Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Chlorophenols”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources
PubMed2004

Aerosol-OT-gamma-alumina admicelles for the concentration of hydrophobic organic compounds in water.

A novel admicelle composing of a dialkylated anionic surfactant, di-2-ethylhexyl sodium sulfosuccinate (Aerosol-OT, AOT) and gamma-alumina was prepared by mixing them in acidic aqueous solution. The amount of the maximum sorption of AOT on 1 g of alumina at pH 2 was ca. 130 mg. By comparing the fluorescence spectra of N-phenyl-1-naphthylamine in different solvents, the solvent property of AOT-gamma-alumina admicelles was corresponding to that of toluene or diethyl ether. Thus, the AOT-gamma-alumina admicelles had greater hydrophobicity than SDS-gamma-alumina admicelles having similar hydrophobicity to 1-octanol or ethyl acetate. Hydrophobic organic compounds, chlorophenols having more than three chloro substituents, octylphenol, nonylphenol, dibutyl phthalate was almost quantitatively (98% or more) collected onto AOT admicelles composing of 1.5 g gamma-alumina and 150 mg AOT. The greater collection yields rather than those in SDS-admicellar system were ascribable to greater hydrophobicity and stability of AOT admicelles. After the 500-fold concentration, traces (nM) of organic contaminants in water samples were successfully detected with an HPLC having a photometric detector.

Aluminum↗
PubMed2004

High performance solid-phase analytical derivatization of phenols for gas chromatography-mass spectrometry.

The solid-phase analytical derivatization of phenols with pentafluoropyridine is performed. Fourteen phenols including chlorophenols and alkylphenols, could be efficiently adsorbed on a strong anion-exchange solid phase, Oasis MAX. The phenols adsorbed on Oasis MAX as phenolate ions were desorbed after derivatization with pentafluoropyridine. After optimization of the adsorption and derivatization, we established a procedure for the determination of the phenols in water samples by means of GC-MS. Under the optimized conditions, calibration curves were linear in the range of 10-1000 ng/l for the alkylphenols (100-10000 ng/l for nonylphenol) and 50-1000 ng/l for the others. By processing 100 ml samples, the method detection limits (MDLs) were in the range of 0.45-2.3 ng/l for the alkylphenols (8.5 ng/l for nonylphenol) and 2.4-16 ng/l for the others. Compared with the biphasic reaction system, the signal-to-noise ratios obtained by the solid-phase analytical derivatization were significantly higher. This is ascribed to the fact that coexisting neutral and acidic compounds are efficiently removed from the sample solution by this solid-phase analytical derivatization system.

Absorption↗
PubMed2004

Parts per quadrillion level ultra-trace determination of polar and nonpolar compounds via solvent-free capillary microextraction on surface-bonded sol-gel polytetrahydrofuran coating and gas chromatography-flame ionization detection.

Sol-gel polytetrahydrofuran (poly-THF) coating was developed for high-sensitivity sample preconcentration by capillary microextraction (CME). Parts per quadrillion (ppq) level detection limits were achieved for both polar and nonpolar analytes through sample preconcentration on sol-gel poly-THF coated microextraction capillaries followed by gas chromatography (GC) analysis of the extracted compounds using a flame ionization detector (FID). The sol-gel coating was in situ created on the inner walls of a fused silica capillary using a sol solution containing poly-THF as an organic component, methyltrimethoxysilane (MTMOS) as a sol-gel precursor, trifluoroacetic acid (TFA, 5% water) as a sol-gel catalyst, and hexamethyldisilazane (HMDS) as a deactivating reagent. The sol solution was introduced into a hydrothermally-treated fused silica capillary and the sol-gel reactions were allowed to take place inside the capillary for 60 min. A wall-bonded coating was formed due to the condensation of silanol groups residing on the capillary inner surface with those on the sol-gel network fragments evolving in close vicinity of the capillary walls. Poly-THF is a medium polarity polymer, and was found to be effective in carrying out simultaneous extraction of both polar and nonpolar analytes. Efficient extraction of a wide range of trace analytes from aqueous samples was accomplished using sol-gel poly-THF coated fused silica capillaries for further analysis by GC. The test analytes included polycyclic aromatic hydrocarbons (PAHs), aldehydes, ketones, chlorophenols, and alcohols. To our knowledge, this is the first report on the use of a poly-THF based sol-gel material in analytical microextraction. Sol-gel poly-THF coated CME capillaries showed excellent solvent and thermal stability (>320 degrees C).

