Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Styrenes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
PubMed2001

Denitrification with acrylamide by pure culture of bacteria isolated from acrylonitrile-butadiene-styrene resin manufactured wastewater treatment system.

Acrylamide is widely used in industrial applications as cement binder and solidification agent. Due to its carcinogenicity and toxicity, discharge of acrylamide to the natural water and soil systems may lead to an adverse environmental impact on water quality and thus endanger public health and welfare. This study attempts to isolate and identify the denitrifying bacteria, which utilize acrylamide as the substrate from the acrylonitrile-butadiene-styrene resin manufactured wastewater treatment system. The performance of the denitrifying bacteria for treating different initial acrylamide concentrations was also investigated under aerobic and anaerobic conditions. The test results indicated that the Pseudomonas stutzeri could remove acrylamide at concentrations below 440 mg/l under aerobic conditions. The acrylic acid and ammonia intermediates were used as carbon and nitrogen sources, respectively. However, P. stutzeri did not show the capability of metabolizing acrylonitrile under aerobic conditions. Furthermore, the P. stutzeri could utilize both acrylamide and acrylic acid in the presence of nitrate (denitrification) and acrylamide could be removed completely from the wastewater.

Acrylamide↗
PubMed1986

Analysis of chlorinated styrenes in environmental samples using negative ion chemical ionization mass spectrometry.

A method for the separation and identification of chlorinated styrene isomers with fully chlorinated aromatic nuclei in environmental samples is presented. Gas chromatography combined with negative ion chemical ionization mass spectrometry is used. The method has been applied to a combined fish liver and filét extract. All the possible chlorostyrenes with fully chlorinated aromatic nuclei were detected in the sample.

Animals↗
PubMed2001

Blends of isoprene-styrene/methacrylate monomer systems as denture soft lining material.

This work further develops the concept of using an elastomer gelled with methacrylate monomers to produce a methacrylate-based soft lining material without the use of a plasticizer. An isoprene-styrene (SIS) block copolymer was mixed with methyl methacrylate (MMA) and 1,6-hexandiol dimethacrylate (HDMA). The HDMA was used as a cross-linking agent. The elastomer/monomer ratios were maintained at 50/50 whereas the monomers ranged from 0 to 100%) HDMA. Mechanical properties and water absorption/desorption characteristics were used to assess the effect of varying the monomer compositions. The results indicated that phase separation took place, in particular at high HDMA content. This significantly increased the Young's modulus and decreased the elongation to break. Generally, the water uptake tended to decrease with increasing HDMA content, reflecting the effect of modulus. Second absorption cycles gave higher uptake values compared to the first. Formulations with a high amount of HDMA gave materials with modulus values too high for soft lining applications. This suggests that the optimum formulation requires a compromise between modulus and water uptake.

Absorption↗
PubMed2001

Denitrification with acrylonitrile as a substrate using pure bacteria cultures isolated from acrylonitrile-butadiene-styrene wastewater.

This study attempted to isolate and identify the denitrifying bacteria that utilize acrylonitrile as a substrate from acrylonitrile-butadiene-styrene (ABS) resin wastewater. The performance of the denitrifying bacteria for treating different initial acrylonitrile concentrations was also investigated under anoxic conditions. The results showed that seven strains of denitrifying bacteria that can use acrylonitrile or acrylic acid as a substrate were isolated from the denitrification tank of a wastewater treatment plant in a ABS resin manufacturing plant and a lab-scale anoxic granular activated carbon-fluidized bed. The bacteria strains Acidovorax facilis B and Pseudomonas nautica could utilize acrylonitrile up to 279 mg/l as a substrate for denitrification. For complete nitrate removal, an adequate supply of acrylonitrile was necessary. Under the assumption that the acrylic acid would be completely removed, the removal of 1 mg/l nitrate by A. facilis B or P. nautica, about 0.64-0.74 mg/l acrylonitrile or 0.87-1 mg/l acrylic acid was needed. Because strains A. facilis B and P. nautica could utilize acrylonitrile for denitrification, they are expected to play an important role in the treatment of acrylonitrile in the wastewater treatment plant (denitrification and nitrification processes) and lab-scale granular activated carbon-fluidized bed.

Acrylates↗
PubMed2003

Evaluation of styrene-acrylonitrile copolymerization thermal stability and runaway behavior.

Evaluation of thermal stability and runaway behavior of any exothermic chemical system is of great importance for the design and operation of a chemical process. The evaluation process should be based on a thorough investigation of the reaction chemistry including reaction pathways, thermodynamic, and kinetic parameters. When addressing the reactivity hazards of any reacting system, the dominant pathway(s) should be identified. Identifying the main reaction pathway under specific conditions will lead to a better thermodynamic and kinetic characterization of the reacting system. In this article, the thermal stability and runaway behavior of styrene-acrylonitrile copolymerization reaction system in bulk is evaluated. Traditional thermal analysis techniques (calorimetric analysis) are combined with computational quantum chemistry methods and empirical thermodynamic-energy correlations. Reaction pathways are identified from the theoretical approach and verified by experimental measurements. The results of this analysis are compared to literature data for this system.

