Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Porosity”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources

Morphology of and release behavior from porous polyurethane microspheres.

A novel biomaterial application of porous microspheres is for sustained delivery of biologically active agents. Recent studies have pointed out the importance of biomaterial porosity in promoting biocompatibility and controlling release rate of active agents. The objective of this research was to investigate the effect of chain-extending agent on the porosity and release behavior of polyurethane (PU) microspheres prepared using a two-step suspension polycondensation method with methylene diphenyl diisocyanate (MDI) as the isocyanate, polyethylene glycol (PEG400) as the diol, and 1,4-butanediol as the chain-extending agent. Chain-extending agent was used to increase the ratio of hard to soft segments of the PU network, and its effect on microsphere morphology was studied with scanning electron microscopy. According to the results, porosity was significantly affected by the amount of chain-extending agent. The pore size decreased as the concentration of chain-extending agent increased from zero to 50 mole%. With further increase of chain-extending agent to 60 and 67%, PU chains became stiffer and formation of pores was inhibited. Therefore, pore morphology was significantly affected by variations in the amount of chain-extending agent. The release behavior of microspheres was investigated with diazinon as the active agent. After an initial burst, corresponding to 3% of the incorporated amount of active agent, the release rate was zero order.

Drug Carriers↗

Gentamicin release from modified acrylic bone cements with lactose and hydroxypropylmethylcellulose.

Modified polymethylmethacrylate (PMMA) bone cements formulations were prepared by including different proportions of gentamicin and release modulators such as lactose or hydroxypropylmethylcellulose (HPMC). Surface aspect, gentamicin release and porosity of these modified formulations were studied by means of scanning electron microscopy (SEM), a specially designed system for the dissolution studies of the bone cements, and mercury intrusion porosimetry. Lactose modified cements presented an irregular surface with numerous hollows and voids due to the lactose dissolution. HPMC cements presented a characteristic laminated and flaky surface. The drug release of lactose formulations was up to four-fold greater (13%) than the commercial bone cement CMW1 Gentamicin one (3%). The amount of gentamicin eluted at the first withdrawn sample ranged from 30% to 60% of total gentamicin released over the assay. Gentamicin release from lactose formulations increased as lactose percentage was increased which agree with the porosity results. Nevertheless, the use of release modulator HPMC increased porosity, but did not produce an increase in the gentamicin release. HPMC dissolution creates a surrounding sticky and viscous medium similar to a gel that makes the gentamicin release from the cement matrix difficult.

Anti-Bacterial Agents↗

Tissue response to polypropylene meshes used in the repair of abdominal wall defects.

The degree of integration of biomaterials used in the repair of abdominal wall defects seems to depend upon the structure of the prosthesis. Several polypropylene (PP) prostheses are currently available which differ in the number of PP filaments, the type of weave and the porosity. The aim of this study was to evaluate the integration, adhesion formation and resistance to traction of three types of PP prostheses (Marlex, Trelex and Prolene) used in the partial or total repair of abdominal wall defects. Abdominal wall defects (7 x 5 cm) were created in 54 New Zealand rabbits involving all the tissue layers (total substitutions (TS); n = 27) or all layers excluding the parietal peritoneum (partial substitutions (PS); n = 27). The defects were repaired with PP monofilament prostheses of different weave (1 mm porosity) (Marlex, n = 18; Trelex, n = 18) or bifilament (2 mm porosity) (Prolene; n = 18). They were placed in contact on one side with subcutaneous tissue and on the other with abdominal viscera or parietal peritoneum. Animals were killed at 30, 60 and 90 days and samples of prosthesis and scar tissue processed for light and scanning microscopy. The adhesion formation with viscera was evaluated. Resistance to traction was measured with a tensiometer using strips including the prosthesis and anchorage tissue. Adhesions were detected in all the TS and in four PS. Microscopic analysis revealed total integration of the TS samples by fibrous and disorganized tissue. Prostheses used for PS were integrated by white adipose tissue with the exception of the areas around the mesh nodes and anchorage zones. The foreign body reaction could be seen as a moderate accumulation of white blood cells. Tensiometric analysis showed an increase in resistance to traction with time (P < 0.001) in each type of prosthesis, but no differences were detected (P > 0.001) between them. We concluded that: (a) the formation of adhesions was almost inhibited when the parietal peritoneum was left intact; (b) in both TS and PS, polypropylene prostheses integrated completely although the composition of the scar tissue was seem to differ; and (c) resistance to traction was similar in both TS and PS.

