Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Films”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources
PubMed2005

Transport of organic solutes through amorphous teflon AF films.

Fluorous media have great potential for selective extraction (e.g., as applied to organic synthesis). Fluorous polymer films would have significant advantages in fluorous separations. Stable films of Teflon AF 2400 were cast from solution. Films appear defect-free (SEM; AFM). Rigid aromatic solutes are transported (from chloroform solution to chloroform receiving phase) in a size-dependent manner (log permeability is proportional to -0.0067 times critical volume). Benzene's permeability is about 2 orders of magnitude higher than in comparable gas-phase experiments. The films show selectivity for fluorinated solutes in comparison to the hydrogen-containing control. Transport rates are dependent on the solvent making up the source and receiving phases. The effect of solvent is, interestingly, not due to changes in partition ratio, but rather it is due to changes in the solute diffusion coefficient in the film. Solvents plasticize the films. A less volatile compound, -COOH-terminated poly(hexafluoropropylene oxide) (4), plasticizes the films (T(g) = -40 degrees C). Permeabilities are decreased in comparison to 4-free films apparently because of decreased diffusivity of solutes. The slope of dependence of log permeability on critical volume is not changed, however.

Benzene↗
PubMed2005

pH-responsive copolymer films by surface-catalyzed growth.

We have engineered a new class of pH-responsive polymer films on gold surfaces by first developing a controlled, surface-catalyzed polymerization to prepare a copolymer film consistent with poly(methylene-co-ethyl acetate) and subsequently hydrolyzing the ester side chains to varying extents to yield carboxylic acids (denoted as PM-CO2H). When pH is increased, the acid groups become deprotonated or charged, dramatically increasing their water solubility and greatly altering the film properties. The carboxylic acid content within the copolymer film can be adjusted by changing the monomer concentration ratio used in the polymerization process or the length of time for the hydrolysis. We have designed PM-CO2H films to consist predominately (>95%) of polymethylene (PM) so that the film is hydrophobic in the uncharged state and, thereby, exhibits an extremely large pH-induced response in barrier properties once ionized. The effect of polymer composition on pH response was investigated by electrochemical impedance spectroscopy (EIS), reflectance-absorption infrared spectroscopy (RAIRS), and contact angle measurements. At a 1%-4% molar acid content, the copolymer film exhibits a 5 orders of magnitude change in its resistance to ion transport over 2-3 pH units. The pH at which this response begins can be tailored from pH 5 to pH 10 by decreasing the acid content in the film from 4% to 1%.

Journal Article↗
PubMed2006

X-ray diffraction area mapping of preferred orientation and phase change in TiO2 thin films deposited by chemical vapor deposition.

This paper reports on an investigation into the formation of TiO(2) thin films, whereby X-ray diffraction is used to map systematic changes in preferred orientation and phase observed throughout the films. The key to this strategy is the recording of X-ray diffraction patterns of specific and isolated areas of a substrate, ensuring this specificity by the use of a small X-ray sample illumination area (approximately 3-5 mm(2)). A map of the variation in film composition can then be built up by recording such diffraction patterns at regular intervals over the whole substrate. Two titania films will be presented, grown using atmospheric pressure chemical vapor deposition, at 450 and 600 degrees C, from TiCl(4) and ethyl-acetate precursors. The film grown at 450 degrees C showed a systematic change in preferred orientation, while the film grown at 600 degrees C was composed of a mixture of the rutile and anatase phases of TiO(2) with the ratio of these phases altering with position on the substrate. The results of physical property measurements and electron microscopy carried out on the films are also reported, conducted at locations identified by the X-ray diffraction mapping procedure as having different compositions, and hence different physical responses. We found that the photocatalytic activity and hydrophobicity were dependent on the rutile:anatase ratio at any given location on the film.

Journal Article↗
PubMed2001

Lipid particle size effect on water vapor permeability and mechanical properties of whey protein/beeswax emulsion films.

Lipid particle size effects on water vapor permeability (WVP) and mechanical properties of whey protein isolate (WPI)/beeswax (BW) emulsion films were investigated. Emulsion films containing 20 and 60% BW (dry basis) and mean lipid particle sizes ranging from 0.5 to 2.0 microm were prepared. BW particle size effects on WVP and mechanical properties were observed only in films containing 60% BW. WVP of these films decreased as lipid particle size decreased. As drying temperature increased, film WVPs decreased significantly. Meanwhile, tensile strength and elongation increased as BW particle size decreased. However, for 20% BW emulsion films, properties were not affected by lipid particle size. Results suggest that increased protein-lipid interactions at the BW particle interfaces, as particle size decreased and resulting interfacial area increased, result in stronger films with lower WVPs. Observing this effect depends on a large lipid content within the protein matrix. At low lipid content, the effect of interactions at the protein-lipid interfaces is not observed, due to the presence of large protein-matrix regions of the film without lipid, which are not influenced by protein-lipid interactions.

