Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Populus”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources

Characterization and spatial distribution of ectomycorrhizas colonizing aspen clones released in an experimental field.

Ectomycorrhizas (EM) from aspen clones released on an experimental field were characterized by morphotyping, restriction analysis and internal transcribed spacer (ITS) sequencing. In addition, their community structure and spatial distribution was analyzed. Among the 23 observed morphotypes, six mycobionts dominated, forming roughly 90% of all ectomycorrhizas: Cenococcum geophilum, Laccaria sp., Phialocephala fortinii, two different Thelephoraceae, and one member of the Pezizales. The three most common morphotypes had an even spatial distribution, reflecting the high degree of homogeneity of the experimental field. The distribution of three other morphotypes was correlated with the distances to the spruce forest and deciduous trees bordering the experimental field. These two patterns allowed two invasion strategies of ectomycorrhizal fungi (EMF) to be recognized, the success of which depends on adaptation of the EMF to local ecological conditions.

Agaricales↗

Wound and insect herbivory responsive genes in poplar.

Insect herbivory leads to induced resistance to subsequent infestations in plants. This is due in part to feeding-induced expression of genes that can lead to reduced palatability and/or digestibility of the plant material. We identified 57 distinct differentially expressed genes from poplars that were either infested by gypsy moth (Lymantria dispar) or mechanically wounded. Eleven highly insect-inducible genes were also found to be wound-inducible. Time course analysis revealed diverse timing of peak transcript accumulation. Sequence analysis of promoters suggested that the wound responsive elements, W and DRE, and the jasmonic acid responsive H motif, are over-represented in wound-induced poplar promoters and should be investigated further.

Animals↗

Application of a dialysis sampler to monitor phytoremediation processes.

A cylindrical dialysis sampler (1.2 m in length; 5 cm in diameter) was designed and constructed to sample small-scale phytoremediation processes in the root zone of poplar trees. The study site was a 183-tree plantation of hybrid poplars located at Aberdeen Proving Ground, Maryland, at the J-Field Area of Concern. The grove was planted in 1996 to intercept a chlorinated solvent plume containing 1,1,2,2-tetrachloroethane (1,1,2,2-TeCA, trichloroethene (TCE) and daughter products. Two dialysis samplers were installed: one directly in the poplar grove (approximately 0.3 m from the trunk of a mature tree) and the other outside of the grove but in the plume. Data collected included concentrations of chlorinated VOCs, organic acids, chloroacetic acids, Cl-, and dissolved gases (ethane, ethene, CH4, CO2). At the control location, the VOC profile was dominated by cis-1,2-dichloroethene (cis-1,2-DCE) and trans-1,2-dichloroethene (trans-1,2-DCE) with concentrations ranging from 0.88-4.5 to 4.4-17.6 mg/L, respectively. Concentrations of VOCs were similar across the vertical profile. At the tree location, 1,1,2,2-TeCA and TCE were the dominant VOCs detected but as opposed to the control location were highly variable within the root zone, with the greatest variability associated with locations in the sampler where roots were observed. This highly variable profile at the tree location is indicative of VOC rhizosphere biodegradation and uptake near the active roots. This variability appears to be on the centimeter scale, emphasizing the importance of these high-resolution samplers for the study of rhizosphere influences.

Acetates↗

How many samples are required? Evaluating a model for verification of carbon sequestration in a hybrid poplar buffer strip.

A model is developed to predict annual and total above-ground carbon storage within a hybrid poplar stream buffer. The regression model predicts tree wet weight based upon circumference at breast-height (137 cm) with an r-square value of 0.9922. Carbon storage in above-ground biomass is estimated to be 3.57 to 3.71 metric tons per hectare, with a measured annual increment of 0.92 to 1.37 metric ton per hectare per year. The variability of carbon storage within this biological system, including soil organic matter, is explored, and the number of samples required to achieve a desired level of statistical certainty are predicted. As has been investigated previously for other biological systems (Garten and Wullschleger, 1999), the study shows that a prohibitively large number of samples must be taken in order to achieve high degrees of certainty about mean carbon storage values. The study also shows, however, that mean values with somewhat greater uncertainties can easily be achieved with much smaller sample sizes. Thus carbon sequestration verification might be accomplished cost-effectively if the degree of certainty required is not unrealistically high for highly variable natural systems.