Abdominal Muscles↗

Microcapsules of alginate-chitosan--I. A quantitative study of the interaction between alginate and chitosan.

The binding of chitosan to alginate beads was studied quantitatively by using radioactive labelled fractions of chitosan. The alginate-chitosan capsules were made either by dropping a solution of sodium alginate into a solution containing chitosan or by incubating calcium alginate beads in a solution of chitosan. The first procedure yielded a binding of 0.015 microg chitosan per mm2 of capsule surface, while the latter procedure yielded over 2 microg mm(-2). The maximum obtained weight ratio of chitosan to alginate in a microcapsule after 24 h was 0.40. The binding of chitosan was markedly increased by reducing the number average molecular weight of chitosan below 20000 Da and by increasing the porosity of the alginate gel. The porosity was increased by producing homogeneous gels, and by adding calcium chloride to the chitosan solution during the membrane forming stage. The effect of calcium ions on the porosity of the gel was studied by experiments involving release of blue dextran from calcium alginate beads. The binding of chitosan was also found to increase with decreasing fraction of N-acetylations, FA, on chitosan in the range of FA = 0.3 to FA = 0, and with increasing pH in the range from pH 4 to 6. Capsules with a diameter of 500 microm had a higher weight ratio of chitosan to alginate after 24 h of binding than the capsules with the larger diameter of 1500 microm.

Acetylation↗

Bioresorbable bone graft substitutes of different osteoconductivities: a histologic evaluation of osteointegration of poly(propylene glycol-co-fumaric acid)-based cement implants in rats.

Bioresorbable bone graft substitutes may significantly reduce the disadvantages associated with autografts, allografts and other synthetic materials currently used in bone graft procedures. We investigated the biocompatibility and osteointegration of a bioresorbable bone graft substitute made from the unsaturated polyester poly(propylene-glycol-co-fumaric acid), or simply poly(propylene fumarate), PPF, which is crosslinked in the presence of soluble and insoluble calcium filler salts. Four sets of animals each having three groups of 8 were evaluated by grouting bone graft substitutes of varying compositions into 3-mm holes that were made into the anteromedial tibial metaphysis of rats. Four different formulations varying as to the type of soluble salt filler employed were used: set 1--calcium acetate, set 2--calcium gluconate, set 3--calcium propionate, and set 4--control with hydroxapatite, HA, only. Animals of each of the three sets were sacrificed in groups of 8 at postoperative week 1, 3, and 7. Histologic analysis revealed that in vivo biocompatibility and osteointegration of bone graft substitutes was optimal when calcium acetate was employed as a soluble salt filler. Other formulations demonstrated implant surface erosion and disintegration which was ultimately accompanied by an inflammatory response. This study suggested that PPF-based bone graft substitutes can be designed to provide an osteoconductive pathway by which bone will grow in faster because of its capacity to develop controlled porosities in vivo. Immediate applicability of this bone graft substitute, the porosity of which can be tailored for the reconstruction of defects of varying size and quality of the recipient bed, is to defects caused by surgical debridement of infections, previous surgery, tumor removal, trauma, implant revisions and joint fusion. Clinical implications of the relation between developing porosity, resulting osteoconduction, and bone repair in vivo are discussed.

Animals↗

Bacterial bio-mediated calcite precipitation for monumental stones conservation: methods of evaluation.

The weathering of monumental stones is a complex process inserted in the more general 'matter transformation cycle' operated by physical, chemical and biological factors. The consequence of these combined actions is a loss of cohesion with dwindling and scaling of stone material and the induction of a progressive mineral matrix dissolution. In the case of calcareous stones, calcite leaching increases the material porosity and decreases its mechanical features with a general weakening of the superficial structural strength. Attempts to stop, or at least to slow down, deterioration of monumental stones has been made by conservative treatments with both inorganic or organic products. More recent studies show a new approach to hinder these phenomena by inducing a bio-mediated precipitation of calcite directly inside the stone porosity. This can be achieved either through the application of organic matrix macromolecules extracted from sea shells or of living bacteria. The effectiveness of the treatment using calcinogenic bacteria has been evaluated with laboratory tests specifically developed to evaluate the parameters such as : porosity, superficial strength and chromatic changes, influenced by the treatment itself. The results obtained seem to indicate that this type of treatment might not be suitable for monumental stone conservation.

