Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DIMETHYLFORMAMIDE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,117 records · Page 62Linked to original sources
PubMed2005

Contact angle studies on anodic porous alumina.

The preparation of nanostructures using porous anodic aluminum oxide (AAO) as templates involves the introduction of dissolved materials into the pores of the membranes; one way to determine which materials are preferred to fill the pores involves the measurement of the contact angles (theta) of different solvents or test liquids on the AAOs. Thus, we present measurements of contact angles of nine solvents on four different AAO sheets by tensiometric and goniometric methods. From the solvents tested, we found dimethyl sulfoxide (DMSO) and N,N(')-dimethylformamide (DMF) to interact with the AAOs, the polarity of the solvents and the surfaces being the driving force.

Journal Article↗
PubMed2005

One-step synthesis of Mn3O4 nanoparticles: structural and magnetic study.

One-step room-temperature synthesis of nanocrystalline Mn3O4 hausmannite, without heating posttreatment, was carried out from a simple dissolution of manganese(II) acetate in a mixture of N,N'-dimethylformamide (DMF) and water. Homogeneous nanocrystals like rods were obtained, with an average width and length of 6.6+/-1.2 nm and 17.4+/-4.1 nm, respectively, and a preferential growth along the 001 direction. Magnetization measurements on a powdered sample showed ferrimagnetic behavior at low temperatures. Under zero-field cooling (ZFC) measurement at 100 Oe, the observed blocking temperature (T(B)) was 37 K.

Journal Article↗
PubMed2005

Volumetric behavior of a bolaamphiphile in different amides-water and ethylene glycol-water mixtures.

The effect of binary aqueous mixtures of ethylene glycol (EG), formamide (FA), N-methylformamide (NMF), dimethylformamide (DMF), and their pure phase on the apparent molar volume phi(V) of the bolaamphiphile decamethonium bromide (C10Me6) has been investigated at 298.15 K. The behavior of standard molar volumes V2(0) and transfer volumes Delta(t)phi(V) of C10Me6 from water to solvent/water (S/W) binary mixtures, shows different minima and maxima depending on the composition of the solvent. This behavior is influenced by the nature of the cosolvent and on the type of the solute and more or less corresponds to volumetric changes in the S/W mixture. The investigation of the transfer volumes in different fixed concentrations reveals an inversion of Delta(t)phi(V) values between the compositions, which suggests a differentiation of the effects of different volume contributions on the partial molar volume of ions. The correlation of Delta(t)phi(V) with the dielectric constant of the aqueous amide mixtures shows that the behavior of Delta(t)phi(V) vs x(amide) reflects the changes of epsilon(E) vs x(amide).

Journal Article↗
PubMed2005

Surface modification of crosslinked poly(styrene-divinyl benzene) micrometer-sized particles of narrow size distribution by ozonolysis.

Micrometer-sized polystyrene template particles of narrow size distribution were prepared by dispersion polymerization of styrene in 2-methoxyethanol. Uniform micrometer-sized polystyrene/crosslinked poly(styrene-divinyl benzene) composite particles were formed by a single-step swelling process of the template particles with styrene, divinyl benzene and benzoyl peroxide, followed by polymerization at 70 degrees C. Uniform micrometer-sized crosslinked poly(styrene-divinyl benzene) particles of higher surface area were produced by dissolution of the template polystyrene part of the former composite particles with N,N-dimethylformamide. Hydroperoxide conjugated crosslinked poly(styrene-divinyl benzene) particles were produced by ozonolysis of these particles. The effect of ozonolysis conditions, such as exposure time and flow rate of the ozone, on the hydroperoxide conjugation to the crosslinked particles was also studied. Functionalization of the crosslinked poly(styrene-divinyl benzene) particles was performed by graft polymerization of vinylic monomers such as acrylonitrile and chloromethylstyrene on the hydroperoxide conjugated crosslinked particles. This was accomplished by raising the temperature (e.g., 70 degrees C) of deairated acetonitrile dispersions containing the hydroperoxide conjugated particles and the vinylic monomers. The influence of various polymerization parameters on the grafting yield, e.g., monomer concentration, conjugated hydroperoxide concentration, and temperature, was also elucidated.

Journal Article↗
PubMed2005

The use of acridine orange base (AOB) as molecular probe to characterize nonaqueous AOT reverse micelles.

