Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ACRYLIC RESINS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,153 records · Page 64Linked to original sources

Allergic contact dermatitis due to urethane acrylate in ultraviolet cured inks.

Seven workers exposed to ultraviolet printing inks developed contact dermatitis. Six cases were allergic and one irritant. A urethane acrylate resin accounted for five cases of sensitisation, one of which was also sensitive to pentaerythritol triacrylate and another also to an epoxy acrylate resin. One instance of allergy to trimethylpropane triacrylate accounted for the sixth case of contact dermatitis in this group of workers. An irritant reaction is presumed to account for the dermatitis in the individual not proved to have cutaneous allergy by patch tests. In this instance trimethylpropane triacrylate was thought to be the most likely irritating agent. Laboratory investigation proved urethane acrylate to be an allergen. The results of investigations of the sensitisation potentials of urethane acrylate, methylmethacrylate, epoxy acrylate resins, toluene-2,4-diisocyanate, and other multifunctional acrylic monomers in the albino guinea pig are presented. The interpretation of such predictive tests is discussed.

Acrylates↗

The effect of custom tray material type and fabrication technique on tensile bond strength of impression material adhesive systems.

The purpose of this investigation was to evaluate the tensile bond strengths of two impression material systems (polysulphide and polyvinyl siloxane) to two custom tray materials [autopolymerizing and visible light-cured (VLC) acrylic resin]. The effect of polymerizing the tray materials directly against wax spacer and tin foil was evaluated for each material. Polymerizing tray materials against tin foil significantly increased the bond strengths of polysulphide and polyvinyl siloxane impression materials to VLC and autopolymerizing acrylic resin tray materials. Polyvinyl siloxane VLC cured against tin foil combination produced the strongest bond. The VLC resin tray material generated greater bond strength than autopolymerizing acrylic resin when polymerized against tin foil.

Acrylic Resins↗

High frequency of in situ hybridization on thin plastic sections of human placenta with a cDNA probe for beta hCG.

We describe two different techniques with plastic embedding in in situ hybridization histochemistry (ISHH). Their applicability was demonstrated by use of human placenta of the tenth gestational week and a tritium-labeled cDNA probe for the beta-subunit of hCG. In the first method, ISHH was performed on whole pieces of tissue (en bloc ISHH) pretreated with a weak acid solution, embedded in methacrylate, and sectioned at 3 microns for autoradiography. In the second technique, en bloc ISHH was carried out on tissue pre-treated with the weak acid and thereafter with detergent to further facilitate probe penetration. An acrylic resin was used for embedding, and section thickness was reduced to 1 microns. With both techniques, beta hCG cDNA/mRNA hybrids were localized exclusively to the syncytiotrophoblast (ST), in agreement with a previous study using sections of frozen placentas for hybridization to the same probe. However, owing to the higher resolution of the plastic sections the reliability of this localization was greatly increased. The number of autoradiographic grains over the acrylic resin 1-microns sections was found to be considerably higher than that over the methacrylate 3-microns sections. This study showed that treatment of tissue with detergent before en bloc ISHH, with subsequent embedding in acrylic resin and sectioning at 1 microns, gives high resolution in combination with a high signal-to-noise ratio after autoradiography. As the acrylic resin permits cutting of ultrathin sections, the results suggest that the technique may become useful for ISHH studies at the subcellular level.

Autoradiography↗

Biomechanical considerations in osseointegrated prostheses.