Animals↗
PubMed2001

Evolution of wheat gliadins conformation during film formation: a fourier transform infrared study.

The secondary structures of wheat gliadins (a major storage protein fraction from gluten) in film-forming solutions and their evolution during film formation were investigated by Fourier transform infrared spectroscopy. In the film-forming solution, wheat gliadins presented a mixture of different secondary structures, with an important contribution of beta-turns induced by proline residues. The presence of plasticizer did not have any influence on protein secondary structure in the film-forming solution. The evolution of protein conformation was followed during drying; the major feature of this evolution was a clear growing of the infrared band at 1622 cm(-1), characteristic of intermolecular hydrogen-bonded beta-sheets. This revealed the formation of protein aggregates during film drying. The influence of the drying temperature on film properties and gliadin secondary structures was also investigated. Higher drying temperatures induced an increase of both the tensile strength of the films and the amount of beta-sheets aggregates. Although the appearance of heat-induced disulfide bridge cross-links has already been described, there is clear evidence that hydrogen-bonded beta-sheets aggregates are also induced by thermal treatment. It was not possible, however, to determine whether there is a direct relationship between the occurrence of these aggregates and the increase of the tensile strength of the films.

Gliadin↗
PubMed2003

Physicochemical properties and bioactivity of nisin-containing cross-linked hydroxypropylmethylcellulose films.

Cross-linked hydroxypropylmethylcellulose (HPMC) cast films with citric acid as polycarboxylic cross-linker were elaborated to study the effect of cross-linking level on various properties. Increased amounts of cross-linking agent were not connected to statistically different tensile strength and Young's modulus. Whatever the cross-linking level of the film was, the ultimate elongation parameter decreased by approximately 60% compared to the HMPC control film. Moisture sorption isotherms and water contact angle meter showed that the effect of cross-linking degree tends to reduce the hygroscopic and hydrophilic characteristics of films. In addition, to control bacteria growth on food surfaces, the antimicrobial activity of both 98% cross-linked HPMC-nisin and control HPMC-nisin films was tested on Micrococcus luteus. Despite the incorporation of a significant content of nisin, cross-linked HPMC-nisin films were completely inactive on the microbial strain compared to the HPMC-nisin control films. Cross-linking conditions likely either denatured the nisin or irreversibly bound nisin to the cross-linked HPMC. However, nisin adsorbed into films made from previously cross-linked HPMC maintained its activity.

Anti-Bacterial Agents↗
PubMed2003

Development and characterization of biodegradable films made from wheat gluten protein fractions.

Gliadins and glutenins were extracted from commercial wheat gluten on the basis of their extractability in ethanol and used to produce film-forming solutions. Films cast using these gliadin- and glutenin-rich solutions were characterized. Glycerol was used as a plasticizer, and its effect on the films was also studied. Films obtained from the glutenin fraction presented higher tensile strength values and lower elongation at break and water vapor permeability values than gliadin films. Gliadin films disintegrated when immersed in water. The GAB isotherm model was used to describe the equilibrium moisture sorption of the films. The glycerol concentration largely modified mechanical and water vapor barrier properties of both film types.

Chemical Phenomena↗
PubMed2004

Compositional and moisture content effects on the biodegradability of zein/ethylcellulose films.

The effect of moisture content and film composition on biodegradability is the focus of this study. Flexible films were first characterized for the effect on water sorption isotherms of relative humidity, temperature, zein content, and the addition of the plasticizers stearic acid, poly(ethylene glycol), or etoxylated ricine oil. Zein/ethylcellulose (EC) mixture films had a behavior between that for pure zein and EC films, which had the lowest water sorption. For films with plasticizer, the lowest water sorption at 25 degrees C was observed for those with stearic acid. Biodegradability of zein/EC films, evaluated using bacterial cultures selected for their zein proteolytic activity and isolated from a local solid waste landfill and a lagoon, showed no plasticizer effect even though its effect on moisture content was significant. Large differences were observed at different film zein concentration with the highest biodegradability for 100% zein. However, biodegradability did not mimic the water sorption behavior of zein/EC mixture films.

Biodegradation, Environmental↗
PubMed2006

Preparation and characterization of chitosan-based nanocomposite films with antimicrobial activity.

