Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polymerization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources
PubMed2006

In situ and frontal polymerization for the consolidation of porous stones: a unilateral NMR and magnetic resonance imaging study.

Consolidation treatment of porous materials was performed by in situ and frontal polymerization of acrylic monomers inside a porous stone. To study the penetration of the polymer inside the stone and its consolidating effects we used water as a contrast agent, detecting its penetration using unilateral NMR and magnetic resonance imaging. All data obtained on differently treated stones were compared with corresponding ones obtained analyzing both untreated stones and stones simply painted with a well-known polymeric protective agent. In situ polymerization of acrylic monomers inside porous stones has been demonstrated to be an extremely powerful consolidating method, whereas thermally initiated frontal polymerization seems less efficient. In both cases the optimal choice of monomers is still open and requires further study. Our data indicate that unilateral NMR represents an inexpensive and simple technique for the non-invasive observation of the water uptake and of the effect of consolidation procedures in porous materials.

Acrylates↗
PubMed1996

Mechanisms of isoniazid release from poly(d,l-lactide-co-glycolide) matrices prepared by dry-mixing and low density polymeric foam methods.

The release mechanisms of a small molecular drug from biodegradable poly(d,l-lactide-co-glycolide) (PLGA) cylindrical matrices were investigated. Isoniazid (INH), one of the most effective drugs against tuberculosis (TB), was selected as the model drug. Controlled-release matrices consisting of the drug and polymer were fabricated by two methods. The first of these, the dry-mixing method, involved the extrusion of a mixture of micronized drug and polymer particles as rods. In the second technique, the low density polymeric foam method, drug particles were enclosed in the cells of porous polymeric foams prior to extrusion. In vitro, the dry-mixed matrices released INH more rapidly than the polymeric foam matrices. The Roseman-Higuchi diffusion model, which had previously been found to be effective in analyzing the release kinetics of INH from the dry-mixed matrices, also fit the kinetics of INH released from matrices prepared from polymeric foams. This indicated that the release was still diffusion-controlled rather than degradation-controlled. The release mechanisms were further investigated, and two diffusion mechanisms, pore diffusion and lattice diffusion, were proposed for the INH controlled-release matrices according to the way in which they were prepared. Matrices prepared by the dry-mixing method appear to segregate drug particles along polymer grain boundaries and thus have a pore diffusion mechanism, while matrices prepared by the foam method entrap drug within the porous structure of foams and thus display a lattice diffusion mechanism. Theoretically, these two diffusion mechanisms can be identified by their activation energies for diffusion. With varying in vitro temperature, the activation energies were calculated from plots of ln (DIT) vs T-1 and in D vs T-1, where D is the diffusivity and T is the in vitro temperature in K. According to the results, we concluded that the INH from the dry-mixed matrices diffused through the drug channels filled with the medium, while the INH from the foam matrices diffused through the polymer lattice.

Antitubercular Agents↗
PubMed2004

Retention of structure in microemulsion polymerization: formation of nanolatices.

Polymerization of styrene-in-water microemulsions by photoinitiation using the initiator 2,2'-dimethoxy-2-phenyl acetophenone (DMPA) produces small nanolatices of the same size as the parent microemulsion (radius = 24-31 angstroms). This behavior is distinct from previously applied methods where significant particle growth accompanies the polymerization reaction. NMR measurements confirmed that polymerization is complete in under an hour and small-angle neutron scattering established the microemulsion structure before and after polymerization. The approach may be of more general application where retention of structure is sought in microemulsion-based polymer templating procedures.

Journal Article↗
PubMed2004

First emulsion polymerization of styrene with sodium borohydride: evidence of the generation of radical intermediates by sodium borohydride in H2O.

Emulsion polymerization of styrene with sodium borohydride (NaBH4) in an aqueous sodium dodecyl sulfate (SDS) solution was successfully accomplished for the first time. Polystyrene with a high molecular weight (M(w) > 2 000 000) and a broad molecular weight distribution (MWD approximately 3.5) was obtained in a conversion of less than 30%. Several pieces of evidence that the polymerization proceeded through radical intermediates were observed. Variations in the concentration of NaBH4 showed a critical range in said concentration, i.e., a borderline that determined whether the main reaction was directed to either a polymerization or a competed reaction with variations in the NaBH4 level. Kinetic studies on the emulsion polymerization of styrene with NaBH4 performed at 50, 55, and 60 degrees C showed that the initiator had an approximately 50-min induction period. A plot of -ln(1 - X), where X is the fractional conversion, as a function of time resulted in a linear relationship, showing that the present initiator system followed first-order kinetics with respect to monomer concentration. The Arrhenius plot between ln k vs 1/T gave a good linear relation, and the overall activation energy was observed to be about 37.5 kcal/mol. The employment of CH3I with NaBH4 significantly increased conversion (>95%) and provided polystyrene with a well-controlled Mw and MWD (<2.3).

