Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DIMETHYLFORMAMIDE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources

Anticoagulant activity of a sulfated chitosan.

Chitin prepared from the shells of rice-field crabs (Somanniathelphusa dugasti) was converted into chitosan with a degree of acetylation of 0.21 and then sulfated with chlorosulfonic acid in N,N-dimethylformamide under semi-heterogeneous conditions to give 87% of water-soluble sulfated chitosan with degree of substitution (d.s) of 2.13. 1H NMR revealed the sulfate substitution at C-2, C-3 and C-6. Gel filtration on Sepharose CL-6B of the sulfated chitosan gave three fractions with average molecular weights of 7.1, 3.5, and 1.9 x 10(4). The three sulfated chitosan preparations showed strong anticoagulant activities, with the same mechanism of action observed for standard therapeutic heparin.

Acetylation↗

Synthesis of anellated carbasugars from (--)-quinic acid.

(3R,4R,5R)-3-[(tert-Butyl-dimethylsilyl)oxy]-4,5-(isopropylidenedioxy)-1-cyclohexanone (2) reacted with carbon disulfide and methyl iodide in the presence of sodium hydride to furnish (3R,4R,5R)-5-[(tert-butyl-dimethylsilyl)oxy]-3,4-(isopropylidenedioxy)-2-[bis(methylthio)methylene]-1-cyclohexanone (3). 2 and N,N-dimethylformamide dimethyl acetal afforded (2E,3R,4R,5R)-5-[(tert-butyl-dimethylsilyl)oxy]-2-(dimethylaminomethylene)-3,4-(isopropylidenedioxy)-1-cyclohexanone (4). These push-pull activated methylenecyclohexanones 3 and 4 underwent a ring closure reaction with hydrazine hydrate and methylhydrazine, respectively, to give pyrazoloanellated carbasugars. Treatment of 3 with formamidinium, acetamidinium and benzamidinium salts, respectively, in the presence of sodium methanolate yielded three (5R,6R,7R)-7-[(tert-butyl-dimethylsilyl)oxy]-5,6,7,8-tetrahydro-5,6-(isopropylidenedioxy)benzo[d]pyrimidines.

Carbohydrates↗

New derivatives of D-mannaric and galactaric acids. Synthesis of a new stereoregular Nylon 66 analog from carbohydrate-based monomers having the D-manno configuration.

2,3,4,5-Tetra-O-methyl-D-mannaric and galactaric acids and their bis(pentachlorophenyl) esters have been prepared as crystalline compounds, in good yields, from D-mannitol and galactitol, respectively. A new stereoregular polyamide, analogous to Nylon 66, has been prepared by polycondensation of bis(pentachlorophenyl) 2,3,4,5-tetra-O-methyl-D-mannarate with 1,6-diamino-1,6-dideoxy-2,3,4,5-tetra-O-methyl-D-mannitol dihydrochloride. The polymer has a M(w) of 31,100 with a polydispersity of 1.5 (GPC). It was highly hygroscopic and soluble in ethanol, acetone, dimethyl sulfoxide, N,N-dimethylformamide and chloroform, but only slightly soluble in water.

Carbohydrate Conformation↗

Subtilisin-catalyzed esterification of di- and oligosaccharides containing a D-fructose moiety.

Several di- and oligosaccharides containing a D-fructose moiety have been acylated by protease subtilisin in anhydrous dimethylformamide in the presence of the activated ester trifluoroethyl butanoate. Under the reaction conditions used, all the substrates were converted into the corresponding monobutanoates in ca. 50% isolated yields. Structural determination of the products by 13C NMR indicated a strong preference of subtilisin towards the regioselective esterification of the primary hydroxyls of the fructose moiety and, specifically, of the C-1 OH, as already observed with sucrose.

Acylation↗

Relative hepatotoxicity of some industrial solvents after intraperitoneal injection or inhalation exposure in rats.

