investigation of subsitituent effects on N-h bond enthalpies in aniline derivatives and on the stability of corresponding N-centered radicals.

The N-H bond dissociation enthalpies (BDE's) of 40 anilines (pGC(6)H(4)NHY) from series 1 to 4 with alpha-Y and p-G substituents and the stability of related radicals (pGC(6)H(4)Ndot;Y) were studied using ab initio (MP2) and density functional methods (B3LYP) with large basis sets. The results show that both methods reproduce earlier experimental BDEs within 2-3 kcal/mol and satisfactorily predict the alpha and remote substituent effects on BDEs (DeltaBDEs), as they reproduced the experimental DeltaBDEs within less than 1 kcal/mol. Furthermore, the conventional radical stabilization enthalpy (RSE = - DeltaBDE) was found to be invalid to represent the trend of the radical stabilization because the molecule effect (ME) can contribute more to RSE than the radical effect (RE) for certain series (1 and 4). These radicals are in fact stabilized by electron-withdrawing groups (EWGs) but destabilized by electron-donating groups (EDGs), a phenomenon just opposite to the observed O-behavior of many other aromatic heteroatomic radicals studied so far. These radicals are thus assigned as a new radical class, Class counter-O (or O) according to Walter's terminology. Moreover, the excellent multi-parametric Hammett-type correlations indicated that the para substituent effects on BDEs originate mainly from polar effects, but those on radical stability originate from both spin delocalization and polar effects. The atomic charge and spin population variations at a radical center due to p-G substitution were also found to correlate satisfactorily with REs. These results show that the spin delocalization effect should be explicitly considered in accounting for both DeltaBDEs and radical stabilization effects. Finally, an overall subsituent effect scale for radical stability has been proposed, and the overall substituent effect on the N-radicals was found to conform to the Capto-dative Principle.

Journal Article↗
PubMed1997

A Semiempirical Study of the Effect of Geometry and Methyl Substituents on the Stabilities of Protonated Cyclopropylcarbinyl Ketones: Resolution of the 7-Nortricyclanone Anomaly.

A long-standing anomaly regarding the difference in stabilities of a series of protonated cyclopropylcarbinyl ketones has been resolved. The enthalpies of protonation of the ketones to the oxocarbenium ions (DeltaH(i)) were calculated from the PM3 heats of formation of the ketones and ions using isodesmic cycles. The values of DeltaH(i) correlate well with the experimentally determined values of pK(R+) for the ketones in concentrated sulfuric acid. Methyl substitution on the cyclopropyl ring uniformly stabilizes the resulting ions. Orientation of the -OH(+) to the cyclopropyl affects stability as well: a syn (periplanar) orientation lowers stability, while an anti (antiperiplanar) orientation increases it, apparently because of charge repulsion between the protonated carbonyl and the partial positive charges on the ring carbons caused by carbinyl "resonance" stabilization. Decreasing the angle about the carbonyl carbon leads to a decrease in stability for all systems tested and appears to be a major source of destabilization of the nortricycle system relative to skeletal analogs with more open carbonyl bond angles. The more stable ions have pi HOMOs, while the nortricycle and related ions have sigma HOMOs, which is another source of destabilization of the nortricycle system. For comparison, the corresponding hydrocarbon carbenium ions were examined; similar orders of stability were identified.

Journal Article↗
PubMed1999

Methylenecyclopropane Rearrangement as a Probe for Free Radical Substituent Effects. sigma (*) Values for Potent Radical-Stabilizing Nitrogen-Containing Substituents.

