Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “REINFORCEMENT”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

Bioabsorbable staple-line reinforcement to reduce staple-line bleeding in the transection of mesenteric vessels during laparoscopic colorectal resection: a pilot study.

BACKGROUND: Staple line hemorrhage and leak are the 2 most dreaded complications of laparoscopyassisted resection of colorectal cancer (LARCC). Recently, anastomotic staple lines have been reinforced with a range of absorbable and non-absorbable bioprosthetic reinforcement materials. This pilot prospective study used the bioabsorbable Seamguard (BSG; WL Gore & Associates, Flagstaff, AZ) for routine reinforcement of the mesenteric vascular staple transection to prevent mesenteric hemorrhage and to assess its safety and feasibility in a consecutive series of laparoscopic colonic resections. METHODS: Twenty-five patients consecutively scheduled to undergo LARCC were enrolled in the study. All operations were performed with a standard LARCC technique which included loading of the BSG sleeves onto the jaws of the cutter/stapler. RESULTS: There were 23 wholly LARCC cases and 2 open conversions. BSG was used in all 25 patients. No patient experienced staple-line bleeding or other complications during the surgical procedure. The mean number of staple-line reinforcement sleeves used was 2.6 (range, 2-4). The mean operative time was 118 minutes (range, 65-184 minutes). Additional measures to achieve hemostasis were not required in any case. The mean cost was US 475.20 dollars for the procedure. CONCLUSIONS: This small pilot study has shown the routine use of BSG mesenteric staple line reinforcement to be safe, quick and effective during LARCC.

Absorbable Implants↗

Short cervical length after history-indicated cerclage: is a reinforcing cerclage beneficial?

OBJECTIVE: The purpose of this study was to determine if a reinforcing cerclage improves outcome in women with a history-indicated cerclage who develop a short cervix on ultrasound. STUDY DESIGN: The management of women with a history-indicated transvaginal cerclage who subsequently developed a short cervix (< or = 25 mm) on transvaginal ultrasound before 24 weeks was retrospectively reviewed. Exposed subjects that received a reinforcing cerclage were compared with similar unexposed subjects that were followed with expectant management. The primary outcome was preterm delivery <35 weeks. RESULTS: Twenty-four eligible women were identified, of which 5 received a reinforcing cerclage and 19 were managed expectantly. There was no difference in patient demographics and risk factors between the exposed and unexposed groups. Reinforcing cerclage was associated with a significantly earlier gestational age at delivery (20.8 vs 32.9 weeks, P = .002) as well as higher rates of both preterm delivery <35 weeks (100% vs 32%, P = .01) and previable delivery <24 weeks (80% vs 16%, P = .01). CONCLUSION: In pregnancies with a history-indicated cerclage and subsequently diagnosed ultrasound cervical shortening before 24 weeks, placement of a reinforcing cerclage is associated with earlier delivery than expectant management.

Adult↗

Finite element and experimental analyses of polymer-based dental bridges reinforced by ceramic bars.

Dental bridges made of polymer materials reveal only low loading capacity. This paper analyzes possible improvements of the loading capacity of polymer-based dental bridges reinforced by incorporated ceramic bars. Finite element (FE) analyses were performed to study the stress distribution caused by the mastication process in the bridge material. In the experimental part of the study, the fracture load of dental bridges with and without ceramic bar reinforcement was evaluated. Critical stresses occur in the connector area between abutment and pontic of bridges without bar reinforcement. A suitably shaped ceramic bar incorporated into the polymer-based bridge can significantly reduce these critical stresses. The fracture load of the bridge was increased from 515 to 1603N by the bar reinforcement. We conclude from our study that a ceramic bar can significantly improve the loading capacity of a polymer-based dental bridge. The FE and the experimental analyses revealed that the detailed design of the ceramic bar is of decisive importance for the effectiveness of the suggested ceramic reinforcement.

Bite Force↗

Survival of resin-bonded porcelain veneer crowns placed with and without metal reinforcement.