Four different types of chitosan-based nanocomposite films were prepared using a solvent-casting method by incorporation with four types of nanoparticles, that is, an unmodified montmorillonite (Na-MMT), an organically modified montmorillonite (Cloisite 30B), a Nano-silver, and a Ag-zeolite (Ag-Ion). X-ray diffraction patterns of the nanocomposite films indicated that a certain degree of intercalation was formed in the nanocomposite films, with the highest intercalation in the Na-MMT-incorporated films followed by films with Cloisite 30B and Ag-Ion. Scanning electron micrographs showed that in all of the nanocomposite films, except the Nano-silver-incorporated one, nanoparticles were dispersed homogeneously throughout the chitosan polymer matrix. Consequently, mechanical and barrier properties of chitosan films were affected through intercalation of nanoparticles, that is, tensile strength increased by 7-16%, whereas water vapor permeability decreased by 25-30% depending on the nanoparticle material tested. In addition, chitosan-based nanocomposite films, especially silver-containing ones, showed a promising range of antimicrobial activity.

Anti-Infective Agents↗
PubMed2006

Mechanical, barrier, and antimicrobial properties of apple puree edible films containing plant essential oils.

Edible films, as carriers of antimicrobial compounds, constitute an approach for incorporating plant essential oils (EOs) onto fresh-cut fruit surfaces. The effect against Escherichia coli O157:H7 of oregano, cinnamon, and lemongrass oils in apple puree film-forming solution (APFFS) and in an edible film made from the apple puree solution (APEF) was investigated along with the mechanical and physical properties of the films. Bactericidal activities of APFFS, expressed as BA50 values (BA50 values are defined as the percentage of antimicrobial that killed 50% of the bacteria under the test conditions) ranged from 0.019% for oregano oil to 0.094% for cinnamon oil. Oregano oil in the apple puree and in the film was highly effective against E. coli O157:H7. The data show that (a) the order of antimicrobial activities was oregano oil > lemongrass oil > cinnamon oil and (b) addition of the essential oils into film-forming solution decreased water vapor permeability and increased oxygen permeability, but did not significantly alter the tensile properties of the films. These results show that plant-derived essential oils can be used to prepare apple-based antimicrobial edible films for various food applications.

Anti-Bacterial Agents↗
PubMed2005

Improved controllability of opal film growth using capillaries for the deposition process.

A capillary deposition method for the preparation of opal and inverse opal films has been developed. By this method, one can control the film thickness and the crack arrangement in opal as well as inverse opal structures. This method combines tube capillarity with cell capillarity or with gravity depending on the stability of the suspensions. The combination of tube capillarity with cell capillarity is used to prepare opal films from stable suspensions. The tube capillary transports the suspension, while the cell capillary helps to assemble the spheres. The setup defines the drying fronts, thickness, and crack arrangements of the opal films. The combination of capillarity with gravity is useful for making opal films from unstable suspensions. Opal films of spheres with size up to 1 mum can be easily prepared from this combination. Here, the gravity influences the arrangement of the spheres. The two-capillary setup has also been used to infiltrate the opal films with a titania precursor. After calcination, inverse titania opal films with skeleton structure have been obtained.

Journal Article↗
PubMed2006

Fabrication of electroactive layer-by-layer films of myoglobin with gold nanoparticles of different sizes.

Alternate adsorption of oppositely charged myoglobin (Mb) and gold nanoparticles with different sizes were used to assemble {Au/Mb}n layer-by-layer films on solid surfaces by electrostatic interaction between them. The direct electrochemistry of Mb was realized in {Au/Mb}n films at pyrolytic graphite (PG) electrodes, showing a pair of well-defined, nearly reversible cyclic voltammetry (CV) peaks for the Mb heme FeIII/FeII redox couple. Quartz crystal microbalance (QCM), electrochemical impedance spectroscopy (EIS), and CV were used to monitor or confirm the growth of the films. Compared with other Mb layer-by-layer films with nonconductive nanoparticles or polyions, {Au/Mb}n films showed much improved properties, such as smaller electron-transfer resistance (Rct) measured by EIS with Fe(CN)3-/4- redox probe, higher maximum surface concentration of electroactive Mb (Gamma*max), and better electrocatalytic activity toward reduction of O2 and H2O2, mainly because of the good conductivity of Au nanoparticles. Because of the high biocompatibility of Au nanoparticles, adsorbed Mb in the films retained its near native structure and biocatalytic activity. The size effect of Au nanoparticles on the electrochemical and electrocatalytic activity of Mb in {Au/Mb}n films was investigated, demonstrating that the {Au/Mb}n films assembled with smaller-sized Au nanoparticles have smaller Rct, higher Gamma*max, and better biocatalytic reactivity than those with larger size.