Journal Article↗
PubMed2005

Emulsion polymerization of styrene and methyl methacrylate using a hydrophobically modified inulin and comparison with other surfactants.

The use of a new class of graft polymer surfactants, based on inulin, in emulsion polymerization of poly(methyl methacrylate) (PMMA) and polystyrene (PS) particles is described. PS and PMMA were synthesized by emulsion polymerization, and stable particles with a high monomer content (50 wt %) were obtained with a very small amount of polymeric surfactant ([surfactant]/[monomer] = 0.0033). The latex dispersions were characterized by dynamic light scattering and by transmission electron microscopy to obtain the average particle size and the polydispersity index, and the stability was determined by turbidimetry measurements and expressed in terms of critical coagulation concentration. The last section gives a comparison of PMMA particles prepared by emulsion polymerization using classical surfactants from different types as emulsifiers with that obtained using the copolymer surfactant. It shows the superiority of INUTEC SP1 as it is the only one that allows stable particles at 20 wt % monomer content, with a smaller ratio [surfactant]/[monomer] = 0.002.

Journal Article↗
PubMed2005

Odd-even effect of the methylene chain number in the template polymerization of alpha,beta-diacetylenecarboxylates incorporated in layered double hydroxide clay.

The present investigation reports on the significant differences observed in the efficiency of the polymerization depending on the odd- or even-numbered methylene chains of diacetylenecarboxylates, CH3(CH2)(m-1)C[triple bond]C-C[triple bond]C(CH2)(n-1)CO2- (mono-[m,n]), incorporated in layered double hydroxide (LDH) clay. Upon gamma-ray irradiation of the diacetylenecarboxylates, or mono-[m,n], in LDH clay, polymer hybrids or poly-[m,n]/LDH, which exhibited coloring from light orange to violet, were obtained. The color of the poly-[m,n]/LDH hybrids was strongly dependent on the extent of the polymerization degrees. Moreover, the polymerization degrees were controlled by the number of methylene spacers n between the carboxyl and diacetylene groups. An odd-numbered n for the methylene chain of mono-[m,n] was found to be the determining factor in the efficient polymerization of these self-assembling aggregates within the interlayers of LDH clay.

Letter↗
PubMed2005

On the formation of narrowly polydispersed PMMA by surface initiated polymerization (SIP) from AIBN-coated/intercalated clay nanoparticle platelets.

Various free radical surface initiated polymerization (SIP) conditions were investigated on clay nanoparticles coated with monocationic 2,2'-azobisisobutyronitrile (AIBN) type free radical initiators. Interesting differences in the mechanism of polymer nanocomposite product formation and the role of nanoparticle surface bound AIBN initiators were observed on three types of poly(methyl methacrylate) (PMMA) polymerization conditions: bulk, suspension, and solution. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) measurements confirmed the attachment of the initiator on the clay particles without decomposition of the azo group. XRD and transmission electron microscopy (TEM) showed that a well-dispersed structure was accomplished only by bulk and solution SIP. The suspension SIP product consisted of a partially exfoliated structure as shown by XRD and clay particle aggregate formation as shown by TEM. In general, the molecular weights (MWs) of the surface bound polymers were found to be lower than those of the free polymer. Using the same clay loading and initiator concentrations, we observed that relatively higher MW polymers were obtained from suspension and bulk polymerizations in contrast to solution method. However, the most interesting observation is that the surface bound polymers (on all three conditions) showed much narrower polydispersity compared to that of a typical AIBN type free radical polymerization.

Journal Article↗
PubMed2005

Modified structural model for predicting particle size in the microemulsion and emulsion polymerization of styrene under microwave irradiation.

