Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Poly T”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources
PubMed2004

Poly(vinyl alcohol) and poly(vinyl pyrrolidone) blended films for local nitric oxide release.

The nitric oxide (NO) donor S-nitrosoglutathione (GSNO) was incorporated in solid polymeric films of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP) and blended PVA/PVP. These matrices were found to provide a great stabilization effect on the thermal decomposition of GSNO, leading to 8-16-fold reduction in the first-order rate constants of NO release, compared to aqueous GSNO solutions. PVA/PVP-GSNO released 90% of the NO supply, over a time period of 24h at 37 degrees C. Differential scanning calorimetry has confirmed the miscibility between the two polymeric components. Stress-strain analysis has shown an improvement of the mechanical property of PVA films in the PVA/PVP blend, which leads to an increase of 25% in the stress at break. Scanning electron microscopy has shown that the PVA/PVP-GSNO blend leads to a smooth coating of metallic surfaces. These properties, allied to the already known good biocompatibility of PVA and PVP, makes GSNO-containing PVA and PVA/PVP blend films good candidates for the local and controlled release of NO in target areas.

Coated Materials, Biocompatible↗
PubMed2004

Staphylococcus aureus adhesion to titanium oxide surfaces coated with non-functionalized and peptide-functionalized poly(L-lysine)-grafted-poly(ethylene glycol) copolymers.

Implanted biomaterials are coated immediately with host plasma constituents, including extracellular matrix (ECM); this reaction may be undesirable in some cases. Poly(L-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG) has been shown to spontaneously adsorb from aqueous solution onto metal oxide surfaces, effectively reducing the degree of non-specific adsorption of blood and ECM proteins, and decreasing the adhesion of fibroblastic and osteoblastic cells to the coated surfaces. Cell adhesion through specific peptide-integrin receptors could be restored on surfaces coated with PLL-g-PEG functionalized with peptides of the RGD (Arg-Asp-Gly) type. To date, no study has examined the effect of surface modifications by PLL-g-PEG-based polymers on bacterial adhesion. The ability of Staphylococcus aureus to adhere to the ECM and plasma proteins deposited on biomaterials is a significant factor in the pathogenesis of medical-device-related infections. This study describes methods for visualizing and quantifying the adhesion of S. aureus to smooth and rough (chemically etched) titanium surfaces without and with monomolecular coatings of PLL-g-PEG, PLL-g-PEG/PEG-RGD and PLL-g-PEG/PEG-RDG. The different surfaces were exposed to S. aureus cultures for 1-24h and bacteria surface density was evaluated using scanning electron microscopy and fluorescence microscopy. Coating titanium surfaces with any of the three types of copolymers significantly decreased the adhesion of S. aureus to the surfaces by 89-93% for PLL-g-PEG, and 69% for PLL-g-PEG/PEG-RGD. Therefore, surfaces coated with PLL-g-PEG/PEG-RGD have the ability to attach cells such as fibroblasts and osteoblasts while showing reduced S. aureus adhesion, resulting in a selective biointeraction pattern that may be useful for applications in the area of osteosynthesis, orthopaedic and dental implantology.

Bacterial Adhesion↗
PubMed2005

Glucose permeable poly (dimethyl siloxane) poly (N-isopropyl acrylamide) interpenetrating networks as ophthalmic biomaterials.

