Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Environmental Protection Agency”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources

The EPA National Fuels Surveillance Network. I. Trace constituents in gasoline and commercial gasoline fuel additives.

A National Fuels Surveillance Network has been established to collect gasoline and other fuels through the 10 regional offices of the Environmental Protection Agency. Physical, chemical, and trace element analytical determinations are made on the collected fuel samples to detect components which may present an air pollution hazard or poison exhaust catalytic control devices. A summary of trace elemental constituents in over 50 gasoline samples and 18 commercially marketed consumer purchased gasoline additives is presented. Quantities of Mn, Ni, Cr, Zn, Cu, Fe, Sb, B, Mg, Pb, and S were found in most regular and premium gasoline. Environmental implications of trace constituents in gasoline are discussed.

Air Pollutants↗

Application of clearance concepts to the assessment of exposure to lead in drinking water.

This paper explores the application of clearance concepts to environmental toxicology. Lead, for which a clearance of about 0.5 ml/min is estimated from published data, is chosen as an example. An index for the contribution of drinking water to total exposure is developed using these concepts. For lead, this index is shown to increase with the concentration of the metal in water; it is higher for children than for adults. At the maximum contaminant level (MCL) of 10 micrograms/L proposed by the US Environmental Protection Agency (EPA), the average contribution from lead in drinking water is estimated to be 7 percent. The contribution in children is about twice as great. At and above the current MCL of 50 micrograms/L, drinking water becomes a major source of lead exposure.

Adult↗

Pesticides and food safety.

This report reviews recent developments regarding the environmental, toxicological, and regulatory issues surrounding pesticide residues in food. Factors affecting the establishment of regulatory limits are discussed. Pesticides monitored by state and federal agencies are compiled and the need for improvements in analytical techniques and enforcement procedures in governmental monitoring programs is pointed out. Specific incidents of concern related to pesticides in food including EDB in grain and grain products, aldicarb in watermelon, demeton-methyl in wine, DDT in fish, S,S,S-tributylphosphorotrithioate in chili peppers, and daminozide in apples and processed apple products are described. The National Academy of Science's study on the Environmental Protection Agency's (EPA) method for setting tolerances for pesticide residues is discussed, especially the dietary cancer risk estimates from pesticides and the inconsistencies in regulating oncogenic pesticides in raw and processed foods existing under the Delaney Clause. The EPA's Tolerance Assessment System is identified to improve the quality of the tolerance establishment process. New California laws to ensure food safety include mandated activities in identifying the toxicological data gaps for pesticides and evaluating pesticide tolerances. Already initiated, tighter regulatory activities at both the federal and the state levels are expected to improve scientific information development, regulatory decisions, and public health protection.

Food Analysis↗

Number of animals for sequential testing.

US regulatory agencies have used six animals in eye irritation tests. Analyses of eye irritation tests on pesticides (n = 48), consumer products and cosmetics (n = 53), Marzulli and Ruggles database (n = 139), and cleaning products and ingredients (n = 30) have greatly extended previous investigations of the merit of reducing animal sample size in the eye test. Given the existing scoring system for positive animal responses (corneal opacity > or = 1, iritis > or = 1, conjunctival redness > or = 2 and conjunctival chemosis > or = 2), the accuracy of the classification systems currently used by these agencies was determined. The US Consumer Product Safety Commission, US Food and Drug Administration, and US Occupational Safety and Health Administration use a classification system by which a substance is designated as an irritant when at least four of six animals give a positive response. This decision rule leads to a very high accuracy of at least 99% with essentially no false positive and false negative judgments. In contrast, the system used by the US Environmental Protection Agency pesticide program, in which only one or more of six treated animals result in an irritant decision, has an accuracy of only 50-80% with very high false positive rates. Analyses indicated that test sample size could be reduced to three and still preserve very good accuracy, whereas two-animal and one-animal tests did not give satisfactory responses. A two-stage test, in which two animals are tested and evaluated in the first stage before the need for testing one more animal in the second stage is determined, also demonstrated good operating characteristics. Both the one-stage/three-animal test and the two-stage test deserve consideration.

Animals↗

Variability of environmental exposures to volatile organic compounds.