In this study, the microemulsion and emulsion polymerization of styrene at 70 degrees C in the presence of sodium dodecyl sulfate (SDS, surfactant) and potassium persulfate (KPS, initiator) was conducted under microwave radiation. Laser light scattering was used to characterize the resultant polystyrene latex particles formed at different polymerization stages. The influence of the initial emulsion composition, that is, the SDS, KPS, and styrene concentrations, on the final particle size led us to a simple modified structural model in which we considered the stabilization effects of both the surfactant and the ionic end groups generated from the initiator. This model extended the application of the previous Wu plot from microemulsion polymerization to emulsion polymerization. Using this model, we were not only able to control the particle size but were also able to predict the monomer concentration dependence of the number of the resultant latex particles and the effect of diluting the reaction mixture on the resultant particle size.

Journal Article↗
PubMed2006

Patterned polyfluorene surfaces by functionalization of nanoimprinted polymeric features.

A new procedure is described for surface grafting polymer brushes by step-growth polymerization from initiator-embedded polymeric thin films and micron- and nanometer-scale patterns. An imprint lithographic process, nanocontact molding, was used to prepare thin patterned cross-linked polyacrylate network films on silicon wafers that incorporated 4-bromostyrene in the networks. These networks present reactive 4-bromophenyl functionality at the surface that act as attachment sites for the subsequent Ni(0)- mediated step-growth condensation polymerization of 2,7-dibromo-9,9-dihexylfluorene The step-growth polymerization medium consisted of 2,7-dibromo-9,9-dihexylfluorene, Ni(0)-catalyst, and bipyridine in a toluene/dimethylformamide solvent mixture. The resulting growth of polydihexylfluorene brushes from the patterned surface was monitored by contact angle, optical spectrometry, surface profilometry and AFM. Brush growth was conducted from patterned features ranging from 100 microm to 100 nm in width and 50 nm in height. The optical and fluorescence behavior of the polyfluorene brushes was similar to that of thin polyfluorene films made by spin coating.

Journal Article↗
PubMed2006

Online monitoring of polymerization reactions in inverse emulsions.

Automatic continuous online monitoring of polymerization reactions (ACOMP) was adapted to the monitoring of acrylamide polymerization in inverse emulsions. This is the first application of ACOMP to heterogeneous phase polymerization. The conversion and reduced viscosity were monitored by continuously inverting and diluting the emulsion phase using a small reactor sample stream and a breaker surfactant solution, followed by UV absorption and viscometric detection. This inversion into a stable portion of the polymer/surfactant phase diagram is accomplished in tens of seconds, yielding dilute solutions containing acrylamide (Aam), polyacrylamide (PA), oil droplets, and small quantities of surfactant, initiator and other debris, and low molecular weight compounds. After establishing the means of making ACOMP measurements, a first application of the method is made to resolving some of the kinetic issues involved in emulsion polymerization, including the evolution of molecular mass, and the simultaneous action of an "intrinsic" initiator and an added chemical initiator.

Journal Article↗
PubMed2006

Synthesis of quantum dot-tagged submicrometer polystyrene particles by miniemulsion polymerization.

Submicrometer fluorescent polystyrene (PS) particles have been synthesized via miniemulsion polymerization using CdSe/ZnS core-shell quantum dots (QDs). The influence of QD concentration, QD coating (either trioctylphosphine oxide (TOPO)-coated or vinyl-functionalized), and surfactant concentration on the polymerization kinetics and the photoluminescence properties of the prepared particles has been analyzed. Polymerization kinetics were not altered by the presence of QDs, whatever their surface coating. Latexes exhibited particle sizes ranging from 100 to 350 nm, depending on surfactant concentration, and a narrow particle size distribution was obtained in all cases. The fluorescence signal of the particles increased with the number of incorporated TOPO-coated QDs. The slight red shift of the emission maximum was correlated with phase separation between PS and QDs, which occurred during the polymerization, locating the QDs in the vicinity of the particle/water interface. QD-tagged particles displayed higher fluorescence intensity with TOPO-coated QDs compared to those with the vinyl moiety. The obtained fluorescent particles open up new opportunities for a variety of applications in biotechnology.

Cadmium Compounds↗
PubMed2006

Polymerization of anionic wormlike micelles.