Intraperitoneal LD50 (lethal dose 50% kill) values and minimal liver toxic doses in female Sprague-Dawley rats were determined for the following industrial solvents: toluene, methylene chloride, carbon tetrachloride, 1,1,1-trichloroethane, 1,1,2-trichloroethane, trichloroethylene, ethanol, methyl ethyl ketone, and dioxane. For the following solvents LC50 values and minimal liver toxic air concentrations were also determined: xylene, styrene, chloroform, tetrachloroethylene, and dimethylformamide (DMF). The serum activity of the enzyme sorbitol dehydrogenase (SDH) was used as an indicator of liver damage. Carbon tetrachloride, chloroform, and DMF were hepatotoxic in low doses compared to LD50 values (TD50 (toxic dose 50%) values approximately 30, 90, and 50 mg/kg). Chloroform and DMF were hepatotoxic in comparatively low concentrations after a 4-hr inhalation exposure (TC50 (toxic concentration 50%) values approximately 590 and 740 mg/m3). Even relatively high doses of the other solvents did not raise the SDH activity. Significant direct (metabolite-mediated) hepatotoxicity seems to be an uncommon feature among commonly used industrial solvents.

Animals↗

[11C]RN5: a new agent for the in vivo imaging of myocardial alpha1-adrenoceptors.

The radiolabelling with the positron-emitter Carbon-11 and the biological evaluation in rats of 3-[2-[4-(2-[11C]methoxyphenyl)piperazin-1-yl]ethyl]pyrimido[5,4-b]indole-2,4-dione ([11C]RN5), alpha1-adrenoceptor antagonist (K(i)=0.21 nM), as a putative radioligand for the non-invasive assessment of alpha1-adrenoceptors with positron emission tomography (PET) is reported. The radiosynthesis procedure consisted of O-methylation of des-methyl precursor with [11C]methyl iodide in the presence of potassium hydroxide in dimethylformamide (DMF) at 80 degrees C. [11C]RN5 was obtained in >99% radiochemical purity in 25 min with a radiochemical yield in the 20-30% range, end of synthesis (EOS) (non-decay corrected) and a specific radioactivity of 92.5+/-18.5 GBq/micromol. Pre-clinical studies in rats showed a high uptake of [11C]RN5 in heart, spleen, adrenal gland, lung and kidney but not in the brain. Inhibition studies with high doses of different adrenergic antagonists indicate that more than 70% of myocardial uptake of [11C]RN5 is due to specific binding to alpha1-adrenoceptors. Our results indicate that [11C]RN5 is suitable to be further developed as a potential radioligand for the in vivo PET imaging of myocardial alpha1-adrenoceptors in humans.

Adrenergic alpha-Antagonists↗

Spectrophotometric method for the determination of amlodipine besylate with ninhydrin in drug formulations.

A spectrophotometric method has been developed for the determination of amlodipine besylate in pure form and in pharmaceutical preparations. The method is based on the reaction of the primary amino group of the drug with ninhydrin in N,N'-dimethylformamide (DMF) medium producing a coloured complex which absorbs maximally at 595 nm. Beer's law is obeyed in the concentration range of 10-60 microg ml(-1) with RSD of 0.66% and molar absorptivity of 6.52 x 10(3) l mol(-1) cm(-1). All variables were studied in order to optimize the reaction conditions. The proposed method has been applied successfully to the analysis of the bulk drug and its dosage forms. No interference was observed from common pharmaceutical adjuvants. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.

Amlodipine↗

Nonaqueous electrochromatography on continuous bed columns of sol-gel bonded large-pore C18 material: separation of retinyl esters.