The behavior of acridine orange base (AOB) in nonaqueous reverse micelles composed of n-heptane/AOT/polar solvent has been performed. Ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA) were employed as water substitutes. The studies were performed by static and time-resolved emission spectroscopy. Thus, the distribution of AOB between the two pseudophases of the aggregates was quantified by measuring the partition constants from emission spectra at different surfactant concentration. Similar values to those obtained by means of absorption spectroscopy were obtained. This match is indicating that AOB is not experiencing partition during the lifetime of the excited state. Partitioning to the micelles is strongly favored in micelles containing hydrogen-bond donor (HBD) solvents rather than non-HBD solvents. Variations of fluorescence lifetimes with AOT concentration confirm these results. By the solvatochromic behavior of AOB in the different systems it is shown that the microenvironment at the interface is distinct from that of the bulk polar solvent, indicating that the probe senses no "free" solvent. The steady state anisotropy (r) was measured for EG/AOT/n-heptane and DMF/AOT/n-heptane systems as representatives for HBD and non-HBD polar solvents, respectively. The value of r is higher in the micelles containing EG than that obtained with DMF, and increases with AOT concentration. This is explained as due to highly structured polar solvents in the inner core. EG is interacting with the polar heads of AOT through hydrogen-bond interaction, while DMF can only interact with the Na+ counterions. This is confirmed by the time-resolved emission spectra (TRES) of the probe in the micellar systems, in comparison with the bulk solvents.

Journal Article↗
PubMed2005

The facile flow-injection spectrophotometric detection of gold(III) in water and pharmaceutical samples using 3,5-dimethoxy-4-hydroxy-2-aminoacetophenone isonicotinoyl hydrazone (3,5-DMHAAINH).

A simple, sensitive and rapid flow-injection spectrophotometric method was developed for the determination of trace amounts of Au(III) in aqueous dimethylformamide (DMF). The method is based on formation of Au(III)-(3,5-DMHAAINH)3 complex. The optimum conditions for the chromogenic reaction of Au(III) with 3,5-DMHAAINH is studied and the colored (reddish brown) complex is selectively monitored at lambda(max) 490 nm at pH 6.0. The reaction and flow conditions of the full experimental design were optimized. The detection limit (2 s) of 0.1 microg l-1 Au(III) was obtained at a sampling rate of 15 samples h-1. Beer's law is obeyed over the range of 0.30-4.00 microg ml-1. The molar absorptivity and Sandell's sensitivity were 3.450x10(4) M and 0.0050 microg ml-1, respectively. Job's method of continuous variation and stability constants corresponding to these maxima was determined and found to be 9.3x10(15) (1:3, M:R) (M, metal; R, reagent). The detailed study of various interferences confirmed the high selectivity of the developed method. The method was successfully applied for the determination of trace amount of Au(III) in water and pharmaceutical samples. The results obtained were in agreement with the reported methods at the 95% confidence level.

Acetophenones↗
PubMed2003

Development of chemiluminescent ELISAs to DDT and its metabolites in food and environmental samples.

Two enzyme-linked immunosorbent assays (ELISA) with chemiluminescent (CL) detection for the insecticide DDT and the group of DDT-related compounds have been optimized and characterized. Both conjugate-coated ELISAs are based on monoclonal antibodies (MAbs) of different specificity and homologous protein conjugates. Effects of several physicochemical factors (ionic strength, pH, Tween-20 and Bovine serum albumin (BSA) concentrations) and solvents (methanol, ethanol, acetone and N,N'-dimethylformamide) on the performance of the assays were studied and optimized. For the DDT-selective assay, the sensitivity, estimated as the I(50) value, was 0.6 microg/l, with a linear working range between 0.1 and 2 microg/l and a limit of detection of 0.06 microg/l. For the DDT group-selective assay, the sensitivity was 0.2 microg/l, with a linear working range between 0.07 and 1 microg/l and a limit of detection of 0.04 microg/l. CL-ELISAs were four times more sensitive compared to colorimetric ELISAs. Finally, both immunoassays were applied to the detection of DDT and group of DDT-related compounds in spiked real water, soil and food samples.

Cross Reactions↗
PubMed2004

Peroxidase-catalyzed co-oxidation of 3,3',5,5'-tetramethylbenzidine in the presence of substituted phenols and their polydisulfides.

