Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyelectrolytes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,099 records · Page 61Linked to original sources
PubMed2000

Acid-base equilibria of polyvalent electrolytes and theoretical description of polyelectrolyte behavior in electrokinetic separations.

The problem of the theoretical description of the dissociation of polyvalent electrolytes is considered. It is shown that the traditional model which assumes some constant microstate mobility values may have limited applications, since for each microstate the rate of conversion into other states is strongly dependent on pH and thus it may often become comparable with the characteristic times of other important processes (ionic atmosphere relaxation, biopolymer acceleration by electric field). The question of correct modelling of the electrophoretic flux, electrophoretic mobility and conductivity is discussed.

Biopolymers↗
PubMed2001

Nanoparticles of a polyelectrolyte-fatty acid complex: carriers for Q10 and triiodothyronine.

Poly(ethylene imine) (PEI) was used for the complexation of dodecanoic acid (C12) resulting in a poly(ethylene imine) dodecanoate complex (PEI-C12) with a lamellar nanostructure and a repeat unit of 2.9 nm. PEI-C12 was doped with coenzyme Q10 and the hormone triiodothyronine as typical hydrophobic and pharmacological active compounds, respectively. The PEI-C12 acts as a guest matrix that dissolves both molecules up to weight uptakes of about 20% (w/w) and 15% (w/w), respectively, both without crystallization. Agglomerate-free dispersions of core-shell type nanoparticles were developed. Ratios of PEI to C12 of 2:1 or higher were found to be suitable for this purpose. The particles exhibit hydrodynamic diameters in the range of 80-150 nm, which depend on the preparation conditions. Each particle consists of a relatively compact core surrounded by a diffuse corona. PEI-C12 forms the core, while non-complexed PEI acts as a cationic-active dispersing agent. It was found that the nanoparticles show high zeta potentials (approximately +40 mV) and are stable in NaCl solutions at concentrations of up to 0.3 mol x l(-1). The stabilization of the nanoparticles results from a combination of ionic and steric contributions. A variation of the pH value was used to activate the dissolution of the particles. The PEI-C12 nanoparticles may have potential as carriers for hydrophobic drugs.

Coenzymes↗
PubMed1998

Absorption/release of polyvalent metal ions by a polyelectrolyte gel.

The swelling/contraction dynamics of a strongly charged gel immersed in a copper sulphate solution were studied. Changes in the size of the gel particle and the penetration of metal ions inside the network were monitored by optical microscopy. The equilibrium state was attained in two steps: First, the gel swells, mainly by absorbing water, and then it collapses, to the almost dry state. The release of copper ions from the contracted gel when it was placed in acidic medium was studied as a function of time using optical microscopy. The influence of the acid concentration on the rate of ion release and on changes in the particle size of the gel are discussed.

Adsorption↗
PubMed2000

The dielectric increments of aqueous polyelectrolyte solutions: a scaling approach

This paper deals with dielectric dispersion curves (covering a frequency range from a few Hz to 100 MHz) of Na-poly(styrene-sulfonate) of 65,000 < or = Mw < or = 1,060,000 g mol(-1) in aqueous solutions. The values of the low frequency (dielectric increment1) and high frequency (dielectric increment2) dielectric increments, obtained from the experimental curves matched to a superposition of two Cole-Cole equations, have been analyzed in terms of their concentration and molar mass dependence. The concentrations C (g l(-1)) of the various solutions were mostly situated in the transition regime defined by Odijk [T. Odijk, Macromolecules 12 (1979) 688] between the dilute regime (C < Cg*) and the semi-dilute one (C > C**), and wherein the characteristic concentration C* marks the onset of flexibility effects on the polyion behavior. It has been shown that in the concentration range Cg* < C < C** the increments in both frequency domains satisfy a scaling relation dielectric increment(j) = Bj M(nu j) (C/C*)(mu j) with molar mass independent exponents nu j and mu j changing around C*. Their values are different for dielectric increment1 and dielectric increment2, except for mu above C* where both increments appear to become concentration-independent. Below Cg*, in the dilute regime, the two dispersion domains seem to merge. The increment dielectric increment = relative permittivity (0) - high frequency limit of relative permittivity is molar mass independent if scaled to (C/Cg*). The molar mass dependence of the increments as a function of the macromolecular concentration rhoP, dielectric increment or dielectric increment(j) approximately Mgamma (rhoP)mu, also reveals differences between the different concentration regimes. Extrapolation from above Cg* to zero concentration is thus unjustified.

Journal Article↗
PubMed1997

Competitive electrostatic binding of charged ligands to polyelectrolytes: practical approach using the non-linear Poisson-Boltzmann equation.