Acrylonitrile↗
PubMed1999

Simultaneous determination of the urinary metabolites of toluene, xylene and styrene using high-performance capillary electrophoresis. Comparison with high-performance liquid chromatography.

A simple and rapid method using high-performance capillary electrophoresis (HPCE) for the simultaneous determination of the urinary metabolites of toluene, xylene and styrene, plus creatinine and uric acid in human urine specimens and standard solutions is described. The compounds were well separated from each other on a fused-silica capillary utilizing a 20 mM sodium tetraborate buffer (pH 9.65) with 15 mM beta-cyclodextrin and UV detection at 200 and 225 nm. The total analysis time was less than 6 min per sample. The capillary zone electrophoresis (CZE) method shows a good correlation with the high-performance liquid chromatography (HPLC) method with respect to urinary hippuric acid concentrations in the urine specimens of subjects exposed to the vapors of a solvent mixture of toluene and xylene. In comparing these two techniques, HPCE was found to be superior to HPLC because the analysis time is shorter, and the separation of m-MHA and p-MHA takes a long time with HPLC.

Calibration↗
PubMedDate not supplied

Effects of prenatal and postnatal exposure to styrene dimers and trimers on reproductive function in rats.

Styrene dimers and trimers (SDT) were evaluated for reproductive toxicity in Sprague-Dawley rats. SDT was administered orally to rats at doses of 0, 0.04, 0.2, and 1.0 mg/kg from day 6 of gestation through day 21 after delivery. Clinical signs, including pregnancy and lactation, and changes in body weight and food consumption were assessed. All dams underwent a gross necropsy examination. The brain, liver, kidney, ovary, uterus, thyroid gland, and pituitary were weighed. Offspring were evaluated for the effects of the test compound on viability, growth, anogenital distance, preputial separation and vaginal opening, behavioral function, estrous cycling, mating, and fertility. There were no test compound-related clinical signs or effects on body weight or food consumption in dams during any phase of the study. In addition, no abnormalities in delivery or lactation, including gestation length, were noted in any dam. No dose-dependent changes were observed in pup viability or growth. There were no adverse effects of SDT on any developmental landmark, learning, memory, or estrous cycling in offspring. The number of days to inseminations in the 0.2 mg/kg group was significantly greater than that in the control group, but was independent of dose. No test compound-related necropsy findings were seen in either the dams or the offspring. No compound-related histopathologic findings were noted in the reproductive tissues of either the male or female offspring. No compound-related alterations in sperm motion or density were detected in the offspring. Thyroid stimulating hormone levels in the male offspring of the 0.2 mg/kg and 1.0 mg/kg groups were significantly higher than those in the controls, whereas thyroid hormone (T(3), T(4)) levels in these groups were comparable to the controls. In addition, the thyroid glands of males in all groups were similar histologically. These results indicate that SDT administered at doses as high as 1.0 mg/kg (1000 times the estimated human daily intake) did not produce reproductive toxicity in dams or offspring.

Animals↗
PubMed2003

Chemical modification of rubber wood with styrene in combination with a crosslinker: effect on dimensional stability and strength property.

Chemical modification of rubber wood (Hevea Brasiliensis) was carried out by impregnating the wood with styrene and in combination with a crosslinker Glycidyl Methacrylate (GMA). Polymerization was carried out by catalyst heat treatment. The dimensional stability in terms of % volumetric swelling and anti-shrink efficiency was determined and found to be improved on treatment. Water absorption was also found to be decreased considerably for treated wood samples. Mechanical strength of the treated samples in terms of modulus of rupture and modulus of elasticity were also found to be improved. The wood polymer interaction was confirmed by FT-IR spectroscopy. Biodegradability of the wood/polymer composites was determined and found to be improved on treatment with styrene/styrene-GMA.

Absorption↗
PubMed2006

An improved approach for accurate quantitation of benzene, toluene, ethylbenzene, xylene, and styrene in blood.

Widespread exposure to benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS) and the potential for this exposure to cause health effects drives the need to develop improved methods for measuring exposure. In this work, we demonstrate our latest assay for quantifying BTEXS in blood and characterize sources of both positive and negative biases. This method involves blood sample collection using common techniques followed by static headspace sampling using solid-phase microextraction and gas chromatography/mass spectrometry analysis. We found that the greatest and unexpected source of positive bias was from contamination of butyl rubber materials used in sample preparation consumables such as Vacutainer stoppers, syringe plungers, and sample vial septa. Conversely, the primary cause of negative bias observed was from the diffusion loss of BTEXS from blood during transfer into sample vials. By minimizing or eliminating these and other sources of bias, we improved method accuracy and precision to within 10% while maintaining low-picogram per milliliter detection. Furthermore, upon comparison of these results with those from other laboratories, we observe substantially lower blood BTEXS levels reported to date for nonoccupationally exposed nonsmokers. A relatively unbiased method, as such, will help elucidate any potential associations between adverse health effects and human exposure to low levels of BTEXS.