Although studies of occupational exposure to volatile organic compounds (VOCs) often partition variability across groups, and between and within persons, those of environmental exposure to VOCs have not involved such partitioning. Using data from the Environmental Protection Agency's total exposure assessment methodology (TEAM) studies, we partitioned exposure variability across cities, and between and within persons for nine VOCs. The estimated variance components decreased in the order: within-person > between-person > across city. Despite their smaller magnitudes, estimates of between-person and across-city variance components were sufficiently large to provide reasonable contrast for informative epidemiology studies of most VOCs. Estimates of between-person variance components for environmental VOCs were similar to those published for occupational VOCs (groups defined by job and factory). However, estimates of within-person variance components were much greater for environmental VOCs, probably due to the greater diversity of locations (including the workplace) visited by the general public over time. For benzene and perchloroethylene, we used a simple model to calculate numbers of personal measurements required to relate the exposure level to health outcome statistically. About 10 times more personal measurements would be required to investigate perchloroethylene exposure as compared to benzene exposure; this disparity reflects the greater within-subject variability of perchloroethylene data compared to benzene data. We conclude that variability should be partitioned for environmental VOC exposures in much the same manner as for occupational exposures. There should be sufficient variability in the levels of most VOCs across cities and between subjects to provide reasonable contrast for informative epidemiology studies, as we illustrate for exposures to benzene. Yet, epidemiologists should be wary of investigating environmental VOCs without preliminary data with which to estimate the variance structure of exposure variables.

Air Pollutants↗

Case report: subcutaneous elemental mercury injection--clinical observations and implications for tissue disposal from the histopathology laboratory.

A 31-yr-old man presented to his general physician complaining of pain and swelling in the soft tissue of both hips. He initially denied knowledge of the etiology, but after elemental mercury droplets were expressed from the skin wounds by manual manipulation, he admitted that the source was self-administered sc injections. He did not provide a reason for this or give the time-frame of the injections. The areas of skin discoloration and soft tissue induration were completely excised and the wounds healed uneventfully. Blood levels of mercury declined gradually after excision. Examination of the resected skin and subcutis revealed subcutaneous abscesses containing droplets of elemental mercury, released easily when the abscesses were sectioned. Sections showed dark droplets of metallic mercury associated with necrosis and microabscess formation, with areas of foreign body giant cell reaction. Disposal of the residual tissues and mercury by incineration would release the volatile elemental mercury into the atmosphere, where it would subsequently be returned to earth in rain water, be converted to methyl mercury by microorganisms, and enter the food chain. The US Environmental Protection Agency has recommended caution in consuming foods containing methyl mercury and has provided guidelines for consuming foods believed to contain increased amounts of mercury. Mercury is readily available in the United States by over-the-counter sales to consumers, and in some cultures elemental mercury is used in ritualistic practices. Skin injection cases are infrequent, but histopathology laboratories should recognize this phenomenon and be prepared to dispose of Hg-contaminated tissues in an environmentally sound manner.

Abscess↗

Information activities in support of the EPA pesticide program.

The Environmental Protection Agency (EPA) is responsible for regulating the supply and use of pesticides. The EPA Office of Pesticide Programs (OPP) is involved in (1) supply control via product registration, (2) use control, (3) monitoring and hazard evaluation, and (4) research and economic studies. Major information activities in support of these four activities are reviewed.

Documentation↗

Ultrasonic extraction and portable anodic stripping voltammetric measurement of lead in paint, dust wipes, soil, and air: an interlaboratory evaluation.

Recent studies have demonstrated the utility of ultrasonic extraction (UE), followed by portable anodic stripping voltammetry (ASV), for the on-site determination of lead in environmental and industrial hygiene samples. The aim of this work was to conduct an interlaboratory evaluation of the UE-ASV procedure, with a goal of establishing estimates of method performance based on results from collaborative interlaboratory analysis. In this investigation, performance evaluation materials (PEMs) with characterized lead concentrations were used for interlaboratory testing of the UE-ASV procedure. The UE-ASV protocol examined has been promulgated in the form of two separate national voluntary consensus standards (one for UE and another for electroanalysis, which includes ASV). The PEMs consisted of characterized and homogenized paints, soils, and dusts (the last of which were spiked onto wipes meeting national voluntary consensus standard specifications), and air filter samples (mixed cellulose ester membrane) generated using characterized paints within an aerosol chamber. The lead concentrations within the PEMs were chosen so as to bracket pertinent action levels for lead in the various sample matrices. The interlaboratory evaluation was conducted so as to comply with an applicable national voluntary consensus standard that can be used to estimate the interlaboratory precision of a given analytical test method. Based on the analytical results reported by the participating laboratories, relative standard deviations (RSDs) for repeatability and reproducibility were computed for three different lead contents of the four PEMs. RSDs for repeatability were 0.019-0.100 for paints; 0.030-0.151 for soils; 0.085-0.134 for dust wipes; and 0.095-0.137 for air filters. RSDs for reproducibility were 0.127-0.213 for paints; 0.062-0.162 for soils; 0.085-0.134 for dust wipes; and 0.114-0.220 for air filters. With the exception of one of the air filter samples and one of the paint samples, the precision estimates were within the +/- 20% precision requirement specified in the US Environmental Protection Agency National Lead Laboratory Accreditation Program (NLLAP). The results of this investigation illustrate that the UE-ASV procedure is an effective method for the quantitative measurement of lead in the matrices evaluated in this study.