OBJECTIVES: The purpose of this retrospective case study of dental records was to compare the long-term failure rates and modes for resin-bonded sintered feldspathic porcelain veneer crowns (RBPVCs) either containing or without metal substructure reinforcement. METHODS: Two prosthodontists placed 62 RBPVCs fabricated with, and 167 without, metal reinforcement in 143 older adolescent and adult patients treated in a private practice. Clinical judgement determined the type of crown design placed. Preparation margins were generally finished on enamel, and all crowns occluded with opposing teeth. Observations included the patients, operators, crown designs and failure modes. Chi-square or Fisher's exact tests and life table survival statistics were used to evaluate the findings (alpha = 0.05). RESULTS: Over five years, failures occurred in 14.5% of RBPVCs fabricated with, and in 18.6% without, metal reinforcement. Cumulative survival estimates were 74.3 +/- 8.5(Standard Error)% and 72.9 +/- 4.8(SE)%, respectively (P = 0.96). Mandibular posterior crowns comprised 27.1% of the placements, but 47.5% of the failures. Bulk fracture of porcelain occurred in 7.0% of the crowns, all without metal reinforcement. Minor porcelain fractures and debonding were less frequent in both types of crowns. Persistent pulpitis occurred in 3.5% of all teeth. CONCLUSIONS: There was a significant risk of failure for sintered porcelain RBPVCs placed as posterior restorations. Although metal reinforcement was able to reduce the risk of bulk fracture of porcelain, other causes of failure were less affected.

Adolescent↗

Inhibition of fatty acid beta-oxidation attenuates the reinforcing effects and palatability to fat.

OBJECTIVE: We investigated the effects of the energy signal on the reinforcing effects and palatability to fat in mice. METHODS: To examine the effects of postingestive energy signal, mice were injected with 400 micromol/kg body mass of mercaptoacetate, a beta-oxidation blocker or with saline (control group). Reinforcing effects and palatability response were examined with the conditioned place preference and one-bottle tests, respectively. RESULTS: In conditioned place preference tests, the mercaptoacetate group exhibited reinforcing effects when offered a 40% sucrose solution, which is not metabolized by the beta-oxidation pathway, but not when offered 100% corn oil. The control group exhibited reinforcing effects when offered the sucrose solution and when offered corn oil. In one-bottle tests, the control group exhibited palatability to corn oil, but the mercaptoacetate group did not. Consumption of sucrose solution was identical for both groups. CONCLUSIONS: These results suggest that postingestive energy signal influences the reinforcing effects and palatability of fat.

Animals↗

Fracture resistance of metal-free composite crowns-effects of fiber reinforcement, thermal cycling, and cementation technique.

STATEMENT OF PROBLEM: The improved mechanical properties of contemporary composites have resulted in their extensive use for the restoration of posterior teeth. However, the influence of fiber reinforcement, cementation technique, and physical stress on the fracture resistance of metal-free crowns is unknown. PURPOSE: This in vitro study evaluated the effect of fiber reinforcement, physical stress, and cementation methods on the fracture resistance of posterior metal-free Sinfony crowns. MATERIAL AND METHODS: Ninety-six extracted human third molars received a standardized tooth preparation: 0.5-mm chamfer preparation and occlusal reduction of 1.3 to 1.5 mm. Sinfony (nonreinforced crowns, n=48) and Sinfony-Vectris (reinforced crowns, n=48) crowns restoring original tooth contour were prepared. Twenty-four specimens of each crown type were cemented, using either glass ionomer cement (GIC) or resin cement. Thirty-two crowns (one third) were stored in humidity for 48 hours. Another third was exposed to 10,000 thermal cycles (TC) between 5 degrees C and 55 degrees C. The remaining third was treated with thermal cycling and mechanical loading (TCML), consisting of 1.2 million axial loads of 50 N. The artificial crowns were then vertically loaded with a steel sphere until failure occurred. Significant differences in fracture resistance (N) between experimental groups were assessed by nonparametric Mann-Whitney U-test (alpha=.05). RESULTS: Fifty percent of the Sinfony and Sinfony-Vectris crowns cemented with glass ionomer cement loosened after thermal cycling. Thermal cycling resulted in a significant reduction in the mean fracture resistance for Sinfony crowns cemented with GIC, from 2037 N to 1282 N (P=.004). Additional fatigue produced no further effects. Fiber reinforcement significantly increased fracture resistance, from 1555 N to 2326 N (P=.001). The minimal fracture resistance was above 600 N for all combinations of material, cement and loading. CONCLUSION: Fracture resistance of metal-free Sinfony crowns was significantly increased by fiber reinforcement. Adhesive cementation may be recommended to avoid cementation failure.