Polymerizable anionic wormlike micelles are obtained upon mixing the hydrotropic salt p-toluidine hydrochloride (PTHC) with the reactive anionic surfactant sodium 4-(8-methacryloyloxyoctyl)oxybenzene sulfonate (MOBS). Polymerization captures the cross-sectional radius of the micelles (approximately 2 nm), induces micellar growth, and leads to the formation of a stable single-phase dispersion of wormlike micellar polymers. The unpolymerized and polymerized micelles were characterized using static and dynamic laser light scattering, small-angle neutron scattering, 1H NMR, and stopped-flow light scattering. Stopped-flow light scattering was also used to measure the average lifetime of the unpolymerized wormlike micelles. A comparison of the average lifetime of unpolymerized wormlike micelles with the surfactant monomer propagation rate was used to elucidate the mechanism of polymerization. There is a significant correlation between the ratio of the average lifetime to the monomer propagation rate and the average aggregation number of the polymerized wormlike micelles.

Journal Article↗
PubMed2006

Incorporation of nonionic emulsifiers inside particles in emulsion polymerization: mechanism and methods of suppression.

Emulsion polymerizations of styrene were carried out using two kinds of polyoxyethylene lauryl ether nonionic emulsifiers having different hydrophilic-lipophilic balances (HLB): Emulgen 109P (HLB 13.6); and Emulgen 150 (HLB 18.3). In both cases, incorporation of emulsifier inside polystyrene (PS) particles was clearly observed, as previously reported for the emulsion polymerization of styrene and methacrylic acid using polyoxyethylene nonyl phenyl ether (Emulgen 911, HLB 13.7) nonionic emulsifier. The generality of the incorporation phenomenon of nonionic emulsifier inside polymer particles in emulsion polymerization was clarified. In the case of Emulgen 109P, which is more hydrophobic than Emulgen 150, about 30% of the total amount was incorporated inside the PS particles, higher than for Emulgen 150 (15%). The difference seemed to be ascribed to the difference in the affinities between the nonionic emulsifiers and styrene, which cause the incorporation of emulsifier. On the basis of this idea, suppression of the incorporation was achieved by decreasing the polymerization temperature and the monomer-feed rate. This strongly supports the proposed incorporation mechanism.

Journal Article↗
PubMed1999

Permeation of PEO-PBLA-FITC polymeric micelles in aortic endothelial cells.

PURPOSE: To determine aortic endothelial cells permeation ability and mechanisms of the aqueous block copolymeric micelles, poly(ethylene oxide)-poly (beta-benzyl L-aspartate) (PEO-PBLA) chemically conjugated with fluroescein isothiocyanate (FITC) by transport study and confocal laser scanning microscopy. METHODS: The block copolymers' PEO-PBLA-FITC was first synthesized and characterized by gel permeation chromatography (GPC) reflect index, UV, fluorescence detectors, and critical micelles concentrations (CMC), and atomic force microscopy (AFM). Permeation ability and mechanisms of polymeric micelles in aortic endothelial cells were evaluated by incubating with NaF, NaN3, wortmannin, cytochalasin B inhibitors, at 20 degrees C, and under reverse conditions. FITC and latex particles (40 nm) were also used for comparison of transport ability. The extent of localization of uptake polymeric micelles was established by confocal laser scanning microscopy. RESULTS: The size of the aqueous PEO-PBLA-FITC polymeric micelles was detected at around 56 nm with unimodal distribution by AFM. The CMC test revealed the fluorescence intensity increased to around 0.01-0.05 mg/ml. NaF, NaN3, wortmannin, cytochalasin B, 20 degrees C, and reverse experiments inhibited the absorption of polymeric micelles through aortic endothelial cells with apparent permeability coefficients (P) of 18.07 +/- 1.03 to 12.98 +/- 0.93, 11.31 +/- 0.77, 12.44 +/- 1.23, 6.40 +/- 0.23, 11.11 +/- 0.46, and 10.22 +/- 1.09 x 10(-7) cm/sec, respectively. Also, the permeation of FITC and latex on aortic endothelial cells was 70.02 +/- 4.71, and 2.05 +/- 0.41 x 10(-7) cm/sec, respectively. Confocal laser microscopy showed that fluorescent compounds were distributed in the intracellular cytoplasm and nucleus. CONCLUSIONS: PEO-PBLA-FITC copolymeric micelles in an aqueous system were transported by energy-dependent endocytosis with 18.07 x 10(-7) cm/sec penetrated range and were localized on intracellular and nucleus endothelial cells.