Chromatography, Gas↗
PubMed2005

Determination of phenols in lake and ground water samples by stir bar sorptive extraction-thermal desorption-gas chromatography-mass spectrometry.

A simple and inexpensive method for sorptive extraction of phenols from water samples is presented. A polydimethyl siloxane (PDMS) stir bar (Twister) is used as an extraction medium for derivatized phenols, which is thermally desorbed and analyzed by gas chromatography-mass spectrometry (GC-MS). Its performance was illustrated and evaluated for the enrichment of microg l(-1) to ng l(-1) of phenol and selected chlorophenols in water samples. The method showed good linearity, recoveries and blank levels, as well as advantages such as sensitivity, simplicity, low cost and high feasibility, being successfully applied for the analysis of phenolic compounds in natural water samples.

Calibration↗
PubMed2005

Measurement of monomolecular binding constants of neutral phenols into the beta-cyclodextrin by continuous frontal analysis in capillary and microchip electrophoresis via a competitive assay.

Measurement of binding constant by chip electrophoresis is a very promising technique for the high throughput screening of non-covalent interactions. Among the different electrophoretic methods available that yield the binding parameters, continuous frontal analysis is the most appropriate for a transposition from capillary electrophoresis (CE) to microchip electrophoresis. Implementation of this methodology in microchip was exemplified by the measurement of inclusion constants of 2-naphtalenesulfonate and neutral phenols (phenol, 4-chlorophenol and 4-nitrophenol) into beta-cyclodextrin by competitive assays. The issue of competitor choice is discussed in relation to its appropriateness for proper monitoring of the interaction.

Electrophoresis, Capillary↗
PubMed2006

Development of a solid-phase microextraction method for the analysis of phenolic flame retardants in water samples.

A solid-phase microextraction (SPME) method for the ultra-trace determination of brominated phenols in aqueous samples has been developed and is reported for the first time to the best of our knowledge. 3,5,3',5'-tetrabromobisphenol A (TBBPA), the most widely used brominated flame retardant, and other phenolic flame retardants in commercial use, such as 2,4-dibromophenol (2,4-DBP), 2,4,6-tribromophenol (TBP) and pentabromophenol (PBP) have been included as target analytes. The analytical procedure involves the in situ acetylation-SPME and gas chromatography-mass spectrometry (GC-MS) determination of the target analytes. A multi-factor categorical experimental design was created to study the main parameters affecting the extraction efficiency, allowing also the evaluation of interaction effects between factors. The factors studied were type of fiber, extraction mode, exposing the fiber directly into the sample (DSPME) or into the headspace over the sample (HSSPME), and extraction temperature. Carboxen-polydimethylsiloxane (CAR-PDMS) fiber appeared to be the most suitable of the five fibers tested for the extraction of most compounds, excluding PBP and TBBPA for which polydimethylsiloxane (PDMS) was the most efficient coating. The highest response was achieved for both fibers sampling in headspace mode at 100 degrees C. In order to test the linearity of the method, calibration studies were performed with both CAR-PDMS and PDMS coatings. For both fibers, the method was linear in a range of 2 orders of magnitude, giving relative standard deviation (RSD%) below 10% for most compounds and detection limits at the low pg/mL level. In addition, the feasibility of the method for simultaneous determination of chlorinated and brominated phenols was studied. Finally, the method was applied to several real samples including tap water and effluent and influent waste water samples from an urban treatment plant, in which several phenolic compounds, such as phenol, methylphenols and chlorophenols, could be detected and quantified.