A nonaqueous electrochromatographic reversed-phase separation method for retinyl esters using continuous bed columns has been developed. The packing material 7 microm Nucleosil 4,000 angstroms C18 was sol-gel bonded in 180 microm I.D. capillaries. The mobile phase used was 2.5 mM lithium acetate in N,N-dimethylformamide-acetonitrile-methanol (2+7+1, v/v). At 350 V/cm and 30 degrees C, this mobile phase composition gave rise to an electroosmotic flow of 1 mm/s. No Joule heating nor bubble formation were observed even at 625 V/cm (17 microA). With a 36 cm L(eff) column complete separation of the commercially available and synthesized standards (all-trans-retinyl acetate, palmitate, heptadecanoate, stearate, oleoate, and linoleoate) was obtained within 10 min. The within-day and between-day variations of retention times of all-trans-retinyl palmitate were <0.3% relative standard deviation (RSD) (n=3) and <2% RSD (n=6), respectively. The within-day and between-day variations of peak areas were both <2% (both n=3). The columns were used for more than 1 month without degradation. Liver extracts from arctic seal were analyzed.

Animals↗

Pressurized gradient capillary electrochromatographic separation of eighteen amino acid derivatives.

A pressurized gradient capillary electrochromatography (pCEC) instrument was developed to separate 18 amino acid derivatives. A reversed-phase C18 column (3 microm, 130 mm x 75 microm I.D.) and an acetate buffer (50 mmol/l NaAc, pH 6.4) with an ion-pair reagent (1% N,N-dimethylformamide) were used to separate derivatized amino acids from a standard solution (2 microg/ml), and the wavelength of the UV-Vis detector was 360 nm. The pressure on the capillary column was kept at approx. 70 Pa and 3 kV positive voltage was added on the outlet end of column. The effect of voltage on the eluting order of amino acids and the resolution of separation were studied, and it was found that when the voltage was higher than 3 kV, the adsorption of amino acids in the porous C18 column occurred. The effect of salt concentration, injection volume, and column length on the separation of amino acids was determined. The amino acid sample was separated by pCEC, and RSDs of the migration times of each amino acid were all less than 2.5%.

Amino Acids↗

Gas chromatographic-mass spectrometric determination of hydrophilic compounds in environmental water by solid-phase extraction with activated carbon fiber felt.

Simple gas chromatographic-mass spectrometric determination of hydrophilic organic compounds in environmental water was developed. A cartridge containing activated carbon fiber felt was made by way of trial and was evaluated for solid-phase extraction of the compounds in water. The hydrophilic compounds investigated were acrylamide, N,N-dimethylacetamide, N,N-dimethylformamide, 1,4-dioxane, furfural, furfuryl alcohol, N-nitrosodiethylamine and N-nitrosodimethylamine. Overall recoveries were good (80-100%) from groundwater and river water. The relative standard deviations ranged from 4.5 to 16% for the target compounds. The minimum detectable concentrations were 0.02 to 0.03 microg/l. This method was successfully applied to several river water samples.

Carbon↗

Gas-liquid chromatographic determination of sulphonamides.

Simultaneous qualitative analysis of fourteen sulpha drugs and their individual quantitative determinations have been performed by gas-liquid chromatography on solutions of dimethylformamide dialkylacetal derivatives of the drugs in acetone. Linear calibration curves were obtained for each sulpha drug under appropriate conditions. The structures of the above derivatives are assumed to be N1-methyl, N4-acetal sulphonamides, which can be detected with an electron capture detector with highly sensitive response. Columns used were 10% OV-101, 5% XE-60 and 5% OV-225.

Acetals↗

Gas chromatographic method for the determination of free and total solanesol in tabacco.

Solanesol, a trisesquiterpenoid alcohol in tobacco leaf, has been shown to be an important precursor of the tumorigenic polynuclear aromatic hydrocarbons of smoke. Thus, a rapid, reproducible method for the determination of leaf solanesol levels is desirable. We developed procedures based on high-temperature gas chromatography for the analyses of free and total solanesol. The alcohol, as its trimethylsilyl derivative, was separated and quantified on a short Dexsil 300 GC column, with 1,3-dimyristin as an internal standard. The free alcohol was determined by direct derivatization of ground tobacco and its hexane extract with N,O-bis(trimethylsily)-acetamide-dimethylformamide reagents. For total solanesol, the ground tobacco or its hexane extract was saponified with ethanolic potassium hydroxide. Acidification and hexane extraction yielded samples suitable for silylation and gas chromatographic analysis. Evaluation of the various methods indicated that free solanesol was best determined in the hexane extract of tobacco, and total solanesol after saponification of ground tobacco. Total solanesol levels in commercially important tobacco types were determined.