The steady-state kinetics of the horseradish peroxidase (HRP)-catalyzed oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) has been studied in the presence of 2-amino-4-nitrophenol (ANP), gallic acid (GA) or 4,4'-dihydroxydiphenylsulfone (DDS) and their polydisulfides poly(ADSNP), poly(DSGA), poly(DSDDS) at 20 degrees C in 10 mM phosphate buffer, pH 6.4, supplemented with 5-10% dimethylformamide. The second-order rate constants for the reactions of ANP, GA, poly(DSGA) and poly(DSDDS) with HRP-Compound I (k2) and Compound II (k3) have been determined at 25 degrees C in 10 mM phosphate buffer, pH 6.0 by stopped-flow spectrophotometry. ANP, GA and their polydisulfides strongly inhibited HRP-catalyzed TMB oxidation. Inhibition constants (Ki) and stoichiometric coefficients of inhibition (f) have been determined for these reactions. The most effective inhibitor was poly(DSGA) (Ki=1.3 microM, f=35.6). The oxidation of substrate pairs by HRP, i.e., TMB-DDS and TMB-poly(DSDDS) at pH 7.2 resulted in a approximately 8- and approximately 12-fold stimulation of TMB oxidation rates, respectively. The mechanisms of the HRP-catalyzed co-oxidation of TMB-phenol pairs are discussed.

Antioxidants↗
PubMed2004

Binuclear copper(II) complexes of tolfenamic: synthesis, crystal structure, spectroscopy and superoxide dismutase activity.

The synthesis and characterization of copper(II) complexes with a potent non-steroidal anti-inflammatory drug, tolfenamic acid, Htolf, with formula [Cu(tolf)(2)L](2) (where L is H(2)O or DMF, N,N-dimethylformamide) were investigated. The crystal and molecular structure of [Cu(tolf)(2)(DMF)](2) was reported. Crystallographic data are as follows: monoclinic system, space group P2(1)/n with cell constants a=9.068(2) A, b=14.514(3) A, c=22.826(4) A, V=2948.9(10) A(3) and Z=2. The crystal structure consists of binuclear, quadruply bridged neutral molecule with a Cu-Cu bond length of 2.6075(19) A. The complex is self-assembled via C-H-pi intermolecular stacking interactions. Spectroscopic and electrochemical studies were reported. The superoxide dismutase activity is measured and compared with those of superoxide dismutase enzyme, SOD, the free ligand and related copper complexes with non-steroidal anti-inflammatory drugs, NSAIDs. IC(50) value was measured by the Fridovich test (1.97+/-0.17 microM), which showed that [Cu(tolf)(2)L](2) is a good superoxide scavenger.

Journal Article↗
PubMed2004

Metal-assisted light-induced DNA cleavage activity of 2-(methylthio)phenylsalicylaldimine Schiff base copper(II) complexes having planar heterocyclic bases.

Ternary copper(II) complexes [CuLL'](ClO(4)), where HL is NSO-donor Schiff base (2-(methylthio)phenyl)salicylaldimine and L' is NN-donor phenanthroline bases like 1,10-phenanthroline (phen), dipyridoquinoxaline (dpq) and 2,9-dimethyl-1,10-phenanthroline (dmp), are prepared and structurally characterized by X-ray crystallography. The complexes have a distorted square-pyramidal (4+1) CuN(3)OS coordination geometry. While [CuL(phen)](ClO(4)) and [CuL(dpq)](ClO(4)) show axial sulfur ligation, [CuL(dmp)](ClO(4)) has the sulfur bonded at the equatorial site. The one-electron paramagnetic complexes exhibit axial electron paramagnetic resonance (EPR) spectra in dimethylformamide glass at 77 K. The complexes are redox active and a quasireversible electron transfer process near 0.0 V vs saturated calomel electrode (SCE) in DMF-Tris buffer (1:4 v/v at pH 7.2) involving Cu(II)/Cu(I) couple is observed for the phen and dpq complexes. The dmp complex exhibits an irreversible reduction process forming bis(dmp)copper(I) species. A profound effect of the substituents of the phenanthroline bases is observed on the binding of the complexes to the calf thymus (CT) and in the cleavage of supercoiled (SC) pUC19 DNA. The phen and dpq complexes show DNA cleavage activity in presence of mercaptopropionic acid (MPA). The dmp complex is cleavage inactive in presence of MPA. All the complexes show photocleavage activity when irradiated with a monochromatic UV light of 312 nm. The dpq complex also cleaves SC DNA on visible light irradiation at 436, 532 and 632.8 nm but with a longer exposure time and higher complex concentration. The cleavage reactions in presence of MPA are found to involve hydroxyl radical. The photocleavage reactions are found to occur under aerobic conditions showing an enhancement of cleavage in D(2)O and inhibition with azide addition suggesting formation of singlet oxygen as a reactive species. The roles of sulfur of the Schiff base as photosensitizer and the phenanthroline bases as minor groove binder, and their influence on the photocleavage activity are discussed. The quinoxaline ligand exhibits significant photosensitizing effect assisted by the copper(II) center.