Air Abrasion, Dental↗

Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials.

STATEMENT OF PROBLEM: Many current fabrication protocols for dental fiber-reinforced composites use hand lay-up techniques and technician design input. Little information exists regarding how the manipulation of the cross-sectional design of a prosthesis might affect the modulus of elasticity and toughness. PURPOSE: The aim of this study was to determine the effect of simple and complex cross-sectional designs on the modulus of elasticity and toughness of fiber-reinforced composite used for dental prostheses. MATERIAL AND METHODS: Two particulate composites (BelleGlass HP and Targis) were reinforced with ultra-high-molecular-weight polyethylene fiber ribbon (Connect), woven E-glass fibers (Vectris Frame), or unidirectional R-glass fibers (Vectris Pontic). A range of fiber positions, orientations, or geometries were incorporated into the rhombic specimens (2 x 2 x 25 mm(3)) to achieve simple and complex experimental cross-sectional designs. The control specimen did not contain fiber reinforcement. Specimens (n=6) were stored 1 week in distilled water at 37 degrees C prior to 3-point load testing to determine the modulus of elasticity (GPa) and toughness (MPa). The data within each main fiber group were subjected to 1-way analysis of variance and a Tukey post hoc test (alpha=.05). Cross-sections of randomly selected test specimens (n=2) were made for scanning electron microscope (SEM) analysis of the fiber distribution. RESULTS: The mean modulus of elasticity varied from 8.7 +/- 2.0 GPa (Targis control) to 21.6 +/- 1.4 GPa (2 unidirectional glass fiber reinforcements, 1 each at the tension side and the compression side). Mean toughness varied from 0.07 +/- 0.02 MPa (unidirectional glass fiber positioned at the compression side) as the lowest mean, to 4.53 +/- 0.89 MPa (unidirectional glass fiber positioned at the tension side) as the highest. Significant differences were identified between specimen groups in each main category (all groups P<.001, except modulus of elasticity of the woven E-glass groups, where P=.003). SEM micrographs showed fiber distribution in the cross section of test specimens to correspond with the intended fiber geometry. CONCLUSION: The modulus of elasticity of the composite specimens increased when 1 or more glass fiber groups were located at the compression side of the specimen. Toughness was most effectively increased when 1 or more fiber groups were located at the tension side of the specimen.

Analysis of Variance↗

Modeling of eating pathology and social reinforcement of the thin-ideal predict onset of bulimic symptoms.

Although social influences are thought to promote bulimic pathology, little research has examined the effects of multiple socialization agents, or considered both modeling and social reinforcement processes. Accordingly, these two studies tested whether social reinforcement of the thin-ideal, and modeling of abnormal eating behavior by family, peers, and the media, (i) correlated with bulimic symptoms in a sample of young adult female (N = 114) and (ii) predicted the onset of bulimic behavior in a sample of adolescent females (N = 218). Social reinforcement of the thin-ideal by family, peers, and media was correlated with bulimic symptoms; family and peer social reinforcement prospectively predicted the onset of binge eating and purging. Family and peer, but not media, modeling of abnormal eating behavior was associated with concurrent bulimic symptoms, and predicted the onset of binge eating and purging. Results suggest that both social reinforcement and modeling processes may promote bulimic pathology, but imply that the effects are limited to family and peer influences.

Adolescent↗

Fracture strengths of provisional restorations reinforced with plasma-treated woven polyethylene fiber.