Carbon↗

MYB transcription factors are differentially expressed and regulated during secondary vascular tissue development in hybrid aspen.

More than 120,000 poplar ESTs have been sequenced from 20 different cDNA libraries by the Swedish Centre for Tree Functional Genomics. We screened this EST collection for MYB transcription factors involved in secondary vascular tissue formation, and genes assigned as PttMYB3Ra, PttMYB4a and PttMYB21a were selected for further characterisation. Three MYB genes showed different expression patterns in various organs, tissues and stem sub-sections representing different developmental stages of vascular tissue formation. Furthermore, the analysis showed that PttMYB21a expression was much higher in secondary cell wall formation zone of xylem and phloem fibers than in other developmental zones. Transgenic hybrid aspen plants, expressing the 3'-part of the PttMYB21a gene in antisense orientation were generated to assess the function of PttMYB21a gene in vascular tissue formation and lignification. All transgenic lines showed reduced growth and had fewer internodes compared to the wild-type. The analysis of selected lines showed that acid soluble lignin present in the bark was higher in transgenic lines as compared to wild-type plants. Moreover a higher transcript level of caffeoyl-CoA 3-O-methyltransferase [CCoAOMT]; EC 2.1.1.104) was found in the phloem of the transgenic plants, suggesting that PttMYB21a might function as a transcriptional repressor.

Amino Acid Sequence↗

Toward a blueprint for UDP-glucose pyrophosphorylase structure/function properties: homology-modeling analyses.

UDP-glucose pyrophosphorylase (UGPase) is an important enzyme of synthesis of sucrose, cellulose, and several other polysaccharides in all plants. The protein is evolutionarily conserved among eukaryotes, but has little relation, aside from its catalytic reaction, to UGPases of prokaryotic origin. Using protein homology modeling strategy, 3D structures for barley, poplar, and Arabidopsis UGPases have been derived, based on recently published crystal structure of human UDP-N-acetylglucosamine pyrophosphorylase. The derived 3D structures correspond to a bowl-shaped protein with the active site at a central groove, and a C-terminal domain that includes a loop (I-loop) possibly involved in dimerization. Data on a plethora of earlier described UGPase mutants from a variety of eukaryotic organisms have been revisited, and we have, in most cases, verified the role of each mutation in enzyme catalysis/regulation/structural integrity. We have also found that one of two alternatively spliced forms of poplar UGPase has a very short I-loop, suggesting differences in oligomerization ability of the two isozymes. The derivation of the structural model for plant UGPase should serve as a useful blueprint for further function/structure studies on this protein.

Alternative Splicing↗

Measuring photosynthetic parameters at a distance: laser induced fluorescence transient (LIFT) method for remote measurements of photosynthesis in terrestrial vegetation.

We have developed a laser induced fluorescence transient (LIFT) technique and instrumentation to remotely measure photosynthetic properties in terrestrial vegetation at a distance of up to 50 m. The LIFT method uses a 665 nm laser to project a collimated, 100 mm diameter excitation beam onto leaves of the targeted plant. Fluorescence emission at 690 nm is collected by a 250 mm reflective telescope and processed in real time to calculate the efficiency of photosynthetic light utilization, quantum efficiency of PS II, and the kinetics of photosynthetic electron transport. Operating with peak excitation power of 125 W m-2, and duty cycle of 10-50%, the instrument conforms to laser safety regulations. The LIFT instrument is controlled via an Internet connection, allowing it to operate from remote locations or platforms. Here we describe the theoretical basis of the LIFT methodology, and demonstrate its applications in remote measurements of photosynthetic properties in the canopy of cottonwood and oak trees, and in the rosette of Arabidopsis mutants.

Fluorescence↗

The transgenic Vip3A poplar plant confers high resistance against Hyphantria cunea Drury.