Animals↗
PubMed2006

Synthesis, crystal structure, DNA binding and photo-induced DNA cleavage activity of (S-methyl-L-cysteine)copper(II) complexes of heterocyclic bases.

Ternary S-methyl-L-cysteine (SMe-l-cys) copper(II) complexes [Cu(SMe-L-cys)(B)(H(2)O)](X) (1-4), where the heterocyclic base B is 2,2'-bipyridine (bpy, 1), 1,10-phenanthroline (phen, 2), dipyridoquinoxaline (dpq, 3) and dipyridophenazine (dppz, 4), and X is ClO(4)(-) (1-3) or NO(3)(-) (4), are prepared and their DNA binding and cleavage properties studied. Complexes 2 and 4 are structurally characterized by X-ray crystallography. Both the crystal structures show distorted square-pyramidal (4+1) CuN(3)O(2) coordination geometry of the complexes in which the N,O-donor S-methyl-L-cysteine and N,N-donor heterocyclic base bind at the basal plane with a water molecule as the axial ligand. In addition, the dppz structure shows the presence of a 1D-chain formed due to covalent linkage of the carboxylate oxygen atom belonging to another molecule at the elongated axial site. The crystal structures show chemically significant non-covalent interactions like hydrogen bonding involving the axial aqua ligand and pi-pi interactions between dppz ligands. The complexes display a d-d band in the range of 605-654 nm in aqueous dimethylformamide (DMF) solution (9:1 v/v). The redox active complexes show quasireversible cyclic voltammetric response near 0.1 V in DMF assignable to the Cu(II)/Cu(I) couple. The complexes show good binding affinity to calf thymus (CT) DNA giving the order: 4 (dppz)>3 (dpq)>2 (phen)>>1 (bpy). The intrinsic binding constants, obtained from UV-visible spectroscopic studies, are 1.3x10(4) and 2.15 x 10(4) M(-1) for 3 and 4, respectively. Control DNA cleavage experiments using pUC19 supercoiled (SC) DNA and minor groove binder distamycin suggest major groove binding propensity for the dppz complex, while the phen and dpq complexes bind at the minor groove of DNA. Complexes 2-4 show DNA cleavage activity in dark in the presence of a reducing agent 3-mercaptopropionic acid (MPA) via a mechanistic pathway involving formation of hydroxyl radical as the reactive species. The complexes also show efficient photo-induced DNA cleavage activity on irradiation with a monochromatic UV light of 365 nm in absence of any external reagent. The cleavage efficiency follows the order: 3>4>2. The complexes exhibit significant DNA cleavage activity on irradiation with visible light of 633 nm. Control experiments show inhibition of cleavage in presence of singlet oxygen quenchers like sodium azide, histidine and enhancement of cleavage in D(2)O, suggesting formation of singlet oxygen as a reactive species in a type-II process. The photosensitizing effect of the thiomethyl group of the amino acid is evidenced from the observation of significant DNA photocleavage activity of the phen complex 2 as the phen ligand itself is not a photosensitizer.

Animals↗
PubMed2006

Synthesis, characterization and assessment of the cytotoxic properties of cis and trans-[Pd(L)(2)Cl(2)] complexes involving 6-benzylamino-9-isopropylpurine derivatives.