STATEMENT OF PROBLEM: Fracture strength of interim fixed partial prosthesis is of great concern, especially in long-span restorations or areas of heavy occlusal stress. PURPOSE: Effects of a plasma-treated woven polyethylene fiber (Ribbond) on the fracture strength of polymethyl methacrylate (Coldpac) and a resin-based two-phase curing provisional restorative material (Provipont DC) were evaluated. MATERIAL AND METHODS: A polyvinyl siloxane template was used to fabricate three-unit posterior provisional prostheses on a stainless steel die with two abutments 22 mm apart. The reinforced groups were fabricated by affixing 3 mm wide pieces of fiber treated with methyl methacrylate monomer or polyisocyanate (activator part of Provipont DC) on the occlusal surfaces of abutments. The interim materials were mixed, according to the manufacturers' specifications, and placed in the template. The template was pressed on the die and held secure until complete setting of the material occurred by light curing (Provipont DC) or autopolymerization (PMMA). The specimens were divided into 4 groups of 10 each (A, reinforced Provipont DC; B, unreinforced Provipont DC; C, reinforced PMMA; and D, unreinforced PMMA). A central compressive load force was exerted on the specimen to determine the fracture load of the restorations. RESULTS: The data revealed mean fracture loads of A, 65.59 +/- 11.27 kg; B, 46.59 +/- 14.84 kg; C, 53.46 +/- 7.76 kg; and D, 49.86 +/- 14.44 kg. CONCLUSION: Plasma-treated polyethylene reinforced PMMA restorations showed no significant increase in fracture loads when compared with unreinforced restorations (p > 0.10), whereas reinforced resin-based restorations revealed significantly higher fracture loads (p < 0.01) than the unreinforced resin-based and PMMA provisional restorations.

Bisphenol A-Glycidyl Methacrylate↗

Water sorption and solubility of glass fiber-reinforced denture polymethyl methacrylate resin.

Polymethyl methacrylate (PMMA) absorbs water slowly over a period of time, primarily because of the polar properties of the resin molecules. The aim of this study was to determine the water sorption and solubility of heat-cured and chemical-cured glass fiber (GF) PMMA composite used in dentures. The test specimens (n = 5) were fabricated from experimental, unidirectional, continuous GF reinforcement; the GF concentration of the test specimens was approximately 11% by weight. Water sorption and solubility were tested in accordance with International Standards Organization specification No. 1567. The results revealed that the type of acrylate had more of an effect on water sorption than did the presence of GF reinforcement in the test specimen (p = 0.001 and p = 0.049, respectively). In the GF-reinforced test specimens the type of PMMA also affected the water sorption values (p = 0.006). GF reinforcement affected the solubility values of the test specimen (p = 0.002), but the type of acrylate had no effect on solubility (p = 0.585). The results of this study suggest that the water sorption and solubility of unreinforced PMMA and PMMA reinforced with GF are in accordance with International Standards Organization specification No. 1567.

Absorption↗

Clinical and scanning electron microscopic evaluation of fiber-reinforced inlay fixed partial dentures: preliminary results after one year.

STATEMENT OF PROBLEM: Restorative dentistry searches for nonmetal reinforcement of esthetic fixed partial dentures (FPDs). PURPOSE: This clinical study evaluated conservative fiber-reinforced composite FPDs bonded to inlay abutments. MATERIAL AND METHODS: Twenty fiber-reinforced composite inlay FPDs were made for 15 patients. Restorations were manufactured with the Targis Vectris glass-fiber-reinforced composite system and a simplified laboratory technique. The 20 bonded inlay FPDs were examined clinically and by SEM after 1 year. RESULTS: All 20 FPDs were intact at the 1-year examination. There were no signs of fracture, surface defects, or excessive wear with SEM. SEM marginal analysis exhibited 91.6% +/- 5% excellent margins at the tooth-luting composite interface and 86. 1% +/- 8% excellent margins at luting composite/restoration interface. CONCLUSION: On the basis of the results of this descriptive study, bonded glass-fiber-reinforced composite inlay FPDs were considered clinically successful at the 1-year examination.

Composite Resins↗

The Fasting Hyperglycaemia Study: II. Randomized controlled trial of reinforced healthy-living advice in subjects with increased but not diabetic fasting plasma glucose.

Self-referred subjects (N = 227) thought to be at risk of developing non-insulin-dependent diabetes mellitus (NIDDM) and with fasting plasma glucose (FPG) in the range of 5.5 to 7.7 mmol.L-1 on two consecutive tests 2 weeks apart were randomized to reinforced or basic healthy-living advice. They were simultaneously allocated either to a sulfonylurea group or a control group in a two-by-two factorial design. A total of 201 subjects in three English and two French centers completed 1 year's follow-up study. Reinforced advice recommending dietary modification and increased exercise was given every 3 months, and basic advice was given once at the initial visit. Glycemia was monitored by FPG, dietary compliance by body weight and food diaries, and fitness compliance by bicycle ergometer assessment and exercise diaries. Both reinforced and basic advice groups had a significant mean reduction in body weight (1.5 kg) at 3 months, although the weight subsequently returned to baseline. After 1 year, subjects allocated to reinforced advice versus basic advice (1) reported a lower fat intake (34.1% v 35.8%, P = .04) with no difference in lipid profiles, (2) had improved fitness as shown by increased calculated maximal oxygen uptake ([Vo2max] 2.39 v 2.18 L.min-1, P = .007) with no change in insulin sensitivity, (3) showed no change in FPG, glucose tolerance, or hemoglobin A1c (HbA1c), and (4) showed a greater tendency to withdraw from the study (16% v 7%, P = .03). In conclusion, reinforced healthy-living advice given to self-referred subjects with increased FPG did not encourage sufficiently pronounced life-style changes for significantly greater effects on body weight and glycemia in a 1-year study than basic healthy-living advice.