Acetylation↗
PubMed2006

Evaluation of the estrogenic potential of river and treated waters in the Paris area (France) using in vivo and in vitro assays.

For many years, surface waters have been shown to be contaminated by endocrine-disrupting compounds (EDCs), which can cause adverse effects on human and wildlife growth, development, and reproduction. It is therefore of primary importance to determine if drinking water could be contaminated by EDCs when produced from polluted surface waters. It is also essential to determine if disinfection by-products can account for estrogenic activity in treated waters. The estrogenic potential of river and treated waters was investigated using an in vivo assay. Adult male zebrafish were placed in three drinking water treatment plants (DWTPs) in the Paris area and exposed for 1 month to the two types of waters. After exposure, vitellogenin (VTG) was measured in the plasma of fish using a competitive ELISA. In addition, an in vitro assay (MELN cells) was used to assess the estrogenic potential of 10 major chlorination by-products. No significant induction of VTG was observed in fish exposed to river or treated waters. Among the 10 chlorination by-products tested, only 2-chlorophenol was found to be weakly estrogenic at concentrations up to 1mg/L. Therefore, the risk for the three DWTPs studied to produce drinking water with significant level of estrogenic substances appears to be low.

Animals↗
PubMed2005

Polychlorinated diphenyl ethers (PCDEs): environmental levels, toxicity and human exposure: a review of the published literature.

This paper reviews the state of the science regarding polychlorinated diphenyl ethers (PCDEs), a group of halogenated aromatic compounds, which are structurally related to polychlorinated biphenyls (PCBs) and polychlorinated dibenzofurans (PCDFs). Special attention is paid to the environmental levels, toxicity, and human exposure. PCDEs have been detected in a number of environmental samples, and their widespread occurrence in the environment is mainly the result of their presence as impurities in chlorophenol preparations. In humans, PCDE congeners have been detected in adipose tissue. As for other persistent organic pollutants (POPs), dietary intake is very probably the main route of exposure to PCDEs for the general population. However, data concerning PCDE levels in foodstuffs are very limited. It is concluded that investigations on experimental toxicity, dietary intake, and potential human health effects of PCDEs are clearly necessary.

Animals↗
PubMed2005

The haloperoxidase of the agaric fungus Agrocybe aegerita hydroxylates toluene and naphthalene.

The mushroom Agrocybe aegerita secretes a peroxidase (AaP) that catalyzes halogenations and hydroxylations. Phenol was brominated to 2- and 4-bromophenol (ratio 1:4) and chlorinated to a lesser extent to 2-chlorophenol. The purified enzyme was found to oxidize toluene via benzyl alcohol and benzaldehyde into benzoic acid. A second fraction of toluene was hydroxylated to give p-cresol as well as o-cresol and methyl-p-benzoquinone. The UV-Vis absorption spectrum of purified AaP showed high similarity to a resting state cytochrome P450 with the Soret band at 420 nm and additional maxima at 278, 358, 541 and 571 nm; the AaP CO-complex had a distinct absorption maximum at 445 nm that is characteristic for heme-thiolate proteins. AaP regioselectively hydroxylated naphthalene to 1-naphthol and traces of 2-naphthol (ratio 36:1). H2O2 was necessarily required for AaP function and hence the hydroxylations catalyzed by AaP can be designated as peroxygenation and the enzyme as an extracellular peroxygenase.

Agaricales↗
PubMed2004

Development of a rapid yeast estrogen bioassay, based on the expression of green fluorescent protein.