On the basis of the previous discussions, several conclusions may be drawn. 1. The close apposition of bone to the titanium implant is the essential feature that allows a transmission of stress from the implant to the bone without any appreciable relative motion or abrasion. The absence of any intermediate fibrotic layer allows stress to be transmitted without any progressive change in the bond or contact between the bone and implant. 2. The use of a threaded screw provides a form of interlocking with the bone on a macroscopic scale that allows full development of the strength of the bone in shear or compression. A smooth, cylindrical implant may require an adhesive bond for satisfactory performance, but a screw shape is able to work as long as the apposition of bone and implant is close, whether or not a true adhesive bond is developed. 3. The distribution of a vertical or lateral load applied to a fixed partial denture depends on the number, arrangement, and stiffness of abutment fixtures used, as well as the form and stiffness of the fixed prosthesis itself. In general a stiff fixed partial denture will distribute loads to several fixtures more effectively. A flexible prosthesis may be adequate if the strength developed by each fixture is able to carry the full load that is applied. Cantilevered ends of a fixed partial denture increases the loading on the first screw nearest the cantilevered end. Moderate overhangs may be tolerated if the fixtures are sufficiently strong. 4. A tight connection of the fixed partial denture to fixtures provides a combined structure that can act in concert with the bone to provide a greater strength than that of the fixture or the jaw bone alone. 5. The osseointegrated implant provides a direct contact with bone and therefore will transmit any stress waves or shocks applied to the fixtures. For this reason it is advisable to use a shock-absorbing material such as acrylic resin in the form of acrylic resin artificial teeth in the fixed partial denture. This arrangement allows for the development of a stiff and strong substructure with adequate shock protection on its outer surface.

Bone Screws↗

Effect of processing variables (different compression packing processes and investment material types) and time on the dimensional accuracy of polymethyl methacrylate denture bases.

In this study we determined the effect of different compression packing processes, investment materials (a hemihydrate and dental stone) and time on the dimensional accuracy of polymethyl metacrylate denture bases. Square stainless steel plates (15 mm x 15 mm x 5 mm) were prepared to make an acrylic resin specimen. The linear dimensional changes of acrylic resin were determined by measuring the distances of fix points. Measurements were made at 24 hours, 48 hours, 12 days and 30 days after setting with a digital compass. Dimensional changes of test specimens that were obtained with three different flasks and two press techniques were compared by univariate analysis. Measurements of the linear dimensions of specimens cured by different compression packing techniques suggested that differences existed. The time interval differences were not significant. According to the results; flask and investment material types affect the dimensional accuracy of test specimens (p < 0.05). The least dimensional change observed in the specimens was obtained with Type 1 flask-dental stone-manual press combinations.

Acrylic Resins↗

Tissue healing under provisional restorations with ovate pontics: a pilot human histological study.

STATEMENT OF PROBLEM: Ovate pontics mimic the natural tooth contour and provide an esthetic result however, few studies have evaluated the histological changes in underlying tissues. PURPOSE: The purpose of this pilot study was to histologically evaluate the healing of gingival tissues in contact with provisional ovate pontics after 2 weeks. MATERIAL AND METHODS: Three patients requiring fixed partial dentures participated in this study. The provisional restorations consisted of a fixed partial denture having 2 ovate pontics: one in acrylic resin (Jet), with an ovate shell made of low-fusing ceramic (Duceram LFC); the other made completely of the same acrylic resin (control). After 2 weeks, biopsies of the gingival tissues beneath the pontics were retrieved for histological examination, and immunohistochemistry for evaluation of the vascular endothelial growth factor (VEGF) was performed. Data were analyzed using descriptive statistics. RESULTS: Clinically, all of the ovate pontic-prepared sites showed partial healing. Histologically, the thickness of the entire mucosa was similar in both specimens; however, in some regions, the epithelium presented ulcerations that were generally deeper and more frequent in control sites than in test sites. Immunohistochemical results showed that tissues beneath LFC pontics seemed to be less inflamed since they demonstrated a lower expression of VEGF (10.7 +/- .8) compared to those beneath acrylic resin ovate pontics (33.9 +/- 2.5). CONCLUSION: This pilot study demonstrated that the placement of provisional LFC ovate pontics may be advantageous for the reparative processes of the underlying tissues.

Acrylic Resins↗

Temporary space maintainers retained with composite resin. Part II: Fracture load in vitro.