Adult↗

Static and cyclic loading of fiber-reinforced dental resin.

OBJECTIVE: The aim of this study was to evaluate the flexure strength of unidirectional fiber-reinforced resins under static and cyclic loading with and without thermal cycling. METHODS: The fiber-reinforced resin materials chosen for this project were commercially available endodontic posts and commercially procured bar samples. For all materials, controls for flexure strength were tested in air and in water using three-point loading. Specimens were thermal cycled between 7 and 63 degrees C for 6000 cycles. A staircase approach was used to determine the flexure fatigue limit and scanning microscopy was used to examine the microstructure. RESULTS: The carbon/graphite fiber-reinforced resin posts and the glass FiberKor posts were significantly stronger than the ceramic (zirconia) and the other glass-reinforced resin materials. Thermal cycling caused a significant lowering (11-24%) of the flexure strength for each resin based post system. The ceramic post system decreased only by 2%. Further, for standard size glass fiber-reinforced resin bars, no significant differences between testing in air and water was observed, but a significant difference between static and cyclic loading was noted. SIGNIFICANCE: The decreases in the strength property due to thermal cycling and the cyclic loading of these materials indicates that their utilization in the oral environment enhances their degradation, and potentially shortens their clinical life.

Air↗

Reinforced regimen of interferon alfa-2a reduces the incidence of cirrhosis in patients with chronic hepatitis C: a multicentre randomised trial. Multicentre GER-CYT-04 Group.

BACKGROUND/AIMS: Our aim was to assess and compare the long-term effect of interferon at standard (6 months) and reinforced dose and duration regimens in chronic hepatitis C. METHODS: A multicentre institutional trial included 244 previously untreated patients with chronic hepatitis C, without cirrhosis, who were randomly allocated to either standard (3 MU thrice a week for 24 weeks; n=120) or reinforced (6 MU daily for 12 days, 6 MU thrice a week for 22 weeks, 3 MU thrice a week for 24 weeks; n=124) regimens. The main endpoint was sustained ALT response at 72 weeks (18 months); secondary end-points were virological (branched DNA and PCR) and histological responses (incidence of cirrhosis) at month 18. RESULTS: Sustained ALT response was observed in five patients (4%, 95% confidence interval 0-8%) in the standard group and in 21 patients (18%, 95% confidence interval 11-25%), from the reinforced group (p=0.002), in agreement with virological response in 21 (81%) patients. Cirrhosis at month 18 was observed in ten (10%) patients in the standard group and one (1%) in the reinforced group (p=0.004). CONCLUSIONS: The standard regimen of interferon, in chronic hepatitis C, confers a minimal sustained response rate at 18 months and may not prevent the occurrence of cirrhosis. Reinforced regimens allow sustained response to be reached in a limited number of patients and reduce the risk of cirrhosis during 18 months of follow-up.

Adult↗

Reinforcement learning with internal expectation in the random neural networks for cascaded decisions.

The reinforcement learning scheme proposed in Halici (J. Biosystems 40 (1997) 83) for the random neural network (RNN) (Neural Computation 1 (1989) 502) is based on reward and performs well for stationary environments. However, when the environment is not stationary it suffers from getting stuck to the previously learned action and extinction is not possible. To overcome the problem, the reinforcement scheme is extended in Halici (Eur. J. Oper. Res., 126(2000) 288) by introducing a new weight update rule (E-rule) which takes into consideration the internal expectation of reinforcement. Although the E-rule is proposed for the RNN, it can be used for training learning automata or other intelligent systems based on reinforcement learning. This paper looks into the behavior of the learning scheme with internal expectation for the environments where the reinforcement is obtained after a sequence of cascaded decisions. The simulation results have shown that the RNN learns well and extinction is possible even for the cases with several decision steps and with hundreds of possible decision paths.