A series of nitrogen-containing 2-aryl-3,3-dimethylmethylenecyclopropanes have been prepared and rearrangement rates to the corresponding 2-arylisopropylidenecyclopropanes have been measured. These rates are dependent on the nature of the nitrogen-containing group in the para-position of the aryl group. Rearrangement rates have been used to calculate sigma (*) values, which are a measure of the radical stabilizing ability of the substituent. Groups such as p-N=N-Bu-t, p-CH=N-Bu-t, p-NH(2), p-CH=N-OH, and p-CH=N-OCH(3), are "good" radical stabilizers. We have also classified groups such as p-CH=N-NMe(2), p-N=N-Ph, p-N=N(O)-Bu-t, p-CH=N(O)-Bu-t, and p-CH=N-O(-) M(+), which have an extraordinarily large radical stabilizing effect, as "Super Stabilizers". These substituents stabilize the transition state of the methylenecyclopropane rearrangement by extensive spin delocalization. In the case of the latter three substituents, nitroxyl type stabilization is proposed. Density functional calculations (B3LYP/6-31G) have been carried out on a series of nitrogen-containing substituted benzylic radicals. Rates of the methylenecyclopropane rearrangement correlate with radical stabilization energies (DeltaE) determined from an isodesmic reaction of substituted benzylic radicals with toluene. These calculations confirm substantial spin delocalization onto the nitrogen-containing substituents on the para-position of the benzylic radical.

Journal Article↗
PubMed2005

Phase stability relations in invariant systems.

Except for the trivial case of one-component systems, the conventional Schreinemakers phase stability analysis in invariant systems is shown to be thermodynamically and stoichiometrically inconsistent in that the partition of the stability relations into contributions coming from univariant subsystems is formulated only qualitatively. Although the stability relations in invariant systems are essentially additive (i.e., the stability relations in invariant system may be partitioned into a sum contributions coming from univariant subsystems), the quantitative form of this partition has never been considered. On the basis of a new approach to the stability of chemical species in multiple chemical reaction systems that has been recently developed by us (Fishtik, I. J. Phys. Chem. B, 2005, 109, 3851), we show how the stability relations in invariant systems may be uniquely partitioned into contributions coming from univariant reactions. This finding provides a simple algorithm for the construction of various types of thermodynamically consistent stability diagrams.

Journal Article↗
PubMed2005

Stabilization of excess charge in isolated adenosine 5'-triphosphate and adenosine 5'-diphosphate multiply and singly charged anions.

Multiply charged anions (MCAs) represent highly energetic species in the gas phase but can be stabilized through formation of molecular clusters with solvent molecules or counterions. We explore the intramolecular stabilization of excess negative charge in gas-phase MCAs by probing the intrinsic stability of the [adenosine 5'-triphosphate-2H](2-) ([ATP-2H](2-)), [adenosine 5'-diphosphate-2H](2-) ([ADP-2H](2-)), and H(3)P(3)O(10)(2-) dianions and their protonated monoanionic analogues. The relative activation barriers for decay of the dianions via electron detachment or ionic fragmentation are investigated using resonance excitation of ions isolated within a quadrupole trap. All of the dianions decayed via ionic fragmentation demonstrating that the repulsive Coulomb barriers (RCB) for ionic fragmentation lie below the RCBs for electron detachment. Both the electrospray ionization mass spectra (ESI-MS) and total fragmentation energies for [ATP-2H](2-), [ADP-2H](2-), and H(3)P(3)O(10)(2-) indicate that the multiply charged H(3)P(3)O(10)(2-) phosphate moiety is stabilized by the presence of the adenosine group and the stability of the dianions increases in the order H(3)P(3)O(10)(2-) < [ADP-2H](2-) < [ATP-2H](2-). Fully optimized, B3LYP/6-31+G* minimum energy structures illustrate that the excess charges in all of the phosphate anions are stabilized by intramolecular hydrogen bonding either within the phosphate chain or between the phosphate and the adenosine. We develop a model to illustrate that the relative magnitudes of the RCBs and hence the stability of these ions is dominated by the extent of intramolecular hydrogen bonding.

Adenosine Diphosphate↗
PubMed2004

Hydrolytic stability of organic monolayers supported on TiO2 and ZrO2.

