Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyelectrolytes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60Linked to original sources
PubMed2004

Micellar electrokinetic chromatography at low pH with polyelectrolyte-coated capillaries.

The performance of capillaries coated with a poly(diallyldimethylammonium) (PDADMA) monolayer or poly(diallyldimethylammonium)-poly(styrenesulfonate) bilayer was investigated and compared under micellar electrokinetic chromatographic (MEKC) conditions. Both monolayer (positively charged) and bilayer (negatively charged) coatings with micellar (sodium dodecyl sulfate) electrolyte generated very stable and pH-independent cathodal electroosmotic flow (EOF). From the results obtained, it can be concluded that in a doubly coated capillary the second poly(styrenesulfonate) layer is replaced by sodium dodecyl sulfate micelles during flushing with micellar electrolyte. Consequently, in order to obtain a stable and pH-independent cathodal electroosmotic flow for the MEKC separations, the capillary coating with the second polyanion layer is not necessary. The importance of the PDADMA coating was illustrated by comparing MEKC separations of the common developing agents (hydroquinone, phenidone, pyrocatechol, pyrogallol and quinone) on a bare uncoated capillary with the coated capillary. The coating provides reproducible MEKC separations at low pH (pH 3.0) with relative standard deviation (R.S.D.) values for migration times and peak areas lower than 0.45 and 3.3%, respectively. Good linearities in the range from 5 x 10(-5) to 2 x 10(-3) mol l(-1) were obtained for all five compounds, with correlation coefficients higher than 0.998. The detection limits were in the range from 5 x 10(-6) mol l(-1) for pyrocatechol to 2 x 10(-5) mol l(-1) for quinone. The proposed MEKC system was applied to the determination of hydroquinone and phenidone in X-ray photographic developer solutions.

Calibration↗
PubMed2004

Polyelectrolyte-stabilized glucose biosensor based on woodceramics as electrode.

OBJECTIVE: Different biosensors for early diagnosis of diabetes have been discussed increasingly. We demonstrate the applicability of a glucose biosensor for rapid and quantitative determination of glucose in experimental sample solutions. DESIGN AND METHODS: Polyethylenimine (PEI)-stabilized glucose oxidase (GOD) was used for the construction of stable glucose biosensor utilizing a simple manufacture procedure. The stabilized glucose oxidase was immobilized by physical adsorption into activated porous and conductive carbonaceous material-woodceramics that served as the immobilization matrix and the electrochemical transducer. The optimum parameters for the construction of the biosensor and the influences of pH and temperature on the biosensor response were explored. RESULTS: Optimum results were obtained using soaking solutions of 2300 U/ml GOD, 10 mg/ml mediator toluidine blue O (TBO), and 2.0%, w/v PEI. The sensitivity of the resulting biosensor for glucose was 1.22 microA/mM, with a linear response in the concentration range of 0.5-7 mM. The sensor-to-sensor reproducibility was good, the relative standard deviation (R.S.D.) being less than 8.0%. The storage and operational stabilities of the glucose biosensor were good. CONCLUSIONS: The glucose biosensor provides reproducible and quantitative information on glucose within minutes and is applicable for the detection of glucose in experimental samples.

Aspergillus niger↗
PubMed2004

The influence of polyelectrolyte charges of polyurethane membrane surface on the growth of human endothelial cells.

A novel technique to introduce free amino groups onto polyester scaffolds via aminolyzing the ester groups with diamine has been developed recently. The introduction of the free amino groups on these polyester surfaces provides us the possibility to modify polymer surface in a simpler manner, e.g. layer-by-layer assembly of charged species. By this technique, many negatively and positively charged biopolymers were deposited alternatively on polyurethane surface. The deposition process was monitored by fluorescence spectroscopy and advancing contact angle measurements. The result of human endothelial cells cultured in vitro showed that cells on negatively charged surface could not spread and flatten well due to the electrostatic repulsion. The lower attachment ratio induced the lower proliferation ratio. However, after the surface charge was inversed by collagen, both attachment and proliferation ratios increased to different extent. Observed under SEM, cells also presented a flat and spreading morphology.

Animals↗
PubMed2006

Polyelectrolyte functionalized magnetic emulsion for specific isolation of nucleic acids.