Poly (dimethyl siloxane) (PDMS) has been widely used as a biomaterial in ophthalmic and other applications due to its good compatibility, high mechanical strength, excellent oxygen permeability and transparency. However, for use as an artificial cornea, contact lens and in other applications, modifications with hydrophilic functional groups or polymers are necessary to improve wettability for tear protein and mucin interactions and to improve glucose permeability for cellular health. Poly (N-isopropyl acrylamide) (PNIPAAM) is a biocompatible and hydrophilic polymer that has been extensively studied on controlled drug release applications due to its lower critical solution temperature (LCST) phenomenon. In the current work, a composite interpenetrating network (IPN) of PDMS and PNIPAAM was formed to generate polymers with oxygen and glucose permeability as well as improved wettability compared to PDMS homopolymers and greater mechanical strength than PNIPAAM homopolymers. Transparent vinyl and hydroxyl terminated PDMS/PNIPAAM IPNs (PDMS-V and PDMS-OH IPNs, respectively) were successfully synthesized. Transmission electron microscopy images verified the structure of the IPNs. Surface analysis suggested that PNIPAAM was present on the surface as well as in the bulk material. PDMS-OH IPNs generated from a PDMS-OH matrix cured in the presence of solvent had the highest glucose permeability at 10(-7)cm2/s, comparable to that of the native cornea. The LCST phenomenon remained in these materials, although changes were not as abrupt as with pure PNIPAAM. These results suggest that these materials may be further developed as ophthalmic biomaterials or for controlled drug-release applications.

Acrylic Resins↗
PubMed2005

Tethering poly(ethylene glycol)s to improve the surface biocompatibility of poly(acrylonitrile-co-maleic acid) asymmetric membranes.

To improve the surface biocompatibility, asymmetric membranes fabricated from poly(acrylonitrile-co-maleic acid)s (PANCMAs) synthesized by water-phase precipitation copolymerization were tethered (or immobilized) with poly(ethylene glycol)s (PEGs) by esterification reaction. Chemical changes on the membrane surface were characterized by Fourier transform infrared spectroscopy and elemental analysis to confirm the immobilization of PEG onto the PANCMA membranes. The hydrophilicity and blood compatibility of the PEG-tethered PANCMA membrane were investigated by water contact angle, water absorption, protein adsorption, plasma platelets adhesion and cell adhesion measurements, and the results were compared with the corresponding PANCMA membranes. It was found that, after the tethering of PEG, the hydrophilicity of the membrane can be improved significantly, and the protein adsorption, platelets adhesion and macrophage attachment on the membrane surface are obviously suppressed. Furthermore, not only the content of maleic acid in PANCMA, which influences the tethering density of PEG, but also the molecular weight of PEG has great effect on the surface modification of PANCMA membranes for biocompatibility.

Acrylic Resins↗
PubMed2005

Chemical modification of poly(vinyl chloride) resin using poly(ethylene glycol) to improve blood compatibility.

Poly(vinyl chloride) (PVC) was aminated by treating the resin with a concentrated aqueous solution of ethylenediamine. The aminated PVC was then reacted with hexamethylene diisocyanate to incorporate the isocyanate group onto the polymer backbone. The isocyanated PVC was further reacted with poly(ethylene glycol) (PEG) of molecular weight 600 Da. The modified polymer was characterized using infrared and X-ray photoelectron spectroscopy (XPS) and thermal analysis. Infrared and XPS spectra showed the incorporation of PEG onto PVC. The thermal stability of the modified polymer was found to be lowered by the incorporation of PEG. Contact angle measurements on the surface of polymer films cast from a tetrahydrofuran solution of the polymer demonstrated that the modified polymer gave rise to a significantly hydrophilic surface compared to unmodified PVC. The solid/water interfacial free energy of the modified surface was 3.9 ergs/cm(2) as opposed to 18.4 ergs/cm(2) for bare PVC surface. Static platelet adhesion studies using platelet-rich plasma showed significantly reduced platelet adhesion on the surface of the modified polymer compared to control PVC. The surface hydrophilicity of the films was remarkably retained even in the presence of up to 30 wt% concentration of the plasticizer di-(2-ethylhexyl phthalate). The study showed that bulk modification of PVC with PEG using appropriate chemistry can give rise to a polymer that possesses the anti-fouling property of PEG and such bulk modifications are less cumbersome compared to surface modifications on the finished product to impart anti-fouling properties to the PVC surface.

Biocompatible Materials↗
PubMed2005

Modulation of the pH-responsive properties of poly(L-lysine iso-phthalamide) grafted with a poly(ethylene glycol) analogue.