The average fracture load during occlusal loading of pontics which were bonded to natural abutment teeth in vitro was found to be 56.1, 57.5 and 74.2 kg for natural, acrylic resin, and Restodent pontics, respectively. Coating the roots of the abutment teeth with a thin layer of silicone rubber before embedding them in stone slightly reduced the strength of the fixed partial dentures. Thermocycling the specimens with coated roots caused a considerable decrease in strength to fracture loads of 33.0, 17.9, and 37.3 kg for natural, acrylic resin, and Restodent pontics, respectively. Fracture of the enamel of natural tooth pontics was observed in a few specimens. The superior strength of the fixed partial dentures with natural tooth and Restodent pontics would indicate that these pontics are superior for clinical trials rather than acrylic resin pontics.

Acrylic Resins↗

Flexural strength and moduli of hypoallergenic denture base materials.

STATEMENT OF PROBLEM: Hypoallergenic denture base materials show no residual methyl methacrylate (MMA) or significantly lower residual MMA monomer content compared to polymethyl methacrylate-based (PMMA) heat-polymerizing acrylic resin. There is insufficient knowledge of the mechanical properties of hypoallergenic denture base materials to warrant their use in place of PMMA-based acrylic resins for patients with allergic reaction to MMA. PURPOSE: This in vitro study compared flexural strength and flexural modulus of 4 hypoallergenic denture base materials with flexural strength/modulus of a PMMA heat-polymerizing acrylic resin. MATERIAL AND METHODS: The following denture base resins were examined: Sinomer (heat-polymerized, modified methacrylate), Polyan (thermoplastic, modified methacrylate), Promysan (thermoplastic, enterephthalate-based), Microbase (microwave-polymerized, polyurethane-based), and Paladon 65 (heat-polymerized, methacrylate, control group). Specimens of each material were tested for flexural strength and flexural modulus (MPa, n = 5) according to ISO 1567:1999. The data were analyzed with 1-way analysis of variance and the Bonferroni-Dunn multiple comparisons post hoc analysis for each test variable (alpha=.05). RESULTS: Flexural strength of Microbase (67.2 +/- 5.3 MPa) was significantly lower than Paladon 65 (78.6 +/- 5.5 MPa, P <.0001). Flexural strength of Polyan (79.7 +/- 4.2 MPa, P =.599), Promysan (83.5 +/- 3.8 MPa, P =.412), and Sinomer (72.3 +/- 2.1 MPa, P =.015) did not differ significantly from the control group. Significantly lower flexural modulus was obtained from Sinomer (1720 +/- 30 MPa, P =.0007) compared to the PMMA control group (2050 +/- 40 MPa), whereas the flexural modulus of Promysan (2350 +/- 170 MPa, P =.0005) was significantly higher than the PMMA material. Microbase (2100 +/- 210 MPa, P =.373) and Polyan (2070 +/- 60 MPa, P =.577) exhibited flexural modulus similar to the PMMA material. The tested denture base materials fulfilled the requirements regarding flexural strength (>65 MPa). With the exception of Sinomer, the tested denture base resins passed the requirements of ISO 1567 regarding flexural modulus (>2000 MPa). CONCLUSION: Flexural modulus of Promysan was significantly higher than the PMMA material. Microbase and Sinomer exhibited significantly lower flexural strength and flexural modulus, respectively, than PMMA. The other groups did not differ significantly from the control group.

Acrylic Resins↗

Effect of artificial tooth material on mandibular residual ridge resorption.

PURPOSE: In this 10-year longitudinal study we evaluated the amount of mandibular residual ridge resorption for 2 groups of subjects with complete dentures, one group with porcelain artificial teeth and the other with acrylic resin teeth. METHODS: One hundred and nine patients who had undergone ridge extension procedures with skin graft and prosthetic rehabilitation with porcelain or acrylic resin teeth were investigated for mandibular bone loss. Measurements were made on serial cephalograms. RESULTS: There were no significant differences between the groups in terms of their baseline characteristics (age, period of edentulousness, period of observation, vertical facial morphology, sex, severity of atrophy or presence of bruxism). Similarly, there were no statistically significant differences in amount of bone loss in relation to baseline characteristics. CONCLUSION: The view that acrylic resin teeth should be preferred to prevent bone resorption of the mandibular residual ridge is not supported by these data. Further research concerning soft denture-lining material should be undertaken to elucidate the potential role of denture pressure in ridge resorption.