Poplar is severely damaged by Hyphantria cunea (fall webworm), which significantly reduces tree productivity. However, conventional pest management methods are largely ineffective against fall webworm infestation. In this study, we demonstrated that the Vip3A protein possesses high insecticidal activity against H. cunea by overexpressing a synthetic THI1-Vip3A gene in poplar plants. A dicot codon-optimized Vip3A gene, fused with the THI1 chloroplast signal peptide sequence, was chemically synthesized and introduced into the poplar cv. '741' genome via Agrobacterium-mediated transformation. PCR, RT-PCR, and ELISA analyses confirmed the integration and successful expression of the transgene at both the mRNA and protein levels. The Vip3A protein concentration in chloroplasts was approximately 4.8-fold higher than in the whole leaf extract, indicating that the Vip3A protein was successfully targeted to and accumulated within the chloroplasts by the THI1 signal peptide. Subsequently, four transgenic lines with high Vip3A expression were subjected to H. cunea infestation. Compared to wild-type plants, these four transgenic lines exhibited significantly higher resistance, resulting in pest mortality rates exceeding 95% and significantly reduced leaf damage. Together, these results indicate that Vip3A possesses high insecticidal activity against H. cunea. Therefore, transgenic THI1-Vip3A poplar plants can serve as valuable germplasm for breeding poplar cultivars with high resistance to H. cunea infestation.

Plants, Genetically Modified↗

Experimental and numerical study of the poplar plastocyanin isoforms using Tyr as a probe for electrostatic similarity and dissimilarity.

A detailed study of the tyrosine spectral characteristics was carried out in a broad range of pHs for both isoforms of plastocyanin from poplar. It was found that Tyr 80 is always protonated while Tyr 83 can form a tirosinate at high pHs. The pK(a) of Tyr 83 is practically identical in plastocyanin a and b, but the quenching of its spectrum is different in the isoforms. This provides insights that the acidic patches surrounding Tyr 83 have different electrostatic properties in plastocyanin a and b. The protonation states and the electrostatic interactions were numerically modeled on the existing plastocyanin a structure and on a homology model of plastocyanin b. The results of numerical calculations agree with the experimental findings and identify several differences in the titration behavior of the acidic patches. The difference of the tyrosine quenching pH profiles of the isoforms is rationalized by the differences in the calculated pK(a)'s of amino acids in the neighboring acidic clusters.

Acrylamide↗

Comparative study of the stability of poplar plastocyanin isoforms.

The stability of the two isoforms of poplar plastocyanin (PCa and PCb) was studied with differential scanning calorimetry (DSC) technique. It was shown that the thermal unfolding of both isoforms is an irreversible process with two endothermic and one exothermic peaks. The melting temperature of PCb was found to be 1.3+/-0.2 K degrees higher than of PCa, which indicates that PCb is more stable. The enthalpy of unfolding was estimated from the heat capacity curves and was found to be significantly higher for PCb at salt concentration I=0.1 M. In addition, PCb unfolding enthalpy and melting temperature are much more sensitive to the changes in the salt concentration as found in the experiments done at different ionic strength. The experiments were complemented with numerical calculations. The salt effect on the stability was modeled using the X-ray structure of PCa and a homology modeled structure of PCb. It was found, in agreement with the experimental data, that the stability of PCb changes by 4.7 kJ more than PCa, as the salt concentration increases from zero to 0.1 M. Thus, the differences in only 12 amino acid positions between "a" and "b" isoforms result in a measurable difference in the folding enthalpy and a significant difference in the salt dependence. The optimization of the electrostatic energies of PCa and PCb were studied and it was shown that PCb is better electrostatically optimized.

Plastocyanin↗

Engineering functional artificial hybrid proteins between poplar peroxiredoxin II and glutaredoxin or thioredoxin.

The existence of natural peroxiredoxin-glutaredoxin hybrid enzymes in several bacteria is in line with previous findings indicating that poplar peroxiredoxin II can use glutaredoxin as an electron donor. This peroxiredoxin remains however unique since it also uses thioredoxin with a quite good efficiency. Based on the existing fusions, we have created artificial enzymes containing a poplar peroxiredoxin module linked to glutaredoxin or thioredoxin modules. The recombinant fusion enzymes folded properly into non-covalently bound homodimers or homotetramers. Two of the three protein constructs exhibit peroxidase activity, a reaction where the two modules need to function together, but they also display enzymatic activities specific of each module. In addition, mass spectrometry analyses indicate that the Prx module can be both glutathiolated or overoxidized in vitro. This is discussed in the light of the Prx reactivity.