A magnetic oil in water (o/w) emulsion was cationized by adsorption of poly(ethyleneimine) (PEI). In a subsequent step, the cationic particles were derivatized with partially hydrolyzed poly(maleic anhydride-alt-methyl vinyl ether) copolymer (PMAMVE) to lead negatively charged colloids. The experimental conditions for the covalent grafting of the PMAMVE were selected on the basis of colloidal stability, charge inversion and absence of inhibition of the enzymatic DNA/RNA amplification reactions. Once the experimental conditions were selected, oligonucleotides (ODN) bearing particles were obtained according to the sequential process: (i) grafting of single stranded ODNs onto PMAMVE; (ii) grafting of the PMAMVE-ODN conjugates onto the cationic particles according to the conditions defined above. In this strategy, both steps could be independently controlled. The ODN-PMAMVE-particles conjugates were very stable with time, did not inhibit RT-PCR and were capable of hybridizing specifically with the complementary target.

Emulsions↗
PubMed2004

Water-swellable polyelectrolyte microgels polymerized in an inverse microemulsion using a nonionic surfactant.

A series of poly(dimethylacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) microgels slightly crosslinked by methylene-bis-acrylamide (MBA) were polymerized in a novel inverse microemulsion polymerization (IMEP) system. To determine a suitable composition of the IMEP system, the phase diagram of a pseudoternary system was made. The pseudoternary polymerization system consisted of n-hexane, a nonionic surfactant (polyoxyethylene oleyl ether, C18En), and an aqueous monomer solution. Polymerization was performed in a single-phase reversed micelle solution. The reversed micelles were about 50 nm in diameter, as determined by FF-TEM. The viscometric characteristics of the polymers extracted from the IMEP system were studied in 3 mM sodium chloride aqueous solution. The intrinsic viscosity values for the noncrosslinked and crosslinked (0.1 mol% MBA was incorporated) samples were 25 and 7.4 dl/g, respectively. The overlap concentration (c*) of crosslinked polymer microgel occurred at c[eta] = 1 in the solvent. When the volume fraction (phi) of the microgel was 0.7, the value of the apparent yield stress of the microgel solution was observed. These results show that the microgel has a significant thickening effect above c* due to friction between the microgel particles. It is assumed that the microgels polymerized in a confined space retain the shape or size of the nanosized reactor with a diameter on the order of 50 nm.

Cross-Linking Reagents↗
PubMed2005

Studies of dynamic interactions between a pyrene-labeled polyelectrolyte and an oppositely charged rodlike micelle by a fluorescence quenching technique with use of a hydrophobic quencher.

Electrostatic interactions of poly(sodium 2-(acrylamido)-2-methylpropanesulfonate) (PyPAMPS) labeled with pyrene and a rodlike micelle of dimethyloleylamine oxide (DMOAO), an amine oxide type surfactant, mixed with varying mole fractions (Y) of hexadecyltrimethylammonium chloride (CTAC), a cationic surfactant, were investigated by a fluorescence quenching technique using 3,4'-dimethylbenzophenone (DBP), a hydrophobic quencher, that can only reside in the micellar phase. Fluorescence measurements were performed under homogeneous conditions in the region 0 Yc, the fluorescence was efficiently quenched by DBP-carrying DMOAO/CTAC mixed micelles, both steady-state and time-dependent fluorescence data indicating that the degree of the quenching and hence the extent of the complex formation increased significantly with increasing Y. Applying a kinetic model to the steady-state and time-dependent fluorescence data, the residence time for PyPAMPS in the polymer-micelle complex was calculated. The residence time was found to depend on both Y and mu, e.g., when Y was increased from 0.01 to 0.03, the residence time increased from 4 to 80 mus at mu=0.05 whereas little or no increase in the residence time was observed in this range of Y at mu=0.20. At this higher ionic strength, the residence time increased only moderately from 3 to 10 mus when Y was increased from 0.01 to 0.09.

Journal Article↗
PubMed2005

Electro-optics of colloid-polyelectrolyte complexes: counterion release from adsorbed macromolecules.

Complexation between sodium carboxymethylcellulose (NaCMC) and ellipsoidal particles of oppositely charged beta-FeOOH is studied using electric light scattering and electrophoresis. We focus on the complex behavior for overcharging of the particle surface. In this case, the fraction of condensed counterions on NaCMC is found to remain unchanged during polymer adsorption onto a weakly charged particle surface. Using the theory of Sens and Joanny, we evaluate the fraction of condensed counterions and compare it with results for nonadsorbed NaCMC. The polarization of condensed counterions along the chain of the adsorbed macromolecule is proved to create the electro-optical effect in suspensions stabilized by NaCMC adsorption.