Animals↗
PubMed2001

Effect of hydrogen ion concentration and buffer composition on ligand binding characteristics and polymerization of cow's milk folate binding protein.

The ligand binding and aggregation behavior of cow's milk folate binding protein depends on hydrogen ion concentration and buffer composition. At pH 5.0, the protein polymerizes in Tris-HCl subsequent to ligand binding. No polymerization occurs in acetate, and binding is markedly weaker in acetate or citrate buffers as compared to Tris-HCl. Polymerization of ligand-bound protein was far more pronounced at pH 7.4 as compared to pH 5.0 regardless of buffer composition. Binding affinity increased with decreasing concentration of protein both at pH 7.4 and 5.0. At pH 5.0 this effect seemed to level off at a protein concentration of 10(-6) M which is 100-1000 fold higher than at pH 7.4. The data can be interpreted in terms of complex models for ligand binding systems polymerizing both in the absence or presence of ligand (pH 7.4) as well as only subsequent to ligand binding (pH 5.0).

Animals↗
PubMed2001

Binding of radiolabeled folate and 5-methyltetrahydrofolate to cow's milk folate binding protein at pH 7.4 and 5.0. Relationship to concentration and polymerization equilibrium of the purified protein.

Binding of folate (pteroylglutamate) and 5-methyltetrahydrofolate, the major endogenous form of folate, to folate binding protein purified from cow's milk was studied at 7 degrees C to avoid degradation of 5-methyltetrahydrofolate. Both folates dissociate rapidly from the protein at pH 3.5, but extremely slowly at pH 7.4, most likely due to drastic changes in protein conformation occurring after folate binding. Dissociation of 5-methyltetrahydrofolate showed no increase at 37 degrees C suggesting that protein-bound-5-methyltetrahydrofolate is protected against degradation. Binding displayed two characteristics, positive cooperativity and a binding affinity that increased with decreasing concentrations of the protein. The binding affinity of folate was somewhat greater than that of 5-methyl tetrahydrofolate, in particular at pH 5.0. Ligand-bound protein exhibited concentration-dependent polymerization (8-mers formed at 13 microM) at pH 7.4. At pH 5.0, only folate-bound forms showed noticeable polymerization. The fact that folate at pH 5.0 surpasses 5-methyltetrahydrofolate both with regard to binding affinity and ability to induce polymerization suggests that ligand binding is associated with conformational changes of the protein which favor polymerization.

Animals↗
PubMed2003

Effects of polyamines on histone polymerization.

It is generally accepted that the nucleosome structure is not static, and that alternative conformations are adopted in response to several stimuli associated with the different functions. Histones are substrates for transglutaminase (TGase), and polymerized histone and polyamine binding histone have been suggested to play important roles in nucleus. We examined whether histone polymerization catalyzed by TGase was influenced by polyamines such as putrescine (PUT), spermidine (SPD), and spermine (SPM). PUT inhibited histone polymerization, and SPD slightly prevented it. However, SPM slightly enhanced histone polymerization. These results indicate that the nuclear accumulation of the polyamines may play an important role in nuclear remodeling by histone modification. We speculate that histone cross-linking by TGase may be involved in the chromatin structure. Also, we propose that histone cross-linking by TGase may be responsible for the changes in DNA function such as transcription and replication and that TGase may be involved in cell growth and differentiation.

Animals↗
PubMed1982

Kinetics of sickle haemoglobin polymerization in single red cells.

Kinetic studies on solutions of purified haemoglobin S indicate that the rate of intracellular polymerization is an important variable in the pathophysiology of sickle cell disease. Until now, however, no experimental technique has been available to measure directly the kinetics of intracellular polymerization. Indirect methods, which use visual determination of cellular shape changes or changes in filterability of red cell suspensions, have given apparently conflicting results. Here we report our initial results on the application of a laser-photolysis, light scattering technique to measure directly the kinetics of haemoglobin S polymerization in single red cells. In our experiment, deoxyhaemoglobin S is rapidly formed by photolysing the carbon monoxide complex with an argon ion laser focused inside the cell, and the change in scattered light is used to detect the appearance of polymer. We find a very wide distribution of delay times, ranging from 1 ms to greater than 100 s, indicating that the polymerization inside red cells proceeds by the same nucleation and growth mechanism as in solutions of purified haemoglobin S.

Erythrocytes↗