Chromatography, Gas↗

Gas-liquid chromatography of nucleosides. Effect of silylating reagents and solvents.

The aims of this investigation were to study the completeness of silylation of nucleosides with three different reagents, bis(trimethylsilyl)trifluoroacetamide (BSTFA), bis(trimethylsilyl)acetamide (BSA) and trimethylsilylimidazole (TMSI), and to investigate the effect of different solvents (acetonitrile, pyridine, dimethylformamide, chloroform, methylene chloride, hexane, benzene, and toluene) on quantitation of derivatization. Closed-tube silylations of the nucleosides were performed with BSTFA, BSA, and TMSI, and for the most complete silylation, the optimal time, temperature, and molar excess of reagent were: for BSTFA, 150 degrees-15 min and 225 molar excess; for TMSI, 60 degrees-3 h and 1000 molar excess; and for BSA, 120 degrees-2 h and 250 molar excess. Also, silylations of seven major and minor nucleosides were carried out using a 1000 molar excess of BSTFA, BSA, and TMSI at 25 degrees with 5 min sonication, and at optimal silylation conditions as described above for the three reagents. The silylating strengths were determined by the increase in RWR (= weight response of nucleoside/weight response of pyrene) values, and are summarized for the amino group containing nucleosides silylated at room temperature as BSTFA greater than TMSI greater than BSA, and for silylation under optimal conditions as BSTFA greater than BSA greater than TMSI. The efficiency of silylation for the hydroxyl group-containing nucleosides silylated at room temperature was BSTFA greater than TMSI greater than BSA, and for silylation under optimal conditions BSTFA greater than TMSI = BSA...

Chromatography, Gas↗

Gas chromatographic head-space determination of residual acrylonitrile in acrylonitrile-butadiene-styrene resins and migration into a simulated fatty foodstuffs liquid.

Head-space methods are described for the determination of residual acrylonitrile in acrylonitrile-butadiene-styrene resins and in olive oil, which simulates fatty foodstuffs. Dimethylformamide was used as solvent for the resin, with flame ionization detection. The injection of water into the resin dispersion prior to head-space analysis greatly enhances the detection capabilities. The use of a nitrogen-selective detector required dimethyl sulphoxide as the solvent. The determination of acrylonitrile in olive oil was carried out employing both types of detector. The detection sensitivity was much greater with the nitrogen-selective detector.

Acrylonitrile↗

N-dimethylaminomethylene derivatives for the gas-liquid chromatography of primary sulfonamides.

Dimethylformamide dialkylacetals have been found to react readily with primary sulfonamides to form N-dimethylaminomethylene derivatives. These compounds possess excellent gas-liquid chromatographic properties and can be conveniently prepared at the submicrogram level. Their retention times are much greater than those of other sulfonamide derivatives (e.g., N,N-dimethyl) but their ease of preparation and lack of absorptive properties make them attractive for gas-liquid chromatographic studies. The practical applicability of this derivatization approach to biological studies is illustrated by the gas-liquid chromatographic determination of 3-bromo-5-cyanobenzenesulfonamide in ovine blood using 3,5-dibromobenzenesulfonamide as the internal standard. The method has a detection limit of 25 ppb with electron capture detection.

Animals↗

Characterization of highly sulfated cyclodextrins.