Acrylic Resins↗

Influence of thickness and location on the residual monomer content of denture base cured by three processing methods.

The influence of thickness and location on the residual monomer content of acrylic resin plates was examined when they were processed by three methods: a conventional method, fluid resin technique, and a microwave curing method. The residual monomer contents were measured by gas liquid chromatography. The levels of residual monomer were influenced by the processing methods and thicknesses of acrylic resin specimens, but not by location within the specimens. These results suggest that dimensional accuracy and stability of acrylic resin dentures could be influenced by the processing method, the thickness of the bases, and the shape and size of the dentures.

Acrylic Resins↗

[Stability of screw fixation following sagittal splitting osteotomy of the mandibular ramus].

Recently, sagittal splitting osteotomy of the mandibular ramus is frequently performed in orthognathic surgeries of mandibular deformities. Although the surgical technique has been established. Methods for osteosynthesis following sagittal spitting of mandibular ramus still remain unestablished. Osteosynthesis is usually achieved by circumferencial wiring, interosseous wiring or screw fixation. It is unknown which of these three methods is best suited from dynamic and clinical point of view. The author carried out a simulation study of screw fixation using acrylic resin plate models and sagittally split air-dried human mandibles. The following result were obtained: 1) In the fixation experiment using an acrylic resin plate and AO cortical bone screws, a significantly smaller displacement was recorded by S3E type fixation, compared with other modes of fixation. In determining the amount of stress required for causing displacement, S3D type fixation required a significantly larger stress, compared with other modes of fixation. 2) In the destruction experiment using an acrylic resin plate and AO cortical bone screws, the critical displacement measured was significantly smaller by S3E type fixation compared with other modes of fixation S3C type fixation required a significantly larger amount of stress to cause destruction. 3) In the fixation experiment using the air-dried human mandibles and alumina ceramic screws, a significantly smaller displacement was recorded by 2-alumina ceramic screw fixation, compared with other modes of fixation. In determining the amount of stress required for causing displacement, 3-alumina ceramic screw fixation required a larger stress, compared with other modes of fixation. 4) In the fixation experiment using the air-dried human mandible and AO cortical bone screws, a significantly smaller displacement was recorded by 2-AO cortical bone screw fixation, compared with other modes of fixation. In determining the amount of stress required for causing displacement, 3-AO cortical bone screw fixation required a larger stress, compared with the 2-AO type of fixation. The above experimental results suggest that when the sagittally split proximal cortical plate retains enough thickness for tapping, clinical application of screw fixation either with alumina ceramic or AO cortical bone screws produces an adequately high anti-displacement effect, even if only 2 screws are used. However, when stability is evaluated in terms of the resistance to stress, 3-screw fixation is considered to amply satisfy the resistance required.

Acrylic Resins↗

Influence of curing method, sealer, and water storage on the hardness of a soft lining material over time.

PURPOSE: The purpose of this study was to determine the hardness of plasticized acrylic resin soft lining materials over time when curing procedures were modified and when surface sealers were either used or omitted. MATERIALS AND METHODS: A chairside plasticized acrylic resin material and a heat processed plasticized resin material were made into disks 40 mm in diameter and 10 mm in thickness. Materials were cured by processing at an elevated temperature or at mouth temperature. Five samples were used with each processing method. Half of all samples were treated with a surface sealer, whereas the other samples received no surface treatment. After processing, the samples were immersed in 37 degrees C water for a total time of 1 year. Specimens were tested to determine hardness on a monthly basis. Testing was accomplished using a Shore A durometer. RESULTS: Hardness testing showed differences relative to material and to time after processing. The heat-processed plasticized resin material showed significantly higher Shore A hardness values than the chairside over the entire experimental period (p <.01). Increased hardness was seen for all materials over time, but this was more pronounced with plasticized acrylic resin in which the hardness increased from 28.4% to 115.8% depending on processing method and surface treatment. Surface treatment showed significant softening only when the samples were cured at simulated mouth temperature (p <.05). CONCLUSIONS: Processing method and time after processing have an effect on surface hardness of the tested materials, but neither of these effects is as profound as the initial choice of material. J Prosthodont 2001;10:42-45.