Adsorption↗
PubMed2006

Optical and physical properties of cobalt oxide films electrogenerated in bicarbonate aqueous media.

For the first time, cobalt oxide films that are highly protective against localized corrosion and depicting a wide variety of bright and uniform colors due to light interference, have been successfully electrogenerated on polycrystalline cobalt disk electrodes under potentiostatic polarization in a mild aqueous bicarbonate medium. Open circuit potential measurements have shown the formation of a film with a bilayered structure, organized as a thin Co3O4 outer layer and a thick CoO inner layer. The existence of Co3O4 as a thin outer layer, previously postulated from galvanostatic reduction experiments, has been confirmed from XPS analysis. Raman spectroscopy, performed using a very low laser intensity, has shown that the films are mainly composed of CoO. The broadness of the Raman bands observed is associated to the amorphous character of the film, a result that has been confirmed by spectroscopic ellipsometry and X-ray diffraction analysis. Overall film thicknesses, well controlled by the anodization duration, were determined and correlated using mechanical (atomic force microscopy and profilometry) and spectroscopic (specular UV-vis-NIR reflectance and ellipsometry) techniques. Spectroscopic ellipsometry, using a simple amorphous dispersion model, has proved efficient for measuring thicknesses of films ranging from 31 to 290 nm with very low standard deviations. The real part of the complex refractive indices of these films, ranging from 1.8 to 2.2 (at lambda = 632.8 nm) depending on the anodization duration, is in good agreement with values reported in the literature for CoO. The film with the highest refractive index, and consequently the more densely packed structure, was obtained following a 30-minute anodization period.

Bicarbonates↗
PubMed2006

Evaporation of water and uptake of HCl and HBr through hexanol films at the surface of supercooled sulfuric acid.

Vacuum evaporation and molecular beam scattering experiments have been used to monitor the loss of water and dissolution of HCl and HBr in deuterated sulfuric acid at 213 K containing 0 to 100 mM hexanol. The addition of 1-hexanol to the acid creates a surface film of hexyl species. This film becomes more compact with decreasing acidity, ranging from approximately 62% to approximately 68% of maximum packing on 68 to 56 wt % D(2)SO(4), respectively. D(2)O evaporation from 68 wt % acid remains unaltered by the hexyl film, where it is most porous, but is impeded by approximately 20% from 56 and 60 wt % acid. H --> D exchange experiments further indicate that the hexyl film on 68 wt % acid enhances conversion of HCl and HBr into DCl and DBr, which is interpreted as an increase in HCl and HBr entry into the bulk acid. For this permeable hexyl film, the hydroxyl groups of surface hexanol molecules may assist uptake by providing extra sites for HCl and HBr hydrogen bonding and dissociation. In contrast, HCl --> DCl exchange in 60 wt % D(2)SO(4) at first rises with hexyl surface coverage but then drops back to the bare acid value as the hexyl species pack more tightly. HCl entry is actually diminished by the hexyl film on 56 wt % acid, where the film is most compact. These experiments reveal a transition from a porous hexanol film on 68 wt % sulfuric acid that enhances HCl and HBr uptake to one on 56 wt % acid that slightly impedes HCl and D(2)O transport.

Journal Article↗
PubMed2006

Diffusion of HDO in pure and acid-doped ice films.

In these experiments, a few bilayers of D(2)O were vapor-deposited on a pure crystalline H(2)O ice film or an ice film doped with a small amount of HCl. Upon deposition, H/D isotopic exchange quickly converted the D(2)O layer into an HDO-rich mixture layer. Infrared absorption spectroscopy followed the changes of the HDO from the initial HDO mixture layer to HDO isolated in the H(2)O ice film. This was possible because isolated HDO in H(2)O ice has a unique, sharp peak in the O-D stretch region that can be distinguished from the broad peak due to the initial HDO mixture layer. The absorbance of isolated HDO displayed first-order kinetics and was attributed to diffusion of HDO from the HDO-rich mixture layer into the underlying H(2)O ice film. While negligible diffusion was observed for pure ice films and for ice films with HCl concentrations up to 1 x 10(-4) mole fraction, diffusion of HDO occurred for higher concentrations of (2-20) x 10(-4) mole fraction HCl with a concentration-independent rate constant. The diffusion under these conditions followed Arrhenius behavior for T = 135-145 K yielding E(a) = 25 +/- 5 kJ/mol. The mechanism for the HDO diffusion involves either (i) molecular self-diffusion or (ii) long-range H/D diffusion by a series of multiple proton hop and orientational turn steps. While these spectroscopic results compare favorably with recent studies of molecular self-diffusion in low-temperature ice films, the diffusion results from all the ice film studies at low temperatures (ca. T < 170 K) differ from earlier bulk ice studies at higher temperatures (ca. T > 220 K). A comparison and discussion of the various diffusion studies are included in this report.

