SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Porphyria is a diverse group of diseases in which the biosynthesis of heme is disrupted by either genetic defects or environmental factors. This review gives an overview of the different types of porphyria and describes possible causes, clinical signs, diagnosis and therapy. In addition, the oral manifestations of porphyria and the potential implications of the disease for dental management are discussed.
OBJECTIVE: To assess the effect of a calcium carbonate/perlite toothpaste on the levels of extrinsic stain removed at two weeks compared to a silica control toothpaste. DESIGN: In this parallel group, double-blind study, subjects were stratified by natural baseline stain and tobacco use and allocated at random to one of the two study toothpastes. Subjects brushed with their allocated toothpaste twice daily for two weeks before extrinsic tooth stain was again assessed. SETTING: The study was performed at 4-Front Research UK Limited, Maldon, UK. PARTICIPANTS: 152 adult subjects with at least eight assessable incisors/ canines with natural extrinsic tooth stain completed the study. METHODS: The extrinsic tooth stain on the facial surfaces of incisors and canines was measured using the Macpherson modification of the Lobene Stain Index. RESULTS: Both of the toothpaste groups had significantly less stain after two weeks of use compared to the baseline value (p<0.001). Analysis of covariance on the sum of the whole mouth stain scores showed that the calcium carbonate/perlite toothpaste removed significantly more stain over the two week study than the silica control toothpaste (p<0.05). CONCLUSIONS: Twice daily brushing for two weeks with a calcium carbonate/perlite toothpaste removes more extrinsic stain than a silica control toothpaste.
OBJECTIVES: To determine the enamel and dentine wear of two whitening toothpastes using an in situ model with ex vivo brushing. METHODS: Human enamel/dentine (approximately 50:50) blocks (approximately 4 x 4mm) were placed in the upper buccal aspects of full or partial dentures of a group of 25 subjects. Subjects brushed the specimens ex vivo with either a calcium carbonate/perlite or silica containing whitening toothpaste under exaggerated conditions as compared to normal for 30 s, twice per day. Specimens were removed after 4, 8 and 12 weeks and the wear to the enamel and dentine was determined. Enamel wear was determined by change in Knoop indent length and dentine wear was determined from the enamel-dentine step height, measured using optical profilometry. RESULTS: The mean wear after 12 weeks was for enamel 0.27 and 0.19 microns, and for dentine 34.3 and 61.1 microns, for the calcium carbonate/perlite and silica toothpastes respectively. There were no significant differences between products after 12 weeks. The rate of wear was found to decrease throughout the duration of the study. CONCLUSION: There were no significant differences between the two whitening toothpastes in terms of enamel and dentine wear after 12 weeks brushing.
There has been an increase in the demand from consumers and patients for products that whiten teeth. To meet this demand, a whitening toothpaste containing calcium carbonate and perlite as the abrasive system and an efficacious fluoride source has recently been launched. The aim of the current paper is to review the toothpaste's stain removal efficacy and its effects on enamel and dentine wear. It has been shown to be effective at removing model extrinsic stain in vitro. Further, it has been shown to be more effective in removing naturally occurring extrinsic tooth stain than a silica non-whitening control toothpaste after two weeks of twice daily brushing in a parallel group, double-blind clinical study using 152 adult volunteers. In addition, the enhanced whitening effect did not give a clinically relevant level of wear to enamel or a significant increase in dentine wear compared to marketed non-whitening toothpaste formulations, as shown by using an in situ type model with ex vivo brushing.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The aim of this project was to determine the effectiveness of sterilisation methods for dental enamel for use in intra-oral cariogenicity tests, and their possible effect on the degree of demineralisation of enamel. Bovine incisors were cut vertically into five portions and each assigned to one of five groups. Group 1 was used as a control while the other four groups were subjected, respectively, to gamma irradiation ( congruent with 25kGy), steam autoclaving (121 degrees C for 15 min), sodium hypochlorite (12% w/v for 24h) and povidone-iodine (7.5% w/v for 24h). Total viable counts of microorganisms remaining following sterilisation of the specimens were performed following incubation of the specimens for 24h at 37 degrees C. Caries-like lesions were produced in each specimen using an acidic buffer solution (pH4.5). Sections were cut from each specimen, ground to 80-microgram thickness, and microradiographed. Mineral loss and lesion depth were quantified using transverse microradiography. Statistical analysis was by ANOVA. Dunnett's and Tukey's tests. Microbial growth (Staphylococcus aureus and bacilli) was observed only in control specimens in both brain heart infusion broth and on blood agar plates. The sterilisation methods affected the enamel surface as follows: gamma irradiation (cream discolouration), NaOCl (bleaching), and povidone-iodine (white spot-like lesion). Compared with the control, there was no significant difference in mineral loss and lesion depth with any of the groups, but the numerical values of mineral loss and lesion depth in groups can be ranked as follows: gamma irradiation <povidone-iodine <control <autoclave <NaOCl. In conclusion, the four sterilisation methods were all effective to sterilise enamel, but gamma irradiation proved the most acceptable method for enamel to be used in cariogenicity tests having the least adverse effect.