Journal Article↗
PubMed2006

Modeling the complexation properties of mineral-bound organic polyelectrolyte: an attempt at comprehension using the model system alumina/polyacrylic acid/M (M=Eu, Cm, Gd).

This paper contributes to the comprehension of kinetic and equilibrium phenomena governing metal ion sorption on organic-matter-coated mineral particles. Sorption and desorption experiments were carried out with Eu ion and polyacrylic acid (PAA)-coated alumina colloids at pH 5 in 0.1 M NaClO(4) as a function of the metal ion loading. Under these conditions, M interaction with the solid is governed by sorbed PAA (PAA(ads)). The results were compared with spectroscopic data obtained by time-resolved laser-induced fluorescence spectroscopy (TRLFS) with Cm and Gd. The interaction between M and PAA(ads) was characterized by a kinetically controlled process: after rapid metal adsorption within less than 1 min, the speciation of complexed M changed at the particle surface till an equilibrium was reached after about 4 days. At equilibrium, one part of complexed M was shown to be not exchangeable. This process was strongly dependent on the ligand-to-metal ratio. Two models were tested to explain the data. In model 1, the kinetically controlled process was described through successive kinetically controlled reactions that follow the rapid metal ion adsorption. In model 2, the organic layer was considered as a porous medium: the kinetic process was explained by the diffusion of M from the surface into the organic layer. Model 1 allowed a very good description of equilibrium and kinetic experimental data. Model 2 could describe the data at equilibrium but could not explain the kinetic data accurately. In spite of this disagreement, model 2 appeared more realistic considering the results of the TRLFS measurements.

Journal Article↗
PubMed2001

Polyelectrolyte and surfactant mixed solutions. behavior at surfaces and in thin films.

Dilute mixed solutions of non-surface active anionic polymers (polyacrylamide and polystyrene sulfonate, xanthan) and various surfactants have been studied with several methods: surface tension, ellipsometry, X-ray and neutron reflectivity, thin film balance, surface and bulk rheology. A strong synergistic lowering of the surface tension is found with cationic surfactants in the concentration range where no appreciable complexation of surfactant and polymer occurs in the bulk solution (as seen from viscosity measurements). Despite appreciable differences between surface tension behaviour, the adsorbed layer is very similar for all the polymers: their thickness is small and the polymer chains are stretched along the surface. The surface tension behaviour of these polymers with non-ionic surfactants is also different. When the polymers are confined in thin films, the forces between surfaces are similar, and independent of surfactant nature: oscillatory forces are measured, which reflect the existence of a polymer network with a well defined mesh size. The connection of foam stability with surface and bulk complexation is far from clear.

Journal Article↗
PubMed1980

Comparison of polyelectrolyte theories of the binding of cations to DNA.

Predictions of the binding of counterions to DNA made using the counterion condensation theory developed by Manning are compared with those made using the Poisson-Boltzmann equation, solved numerically by the Runge-Kutta procedure. Ions are defined as territorially or atmospherically bound if they fall within a given distance, defined by counterion condensation theory, from the DNA surface. Two types of experimental situations are considered. The first is the delocalized binding of a single type of counterion to DNA. In this case the Poisson-Boltzmann treatment predicts somewhat lower extents of binding TO DNA, modeled as a 10-A radius cylinder, than does Manning theory. The two theories converge as the radius decreases. The second type of experiment is the competition of ions of different valence for binding to DNA. The theories are compared with literature values of binding constants of divalent ions in the presence of monovalent ions, and of spermidine 3+ in the presence of Na+ or Mg2+. Both predict with fair accuracy the salt dependence of the equilibrium constants.

Cations↗
PubMed1994

Parametrization of direct and soft steric-undulatory forces between DNA double helical polyelectrolytes in solutions of several different anions and cations.

Directly measured forces between DNA helices in ordered arrays have been reduced to simple force coefficients and mathematical expressions for the interactions between pairs of molecules. The tabulated force parameters and mathematical expressions can be applied to parallel molecules or, by transformation, to skewed molecules of variable separation and mutual angle. This "toolbox" of intermolecular forces is intended for use in modelling molecular interactions, assembly, and conformation. The coefficients characterizing both the exponential hydration and the electrostatic interactions depend strongly on the univalent counterion species in solution, but are only weakly sensitive to anion type and temperature (from 5 to 50 degrees C). Interaction coefficients for the exponentially varying hydration force seen at spacings less than 10 to 15 A between surfaces are extracted directly from pressure versus interaxial distance curves. Electrostatic interactions are only observed at larger spacings and are always coupled with configurational fluctuation forces that result in observed exponential decay lengths that are twice the expected Debye-Huckel length. The extraction of electrostatic force parameters relies on a theoretical expression describing steric forces of molecules "colliding" through soft exponentially varying direct interactions.