Computer Simulation↗

Optimization of scanning transmission X-ray microscopy for the identification and quantitation of reinforcing particles in polyurethanes.

The morphology, size distributions, spatial distributions, and quantitative chemical compositions of co-polymer polyol-reinforcing particles in a polyurethane have been investigated with scanning transmission X-ray microscopy (STXM). A detailed discussion of microscope operating procedures is presented and ways to avoid potential artifacts are discussed. Images at selected photon energies in the C 1s, N 1s and O 1s regions allow unambiguous identification of styrene-acrylonitrile-based (SAN) copolymer and polyisocyanate polyaddition product-based (PIPA) reinforcing particles down to particle sizes at the limit of the spatial resolution (50 nm). Quantitative analysis of the chemical composition of individual reinforcing particles is achieved by fitting C 1s spectra to linear combinations of reference spectra. Regression analyses of sequences of images recorded through the chemically sensitive ranges of the C 1s, N 1s and O 1s spectra are used to generate quantitative compositional maps, which provide a fast and effective means of investigating compositional distributions over a large number of reinforcing particles. The size distribution of all particles determined by STXM is shown to be similar to that determined by TEM. The size distributions of each type of reinforcing particle, which differ considerably, were obtained by analysis of STXM images at chemically selective energies.

Microscopy, Electron, Scanning↗

Reinforcement of variations and repetitions along three independent response dimensions.

Reinforcement was presented contingent upon human subjects simultaneously varying three dimensions of an operant response. The response was drawing rectangles on a computer screen. The dimensions were area of the rectangle, its location on the screen, and its shape. In Experiment 1, an experimental group was reinforced for satisfying the three-part variability contingency. A control group was equally reinforced for drawing rectangles but independently of levels of variability. Results showed that the experimental group varied significantly more along each of the dimensions than did the control group. In Experiment 2, another group of subjects was reinforced for repeating instances along one of the dimensions, e.g. repeatedly draw a rectangle in approximately the same location, while simultaneously varying along the other two dimensions. The subjects learned to satisfy these contingencies as well. These results show reinforcement simultaneously and independently controls the variability of three orthogonal dimensions of a response.

Journal Article↗

Reinforcement of osteosynthesis screws with brushite cement.

The fixation of osteosynthesis screws remains a severe problem for fracture repair among osteoporotic patients. Polymethyl-methacrylate (PMMA) is routinely used to improve screw fixation, but this material has well-known drawbacks such as monomer toxicity, exothermic polymerization, and nonresorbability. Calcium phosphate cements have been developed for several years. Among these new bone substitution materials, brushite cements have the advantage of being injectable and resorbable. The aim of this study is to assess the reinforcement of osteosynthesis screws with brushite cement. Polyurethane foams, whose density is close to that of cancellous bone, were used as bone model. A hole was tapped in a foam sample, then brushite cement was injected. Trabecular osteosynthesis screws were inserted. After 24 h of aging in water, the stripping force was measured by a pull-out test. Screws (4.0 and 6.5 mm diameter) and two foam densities (0.14 and 0.28 g/cm3) were compared. Cements with varying solid/liquid ratios and xanthan contents were used in order to obtain the best screw reinforcement. During the pull-out test, the stripping force first increases to a maximum, then drops to a steady-state value until complete screw extraction. Both maximum force and plateau value increase drastically in the presence of cement. The highest stripping force is observed for 6.5-mm screws reinforced with cement in low-density foams. In this case, the stripping force is multiplied by 3.3 in the presence of cement. In a second experiment, cements with solid/liquid ratio ranging from 2.0 to 3.5 g/mL were used with 6.5-mm diameter screws. In some compositions, xanthan was added to improve injectability. The best results were obtained with 2.5 g/mL cement containing xanthan and with 3.0 g/mL cements without xanthan. A 0.9-kN maximal stripping force was observed with nonreinforced screws, while 1.9 kN was reached with reinforced screws. These first results are very promising regarding screw reinforcement with brushite cement. However, the polyurethane foam model presents noninterconnected porosity and physiological liquid was not modelized.

Bone Cements↗