This study compared a laser fluorescence (LF) system (DIAGNOdent) with a visual caries scoring system for in vivo detection and diagnosis of occlusal caries under the conditions of an epidemiological study, in 132 mandibular and 38 maxillary first permanent molars in 170 children (mean age: 6.85 +/- 0.58 years). The teeth were cleaned and occlusal caries status in a selected investigation site recorded using both visual and LF systems. The LF readings were interpreted both according to the cut-off points recommended by the manufacturers and those based on laboratory research with histological validation. The percentage agreement of the LF and visual scoring system was better using the cut-off limits recommended by the manufacturer. Histological validation was not possible in this clinical study, but it appeared that either the LF method was overscoring some lesions or the visual method was underscoring them. Since the LF instrument cannot be expected to differentiate caries from hypomineralisation, it should probably be used as an adjunct to a clinical examination.
The aims of this in vitro study were to compare the combination of FOTI and visual inspection to other diagnostic methods for the detection and evaluation of the depth of occlusal caries and assess the effect of stain on diagnostic performance. Five diagnostic methods (combined FOTI/Visual (CFV), Visual, FOTI, DIAGNOdent and Electrical Caries Monitor) were considered. Histological validation was performed in the 152 occlusal molar sites (111 teeth) using 350-microm sections and a stereomicroscope. The rank correlation coefficients with histology ranged from 0.42 (DIAGNOdent) to 0.66 (CFV). The area under the ROC curves (AUC) for enamel lesions ranged from 0.82 (ECM) to 0.88 (CFV) and from 0.81 (DIAGNOdent) to 0.91 (CFV) for dentine lesions. The AUC at the dentine level for CFV and FOTI were similar (p > 0.05), but the AUC for CFV was significantly greater than for visual (p < 0.001), DIAGNOdent (p = 0.005) and the ECM (p = 0.04). FOTI was found to be particularly useful for the detection of dentine lesions. The exclusion of stain and brown spot lesions improved performance for all methods. It is concluded that CFV is useful for the determination of occlusal lesion depth and that in the presence of stain and brown spot lesions different cut-off points may be required for the ECM and DIAGNOdent to identify dentine lesions.
The aim of this in vitro study was to assess the diagnostic performance of five methods of using the Electrical Caries Monitor (ECM) to detect caries lesions at enamel and dentine thresholds in occlusal molar surfaces with and without stain. Histological validation was performed in 152 occlusal sites in permanent molar teeth. For the sites without stain the areas under the ROC curve (AUC) for the five methods ranged from 0.69 to 0.93 (enamel) and 0.74 to 0.92 (dentine). For stained sites the AUC ranged from 0.59 to 0.65 (enamel) and 0.66 to 0.77 (dentine). The performance of the ECM was reduced in the presence of stain. The measurements using toothpaste as a conducting medium were generally worse than when direct measurements were taken. The profiles of the resistance curves generated as the tooth was dried for 5 s were used to derive additional summary variables. The AUC for all sites using an outcome variable generated from these data were 0.89 (enamel) and 0.91 (dentine), respectively, for all teeth. It is concluded that the performance of the ECM might be improved by either considering a combination of variables or using different resistance cut-offs in the presence or absence of stain.
The objective of this study was to determine the ability of several techniques to detect natural secondary caries adjacent to proximal class II amalgam restorations. Two sites were selected and marked on each of 50 human extracted posterior teeth. Three examiners visually characterized each site independently for signs of demineralization (VI), ditching presence (VD), and color change, and utilized light-induced fluorescence (QLF), and infrared laser fluorescence (LF) techniques. The teeth were sectioned through the selected sites, and the severity of each lesion was determined by confocal laser scanning microscopy (CLSM) as the 'gold standard'. Agreement among examiners was assessed using weighted kappa statistics and showed fair to moderate correlation with all techniques. Sensitivity, specificity, positive predictive value (PPV), negative predictive value and accuracy were determined by utilizing three arbitrary CLSM thresholds. Higher sensitivity was indicated by the QLF and LF than by VI. For PPV and accuracy, QLF and LF showed values higher or similar to VI. Low sensitivity was found for VD. The results obtained in this study suggest that LF and QLF may improve the ability to detect early secondary caries around amalgam restorations.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.