Air Pollution, Indoor↗

Gasoline-contaminated ground water as a source of residential benzene exposure: a case study.

In a private residence using gasoline-contaminated ground water (approximately 300 micrograms/l benzene), a series of experiments were performed to assess the potential benzene exposures that may occur in the shower stall, bathroom, master bedroom, and living room as a result of a single 20-min, shower. Integrated fixed site SUMMA TM-polished canister and Tenax GC air samples were collected in the target microenvironments over 20, 60, and 240 min. periods. These results were compared with the long-term personal Tenax GC samples (6 h) and grab samples collected with glass, gas-tight syringes at 0, 10, 18, 20, 25, 25.5, and 30 min. Maximum benzene concentrations occurred in the shower stall (758-1670 micrograms/m3) and bathroom (366-498 micrograms/m3) during and immediately after the shower. Inhalation exposures in the shower stall during the 20-min. shower were 2.1-4.9 times higher than corresponding 20-min, bathroom exposures. The total benzene dose resulting from the shower was estimated to be approximately 281 micrograms, with 40% via inhalation and 60% via the dermal pathway. This total is 2 to 3.5 times higher than the mean inhalation dose received during a concurrent 6 h occupation of the house. These results indicate that domestic use of gasoline-contaminated water can produce relatively high benzene exposures that vary significantly according to an individual's proximity to the water use zone. The information in this document has been funded wholly or in part by the U.S. Environmental Protection Agency. It has been subjected to Agency review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use. The entire experiment was reviewed and approved by the Research Triangle Institute Human Subjects Review Committee.

Air Pollution↗

The development and certification of Standard Reference Materials (SRMs) to assess and ensure accurate measurement of Pb in the environment.

The National Institute of Standards and Technology (NIST) has had a major quality-assurance role in the federal effort to reduce lead poisoning of children in the United States through its mission of ensuring the accuracy of chemical measurements. NIST certifies reference materials (standard reference materials--SRMs) that are used to benchmark measurements by secondary and field methods of analysis--to ensure that decisions of great health and economic impact are soundly based on good measurement science. Over the past 10 years, in cooperation with the US Environmental Protection Agency (EPA), US Department of Housing and Urban Development (HUD), and the United States Geological Survey (USGS), NIST has prepared and certified SRMs for lead content in soil, indoor dust, and paint. The role of these materials in meeting regulatory and abatement needs is described and their certified values are summarized.

Dust↗

What's driving Twin Cities air quality?

Air quality affects the health of patients, particularly those with asthma, COPD, cardiovascular disease, and other heart problems. Epidemiological studies show that common air pollution may have health effects in sensitive populations even when the air quality is within Environmental Protection Agency standards. In Minnesota, the main 2 pollutants of concern are ozone and fine particles. Emissions from motor vehicles are a major source of each. This article discusses these pollutants and reports on the work of the Minnesota Pollution Control Agency in measuring air quality and alerting the public about air-quality problems.

Air Pollutants↗

Exploratory analysis of population genetic assessment as a water quality indicator. II. Campostoma anomalum.

Biological monitoring programs to assess contaminant-induced impacts in aquatic systems are being developed and implemented by several federal agencies and many states. Genetic diversity and allozyme frequency may be valuable indicators of such impact because they are both sensitive to exposure and ecologically relevant in populations. The purpose of this study was to examine whether genetic diversity and structure of Campostoma anomalum populations could serve as effective biomarkers of exposure to anthropogenic stress by comparing genetic measures with other biological indicators of water quality. Fish were collected from 14 sites on seven streams by the Ohio Environmental Protection Agency as part of their stream water quality evaluation program. Values for the Index of Biological Integrity (IBI) and the Invertebrate Community Index (ICI) were determined for these 14 sites. Starch gel electrophoresis was used to collect genetic data for eight variable enzyme loci. Genetic diversity measures were not associated with site IBI or ICI values. However, the range of site IBI and ICI values was limited. Allele and genotype frequencies were significantly different at the point source compared to sites upstream and downstream indicating that genetic structure may be an indicator of water quality that is sensitive enough to detect change prior to species loss.