Acrylic Resins↗

Effectiveness of porcelain repair systems.

The study indicates that the repair system using a bonding agent with acrylic resin is significantly stronger than the repair system using a specific composite resin. On the basis of this study, the acrylic resin repair system has the best potential for clinical success in porcelain-to-porcelain repairs.

Acrylic Resins↗

Ocular prosthetics: use of a tissue conditioner material to modify a stock ocular prosthesis.

The custom-made ocular prosthesis contributes to enhanced tissue health of the anophthalmic socket. For this purpose, an acrylic resin ocular prosthesis may be modified, by using an appropriate dental impression material and being adapted closely to the anophthalmic socket. The modeling impression material is subsequently replaced by acrylic resin. This article describes the application of a viscoelastic tissue conditioner material, as an impression medium for prosthetic modification of an ocular prosthesis. The tissue conditioner material exhibits favorable tissue compatibility, adhesion to acrylic resin, and detailed surface registration. These advantages facilitate the clinical procedure and evaluation of modifications made to the ocular prosthesis.

Acrylic Resins↗

Effect of cooling procedure on final denture base adaptation.

Well-fitted dentures prevent hyperplasic lesions, provide chewing efficiency and promote patient's comfort. Several factors may affect final adaptation of dentures, as the type of the acrylic resin, the flask cooling procedure and the water uptake. This investigation evaluated the effect of water storage and two different cooling procedures [bench cooling (BC) for 2 h; running water (RW) at 20 degrees C for 45 min] on the final adaptation of denture bases. A heat-cured acrylic resin (CL, Clássico, Clássico Artigos Odontológicos) and two microwave-cured acrylic resins [Acron MC, (AC) GC Dent. Ind. Corp.; Onda Cryl (OC), Clássico Artigos Odontológicos] were used to make the bases. Adaptation was assessed by measuring the weight of an intervening layer of silicone impression material between the base and the master die. Data was submitted to ANOVA and Tukey's test (0.05). The following means were found: (BC) CL=0.72 +/- 0.03 a; AC=0.70 +/- 0.03 b; OC=0.76 +/- 0.04 c//(RW) CL= 1.00 +/- 0.11 a; AC=1.00 +/- 0.12 a; OC=0.95 +/- 0.10 a. Different labels join groups that are not statistically different (P > 0.05). Comparisons are made among groups submitted to the same cooling procedure (BC or RW). The conclusions are: interaction of type of material and cooling procedure had a statistically significant effect on the final adaptation of the denture bases (P < 0.05); water storage was not detected as a source of variance (P > 0.05) on the final adaptation.

Acrylic Resins↗

The stability of temporary prosthetic base materials. II: Water sorption and its effects.

The bases of occlusal rims and trial dentures may sorb water during disinfection procedures, adjustment in the mouth and rinsing and cooling under running water. Such sorped water may adversely affect the properties of the baseplate materials. The room temperature water sorption of sheets of grey and pink shellac and cold cure acrylic resin was determined over 10 weeks by weighing. The Wallace surface hardness, linear dimension and transverse strength were also measured each week. Specimens were reweighed each week as they dried at room temperature. At the conclusion of the tests, the materials showed a change after soaking in weight, hardness, linear dimension and transverse strength, and change after drying relative to original mass for grey shellac of +1.5%, -48%, +0.7%, -58%, +0.33%; for pink shellac of +2.0%, -56%, +0.9%, -65%, +0.4%; and for acrylic resin of +1.2%, +10%, +0.4%, -30%, -2.1% respectively. The acrylic resin material was thus less affected by water sorption than the grey and pink shellac materials.

Acrylic Resins↗