Bacteria↗

Bone histomorphometry and serum concentrations of intact parathyroid hormone (PTH(1-84)) in patients with primary hyperparathyroidism.

The consequences of bone disease in primary hyperparathyroidism (PHPT) are still a matter of discussion. We studied transiliac bone biopsies of 24 patients (9 men and 15 women) with mild to moderate PHPT, proven by surgery. Histomorphometric data were compared with control values obtained from autopsy bone samples. The biopsies of the PHPT patients were characterized by increased trabecular bone volume (P < 0.01) and surface (P < 0.02), increased osteoid volume and increased osteoid and resorption surfaces (P < 0.001). Cortical porosity showed a non-significant increase in the PHPT patients. In the patients the fasting serum concentrations of parathyroid hormone (PTH(1-84)) correlated positively with cortical porosity (r = 0.50, P = 0.02), osteoid volume (r = 0.40, P = 0.05), osteoid surface (r = 0.50, P = 0.01), and eroded surface (r = 0.59, P < 0.01). It is concluded that moderate PHPT is associated with preservation of trabecular bone, whereas cortical bone may be lost in these patients. Cortical porosity and the parameters of bone turnover correlate well with the fasting serum PTH(1-84) concentration.

Adolescent↗

Convergent-flow tracer tests in heterogeneous media: combined experimental-numerical analysis for determination of equivalent transport parameters.

In modeling transport within naturally heterogeneous aquifers, it is usually assumed that the transport equations valid at local scales can also be applied at larger scales. At larger scales, the heterogeneous domain is represented by an equivalent homogeneous medium. Convergent-flow tracer tests constitute one of the most frequently used field tests to estimate effective input parameters of equivalent homogeneous aquifers. Traditionally, statistical approaches applied to groundwater flow and solute transport have provided tools to estimate these equivalent parameters. These approaches are based on a number of simplifications including the assumption that the point transmissivity values follow a multilog-normal random function. Several investigators have found that this assumption may not be valid in many field cases. In order to study the applicability of the equivalent homogeneous formulation in a nontraditional stochastic field, a number of experimental and numerical studies were conducted. The results are used to determine the apparent values of porosity and dispersivity that would be obtained if convergent-flow tracer tests were conducted in a deterministically generated heterogeneous transmissivity field displaying anisotropy in the correlation structure. It is shown that in this particular heterogeneous media, apparent porosity strongly depends on connectivity rather than on transmissivity. This dependence on connectivity questions the theoretical results obtained in continuum equivalent fields to estimate effective porosity.

Models, Theoretical↗

Solute transport in crystalline rocks at Aspö--I: geological basis and model calibration.

Water-conducting faults and fractures were studied in the granite-hosted Aspö Hard Rock Laboratory (SE Sweden). On a scale of decametres and larger, steeply dipping faults dominate and contain a variety of different fault rocks (mylonites, cataclasites, fault gouges). On a smaller scale, somewhat less regular fracture patterns were found. Conceptual models of the fault and fracture geometries and of the properties of rock types adjacent to fractures were derived and used as input for the modelling of in situ dipole tracer tests that were conducted in the framework of the Tracer Retention Understanding Experiment (TRUE-1) on a scale of metres. After the identification of all relevant transport and retardation processes, blind predictions of the breakthroughs of conservative to moderately sorbing tracers were calculated and then compared with the experimental data. This paper provides the geological basis and model calibration, while the predictive and inverse modelling work is the topic of the companion paper [J. Contam. Hydrol. 61 (2003) 175]. The TRUE-1 experimental volume is highly fractured and contains the same types of fault rocks and alterations as on the decametric scale. The experimental flow field was modelled on the basis of a 2D-streamtube formalism with an underlying homogeneous and isotropic transmissivity field. Tracer transport was modelled using the dual porosity medium approach, which is linked to the flow model by the flow porosity. Given the substantial pumping rates in the extraction borehole, the transport domain has a maximum width of a few centimetres only. It is concluded that both the uncertainty with regard to the length of individual fractures and the detailed geometry of the network along the flowpath between injection and extraction boreholes are not critical because flow is largely one-dimensional, whether through a single fracture or a network. Process identification and model calibration were based on a single uranine breakthrough (test PDT3), which clearly showed that matrix diffusion had to be included in the model even over the short experimental time scales, evidenced by a characteristic shape of the trailing edge of the breakthrough curve. Using the geological information and therefore considering limited matrix diffusion into a thin fault gouge horizon resulted in a good fit to the experiment. On the other hand, fresh granite was found not to interact noticeably with the tracers over the time scales of the experiments. While fracture-filling gouge materials are very efficient in retarding tracers over short periods of time (hours-days), their volume is very small and, with time progressing, retardation will be dominated by altered wall rock and, finally, by fresh granite. In such rocks, both porosity (and therefore the effective diffusion coefficient) and sorption K(d)s are more than one order of magnitude smaller compared to fault gouge, thus indicating that long-term retardation is expected to occur but to be less pronounced.