The aim of this study was to develop an estrogen transcription activation assay that is sensitive, fast and easy to use in the routine screening of estrogen activity in complex matrices such as agricultural products. Recombinant yeast cells were constructed that express the human estrogen receptor alpha (ER alpha) and beta-Galactosidase (beta Gal), Luciferase (Luc) or yeast Enhanced Green Fluorescence Protein (yEGFP) as a reporter protein. Compared to other yeast assays, these new cells contain both the receptor construct as well as the reporter construct stably integrated in the genome with only one copy of the reporter construct. Dose-response curves for 17beta-estradiol (E2) obtained with the beta Gal assay were similar to those reported and the calculated EC(50) of 0.2 nM was even slightly better. However, 5 days of incubation were required before the chlorophenol red product could be measured. The Luc assay was as sensitive as the beta Gal assay and gave an EC(50) of 0.2 nM, but the signals were rather low and, although the assay can be performed within 1 day, the procedure is laborious and caused variability. The yEGFP revealed an EC(50) of 0.4 nM, but compared to the beta Gal and the Luc assay, the response was much better. This yEGFP assay can be performed completely in 96 well plates within 4 h and does not need cell wall disruption nor does it need the addition of a substrate. This makes the test sensitive, rapid and convenient with high reproducibility and small variation. These qualities make that this yEGFP assay is suited to be used as a high throughput system.

Biological Assay↗
PubMed2005

Comparisons of porous and adsorption properties of carbons activated by steam and KOH.

In this work, fir woods and pistachio shells were used as source materials to prepare porous carbons, which were activated by physical (steam) and chemical (KOH) methods. Pore properties of these activated carbons including the BET surface area, pore volume, pore size distribution, and pore diameter were first characterized by a t-plot method based on N(2) adsorption isotherms. Highly porous activated carbons with BET surface area up to 1009-1096 m(2)/g were obtained. The steam and KOH activation methods produced carbons with mesopore content in the range 9-15 and 33-49%, respectively. The adsorption equilibria and kinetics of tannic acid, methylene blue, 4-chlorophenol, and phenol from water on such carbons at 30 degrees C were then investigated to check their chemical characteristics. The Freundlich equation gave a better fit to all adsorption isotherms than the Langmuir equation. On the other hand, the intraparticle diffusion model could best follow all adsorption processes. In comparison with KOH-activated carbons, it was shown that the rate of external surface adsorption with steam-activated carbons was significantly higher but the rate of intraparticle diffusion was much lower.

Adsorption↗
PubMed2005

Ozonation of activated carbons: Effect on the adsorption of selected phenolic compounds from aqueous solutions.

The impact of ozonation on textural and chemical surface characteristics of two granular activated carbons (GAC), namely F400 and AQ40, and their ability to adsorb phenol (P), p-nitrophenol (PNP), and p-chlorophenol (PCP) from aqueous solutions have been studied. The porous structure of the ozone-treated carbons remained practically unchanged with regard to the virgin GAC. However, important modifications of the chemical surface and hydrophobicity were observed from FTIR spectroscopy, pH titrations, and determination of pH(PZC). As a rule, the ozone treatment at either room temperature (i.e., about 25 degrees C) or 100 degrees C gave rise to acidic surface oxygen groups (SOG). At 25 degrees C primarily carboxylic acids were formed while a more homogeneous distribution of carboxylic, lactonic, hydroxyl, and carbonyl groups was obtained at 100 degrees C. The experimental isotherms for phenolic compounds on both GAC were analyzed using the Langmuir model. Dispersive interactions between pi electrons of the ring of the aromatics and those of the carbon basal planes were thought to be the primary forces responsible for the physical adsorption whereas oxidative coupling of phenolic compounds catalyzed by basic SOG was a major cause of irreversible adsorption. The exposure of both GAC to ozone at room temperature decreased their ability to adsorb P, PNP, and PCP. However, when ozone was applied at 100 degrees C adsorption was not prevented but in some cases (P and PNP on F400) the adsorption process was even enhanced.

Adsorption↗
PubMed2005

Pore structure and adsorption performance of the KOH-activated carbons prepared from corncob.