A pH responsive pseudopeptide, poly(L-lysine iso-phthalamide), has been modified with a hydrophilic poly(ethylene glycol) analogue, Jeffamine M-1000 and the effect of grafting ratio on the pH responsive behaviour of the grafted polymers in aqueous solution investigated using fluorescence and 1H NMR spectroscopy. It was demonstrated that at below 35.1 wt% grafting, the modified polymers retained the pH-driven conformational transition of the parent polymer from an expanded structure at high degrees of ionisation to a compact hydrophobically stabilised structure at low degrees of ionisation. The onset of pH response and the pH range over which the conformational transition occurred varied significantly with degree of grafting. At Jeffamine M-1000 ratios in excess of 48.0 wt%, the graft polymer existed in a micellular form over the whole pH studied. Potential applications in drug delivery of both the linear and micellular forms are discussed.

Absorption↗
PubMed2005

Photo-iniferter-based thermoresponsive block copolymers composed of poly(ethylene glycol) and poly(N-isopropylacrylamide) and chondrocyte immobilization.

A series of thermoresponsive poly(N-isopropylacrylamide) (PNIPAM)-poly(ethylene glycol) (PEG) block copolymers with various PNIPAM contents and copolymer architectures, such as linear, four-armed and eight-armed configurations, were prepared by iniferter-based photopolymerization of dithiocarbamylated PEGs (DC-PEGs) under ultraviolet (UV)-light irradiation. The increase in monomer/DC-PEG feed ratio resulted in an increase in both the molecular weight and PNIPAM content of copolymers. The measurement of the optical transmittances of aqueous solutions of PNIPAM-PEG block copolymers determined the lower critical solution temperatures (LCSTs) of block copolymers, which ranged from 31.3 to 34.0 degrees C. LCST decreased with increasing block length of PNIPAM and with the formation of a branched architecture. Rabbit chondrocytes were immobilized and cultured in a three-dimensional (3D) gel composed of PNIPAM-PEG block copolymer at 37 degrees C. Gels prepared from copolymers with higher PNIPAM contents at higher concentrations appeared to exhibit a minimal decrease in both cell number and cell viability during a 7-day culture. Cell viability dependencies on material and formulation parameters and the potential use of PNIPAM-PEG block copolymers as an in situ formable scaffold for an engineered cartilage tissue were discussed.

Acrylic Resins↗
PubMed2005

Paclitaxel-loaded poly(gamma-glutamic acid)-poly(lactide) nanoparticles as a targeted drug delivery system for the treatment of liver cancer.

The study was to develop paclitaxel-loaded formulations using a novel type of self-assembled nanoparticles (P/NPs) composed of block copolymers synthesized by poly(gamma-glutamic acid) and poly(lactide). For the potential of targeting liver cancer cells, galactosamine was conjugated on the prepared nanoparticles (Gal-P/NPs). In the in vitro studies, it was found that both the P/NPs and the Gal-P/NPs had a similar release profile of paclitaxel. The activity in inhibiting the growth of HepG2 cells by the Gal-P/NPs was comparable to that of a clinically available paclitaxel formulation (Phyxol), while the P/NPs displayed a significantly less activity (p<0.05). The biodistribution and anti-tumor efficacy of the prepared nanoparticles were studied in hepatoma-tumor-bearing nude mice. It was found that the groups injected with Phyxol, the P/NPs or the Gal-P/NPs significantly delayed the tumor growth as compared to the control group injected with PBS (p<0.05). Among all studied groups, the group injected with the Gal-P/NPs appeared to have the most significant efficacy in the reduction of the size of the tumor. This is because a large number of the Gal-P/NPs were observed at the tumor site, and subsequently released their encapsulated paclitaxel to inhibit the growth of the tumor. The aforementioned results indicated that the Gal-P/NPs prepared in the study had a specific interaction with the hepatoma tumor induced in nude mice via ligand-receptor recognition. Therefore, the prepared Gal-P/NPs may be used as a potential drug delivery system for the targeted delivery to liver cancers.

Animals↗
PubMed2006

Enzymatic degradation of poly(ether urethane) and poly(carbonate urethane) by cholesterol esterase.