The hydrolytic stability of C18 monolayers supported on TiO2 and ZrO2 was studied. Three types of monolayers were prepared from the following octadecyl modifiers: (1) octadecyldimethylchlorosilane (C18H37Si(CH3)2Cl); (2) octadecylsilane (C18H37SiH3); and (3) octadecylphosphonic acid (C18H37P(O)(OH)2). The hydrolysis of the surfaces prepared was studied under static conditions at 25 and 65 degrees C at pH 1-10. On the basis of the loss of grafted material, the stability of the monolayers fall in the following range: C18H37P(O)(OH)2 > or = C18H37SiH3 >> C18H37Si(CH3)2Cl. At 25 degrees C, monolayers from C18H37P(O)(OH)2 showed only approximately 2-5% loss in grafting density after one week at pH 1-10. The high stability of these monolayers was explained because of the strong interactions of the phosphonic acids with the substrates. Monolayers from C18H37Si(CH3)2Cl showed poor hydrolytic stability at any pH, which was explained because of the low stability of Ti-O-Si and Zr-O-Si bonds. Unlike monofunctional silanes, trifunctional silane (C18H37SiH3) yielded surfaces that showed good hydrolytic stability. This suggests that the stability of the monolayers from trifunctional silanes is primarily due to "horizontal" bonding (Si-O-Si or Si-OH...HO-Si) rather than due to bondingwith the matrix (M-O-Si). At 65 degrees C, all C18 surfaces become more susceptible to hydrolysis; however, the trend observed for 25 degrees C remained unchanged. Low-temperature nitrogen adsorption was used to study the adsorption properties of the monolayers as a function of their grafting density. The energy of adsorption interactions showed a significant increase as the grafting density of the monolayers decreased. The order of the alkyl groups in the monolayers, as assessed from CH2 stretching, decreased as the grafting density of the monolayers decreased.

Journal Article↗
PubMed2004

Cosurfactant effect of a semifluorinated alkane at a fluorocarbon/water interface: impact on the stabilization of fluorocarbon-in-water emulsions.

Previous work has demonstrated that semifluorinated alkanes CnF2n+1CmH2m+1 (FnHm diblocks), when used in conjunction with phospholipids, strongly stabilize fluorocarbon (FC)-in-water emulsions destined to be used as oxygen carriers. Although the presence of FnHm diblocks in the emulsion's interfacial phospholipid film was suggested to account for the observed stabilization, no direct proof of the diblock's location has been provided so far. We now report definite experimental evidence of the diblock's presence at the interfacial film, both on a macroscopic level by investigating the FC/water interface using the pendant drop method and directly on emulsions by monitoring their stability for various phospholipid chain lengths. We first establish that F8H16 has a strong cosurfactant effect with phospholipids [dimyristoylphosphatidylcholine (DMPC), dilaurylphosphatidylcholine (DLPC), dioctanoylphosphatidylcholine (PCL8)] at a perfluorooctyl bromide (PFOB)/water interface, as evidenced by a dramatic F8H16-concentration-dependent decrease of the interfacial tension. Where FC emulsions are concerned, we show that the stabilization effect, which consists of a decrease of the rate of molecular diffusion of the FC, depends strongly on the length of the phospholipid's fatty chain as compared to the length of the hydrocarbon segment, Hm, of the diblock. Stabilization is maximized when the Hm length is similar to that of the phospholipid's fatty chains. A strong mismatch between Hm and the phospholipid chain length can actually destabilize the emulsion. A different destabilization mechanism is then at work: coalescence. The presence of F8H16 at the interfacial film is further supported by the fact that perfluorodecyl bromide, a heavy analogue of PFOB that stabilizes PFOB emulsions by lowering the solubility and diffusibility of the emulsion's dispersed FC phase, exercises its stabilizing effect similarly for all the phospholipids investigated.

Journal Article↗
PubMed2004

Surface-tunable photoluminescence from block copolymer-stabilized cadmium sulfide quantum dots.