A series of square-planar Pd(II) complexes of the composition cis-[Pd(L(n))(2)Cl(2)] {L(1)=2-chloro-6-benzylamino-9-isopropylpurine (1), L(2)=2-chloro-6-[(4-methoxybenzyl)amino]-9-isopropylpurine (2), L(3)=2-chloro-6-[(2-methoxybenzyl)amino]-9-isopropylpurine (3) and 2-[(chloropropyl)amino]-6-benzylamino-9-isopropylpurine (6)} has been synthesized by the reaction of PdCl(2) with L(n) in a 1:2 molar ratio. In contrast, the same reaction followed by recrystallization of the product from N,N'-dimethylformamide (DMF) leads to trans-[Pd(L(n))(2)Cl(2)] x nDMF {L(3), n=0 (4), n=1(4( *)DMF); L(4)=2-chloro-6-[(2,3-dimethoxybenzyl)-amino]-9-isopropylpurine, n=0 (5), n=1.5 (5( *)DMF). The compounds have been characterized by elemental analyses, conductivity measurements, electrospray mass spectra in the positive ion mode (ES+MS), FTIR, (1)H and (13)C NMR spectra, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Moreover, the complexes 2 and 6 have been also investigated by (15)N NMR spectroscopy. The molecular structures of L(5), {(H(2+)L(5))(Cl(-))(2)} x H(2)O, i.e. the protonated form of L(5), trans-[Pd(L(3))(2)Cl(2)] (4) and trans-[Pd(L(4))(2)Cl(2)] (5) have been determined by single crystal X-ray analysis. NMR data and X-ray structures revealed that the organic molecules are coordinated to Pd via N7 atom of a purine moiety. All the complexes and the corresponding ligands have been tested in vitro for their cytotoxicity against four human cancer cell lines: breast adenocarcinoma (MCF7), malignant melanoma (G361), chronic myelogenous leukaemia (K562) and osteogenic sarcoma (HOS). Promising in vitro cytotoxic effect has been found for cis-[Pd(L(2))(2)Cl(2)] (2), having the IC(50) values of 12, 10, 25, and 14 microM against MCF7, G361, K562, and HOS, respectively, and for trans-[Pd(L(3))(2)Cl(2)].DMF (4) with the IC(50) value of 15 microM against G361.

Antineoplastic Agents↗
PubMed2006

Multiple solvent crystal structures: probing binding sites, plasticity and hydration.

Multiple solvent crystal structures (MSCS) of porcine pancreatic elastase were used to map the binding surface the enzyme. Crystal structures of elastase in neat acetonitrile, 95% acetone, 55% dimethylformamide, 80% 5-hexene-1,2-diol, 80% isopropanol, 80% ethanol and 40% trifluoroethanol showed that the organic solvent molecules clustered in the active site, were found mostly unclustered in crystal contacts and in general did not bind elsewhere on the surface of elastase. Mixtures of 40% benzene or 40% cyclohexane in 50% isopropanol and 10% water showed no bound benzene or cyclohexane molecules, but did reveal bound isopropanol. The clusters of organic solvent probe molecules coincide with pockets occupied by known inhibitors. MSCS also reveal the areas of plasticity within the elastase binding site and allow for the visualization of a nearly complete first hydration shell. The pattern of organic solvent clusters determined by MSCS for elastase is consistent with patterns for hot spots in protein-ligand interactions determined from database analysis in general. The MSCS method allows probing of hot spots, plasticity and hydration simultaneously, providing a powerful complementary strategy to guide computational methods currently in development for binding site determination, ligand docking and design.

Animals↗
PubMed2005

Rapid determination of the antiparasitic drugs flubendazole and febantel in feeds by HPLC with ultraviolet detection.

A rapid and very effective analytical procedure for the simultaneous HPLC determination of two anthelmintics, Flubendazole (FLUB) and Febantel (FEBA), in swine and poultry feeds was developed and tested. The ground feed samples were extracted using dimethylformamide. The extracts were directly analyzed, without any purification, on a reversed-phase ODS column (150 mm x 4.6 mm, 5 microm) with acetonitrile-phosphate buffer (pH 3; 0.017 M) as mobile phase. Ultraviolet detection of FLUB and FEBA was carried out at 300 nm. The method was validated for specificity, linearity, accuracy, repeatability, limit of detection and limit of quantification. The limits of detection (LOD) of FLUB and FEBA in feeds, based on a detector signal-to-noise ratio of 3, were 3 mg kg(-1) and the lowest levels tested in feeds by this procedure (limit of quantification, LOQ) were 10 mg kg(-1). The mean recovery of FLUB and FEBA from spiked samples, in a concentration range of 10-200 mg kg(-1), was 98% with a CV% of 4% and 99% with a CV% of 2%, respectively.

Animal Feed↗
PubMed2005

Modern spectroscopic techniques in the characterization of Schiff base macrocyclic ligand and its complexes with transition metals.