A class of highly sulfated cyclodextrins (HS-CDs) was developed for enantiomeric separation of chiral compounds by capillary electrophoresis (CE). The HS-CDs were produced by a facile single-step direct sulfation of cyclodextrin using sulfur trioxide-trimethylamine complex in dimethylformamide. Characterization of the HS-CDs by electrospray ionization mass spectrometry and by CE using a well-established indirect detection method indicated the species have very narrow heterogeneity in terms of degree of sulfation. Elemental analysis of the HS-alpha-, beta- and gamma-CDs showed that the average sulfate contents were 11, 12, and 13 per CD molecule, respectively. The 13C NMR of HS-CDs is consistent with the structural assignment of nearly complete sulfation at C-6 primary hydroxyl groups and partial sulfation at the C-2 secondary hydroxyls (>70%), while the C-3 hydroxyls remain unsubstituted. Enantiomeric separation by CE using the HS-CDs as chiral selectors showed that HS-alpha-, beta- and gamma-CDs complement each other by exhibiting different chiral selectivities, resulting in resolution of many chiral neutral, acidic and basic compounds of greatly varying structural features. The part of HS-CD that interacts with the guest molecule during complexation and, therefore, the receiving end of the cyclodextrin hydrophobic bucket was surrounded with largely regiospecifically substituted C-2 sulfates and intact C-3 hydroxyls, both at the equatorial positions. Such global regiospecific structural arrangement in HS-CDs provides differential diasteroisomeric complexation is proposed to be the principal contributing factor in the resolving racemates.

Cyclodextrins↗

Elution behavior of unsaponifiable lipids with various capillary electrochromatographic stationary phases.

Capillary electrochromatographic (CEC) separations of unsaponifiable lipids, tocopherols (T), tocotrienols (T3), and plant sterols were studied under various conditions. Investigated stationary phases include pentafluorophenylsilica (PFPS), triacontylsilica (TCS), and octadecylsilica (ODS) phases. A baseline separation of four sterols (ergosterol, lanosterol, sitosterol and stigmasterol) on ODS was achieved and their elution order was found to be dictated by side-chain structures. CEC of the tocol-derived compounds on PFPS in aqueous methanol yielded the most satisfactory results with complete resolution of all components eluting in the order deltaT3>beta3>gammaT3>epsilonP>alphaT3>deltaT>zeta2T>betaT>gammaT>alphaT, while a reversal in elution of the epsilonT-alphaT3 pair was observed in aqueous acetonitrile. CEC with a TCS phase in non-aqueous methanol led to a different elution pattern deltaT3>gammaT3>betaT3>alphaT3epsilonT>deltaT>(zeta2+gamma)T>betaT>alphaT, despite favorable resolution of the (gamma-zeta2)T pair along with the observation of inseparable(beta-gamma)T and (beta-gamma)T3 pairs in non-aqueous dimethylformamide. Non-aqueous acetonitrile mobile phases provided unique selectivity for the (gamma-zeta2)T pair and isomer separations on TCS. Variations in separation and retention factors of relevant antioxidant species with CEC variables were evaluated. Examples of CEC quantification of unsaponifiable fractions of rice bran oils and soybean oils are presented.

Chromatography, Micellar Electrokinetic Capillary↗

Matrix solid-phase dispersion extraction and high-performance liquid chromatographic determination of residual sulfonamides in chicken.

Simultaneous determination of the six sulfonamides (SAs) sulfadiazine, sulfadimidine, sulfamonomethoxine, sulfamethoxazole, sulfadimethoxine and sulfaquinoxaline in chicken using matrix solid-phase dispersion (MSPD) with neutral aluminium oxide as an MSPD sorbent and high-performance liquid chromatography (HPLC) is presented. In the present MSPD, six SAs could be isolated by only one step, elution with a 70% (v/v) aqueous ethanol solution, without the sorbent conditioning and the sorbent-tissue matrix washing. For the HPLC determination, a LiChrospher 100 RP-8 and a mixture of 1% acetic acid solution (pH 3.0, in water)-acetonitrile-N,N-dimethylformamide (78:22:5, v/v/v) as the mobile phase with a photodiode array detector were used. Average recoveries were greater than 87.6% with relative standard deviations between 0.5 and 8.6%. The total time and amount of solvent required for the analysis of one sample were <1.5 h and <12 ml, respectively.

Animals↗