The static and time-resolved photoluminescence properties of polystyrene-b-poly(acrylic acid) (PS-b-PAA)-stabilized cadmium sulfide quantum dots (CdS QDs) have been characterized for the first time, demonstrating tunable emission spectra and quantum yields via different chemical treatments of the PAA layer. Samples with the PAA layer in its cadmium carboxylate form showed more-intense band-edge emission and relatively high quantum yields compared with samples in which the PAA layer was in its acid form. This activation effect is explained in terms of passivation of trap sites on the QD surface by specific interactions between the QD and the cadmium-neutralized PAA layer. Lifetimes of band-edge and trap state emission for the various samples ranged from 40 to 61 ns and 244 to 360 ns, respectively. Impressive long-term stability was also shown for a sample of cadmium-neutralized PS-b-PAA-stabilized QDs dispersed in toluene, which maintained 90% of its photoluminescence over 57 days aging under ambient conditions. It is also shown that Cd2+ activation of photoluminescence does not occur when Mg2+ ions are added to similar QD solutions, indicating potential of these block copolymer-stabilized QDs as Cd2+-selective sensors. Irrespective of chemical treatment of the PAA layer, the external PS brush layer effectively stabilized all samples in various organic solvents, resulting in clear CdS colloids with no observed precipitation over several months. Dynamic light scattering and gel permeation chromatography revealed differences in the aggregation numbers and hydrodynamic radii of colloidal QDs for different treatments of the PAA layer, attributed to the lower solubility of the poly(cadmium acrylate) blocks compared to the PAA blocks in the acid form. Finally, it was demonstrated that the PS-b-PAA-stabilized QDs could be well dispersed in PS homopolymer, producing optically transparent photoluminescent films which retained the emission features of the colloidal QDs. Stable and surface-tunable optical properties via the PAA layer and polymer solubility and processability via the PS layer make these PS-b-PAA-stabilized CdS QDs exciting "building blocks" for the bottom-up assembly of functional hierarchical materials for photonics, sensors, and bio-labeling applications.

Journal Article↗
PubMed2006

Effect of thermal treatment, ionic strength, and pH on the short-term and long-term coalescence stability of beta-lactoglobulin emulsions.

We present experimental results about the effects of thermal treatment, ionic strength, and pH on the protein adsorption and coalescence stability of freshly prepared (2 h after emulsification) and 6-day-stored emulsions, stabilized by the globular protein beta-lactoglobulin (BLG). In all emulsions studied, the volume fraction of the dispersed soybean oil is 30% and the mean drop diameter is d(32) approximately 40 microm. The protein concentration, C(BLG), is varied between 0.02 and 0.1 wt %, the electrolyte concentration, C(EL), between 1.5 mM and 1 M, and pH between 4.0 and 7.0. The emulsion heating is performed at 85 degrees C, which is above the denaturing temperature of BLG. The results show that, at C(BLG) > or = 0.04 wt %, C(EL) > or = 150 mM, and pH > or = 6.2, the heating leads to higher protein adsorption and to irreversible attachment of the adsorbed molecules, which results in enhanced steric repulsion between the protein adsorption multilayers and to higher emulsion stability. At low electrolyte concentration, C(EL) < or = 10 mM, the emulsion stability is determined by electrostatic interactions and is not affected significantly by the emulsion heating. The latter result is explained by electrostatic repulsion between the adsorbed protein molecules, which keeps them separated from each other and thus precludes the formation of disulfide covalent bonds in the protein adsorption layer. The coalescence stability of heated and nonheated emulsions is practically the same and does not depend on C(EL), when pH is around the isoelectric point (IEP) of the protein molecules. This is explained with the adsorption of uncharged BLG molecules, in compact conformation, which stores the reactive sulfhydryl groups hidden inside the molecule interior, thus preventing the formation of covalent intermolecular bonds upon heating. We studied also the effect of storage time on the stability of heated and nonheated emulsions. The stability of nonheated emulsions (C(BLG) = 0.1 wt %, C(EL) > or = 150 mM, and pH = 6.2) significantly decreases after 1 day of storage (aging effect). In contrast, no aging effect is observed after emulsion heating. FTIR spectra of heated and nonheated, fresh and aged emulsions suggest that the aging effect is caused by slow conformational changes of the protein molecules in the adsorption layer, accompanied with partial loss of the ordered secondary structure of the protein and with the formation of lateral noncovalent bonds (H-bonds and hydrophobic interactions) between the adsorbed molecules. After thermal treatment of the BLG emulsions, the molecules preserve their original secondary structure upon storage, which eliminates the aging effect.

Animals↗
PubMed2006

Effect of hydrophobicity inside PEO-PPO-PEO block copolymer micelles on the stabilization of gold nanoparticles: experiments.