We have developed a practical analytical treatment of the non-linear Poisson-Boltzmann (P-B) equation to characterize the strong but non-specific binding of charged ligands to DNA and other highly charged macromolecules. These reactions are notable for their strong salt dependence and anti-cooperativity, features which the theory fully explains. We summarize analytical results for concentration profiles and ion binding in various regimes of surface curvature and ionic strength, and show how counterion size and charge distribution may influence competitive binding. We present several practical applications of the formalism, showing how to estimate the ligand concentration needed to effectively compete with a given buffer salt, and how to calculate the amounts of counterion species bound at various distances from the DNA surface under given bulk solution conditions. We cast our results into the form of a Scatchard binding isotherm, showing how the apparent binding constant K(obs) and S = -dlog K (obs )d log[M (+)] can be predicted from the basic theory. Anti-cooperativity arises naturally without steric repulsion, and binding curves can be fitted with K(obs) and effective charge as the only free parameters. We extend the analytical P-B analysis to an arbitrary number of counterion species, and apply the results to fit and predict three-ion competition data.

Journal Article↗
PubMed2000

Evaluation of mucoadhesion for two polyelectrolyte gels in simulated physiological conditions using a rheological method.

A rheological method to measure mucoadhesion was evaluated for two ion-sensitive polymers, Carbopol 934 and Gelrite((R)) (deacetylated gellan gum), in a simulated physiological environment using two commercially available mucins. The method simulates the interpenetration layer in the mucoadhesion process. The elastic modulus for a polymer/mucin mixture is compared with the elastic modulus for the polymer alone, and an increase in the elastic modulus for the mixture compared to the polymer is interpreted as a positive interaction caused by mucoadhesion. In this study the influence of polymer concentration, type of mucin and experimental rheological factors, such as gap width, were examined. The choice of polymer concentration was crucial, especially with the porcine gastric mucin. We found that one is more likely to obtain positive interactions with weak gels. It was also shown that the choice of mucin has a large influence on the results obtained. Carbopol 934 interacted more strongly with the bovine submaxillary gland mucin than with the porcine gastric mucin, whereas the gel structure of Gelrite((R)) was destroyed when mixed with the bovine mucin. Furthermore, it was concluded that with hydrogels consisting of gel particles (such as Carbopol 934), rheological measurements can give highly varying results, depending on, for example, the concentration and ion-sensitivity of the polymer, the quantity of ions present, as well as the gap width of the measuring system.

Acrylic Resins↗
PubMed2003

A new assay format for electrochemical immunosensors: polyelectrolyte-based separation on membrane carriers combined with detection of peroxidase activity by pH-sensitive field-effect transistor.

A new rapid immunotechnique combining separation of reactants by filtration through a porous membrane and potentiometric detection of the bound enzyme label by a pH-sensitive field-effect transistor is proposed. The complexes to be detected are formed by the method described earlier in (Anal. Chem. 71 (1999) 3538), including a homogeneous binding of immunoreactants and a polyanion carrier (polymethacrylate) followed by heterogeneous separation on a membrane incorporating an immobilized polycation (poly-N-vinyl-4-ethylpyridinium). The proposed technique for a sensitive detection of peroxidase label is based on the measurement of pH changes in the optimised substrate solution containing o-phenylenediamine, hydrogen peroxide and ascorbic acid. The antigens studied were herbicide atrazine and hormone testosterone. Their specific detection is realised via competitive binding of free and peroxidase-labelled antigens by antibodies integrating with a (staphylococcal protein A-polyanion) conjugate. The total analysis time is 20-25 min. The range of quantitative detection is 0.2-100 ng ml(-1) for atrazine and 5-300 ng ml(-1) for testosterone. Data scatter of replicate tests varies from 3 to 10%. Application of protein A-polyanion conjugate allows to use the proposed protocol for different antigens without additional treatment of specific antisera.

Antigen-Antibody Complex↗
PubMed1998

Improved operational stability of biosensors based on enzyme-polyelectrolyte complex adsorbed into a porous carbon electrode.

A novel porous active carbon is utilized in order to adsorb the diethylaminoethyl-dextran (DEAE-dextran)-enzyme stabilized complexes, for the construction of highly stable biosensors. The interaction of DEAE-dextran with the examined enzymes increases dramatically the operational stabilization of the sensors, without adverse effects on the enzyme activity. At the same time, the porous active carbon allows for high enzyme loading, good electrical contact and low resistance throughout the sensing element. Glucose oxidase and horseradish peroxidase are used as model enzymes in this study to construct biosensors, with very good reproducibility (less than 5% RSD). As a result, the glucose sensor exhibits very long operational stability (over a period of 5 months), while the hydrogen peroxide sensor retains its initial activity after several weeks.

Biosensing Techniques↗
PubMed2001

Mammalian cell cultures on micropatterned surfaces of weak-acid, polyelectrolyte hyperbranched thin films on gold.

A four-step soft lithographic process based on micro-contact printing of organic monolayers, hyperbranched polymer grafting, and subsequent polymer functionalization results in polymer/n-alkanethiol patterns that direct the growth and migration of mammalian cells. The functional units on these surfaces are three-dimensional cell "corrals" that have walls 52+/-2 nm in height and lateral dimensions on the order of 60 microm. The corrals have hydrophobic, methyl-terminated n-alkanethiol bottoms, which promote cell adhesion, and walls consisting of hydrophilic poly(acrylic acid)/poly(ethylene glycol) layered nanocomposites that inhibit cell growth. Cell viability studies indicate that cells remain viable on the patterned surfaces for up to 21 days, and fluorescence microscopy studies of stained cells demonstrate that cell growth and spreading does not occur outside of the corral boundaries. This simple, chemically flexible micropatterning method provides spatial control over growth of IC-21 murine peritoneal macrophages, human umbilical vein endothelial cells, and murine hepatocytes.