This study examined the effect of cholesterol esterase (CE) on the degradation of commercial poly(ether urethane) (PEU) and poly(carbonate urethane) (PCU). Unstrained PEU and PCU films were incubated in 400 U/mL CE solution or a buffer control for 36 days. The study used a concentration of cholesterol esterase that was considerably higher than the estimated physiological level in order to accelerate degradation. However, characterization of treated polyurethane films with SEM, attenuated total reflectance Fourier transform infrared (ATR-FTIR) and GPC analysis revealed only a small loss in surface soft segment content. Comparison with implanted PEU and PCU films led to the conclusion that any effect of enzymatic hydrolysis was confined to the immediate surface, and the magnitude of the effect was too small to contribute significantly to in vivo degradation. The study confirmed that oxidation, rather than enzymatic hydrolysis, is the primary mechanism responsible for the observed biodegradation of PEU and PCU. The oxidative H(2)O(2)/CoCl(2) treatment continues to accurately predict the long-term biostability of polyurethanes.

Animals↗
PubMed2005

Comparison of biodegradation of poly(ethylene glycol)s and poly(propylene glycol)s.

The biodegradation of poly(ethylene glycol)s (PEGs) and poly(propylene glycol)s (PPGs), both being major by-products of non-ionic surfactants biodegradation, was studied under the conditions of the River Water Die-Away Test. PEGs were isolated from a water matrix using solid-phase extraction with graphitized carbon black sorbent, then derivatized with phenyl isocyanate and determined by HPLC with UV detection. PPGs were isolated from a water matrix by liquid-liquid extraction with chloroform, then derivatized with naphthyl isocyanate and determined by HPLC with fluorescence detection. The primary biodegradation of both PEGs and PPGs reached approximately 99% during the test. The tests show different biodegradation pathways of PEG and PPG. During PEG biodegradation, their chains are shortened leading to the formation of ethylene glycol and diethylene glycol. During PPG biodegradation, no short-chained biodegradation products were found.

Biodegradation, Environmental↗
PubMed2004

Development of a solid-phase extraction method for simultaneous extraction of adipic acid, succinic acid and 1,4-butanediol formed during hydrolysis of poly(butylene adipate) and poly(butylene succinate).

A solid-phase extraction (SPE) method was developed for the simultaneous extraction of dicarboxylic acids and diols formed during hydrolysis of poly(butylene succinate), PBS, and poly(butylene adipate), PBA. Four commercial non-polar SPE columns, three silica based: C8, C18, C18 (EC), and one resin based: ENV+, were tested for the extraction of succinic acid, adipic acid and 1,4-butanediol, the expected final hydrolysis products of PBS and PBA. ENV+ resin was chosen as a solid-phase, because it displayed the best extraction efficiency for 1,4-butanediol and succinic acid. Linear range for the extracted analytes was 1-500 ng/microl for adipic acid and 2-500 ng/microl for 1,4-butanediol and succinic acid. Detection and quantification limits for the analytes were between 1-2 and 2-7 ng/microl, respectively, and relative standard deviations were between 3 and 7%. Good repeatability and low detection limits made the developed SPE method and subsequent gas chromatography-mass spectrometry (GC-MS) analysis a sensitive tool for identification and quantification of hydrolysis products at early stages of degradation.

Adipates↗
PubMed2004

Small-angle neutron scattering study on microstructure of poly(N-isopropylacrylamide)-block-poly(ethylene glycol) in water.

By employing small-angle neutron scattering (SANS), we investigated the microstructures of, poly(N-isopropylacrylamide) (PNIPA)-block-poly(ethylene glycol) (PEG) (NE) in deuterated water D2O, as related to macroscopic behaviors of fluidity, turbidity and synerisis. SANS revealed following results: (i) microphase separation occurs at around above 17 degrees C in a temperature range of transparent sol below 30 degrees C. In the microdomain appeared in the transparent sol state, both block chains of PNIPA and PEG are swollen by water; (ii) for the NE solution of polymer concentration W(p)>3.5% (w/v), corresponding to opaque gel above 30 degrees C, a percolated structure, i.e., network-like domain is formed by NE as a result of macrophase separation due to dehydration of the PNIPA chains. As the temperature increases toward 40 degrees C, the network domain is squeezed along a direction parallel to the NE interface, which leads to increase of the interfacial thickness given by swollen PEG chains and to the macroscopic synerisis behavior.