Amino Acid Sequence↗

Screening of poplar biomass for bio-active compounds: a simple method to assess antioxidant activity.

Poplar bud resinoids are a potential source of natural antioxidants. As poplar culture today involves many hybrids, a simple screening test to assess antioxidant properties was proposed. This method used the second derivative of the UV spectra at 233 nm of the iron induced peroxidienes resulting from linoleic acid peroxidation. Kinetic data showed a lag period followed by a quadratic increase in peroxidienes. These two phases were more clearly separated using the square root of the data. An acceptable linear fitting of the length of the lag phase with antioxidant concentration was observed. Calibrating the experimental test with BHA therefore allowed an antioxidant assessment as "BHA equivalent". First results clustered well with taxonomic data, with typically 0.5, 0.15 and 0.08 "BHA equivalent" for P. nigra, P. X euramericana and P. X interamericana, respectively.

Antioxidants↗

Early growth response of container-grown selected woody boreal seedlings in amended composite tailings and tailings sand.

Successful reclamation of saline-alkaline sites may be enhanced by revegetating with species that are tolerant to factors that limit normal plant growth. Boreal woody plants tested in this study have shown promise for use in saline habitats. This study was conducted to assess the effects of amendment treatments (peat, pulp waste, agriboost, a combination of pulp waste and fly ash, and mineral fertilizer) on the early growth of three hybrid poplar clones and three coniferous species. Twelve-week and 18-week container-grown hybrid poplar clones and coniferous species, respectively, were monitored for 12 weeks in pot culture in both composite tailings (CTs) and tailings sand (TS) materials obtained from the oil sands plant, Syncrude Canada Ltd., Ft. McMurray, Alberta. These substrates with low nutrients, organic matter, and water-holding capacities, were amended with different organic materials at different rates. Growth, as assessed by the volume increment in both substrates, was generally better for the first 6 weeks than for the last 6 weeks. Growth was reduced during the last 6 weeks due to nutrient depletion over time in these impoverished substrates. Overall, for both substrates, the mineral fertilizer, 20%, 40% and 60% peat were the best amendments treatments for poplar clones with NM-6 being the most productive clone. For coniferous species, 20% and 40% pulp or peat appear to be the best amendment treatments, with lodgepole pine being the most productive species. The inflexion point of the regression functions were found around 30% rate of the amendment materials. The results also indicated that peat and pulp waste were the best amendment treatments for both hybrid poplars and coniferous species whereas the agriboost and mix (combination of pulp waste and fly ash) were the worst.

Canada↗

Phosphate removal by refined aspen wood fiber treated with carboxymethyl cellulose and ferrous chloride.

Biomass-based filtration media are of interest as an economical means to remove pollutants and nutrients found in stormwater runoff. Refined aspen wood fiber samples treated with iron salt solutions demonstrated limited capacities to remove (ortho)phosphate from test solutions. To provide additional sites for iron complex formation, and thereby impart a greater capacity for phosphate removal, a fiber pretreatment with an aqueous solution of a non-toxic anionic polymer, carboxymethyl cellulose (CMC), was evaluated. Problems with excessive viscosities during the screening of commercially available CMC products led to the selection of an ultra low viscosity CMC product that was still usable at a 4% concentration in water. Soxhlet extractions of chipped aspen wood and refined aspen wood fiber samples showed a higher extractives content for the refined material. Analysis of these extracts by FTIR spectroscopy suggested that the higher extractives content for the refined material resulted from the fragmentation of cell wall polymers (e.g., lignin, hemicelluloses) normally insoluble in their native states. Spectroscopic analysis of CMC and ferrous chloride treated fibers showed that the complex formed was sufficiently stable to resist removal during subsequent water washes. Equilibrium sorption data, which fit better with a Freundlich isotherm model than a Langmuir isotherm model, showed that phosphate removal could be enhanced by the CMC pretreatment. Results suggest that the process outlined may provide a facile means to improve the phosphate removal capacity of biomass-based stormwater filtration media.

Adsorption↗

Adsorption of heavy metals from electroplating wastewater by wood sawdust.