Calibration↗

Computational modeling of cerebral diffusion-application to stroke imaging.

Water diffusion within the structure of a brain extracellular space is analyzed numerically for various diffusion parameters of brain tissue namely extracellular space porosity and tortuosity. An algorithm for predicting diffusion pattern of water molecules within human brain considering the mechanics of water diffusion within porous media is developed. The extracellular space is modeled as a homogeneous porous medium with uniform porosity and permeability. Discretization of the fluid flow, heat transfer and mass transport equations is achieved using a finite element scheme based on the Galerkin method of weighted residuals. Concentration maps are developed in this study for various clinical conditions. The effect of the space porosity and the turtousity on the heat and mass transport within the extracellular space are found to be significant. The results presented in this work play an important role in producing more effective imaging techniques for brain injury based on the apparent diffusion coefficient.

Algorithms↗

Plasticisation of amylodextrin by moisture. Consequences for compaction behaviour and tablet properties.

PURPOSE: Amylodextrin, a starch-based controlled release excipient, spontaneously absorbs moisture during storage. The aim of this study was to investigate plasticisation of amylodextrin by moisture and its effect on compaction and tablet characteristics. METHODS: The glass transition temperature (T(g)) of amylodextrin powders with moisture fractions (x(w)) 0.070<x(w)<0.40 was studied by conventional and modulated DSC. Elastic modulus and yield stress were determined from compressive stress-strain experiments. Compaction behaviour was studied at 3 and 300 mm/s using a compaction simulator. RESULTS: The T(g) of amylodextrin-water blends showed a smooth reduction with increasing x(w), equalling room temperature at x(w)=0.19. Experimentally obtained T(g) values were close to temperatures as predicted by the Gordon-Taylor/Kelley-Bueche model and the modified Couchman-Karasz model. The elastic modulus decreased steeply between x(w)=0.17 and 0.23. Compaction experiments showed that moisture facilitated consolidation due to increasing powder compressibility and reduced compact relaxation. However, at x(w)=0.23, compressibility was reduced and relaxation significantly higher due to the rubbery character of this powder. Consequently, the lowest tablet porosities were obtained around x(w)=0.15. Although decreasing porosities enhanced tablet strengths, the maximum obtainable tablet strengths decreased with moisture due to reduced particle bonding and lowering of the elastic modulus. CONCLUSION: Moisture largely affects the visco-elastic and compaction characteristics of amylodextrin. Hence, control over moisture content is essential to produce tablets with reproducible porosity, strength and dissolution characteristics.

Calorimetry, Differential Scanning↗

The effect of an increase in chain length on the mechanical properties of polyethylene glycols.

The mechanical properties of different molecular weights of polyethylene glycol (PEG) have been determined by formation of compacted tablets and beams, which were subjected to diametral compression and 3-point bending, respectively. From diametral compression, the tensile strength for the different grades of PEG was determined. Flat beams made from powder by compaction were used to determine Young's modulus of elasticity. Beams into which a notch had been introduced after formation allowed the fracture mechanical parameters of critical stress intensity factor, K(IC), and fracture toughness, R, to be determined. Evaluation of these parameters as a function of compact porosity allowed extrapolation to values at zero porosity, providing an estimate of the material properties. The increase in chain length of the PEG was found to have a non-linear effect on tensile strength and Young's modulus. The ductility of the polymer increased proportionally to the increase in chain length, reflected by the linear relationship between K(IC) and the molecular weight. Young's modulus and critical stress intensity factor allowed the estimation of the strain energy release rate, G(IC), which is the driving force in crack propagation. Consequently, the tensile strength at zero porosity was found to be predictable from the values of G(IC) and the molecular weight of the different grades of PEG.