In this paper we present the effect of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer micelles and their hydrophobicity on the stabilization of gold nanoparticles. Gold nanoparticles were prepared by a method developed by Sakai et al. (Sakai, T.; Alexandridis, P. Langmuir 2004, 20, 8426). An absorption centered at 300-400 nm in time-dependent UV spectra provided evidence that the very first step of the synthesis was to form primary gold clusters. Then the gold clusters grew in size and were stabilized by block copolymer micelles. The stabilization capacities of the micelles were modulated by tuning the block copolymer concentration and composition and by adding salts. With good stabilization, gold particles were spherical and uniform in size with a diameter of 5-10 nm. Otherwise they were aggregates with irregular shapes such as triangular, hexagonal, and rodlike. The presence of a small amount of NaF significantly increased the stabilization capacity of the micelles and consequently modified the quality of the gold particles. Using FTIR and 1H NMR spectroscopy, micellization of the block copolymers and hydrophobicity of the micelles were proven very important for the stabilization. A higher hydrophobicity of the micelle cores was expected to favor the entrapment of primary gold clusters and the stabilization of gold nanoparticles.

Colloids↗
PubMed2006

Drug nanoparticles by antisolvent precipitation: mixing energy versus surfactant stabilization.

Organic itraconazole (ITZ) solutions were mixed with aqueous solutions to precipitate sub-300 nm particles over a wide range of energy dissipation rates, even for drug loadings as high as 86% (ITZ weight/total weight). The small particle sizes were produced with the stabilizer poloxamer 407, which lowered the interfacial tension, increasing the nucleation rate while inhibiting growth by coagulation and condensation. The highest nucleation rates and slowest growth rates were found at temperatures below 20 degrees C and increased with surfactant concentration and Reynolds number (Re). This increase in the time scale for growth reduced the Damkohler number (Da) (mixing time/precipitation time) to low values even for modest mixing energies. As the stabilizer concentration increased, the average particle size decreased and reached a threshold where Da may be considered to be unity. Da was maintained at a low value by compensating for a change in one variable away from optimum conditions (for small particles) by manipulating another variable. This tradeoff in compensation variables was demonstrated for organic flow rate vs Re, Re vs stabilizer concentration, stabilizer feed location (organic phase vs aqueous phase) vs stabilizer concentration, and stabilizer feed location vs Re. A decrease in the nucleation rate with particle density in the aqueous suspension indicated that secondary nucleation was minimal. A fundamental understanding of particle size control in antisolvent precipitation is beneficial for designing mixing systems and surfactant stabilizers for forming nanoparticles of poorly water soluble drugs with the potential for high dissolution rates.

Itraconazole↗
PubMed2003

Prediction of in vitro metabolic stability of calcitriol analogs by QSAR.

The metabolic stability of a drug is an important property for potential drug candidates. Measuring this property, however, can be costly and time-consuming. The use of quantitative structure-activity relationships (QSAR) to estimate the in vitro stability is an attractive alternative to experimental measurements. A data set of 130 calcitriol analogs with known values of in vitro metabolic stability was used to develop QSAR models. The analogs were encoded with molecular structure descriptors computed mainly with the commercial software QikProp and DiverseSolutions. Variable selection was carried out by five different variable selection techniques and Partial Least Squares Regression (PLS) models were generated from the 130 analogs. The models were used for prediction of the metabolic stability of 244 virtual calcitriol analogs. Twenty of the 244 analogs were selected and the in vitro metabolic stability was determined experimentally. The PLS models were able to predict the correct metabolic stability for 17 of the 20 selected analogs, corresponding to a prediction performance of 85%. The results clearly demonstrate the utility of QSAR models in predicting the in vitro metabolic stability of calcitriol analogs.

Calcitriol↗
PubMed2006

Ten-year stability of personality disorders among outpatients with mood disorders.

One of the core propositions in most clinical and descriptive models of personality disorders (PDs) is that these conditions are stable over time. However, the available empirical literature suggests that PDs are far less stable than these models imply. The present study examines the 10-year stability of PDs in a sample of depressed outpatients who were assessed for the full range of Axis II conditions across 5 assessments. Three primary issues are addressed: (a) the stability of categorical PD diagnoses, (b) the relative stability of dimensional PD traits, and (c) the absolute stability of PD traits. The stability of PD diagnoses was poor to fair, and the stability of dimensional PD traits was fair to moderate. Growth curve analyses revealed complex patterns of change in absolute scores for PD traits across the 10-year interval. Stability of PDs was generally comparable to that of anxiety disorder diagnoses and normal personality traits.

Adolescent↗