Poplar wood sawdust was examined for adsorption as a replacement for current, more expensive methods of removing copper, zinc and cadmium from electroplating wastewater. Langmuir, Freundlich, BET and competitive Langmuir (two competing ions) isotherms were fitted to experimental data and the goodness of their fit for adsorption was compared. The shapes of isotherms obtained fitted well with multilayer adsorption. This was established and confirmed through solid correspondence between the BET equation and experimental data, in contrast to an observed monolayer adsorption of metal ions on poplar sawdust in single metal-water solutions. The adsorption of copper ions from a mixture (in wastewater) was better than that from a single metal solution. The adsorptions of zinc ions from wastewater and from model water were approximately equal, while that of cadmium ions was significantly lower from the wastewater than from model water. The aforementioned suggests that the presence of other ions in wastewater hindered adsorption of cadmium ions.

Adsorption↗

Lignin depolymerization/repolymerization and its critical role for delignification of aspen wood by steam explosion.

Steam explosion is an important process for the fractionation of biomass components. In order to understand the behaviour of lignin under the conditions encountered in the steam explosion process, as well as in other types of steam treatment, aspen wood and isolated lignin from aspen were subjected to steam treatment under various conditions. The lignin portion was analyzed using NMR and size exclusion chromatography as major analytical techniques. Thereby, the competition between lignin depolymerization and repolymerization was revealed and the conditions required for these two types of reaction identified. Addition of a reactive phenol, 2-naphthol, was shown to inhibit the repolymerization reaction strongly, resulting in a highly improved delignification by subsequent solvent extraction and an extracted lignin of uniform structure.

Biomass↗

Thermal stability of wild type and disulfide bridge containing mutant of poplar plastocyanin.

A comparative study of the thermal stability of wild type poplar plastocyanin and of a mutant form containing a disulfide bridge between residues 21 and 25 was performed using differential scanning calorimetry and optical spectroscopic techniques. For wild type plastocyanin the transition temperature, determined from the calorimetric profiles, is 62.7 degrees C at the scan rate of 60 degrees C/h, whereas for the mutant it is reduced to 58.0 degrees C. In both cases, the endothermic peak is followed by an exothermic one at higher temperatures. The unfolding process monitored by optical absorption at 596 nm also reveals a reduced thermal stability of the mutated plastocyanin compared to the wild type protein, with transition temperatures of 54.8 and 58.0 degrees C, respectively. For both proteins, the denaturation process was found to be irreversible and dependent on the scan rate preventing the thermodynamic analysis of the unfolding process. In parallel, small conformational changes between wild type and mutant plastocyanin emerge from fluorescence spectroscopy measurements. Here, a difference in the interaction of the two proteins between the microenvironment surrounding the fluorophores and the solvent was proposed. The destabilization observed in the disulfide containing mutant of plastocyanin suggests that the double mutation, Ile21Cys and Glu25Cys, introduces strain into the protein which offsets the stabilizing effect expected from the formation of a covalent crosslink.

Calorimetry, Differential Scanning↗

Removal of aqueous-phase polynuclear aromatic hydrocarbons using aspen wood fibers.

Roadway runoff derived polynuclear aromatic hydrocarbons (PAHs) impact the quality of surface and ground water. Inexpensive aspen wood fibers have been investigated as a means to remove dissolved PAH under laboratory conditions. Our isotherm experiments demonstrated that the uptake of naphthalene, fluorene, anthracene, and pyrene required up to 12.5 days to reach equilibrium. Aspen wood-water sorption coefficients, Kww, were linearly correlated to octanol-water partition coefficients and the molecular weight of the studied PAH compounds. The correlation between Kww and molecular weight was the most significant. Column experiments were carried out to study the sorption and desorption of fluorene, anthracene, and pyrene under dynamic conditions. The results indicate linear sorption, but non-linear desorption behavior. The degree of desorption was inversely correlated to a compound's hydrophobicity. Flow interruption experiments showed that sorption and desorption was rate limited. A mass balance of the sorption and desorption tests indicated that sorptive uptake exceeded desorptive release over a given number of pore volumes. Further, absolute mass-removal efficiency increased with the molecular weight and hydrophobicity of the PAH compound. Batch and column studies demonstrated that aspen wood has the potential to become an effective remedial agent for PAH in stormwater runoff or other PAH contaminated waters.

Adsorption↗