Carbonaceous adsorbents with controllable surface area were chemically activated with KOH at 780 degrees C from chars that were carbonized from corncobs at 450 degrees C. The pore properties, including BET surface area, pore volume, pore size distribution, and mean pore diameter of these activated carbons, were characterized by the t-plot method based on N(2) adsorption isotherms. Two groups are classified according to the types of adsorption/desorption isotherms. Group I corncob-derived activated carbons, with KOH/char ratios from 0.5 to 2, exhibited BET surface area ranging from 841 to 1221 m(2)/g. Group II corncob-derived activated carbons, with KOH/char rations from 3 to 6, showed high BET surface areas, from 1976 to 2595 m(2)/g. From scanning electron microscopic (SEM) results, the surface morphology of honeycombed holes on corncob-derived activated carbons was significantly influenced by the KOH/char ratios. The adsorption kinetics of methylene blue, basic brown 1, acid blue 74, 2,4-dichlorophenol, 4-chlorophenol, and phenol from water at 30 degrees C were studied on the two groups of activated carbons, which were suitably described by two simplified kinetic models, pseudo-first-order and pseudo-second-order equations. The effective particle diffusivities of phenols and dyes at the corncob-derived activated carbons of group II are higher than those of ordinary activated carbons. The high-surface-area activated carbons were demonstrated to be promising adsorbents for pollution control and for other applications.

Adsorption↗
PubMed2005

Preparation of highly porous carbon from fir wood by KOH etching and CO2 gasification for adsorption of dyes and phenols from water.

Fir wood was first carbonized for 1.5 h at 450 degrees C, then soaked in a KOH solution KOH/char ratio of 1, and last activated for 1 h at 780 degrees C. During the last hour CO2 was poured in for further activation for 0, 15, 30, and 60 min, respectively. Carbonaceous adsorbents with controllable surface area and pore structure were chemically activated from carbonized fir wood (i.e., char) by KOH etching and CO2 gasification. The pore properties, including the BET surface area, pore volume, pore size distribution, and pore diameter, of these activated carbons were first characterized by the t-plot method based on N2 adsorption isotherms. Fir-wood carbon activated with CO2 gasification from 0 to 60 min exhibited a BET surface area ranging from 1371 to 2821 m2 g(-1), with a pore volume significantly increased from 0.81 to 1.73 m2 g(-1). Scanning electron microscopic (SEM) results showed that the surfaces of honeycombed holes in these carbons were significantly different from those of carbons without CO2 gasification. The adsorption of methylene blue, basic brown 1, acid blue 74, p-nitrophenol, p-chlorophenol, p-cresol, and phenol from water on all the carbons studied was examined to check their chemical characteristics. Adsorption kinetics was in agreement with the Elovich equation, and all equilibrium isotherms were in agreement with the Langmuir equation. These results were used to compare the Elovich parameter (1/b) and the adsorption quantity of the unit area (q(mon)/Sp) of activated carbons with different CO2 gasification durations. This work facilitated the preparation of activated carbon by effectively controlling pore structures and the adsorption performance of the activated carbon on adsorbates of different molecular forms.

Journal Article↗
PubMed2005

Characterization and adsorption properties of tetrabutylammonium montmorillonite (TBAM) clay: thermodynamic and kinetic calculations.

The montmorillonite has been subjected to modification through ion-exchange reaction by tetrabutylammonium bromide (TBAB). The modified sample was studied by X-ray diffraction (XRD) technique, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA) methods. The basal spacing of modified montmorillonite was determined as 14.40 A. The IR spectra of modified montmorillonite showed CH vibrations. The characterization of tetrabutylammonium montmorillonite (TBAM) and the adsorption of p-chlorophenol (p-CP) on organomontmorillonite was studied as a function of the solution concentration and temperature. The observed adsorption rates were found to fit to the pseudo-second-order kinetics. The rate constants were calculated for temperatures ranging between 25.0-35.0 degrees C at constant concentration. The adsorption energy, E, and adsorption capacity, (q(m)), for phenolic compounds adsorbing on organomontmorillonite were estimated using the Dubinin-Radushkevich (D-R) equation. Thermodynamic parameters (delta g(a) = -11.063 and -11.802 kJ/mol, delta h(a) = -30.032 and -30.789 kJ/mol, delta s(a) = -0.0636 and -0.0637 kJ/mol K for 298 and 308 K, respectively) were calculated by a new approximation from the adsorption isotherms of p-CP on organomontmorillonite. These isotherms were modeled according to Freundlich and Dubinin-Radushkevich adsorption isotherms, through which the first-order and second-order coefficients (K(1ads) = 0.0152 and 0.0127 micromol/g min, K(2ads) = 0.0130 and 0.0108 L/min micromol, respectively) were obtained at 298 and 308 K.