Chemistry, Pharmaceutical↗

Pig manure vermicompost as a component of a horticultural bedding plant medium: effects on physicochemical properties and plant growth.

This experiment was designed to characterize the physical, chemical and microbial properties of a standard commercial horticultural, greenhouse container, bedding plant medium (Metro-Mix 360), that had been substituted with a range of increasing concentrations (0%, 5%, 10%, 25%, 50% and 100% by volume) of pig manure vermicompost and to relate these properties to plant growth responses. The growth trials used tomatoes (Lycopersicon esculentum Mill.), grown in the substituted media for 31 days under glasshouse conditions, with seedling growth recorded in 20 pots for each treatment. Half of the tomato seedlings (10 pots per treatment) were watered daily with liquid inorganic fertilizer while the other half received water only. The percentage total porosity, percentage air space, pH and ammonium concentrations of the container medium all decreased significantly, after substitution of Metro-Mix 360 with equivalent amounts of pig manure vermicompost; whereas bulk density, container capacity, electrical conductivity, overall microbial activity and nitrate concentrations, all increased with increasing substitutions of vermicompost. The growth of tomato seedlings in the potting mixtures containing 100% pig manure vermicompost was reduced, possibly as a result of high soluble salt concentrations in the vermicompost and poorer porosity and aeration. The growth of tomato seedlings was greatest after substitution of Metro-Mix 360 with between 25% and 50% pig manure vermicompost, with more growth occurring in combinations of pig manure vermicompost treated regularly with a liquid fertilizer solution than in those with no fertilizer applied. Some of the growth enhancement in these mixtures seemed to be related to the combined effects of improved porosity, aeration and water retention in the medium and the high nitrate content of the substrate, which produced an increased uptake of nitrogen by the plant tissues, resulting in increased plant growth. When the tomato seedlings were watered daily with liquid inorganic fertilizer, substitution of Metro-Mix 360 with a very small amount (5%) of pig manure vermicompost resulted in a significant increase in the growth of tomato seedlings. Such effects could not be attributed solely to the nutritional or physical properties of the pig manure vermicompost. Therefore, it seems likely that the pig manure vermicompost provided other biological inputs, such as plant growth regulators into the container medium, that still need to be identified fully.

Animals↗

Aging-induced osteopenia in avian cortical bone.

Cortical bone loss contributes substantially to the degradation of skeletal integrity associated with aging. However, animal models that closely mimic age-related alterations in cortical bone are limited. The objective of this study was to determine if aged rooster cortical bone demonstrates phenotypic alterations similar to those observed in aged human cortical bone (i.e., expansion of the endocortical and periosteal envelopes and elevated cortical porosity). When compared with young adult roosters, aged roosters demonstrated significant expansion of the endocortical (16%) and periosteal (10%) envelopes, resulting in significantly increased cross-sectional moments of inertia. In addition, aged rooster bone demonstrated significantly elevated cortical porosity (51%) and average area of porosity (83%). We conclude that rooster bone demonstrates age-related adaptations similar to those of humans at both tissue and cellular levels, and may therefore represent a relatively useful, inexpensive animal model for investigating the mechanisms of age-related bone loss.

Age Factors↗

Effects of human parathyroid hormone (1-34), LY333334, on bone mass, remodeling, and mechanical properties of cortical bone during the first remodeling cycle in rabbits.