Benzene↗
PubMedDate not supplied

QSRR correlation of free-radical polymerization chain-transfer constants for styrene.

Quantitative structure-reactivity relationships (QSRR) are deduced for kinetic chain-transfer constants for 90 agents on styrene polymerization at 60 degrees C. Three- and five-parameter correlations were obtained with R2 of 0.725 and 0.818, respectively. The descriptors involved in the correlations are consistent with the proposed mechanism of the chain-transfer reactions.

Free Radicals↗
PubMed2005

Discovery of and mechanistic insight into a ligand-modulated palladium-catalyzed Wacker oxidation of styrenes using TBHP.

We describe the discovery of a new N-heterocyclic carbene-modulated Pd catalyst for the Wacker oxidation that does not require molecular oxygen but instead uses TBHP as a reagent in this oxidation. The catalyst activity and selectivity for the oxidation of styrene derivatives to methyl ketones are among the best reported. Preliminary mechanistic studies of the catalytic system were performed and show that the origin of the carbonyl oxygen is TBHP and that the hydrogens in the product all originate from the starting olefin.

Catalysis↗
PubMed2006

Palladium(II)-catalyzed aerobic hydroalkoxylation of styrenes containing a phenol.

An intermolecular Pd-catalyzed hydroalkoxylation of styrenes that contain a phenol is presented. The reaction can be performed on terminal, disubstituted, and trisubstituted olefins in a variety of alcoholic solvents. Initial mechanistic data suggest a mechanism that involves oxidation of the alcoholic solvent to provide a Pd-hydride that inserts into an olefin. This is followed by formation of a quinone methide and subsequent addition of an alcohol to yield the hydroalkoxylated product.

Alkenes↗
PubMed2001

Identification, determination, and biological evaluation of a novel styrene trimer contained in polystyrene food containers. 2.

An unidentified styrene trimer (ST) isolated from the acetonitrile extract of polystyrene (PS) food containers was characterized as (1S*,6R*,7S*,8S*,11R*)-6,11-diphenyltricyclo[6,2,2,0(2,7)]dodeca-2,9-diene. The content and migration of this compound in PS food containers were determined by GC-MS (SIM). Furthermore, an endocrine-disrupting effect was tested using in vitro and in vivo assays of the compound. In conclusion, it seems that the compound does not present the effect.

Animals↗
PubMed1999

Recovery of hesperidin from orange peel by concentration of extracts on styrene-divinylbenzene resin.

This paper describes a new procedure for obtaining hesperidin from the waste orange peel of the citrus industry. It is based on the adsorption of dilute extracts of hesperidin on a styrene-divinylbenzene (SDVB) resin and the desorption in much more reduced volumes by means of alkaline eluents. Hesperidin immediately precipitates with good yield and high purity after acidification of the concentrated solutions, thus overcoming disadvantages due to the high dilution. Different experiments were carried out to examine operating conditions in each phase of the process. Hesperidin was extracted from peel with an aqueous saturated Ca(OH)(2) solution, allowing precipitation of calcium pectates from colloidal pectins that can interfere in the subsequent phases of adsorption and separation of hesperidin. The clear extracts were neutralized to optimize adsorption on resin. The most effective eluent was 0.5 N NaOH solution containing 10% ethanol. Recycling of the crystallization liquor improved the yield and purity of the product and reduced the acid amount required for neutralizing fresh alkaline extracts. Resin must be washed after each adsorption-desorption cycle and regenerated after five cycles. Results can constitute a useful starting point for an industrial application. A flow scheme of the process is also reported.

Adsorption↗
PubMed2002

Synthesis and application of arylmonophosphinoferrocene ligands: ultrafast asymmetric hydrosilylation of styrene.

A short and efficient synthetic route to a novel class of atropisomeric and planar chiral 2-aryl-1-diphenylphosphanylferrocene ligands is presented. The modular design of the ligands allows a synthetic approach in which both the aromatic moiety and the phosphino substituent can be varied easily. This permits fine-tuning of steric and electronic properties. The ligands have been tested in the asymmetric hydrosilylation of styrene where enantioselectivities up to 90% are obtained. Optimization of the palladium-to-ligand ratio resulted in hitherto unparalleled turnover frequencies (TOF) exceeding 180 000 h(-1). The absolute stereochemistry of the ligands was determined from an X-ray structure. 2D NMR experiments in combination with ab initio calculations were used to assign the conformation of the atropisomeric biarylic scaffold.

Catalysis↗