Acid Phosphatase↗

Chlorpyrifos (Dursban)-associated birth defects: report of four cases.

Extensive and unusual patterns of birth defects noted in four children included defects of the brain, eyes, ears, palate, teeth, heart, feet, nipples, and genitalia. Brain defects were present in the ventricles, corpus callosum, choroid plexus, and septum pellucidum, and genital defects included the testes (undescended), microphallus, and labia (fused). All children had growth retardation, and three had hypotonia and profound mental retardation. The children were exposed in utero to chlorpyrifos (Dursban). Published literature and unpublished documents by the U.S. Environmental Protection Agency contain reports that identify similarities in defects found in test animals and in children exposed to Dursban. A pattern of defects found in the four children in this study may represent a heretofore unrecognized syndrome that should be considered when Dursban-exposed women have children with birth defects.

Abnormalities, Drug-Induced↗

Air quality measurements from the Fresno Supersite.

The Fresno Supersite intends to 1) evaluate non-routine monitoring methods, establishing their comparability with existing methods and their applicability to air quality planning, exposure assessment, and health effects studies; 2) provide a better understanding of aerosol characteristics, behavior, and sources to assist regulatory agencies in developing standards and strategies that protect public health; and 3) support studies that evaluate relationships between aerosol properties, co-factors, and observed health end-points. Supersite observables include in-situ, continuous, short-duration measurements of 1) PM2.5, PM10, and coarse (PM10 minus PM2.5) mass; 2) PM2.5 SO4(-2), NO3-, carbon, light absorption, and light extinction; 3) numbers of particles in discrete size bins ranging from 0.01 to approximately 10 microns; 4) criteria pollutant gases (O3, CO, NOx); 5) reactive gases (NO2, NOy, HNO3, peroxyacetyl nitrate [PAN], NH3); and 6) single particle characterization by time-of-flight mass spectrometry. Field sampling and laboratory analysis are applied for gaseous and particulate organic compounds (light hydrocarbons, heavy hydrocarbons, carbonyls, polycyclic aromatic hydrocarbons [PAH], and other semi-volatiles), and PM2.5 mass, elements, ions, and carbon. Observables common to other Supersites are 1) daily PM2.5 24-hr average mass with Federal Reference Method (FRM) samplers; 2) continuous hourly and 5-min average PM2.5 and PM10 mass with beta attenuation monitors (BAM) and tapered element oscillating microbalances (TEOM); 3) PM2.5 chemical speciation with a U.S. Environmental Protection Agency (EPA) speciation monitor and protocol; 4) coarse particle mass by dichotomous sampler and difference between PM10 and PM2.5 BAM and TEOM measurements; 5) coarse particle chemical composition; and 6) high sensitivity and time resolution scalar and vector wind speed, wind direction, temperature, relative humidity, barometric pressure, and solar radiation. The Fresno Supersite is coordinated with health and toxicological studies that will use these data in establishing relationships with asthma, other respiratory disease, and cardiovascular changes in human and animal subjects.

Aerosols↗

[Measurement of airborne asbestos fibers on railroad rolling stock].

In February 1995 the Italian Railways Health Department set up a special study group in order to assess the effectiveness of the measures adopted against hazards due to the presence of asbestos in rolling stock currently in use on the rail network. The group set up specific procedures for sampling and analysis, on the basis of the criteria fixed for civil buildings in Ministerial Decree of 6/9/94, which was subsequently applied to rolling stock by Ministerial Decree of 26/10/95. In accordance with these procedures the study group carried out environmental studies via test runs programmed by the Railways Technical Departments, on trains made up of different types of vehicles. Insulated, completely or partially deinsulated and originally non-insulated vehicles were studied. Samples were analysed via scanning electron microscopy (SEM) with elementary dispersion X spectroscopy (EDXS) carried out by highly qualified public laboratories (ISPESL--National Institute for Prevention and Work Safety, ARPA--Regional Environmental Protection Agency, CRA--Veneto Region, University Departments). Altogether, from the start of the programme up to September 1998, 1464 samples in 170 test runs on 619 rolling stock vehicles were examined. These involved 83 locomotives, 83 electric rail-cars and 453 carriages. The results showed that in over 99% of the samples the fibre concentrations were below 2 fibres/litre, which is the value fixed by law for buildings and rail vehicles in order to qualify for effective decontamination status. Values exceeding 2 fibres/litre were found in only 4 vehicles, which were withdrawn or blocked for further checks. As a precaution, 18 vehicles where concentrations over 1 but less than 2 fibres/litre were found, were also blocked and their return to service has been postponed for further checks and analyses until the results show concentrations below 1 fibre/litre. Environmental analyses carried out up to the present indicate an overall situation comparable to that usually found in the general environmental without any asbestos dispersion sources. Surveillance and investigations are still under way in order to achieve the aims of the safety programme set up by the Italian Railways to ensure health and environmental protection.