Mn(II), Co(II), Ni(II), and Cu(II) complexes with a new azamacrocyclic tetradentate [N(4)] ligand i.e. 2,3,9,10-tetraphenyl;l,4,8,11-tetraazacyclotetradeca;1,3,8,10-tetraene (L) have been synthesized and characterized by elemental analysis, molar conductance measurements, magnetic susceptibility measurements, mass, (1)HNMR, IR, electronic and EPR spectral studies. On the basis of their non-electrolytic nature, the probable formula of the complexes is proposed to be [M(L)X(2)], where M=Mn(II), Co(II), Ni(II), and Cu(II), X=Cl(-) and NO(3)(-), in dimethylformamide (DMF). All the complexes are of high-spin type and found to have six coordinated, octahedral geometry for Mn(II), Co(II), and Ni(II) complexes, and tetragonal for Cu(II) complexes. Macrocyclic ligand and its complexes have also been screened against pathogenic bacteria and fungi in vitro as growth inhibiting agent.

Cobalt↗
PubMed2005

FT-Raman spectroscopic evidences for the preferential solvation of sodium tetrafluorobrate in acetonitrile-based mixed solvents.

Solutions of sodium tetrafluorobrate in acetonitrile-dimethylformamide, and acetonitrile-dimethylsulfoxide mixtures have been studied by FT-Raman spectroscopy for three solvent compositions, respectively. New bands due to solvent molecules in the first solvation shell of Na(+) were detected in the region of the O=C--N deformation and CH(3) rocking mode for amide and of the S=O and C--S stretching modes for sulfoxide. The individual solvation numbers of sodium cation in different environment were deduced. In all the cases, it is found that the sodium ion was preferentially solvated by DMF or DMSO in respective binary solvents. This result was further supported by ab initio calculations.

Acetonitriles↗
PubMed2006

Solute-solvent and solvent-solvent interactions in the preferential solvation of 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide in 24 binary solvent mixtures.

The molar transition energy (E(T)) polarity values for the dye 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide were collected in binary mixtures comprising a hydrogen-bond accepting (HBA) solvent (acetone, acetonitrile, dimethyl sulfoxide (DMSO), and N,N-dimethylformamide (DMF)) and a hydrogen-bond donating (HBD) solvent (water, methanol, ethanol, propan-2-ol, and butan-1-ol). Data referring to mixtures of water with alcohols were also analyzed. These data were used in the study of the preferential solvation of the probe, in terms of both solute-solvent and solvent-solvent interactions. These latter interactions are of importance in explaining the synergistic behavior observed for many mixed solvent systems. All data were successfully fitted to a model based on solvent-exchange equilibria. The E(T) values of the dye dissolved in the solvents show that the position of the solvatochromic absorption band of the dye is dependent on the medium polarity. The solvation of the dye in HBA solvents occurs with a very important contribution from ion-dipole interactions. In HBD solvents, the hydrogen bonding between the dimethylamino group in the dye and the OH group in the solvent plays an important role in the solvation of the dye. The interaction of the hydroxylic solvent with the other component in the mixture can lead to the formation of hydrogen-bonded complexes, which solvate the dye using a lower polar moiety, i.e. alkyl groups in the solvents. The dye has a hydrophobic nature and a dimethylamino group with a minor capability for hydrogen bonding with the medium in comparison with the phenolate group present in Reichardt's pyridiniophenolate. Thus, the probe is able to detect solvent-solvent interactions, which are implicit to the observed synergistic behavior.

Acetone↗
PubMed2005

Non-contact sound speed measurement by optical probing of beam deflection due to sound wave.

We report a non-contact and non-invasive method of sound speed measurement by optical probing of deflected laser beam due to normally incident degenerated shock wave. In this study the shock wave from an exploding wire was degenerated to an ordinary sound wave at the distance exceeding 0.23 m. Temporal resolution of the deflected beam signal was improved by passing through an adequate electronic high-pass filter, as a result we obtained a better temporal resolution than that of the acoustic pressure detection by PZT transducer in terms of rising time. The spatial resolution was improved by passing the refracted beam signal into the edge of focusing lens to make a larger deflection angle. Sound speed was calculated by monitoring the time of flight of transient deflected signal at the predetermined position. Sound speed has been measured in air, distilled water and acryl, agreed well with the published values. The sound speed measured in the solution of glycerin, magnesium sulfate (MgSO4), and dimethylformamide with various mole fractions also agrees within 3% of relative error with those measured in the present work by ultrasonic pulse echo method. The results suggest that the method proposed is to be reliable and reproducible.

Journal Article↗