Journal Article↗
PubMed2006

Room-temperature preparation of nanocrystalline TiO2 films and the influence of surface properties on dye-sensitized solar energy conversion.

An extremely easy method is presented for producing surfactant-free films of nanocrystalline TiO2 at room temperature with excellent mechanical stability when deposited on glass or plastic electrodes for dye-sensitized solar energy conversion. Prolonged magnetic stirring of commercial TiO2 nanoparticles (Degussa P25) in either ethanol or water results in highly homogeneous dispersions which are used to prepare TiO2 films with surface properties which depend on the solvent used for dispersing the particles, even after sintering. The optical and mechanical properties of films cast from ethanol and water dispersions are compared, and differences in the extent of surface defects and dye binding are observed. Optical absorption, photoluminescence, and resonance Raman spectra of TiO2 films sensitized with Ru(4,4'-dicarboxylic acid-2,2'-bipyridine)2(NCS)2 ("N3") reveal that the electronic coupling of the dye and semiconductor depends on the surface structure of the film which varies with film preparation. Current-voltage data for illuminated and dark dye-sensitized solar cells are obtained as a function of film preparation, and results are compared to spectroscopic data in order to interpret the microscopic basis for variations in solar cell performance, especially with regard to sintered versus unsintered TiO2 films. The results suggest that surface traps associated with oxygen vacancies play a critical role in determining the efficiency of dye-sensitized solar energy conversion through their influence on the binding and electronic coupling of the dye to the semiconductor.

Journal Article↗
PubMed2006

Electrospray deposition, model, and experiment: toward general control of film morphology.

Poly(vinylidene fluoride) film formation with electrospray deposition has been studied with support of a droplet evaporation model. The input parameters of the model consist basically of the solvent, the solute concentration, the flow rate, and the solution conductivity. The model provides the droplet size, the solute concentration, the droplet velocity, and the shear stress of the droplet at impact as a function of the distance between the nozzle and the substrate. With some additional experimental information such as the size change of the film with spray distance and the viscosity of the solution, the growth rate of the film and the shear rate of the droplet at impact can be determined. Growth rate is shown to define distinct regimes of film formation. In those regimes, only a single factor or a limited number of factors controls the film morphology. The most important factors include the shear rate and the surface energy. It is found that at a specific range of growth rates only the shear rate determines the morphology of the polymer film. Growth rate, as the defining quantity of film morphology, is not limited to polymer solutions. Therefore, the growth rate, in combination with the control factors mentioned above, functions as a general framework through which understanding and control of film formation with electrospray deposition can be improved.

Journal Article↗
PubMed2004

Preparation of nanosized ZnS-passivated CdS particle films via the MOCVD process with co-fed single source precursors.

A novel approach was developed to prepare thin films of nanosized ZnS-passivated CdS particles via a metal-organic chemical vapor deposition (MOCVD) process with co-fed single source precursors of CdS and ZnS. Single source precursors of CdS and ZnS with sufficiently different reactivity, as judged from thermogravimetry analysis, were prepared and paired up to form ZnS-passivated CdS, (CdS)ZnS, and CdS-modified ZnS, (ZnS)CdS, particle films in a one-step process. For comparison purposes, sequential layer growth of CdS/ZnS and ZnS/CdS particle films was also conducted, and single compound particle films were prepared. These films were characterized with absorption spectrometry, photoluminescence spectroscopy, scanning electron microscopy, and powder X-ray diffraction spectra. The photoluminescence efficiency of the resulting composite particle film of ZnS-passivated CdS was significantly enhanced as compared to that of the plain CdS film, due to the effective passivation of surface electronic states of CdS by ZnS, a material with a higher conduction band than that of CdS. As for particle films of CdS-modified ZnS, a decay in photoluminescence efficiency was observed. The enhancement or decay in photoluminescence efficiency was much more pronounced for the passivated and modified system than for the sequential layer system, proportional to the interfacial area between the CdS and ZnS phases.

Cadmium Compounds↗