Animals↗
PubMed1998

A Brownian dynamics program for the simulation of linear and circular DNA and other wormlike chain polyelectrolytes.

For the interpretation of solution structural and dynamic data of linear and circular DNA molecules in the kb range, and for the prediction of the effect of local structural changes on the global conformation of such DNAs, we have developed an efficient and easy way to set up a program based on a second-order explicit Brownian dynamics algorithm. The DNA is modeled by a chain of rigid segments interacting through harmonic spring potentials for bending, torsion, and stretching. The electrostatics are handled using precalculated energy tables for the interactions between DNA segments as a function of relative orientation and distance. Hydrodynamic interactions are treated using the Rotne-Prager tensor. While maintaining acceptable precision, the simulation can be accelerated by recalculating this tensor only once in a certain number of steps.

Biophysics↗
PubMed2001

Enzymatically and chemically de-esterified lime pectins: characterisation, polyelectrolyte behaviour and calcium binding properties.

A series of pectins with different levels and patterns of methyl esterification was produced by treatment of a very highly methylated pectin with acid, alkali, plant pectin methyl esterase and fungus pectin methyl esterase. The intrinsic pK values, as well as the free fractions of monovalent and calcium counterions, were determined on pectin salt-free solutions. The variations of pK(a) versus the ionisation degree were found to depend on the de-esterification process but a unique value of 2.90+/-0.15 was estimated for the intrinsic pK value. Calcium binding properties of chemically and enzymatically de-esterified pectins were investigated and experimental results were compared to Manning's theoretical values. A progressive dimerisation process for pectins with a blockwise distribution of carboxyl groups in the presence of calcium ions is hypothesised.

Acids↗
PubMed2001

Capillary electrophoretic separation of uncharged polymers using polyelectrolyte engines. Theoretical model.

We recently demonstrated that the molecular mass distribution of an uncharged polymer sample can be analyzed using free-solution capillary electrophoresis of DNA-polymer conjugates. In these conjugates, the DNA is providing the electromotive force while the uncharged polydisperse polymer chains of the sample retard the DNA engine with different amounts of hydrodynamic drag. Here we present a theoretical model of this new analytical method. We show that for the most favourable, diffusion-limited electrophoresis conditions, there is actually an optimal DNA size to achieve the separation of a given polymer sample. Moreover, we demonstrate that the effective friction coefficient of the polymer chains is related to the stiffness of the two polymers of the conjugate, thus offering a method to estimate the persistence length of the uncharged polymer through mobility measurements. Finally, we compare some of our predictions with available experimental results.

Biopolymers↗
PubMed2003

Interactions of temperature-responsive anionic polyelectrolytes with a cationic surfactant.

The interactions of temperature-responsive copolymers of sodium 2-acrylamido-2-methyl-1-propanesulfonate (AMPS) and N-isopropylacrylamide (NIPAM) with a cationic surfactant, dodecyltrimethylammonium chloride (DTAC), have been studied. The content of AMPS in the copolymers ranged from 1.1 to 9.6 mol%. The surface activity was higher for the polymers with lower AMPS content. It was found that DTAC undergoes association with the polymer chain, forming mixed polymer-surfactant micelles. The values of cac for the polymers were found in fluorescence studies using pyrene as the fluorescent probe. They were in the range 0.9-3.6x10(-3) M and were lower for polymers with higher AMPS content. An increase in DTAC concentration up to about its cmc results in a decrease of the LCST (lower critical solution temperature) of the copolymers, while further increase above the cmc results in an increase of the LCST. The minimum value of LCST in the presence of the surfactant is lower than the LCST of NIPAM homopolymer.

Journal Article↗
PubMed2002

Comment on "experimental analysis of centrifugal dewatering process of polyelectrolyte flocculated waste activated sludge".

In summary, after supernatant liquid was exhausted in the author's experiments, menisci formed, and shrinkage, not pore evacuation and drying, was the mechanism causing removal of water thereafter. Results of centrifugal filtration experiments cannot be applied to solid bowl centrifugation because solid compression conditions are quite different in the two types of machines.

Centrifugation↗