We have previously shown that parathyroid hormone (PTH) increases cortical bone mass and mechanical strength of female rabbits after 140 days of treatment. However, cortical porosity was also shown to increase. If cortical porosity increases prior to the change in geometry, there may be a transient decrease in cortical bone strength that could make the bone more susceptible to fracture in the early phase of treatment. The purpose of this study is to examine the effects of PTH on the remodeling dynamics and mechanical properties of cortical bone in rabbits, which exhibit haversian remodeling, during the first remodeling cycle after the initiation of treatment. Fifty 9-month-old intact female New Zealand white rabbits were randomized into five groups. A baseline control group was killed at the start of the experiment. The two PTH-treated groups were given human PTH(1-34) at 10 microg/kg daily subcutaneously for 35 (P35) or 70 (P70) days. Two respective age-matched control groups (V35, V70) were injected with vehicle. Histomorphometry of the cortical bone in the tibial midshaft showed that, although intracortical activation frequency was significantly increased by PTH at 35 days, there was no significant increase of cortical porosity in the first remodeling cycle (70 days). Moreover, stimulation of cortical surface bone formation in the treated animals led to significantly greater cortical area and greater bone strength in both P35 and P70. We conclude that, although intracortical remodeling increases within the first remodeling period (70 days) in animals treated with 10 microg/kg PTH, the greater cortical area due to acceleration of bone formation on cortical surfaces increases cortical bone strength. There is no mechanical risk during the first remodeling cycle associated with intermittent PTH treatment in animals with normal bone mass.

Alkaline Phosphatase↗

A correlation for the pressure drop in monolithic silica columns.

To gain insight into how the pressure drop in monolithic silica columns is determined by the microscopic details of the pore structure, a series of well-validated computational fluid dynamics simulations has been performed on a simplified model structure, the so-called tetrahedral skeleton column. From these simulations, a direct correlation between the pressure drop and two main structural properties (skeleton thickness and column porosity) of the monolithic skeleton could be established. The correlation shows good agreement with the experimental pressure-drop data available from the literature on silica monoliths, especially when a correction for the flow-through pore size heterogeneity is made. The established correlation also yields a much more accurate representation of the relation between the flow resistance and the bed porosity than does the Kozeny-Carman model, making it much better suited for porosity optimization calculations.

Journal Article↗

Electrosmotic mobility and conductivity in columns for capillary electrochromatography.

Columns employed so far in capillary electrochromatography (CEC) contain both a packed and an open segment with concomitant changes of the electric field strength and the flow velocity at the interface of the two segments in such duplex columns. To take this into account in measuring, processing, and interpreting CEC data, a framework is presented for the evaluation of the conductivity ratio and the interstitial electrosmotic flow (EOF) mobility and their usage as tools for characterizing CEC columns. This is illustrated by experimental data obtained from measurement of the current and the EOF in capillary columns packed with different stationary phases. The current data yielded the ratio of the conductivities of the packed and open segments that has been shown to be useful for the evaluation of the porosity and tortuosity. It is assumed that these important packing characteristics are the same for the flow of current and for the flow of the bulk mobile phase in the CEC column. The EOF mobility in such duplex columns is defined in two different ways. The apparent mobility, which is widely reported at present, is obtained from the length of packed segment, the migration time, and the overall electric field strength. On the other hand, the actual mobility is obtained after taking into account the porosity and tortuosity of the packing as well. Thus, the actual mobility is made independent of the porosity and tortuosity and therefore can be useful to estimate the zeta potential for characterizing the packing surface. Measurements of both the apparent and actual electrosmotic mobilities for a number of different columns have shown that the apparent and actual mobilities are significantly different in their magnitude. For this reason, it is recommended that, instead of the apparent EOF mobility, the actual mobility is used for the characterization of the packing in CEC columns.

Chromatography, Liquid↗

Porous 3-D scaffolds from regenerated silk fibroin.

Three fabrication techniques, freeze-drying, salt leaching and gas foaming, were used to form porous three-dimensional silk biomaterial matrixes. Matrixes were characterized for morphological and functional properties related to processing method and conditions. The porosity of the salt leached scaffolds varied between 84 and 98% with a compressive strength up to 175 +/- 3 KPa, and the gas foamed scaffolds had porosities of 87-97% and compressive strength up to 280 +/- 4 KPa. The freeze-dried scaffolds were prepared at different freezing temperatures (-80 and -20 degrees C) and subsequently treated with different concentrations (15 and 25%) and hydrophilicity alcohols. The porosity of these scaffolds was up to 99%, and the maximum compressive strength was 30 +/- 2 KPa. Changes in silk fibroin structure during processing to form the 3D matrixes were determined by FT-IR and XrD. The salt leached and gas foaming techniques produced scaffolds with a useful combination of high compressive strength, interconnected pores, and pore sizes greater than 100 microns in diameter. The results suggest that silk-based 3D matrixes can be formed for utility in biomaterial applications.

Animals↗