Acrylic Resins↗
PubMed2000

Dynamic coating using polyelectrolyte multilayers for chemical control of electroosmotic flow in capillary electrophoresis microchips.

Poly(dimethylsiloxane) (PDMS) capillary electrophoresis (CE) microchips were modified by a dynamic coating method that provided stable electroosmotic flow (EOF) with respect to pH. The separation channel was coated with a polymer bilayer consisting of a cationic layer of Polybrene (PB) and an anionic layer of dextran sulfate (DS). According to the difference in charge, PB- and PB/ DS-coated channels supported EOF in different directions; however, both methods of channel coating exhibited a pH-independent EOF in the pH range of 5-10 due to chemical control of the effective zeta-potential. The endurance of the PB-coated layer was determined to be 50 runs at pH 3.0, while PB/DS-coated chips had a stable EOF for more than 100 runs. The effect of substrate composition and chip-sealing methodology was also evaluated. All tested chips showed the same EOF on the PB/DS-coated channels, as compared to uncoated chips, which varied significantly. No significant variation for separation and electrochemical detection of dopamine and hydroquinone between coated and uncoated channels was observed.

Journal Article↗
PubMed1999

Electrostatic immobilization of glucose oxidase in a weak acid, polyelectrolyte hyperbranched ultrathin film on gold: fabrication, characterization, and enzymatic activity.

In this paper we show that hyperbranched polymers can be used as a host matrix for electrostatic entrapment of enzymes. Specifically, amine-functionalized glucose oxidase (GOx+) and horseradish peroxidase, as well as poly(amidoamine) dendrimer-modified horseradish peroxidase, reversibly sorb into polyanionic, hyperbranched poly(sodium acrylate) (PAA-) films that are on the order of a few hundred angstroms thick. The quantity of GOx+ entrapped within the PAA- films depends on the nature of film preparation but is typically on the order of 0.06 unit/cm2. The extent to which entrapped GOx+ retains its activity depends on the film history, but for PAA-/GOx+ composites not exposed to glucose and stored at 4 degrees C, the original activity is retained for up to 68 days and perhaps longer.

Acrylates↗
PubMedDate not supplied

Polyelectrolyte vectors for gene delivery: influence of cationic polymer on biophysical properties of complexes formed with DNA.

Cationic polymer/DNA complexes are widely used for gene delivery, although the influence of the cationic polymer on the biophysical properties of the resulting complex is poorly understood. Here, several series of cationic polymers have been used to evaluate the influence of structural parameters on properties of DNA complexes. Parameters studied included the length of side chain, charge type (primary versus tertiary and quaternary), polymer molecular weight, and charge spacing along the polymer backbone. Cationic polymers with short side chains (such as polyvinylamine) formed small complexes, resistant to destabilization by polyanions, with low surface charge, limited transfection activity, and efficient intranuclear transcription. Conversely, cationic polymers with long side chains (e.g., poly[methacryloyl-Gly-Gly-NH-(CH(2))(6)-NH(2))] showed inefficient complex formation, high positive surface charge, and better transfection activity. The effects of molecular weight varied between polymers, for example, low molecular weight poly(L-lysine) produced relatively small complexes, whereas low molecular weight poly[2-(trimethylammonio)ethyl methacrylate chloride] produced large aggregates. Polymers containing quaternary ammonium groups showed efficient complex formation but poor transfection. Finally, spreading charges widely on the polymer structure inhibited their ability to condense DNA. In summary, to achieve small, stable complexes, the use of cationic polymers with short side chains bearing primary amino groups is suggested.

Animals↗
PubMedDate not supplied

Improvement of stability and cell adhesion properties of polyelectrolyte multilayer films by chemical cross-linking.

Poly(L-lysine)/hyaluronan (PLL/HA) films were chemically cross-linked with a water soluble carbodiimide (EDC) in combination with a N-hydroxysulfo-succinimide (NHS) to induce amide formation. Fourier transform infrared spectroscopy confirms the conversion of carboxylate and ammonium groups into amide bonds. Quartz crystal microbalance-dissipation reveals that the cross linking reaction is accompanied by a change in the viscoelastic properties of the films leading to more rigid films. After the cross-linking reaction, both positively and negatively ending films exhibit a negative zeta potential. It is shown by fluorescence recovery after photobleaching measured by confocal laser scanning microscopy that cross-linking dramatically reduces the diffusion of the PLL chains in the network. Cross linking also renders the films highly resistant to hyaluronidase, an enzyme that naturally degrades hyaluronan. Finally, the adhesion of chondrosarcoma cells on the films terminating either with PLL or HA is also investigated. Whereas the non cross-linked films are highly resistant to cell adhesion, the cells adhere and spread well on the cross-linked films.

Cell Adhesion↗