Air Pollution, Indoor↗

Evaluation of two new arsenic field test kits capable of detecting arsenic water concentrations close to 10 microg/L.

Millions of people worldwide are exposed to arsenic-contaminated drinking water. Arsenic field test kits may offer a cost-effective approach for measuring these exposures in the field, although the accuracy of some kits used in the past has been poor. In this study, arsenic concentrations were measured in 136 water sources in western Nevada using two relatively new arsenic test kits and compared to laboratory measurements using atomic fluorescence spectroscopy (AFS). Spearman's rank correlation coefficients comparing the Quick Arsenic and Hach EZ kits to laboratory measurements were 0.96 (p < 0.001) and 0.95 (p < 0.001), respectively. When analyzed in seven exposure categories (0-9, 10-19, 20-49, 50-99, 100-199, 200-499, and > or = 500 microg/L), test kit and AFS measurements were in the same category in 71% (Quick Arsenic) and 62% (Hach EZ) of samples, and within one category of each other in 99% (Quick Arsenic) and 97% (Hach EZ) of samples. Both kits identified all water samples with high arsenic concentrations (> 15 microg/L) as being above the United States Environmental Protection Agency's drinking water standard and the World Health Organization's guideline value for arsenic of 10 microg/L. These results suggestthatthese easily portable kits can be used to identify water sources with high arsenic concentrations and may provide an important tool for arsenic surveillance and remediation programs.

Arsenic↗

Safety risk analysis of an innovative environmental technology.

The authors describe a decision and risk analysis performed for the cleanup of a large Department of Energy mixed-waste subsurface disposal area governed by the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). In a previous study, the authors worked with the site decision makers, state regulators, and U.S. Environmental Protection Agency regional regulators to develop a CERCLA-based multiobjective decision analysis value model and used the model to perform a screening analysis of 28 remedial alternatives. The analysis results identified an innovative technology, in situ vitrification, with high effectiveness versus cost. Since this technology had not been used on this scale before, the major uncertainties were contaminant migration and pressure buildup. Pressure buildup was a safety concern due to the potential risks to worker safety. With the help of environmental technology experts remedial alternative changes were identified to mitigate the concerns about contaminant migration and pressure buildup. The analysis results showed that the probability of an event with a risk to worker safety had been significantly reduced. Based on these results, site decision makers have refocused their test program to examine in situ vitrification and have continued the use of the CERCLA-based decision analysis methodology to analyze remedial alternatives.

Decision Support Techniques↗

Water manganese exposure and children's intellectual function in Araihazar, Bangladesh.

Exposure to manganese via inhalation has long been known to elicit neurotoxicity in adults, but little is known about possible consequences of exposure via drinking water. In this study, we report results of a cross-sectional investigation of intellectual function in 142 10-year-old children in Araihazar, Bangladesh, who had been consuming tube-well water with an average concentration of 793 microg Mn/L and 3 microg arsenic/L. Children and mothers came to our field clinic, where children received a medical examination in which weight, height, and head circumference were measured. Children's intellectual function was assessed on tests drawn from the Wechsler Intelligence Scale for Children, version III, by summing weighted items across domains to create Verbal, Performance, and Full-Scale raw scores. Children provided urine specimens for measuring urinary As and creatinine and were asked to provide blood samples for measuring blood lead, As, Mn, and hemoglobin concentrations. After adjustment for sociodemographic covariates, water Mn was associated with reduced Full-Scale, Performance, and Verbal raw scores, in a dose-response fashion; the low level of As in water had no effect. In the United States, roughly 6% of domestic household wells have Mn concentrations that exceed 300 microg Mn/L, the current U.S. Environmental Protection Agency lifetime health advisory level. We conclude that in both Bangladesh and the United States, some children are at risk for Mn-induced neurotoxicity.

Arsenic↗