Acrylic Resins↗
PubMed2004

Synthesis and micellar characterization of short block length methoxy poly(ethylene glycol)-block-poly(caprolactone) diblock copolymers.

A series of short block length methoxy poly(ethylene glycol)-block-poly(caprolactone) diblock copolymers was synthesized and characterized in order to assess the potential of these copolymers as a micellar drug-delivery system. Varying the caprolactone:MePEG weight ratio in the reaction mixture allowed the synthesis of diblock copolymers with a MePEG molecular weight of 750 g/mol and PCL block lengths of 2, 5 or 10 repeat units. Phase diagrams of aqueous solutions of the copolymers were constructed which displayed characteristic cloud points and Krafft points. As the degree of polymerization of PCL increased, critical micelle concentration (CMC) values decreased from 6.97 x 10(-1) to 3.38 x 10(-3) g/l, partition equilibrium coefficients (Kv) increased from 1.09 x 10(4) to 22.2 x 10(4),and hydrodynamic diameters increased from 12.2 to 19.5 nm. The micelle morphology was determined to be spherical by transmission electron microscopy.

Fluorescence↗
PubMed2005

pH responsive adhesion of phospholipid vesicle on poly(acrylic acid) cushion grafted to poly(ethylene terephthalate) surface.

Polymer-supported lipid bilayer is a key enabling technology for the design and fabrication of novel biomimetic devices. To date, the physical driving force underlying the formation of polymer-supported lipid bilayer remains to be determined. In this study, the interaction between dipalmitoylphosphocholine (DPPC) vesicle and poly(ethylene terephthalate) [PET] surface with or without grafted poly(acrylic acid) [PAA] layer is examined with several biophysical techniques. First, vesicle deformation analysis shows that the geometry of adherent vesicle on either plain PET or PAA-grafted PET surface is best described by a truncated sphere model. At neutral pH, the degree of deformation and adhesion energy are unaltered by the grafted polymerization of acrylic acid on PET surface. Interestingly, the average magnitude of adhesion energy is increased by 185% and -43% on PAA-grated PET and plain PET surface, respectively, towards an increase of pH at room temperature. Our results demonstrate the possibility of tuning the adhesive interaction between vesicle and polymer cushion through the control of polyelectrolyte ionization on the solid support.

Acrylic Resins↗
PubMed2006

Effect of core-shell micelle formation on the redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide).

Redox properties of phenothiazine-labeled poly(ethyl glycidy ether)-block-poly(ethylene oxide) (PT-EGE(n)-b-EO(m)) are reversibly changed by core-shell micelle formation. In the temperature range higher than the critical micellization temperature (cmt), the anodic potential of PT group positively shifts and concomitantly its anodic current decrease, or levels off compared to those of the reference polymer PT-EO(m) without the thermo-responsive EGE(n) segment. The former alteration is caused by incorporation of hydrophobic PT groups into a core of the micelle and the latter by the decrease in the diffusion coefficient of PT groups due to formation of the core-shell micelles. The cmt value and the temperature-dependent alteration in the redox properties strongly depend on the polymer structure, especially the length of thermo-responsive EGE(n) segment. The electrochemically determined hydrodynamic radii of the polymer aggregates seem to be overestimated, compared to the values reported for the aggregates of other thermo-responsive polymers with similar molecular weights, implying the presence of electrochemically inactive PT groups in the copolymers having longer thermo-responsive segments.

Diffusion↗
PubMed2006

pH-responsive polymeric micelles of poly(ethylene glycol)-b-poly(alkyl(meth)acrylate-co-methacrylic acid): influence of the copolymer composition on self-assembling properties and release of candesartan cilexetil.