Journal Article↗
PubMed2006

Tunable sustained release properties of "onion-like" phospholipids multilamellar vesicles.

"Onion-type" multilamellar micro-vesicles of phospholipids (spherulites) were doped with different amounts of a cationic cosurfactant ((-)N-dodecyl-N-methylephedrinium bromide) for the purpose of controlling the sustained release of anionic drugs. Three weak acid probes (methyl red, chlorophenol red, and ibuprofen) were encapsulated in the vesicles as drug models. The kinetics and rate of release were studied by absorption spectroscopy and HPLC. The effect of probe charge (pH above and below pKa of the probes), of cosurfactant concentration and of added salt was investigated. It was found that, above pKa (i.e., when the probes are anionic), the release can be almost totally inhibited by doping the vesicles with 2.4 wt% of cationic cosurfactant. The release properties can even be finely tuned by controlling the amounts of the cosurfactant. Salt and pH effects demonstrate the role of electrostatic interactions in sustaining the release.

Azo Compounds↗
PubMed2005

Studies on adsorption, desorption and biodegradation of pentachlorophenol by the anaerobic granular sludge in an upflow anaerobic sludge blanket (UASB) reactor.

PCP-degrading anaerobic granular sludge could be formed in an upflow anaerobic sludge blanket (UASB) reactor that was seeded with anaerobic sludge acclimated to chlorophenol. When hydraulic retention time (HRT) was 20-22 h and PCP loading rate was 200-220 mgL(-1)d(-1), the wastewater containing 170-180 mgL(-1) PCP could be treated effectively in UASB reactor, and PCP removal rate reached up to 99.5%. PCP adsorption and desorption by anaerobic granular sludge follow Freundlich isothermal equation and part of adsorption capacity was not reversible. And the isothermal equation could well describe the variation law of PCP adsorption and desorption by anaerobic granular sludge. The results indicated that the principal removal mechanism of PCP was biodegradation by anaerobic granular sludge, but not adsorption or volatilization.

Adsorption↗
PubMed2006

Recycling of agricultural solid waste, coir pith: removal of anions, heavy metals, organics and dyes from water by adsorption onto ZnCl2 activated coir pith carbon.

The abundant lignocellulosic agricultural waste, coir pith is used to develop ZnCl(2) activated carbon and applied to the removal of toxic anions, heavy metals, organic compounds and dyes from water. Sorption of inorganic anions such as nitrate, thiocyanate, selenite, chromium(VI), vanadium(V), sulfate, molybdate, phosphate and heavy metals such as nickel(II) and mercury(II) has been studied. Removal of organics such as resorcinol, 4-nitrophenol, catechol, bisphenol A, 2-aminophenol, quinol, O-cresol, phenol and 2-chlorophenol has also been investigated. Uptake of acidic dyes such as acid brilliant blue, acid violet, basic dyes such as methylene blue, rhodamine B, direct dyes such as direct red 12B, congo red and reactive dyes such as procion red, procion orange were also examined to assess the possible use of the adsorbent for the treatment of contaminated ground water. Favorable conditions for maximum removal of all adsorbates at the adsorbate concentration of 20 mg/L were used. Results show that ZnCl(2) activated coir pith carbon is effective for the removal of toxic pollutants from water.

Adsorption↗