The objective of the present study was to investigate the influence of chemical structure and molecular weight of pH-sensitive block copolymers on their self-assembling properties, the loading and the release of candesartan cilexetil (CDN). Block copolymers of poly(ethylene glycol) and t-butyl methacrylate, iso-butyl acrylate, n-butyl acrylate or propyl methacrylate were synthesized by atom transfer radical polymerization. pH-sensitivity was obtained by hydrolysis of t-butyl groups. The poorly water-soluble drug CDN was incorporated in the micelles and the in vitro drug release was evaluated as a function of pH. The critical aggregation concentration of hydrolyzed copolymers (pK(a)=6.2-6.6) was higher compared to the unhydrolyzed ones. Dynamic light scattering studies and atomic force microscopy images revealed uniform size micelles with aggregation numbers ranging from 60 to 160. The entrapment efficiency of CDN was generally found to be above 90%, with drug loading levels reaching approximately 20% (w/w). Differential scanning calorimetry studies showed the amorphous nature of entrapped CDN. The release of CDN from pH-sensitive micelles was triggered upon an increase in pH from 1.2 to 7.2. These findings suggest that the PEG-b-poly(alkyl(meth)acrylate-co-methacrylic acid)s can self-assemble to form micelles which exhibit high loading capacities for CDN and release the drug in a pH-dependent fashion.

Angiotensin II Type 1 Receptor Blockers↗
PubMed2005

Drug release from and hydrolytic degradation of a poly(ethylene glycol) grafted poly(3-hydroxyoctanoate).

Monoacrylate-poly(ethylene glycol)-grafted poly(3-hydroxyoctanoate) (PEGMA-g-PHO) copolymers were synthesized to develop a swelling-controlled release delivery system for ibuprofen as a model drug. The in vitro hydrolytic degradation of and the drug release from a film made of the PEGMA-g-PHO copolymer were carried out in a phosphate buffer saline (pH 7.4) medium. The hydrolytic degradation of the copolymer was strongly dependent on the degree of grafting (DG) of the PEGMA group. The degradation rate of the copolymer films in vitro increased with increasing DG of the PEGMA group on the PHO chain. The copolymer films showed a controlled delivery of ibuprofen to the medium in periods of time that depend on the composition, hydrophilic/hydrophobic characteristics, initial drug loading amount and film thickness of the graft copolymer support. The drug release rate from the grafted copolymer films was faster than the rate of weight loss of the films themselves. In particular, a combination of the low DG of the PEGMA group in the PHO chains with the low ibuprofen solubility in water led to long-term constant release from these matrices in vitro.

Absorption↗
PubMed2006

Preparation and hydrolytic degradation of semi-interpenetrating networks of poly(3-hydroxyundecenoate) and poly(lactide-co-glycolide).

Semi-interpenetrating networks (semi-IPNs), where poly(lactide-co-glycolide) (PLGA) molecules were entrapped in the crosslinked matrices of poly(3-hydroxyundecenoate) (PHU), were prepared by irradiating homogeneous solutions of PHU and PLGA in chloroform with UV light. Attenuated total reflectance infrared spectroscopy showed that the PLGA chains were entrapped in PHU networks. The semi-IPNs showed enhanced mechanical strength as the PLGA content increased. The semi-IPNs were incubated at 37 degrees C in a 0.01N NaOH solution, and the extent of hydrolytic degradation was investigated by monitoring changes in various parameters such as water uptake, pH, mass, and morphology. Hydrolysis of semi-IPNs were significantly affected by the presence of PLGA. A semi-IPN prepared from a 9:1 (by weight) mixture of PHU and PLGA lost 25% of its original weight in 12 weeks while a PHU sample containing no PLGA lost only 5% of its weight during the same period under identical conditions. The hydrolysis was most likely accelerated when the pH of the medium was lowered by the hydrolyzed products of PLGA, 2-hydroxyalkanoic acids. These results showed that hydrolysis of PHA could be enhanced by incorporating a second component that lowered the pH of the hydrolysis system.

Hydrogen-Ion Concentration↗