Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “surface modification”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
PubMed2005

Surface modification of liposomes for cardiomyocytes targeting in vitro.

The effect of novel 3-{4-[2-hydroxyl-(1-methyl ethylamine) propyl oxygen]phenyl}propionic acid cetylester (PAC) as a surface modification ligand on the delivery of liposomes into cultured cardiomyocytes was investigated. Small unilamellar liposomes with and without PAC (PAC-liposome and Plain-liposome) were labeled with a fluorescence marker. The cultured neonatal cardiomyocytes were incubated with liposomes under normoxia or hypoxia conditions, and then the cell-associated fluorescence was measured. A high affinity of the PAC-liposomes to cardiomyocytes was observed. The amount of cell uptake of PAC-liposomes under normoxia conditions was 4-fold higher than that of plain-liposome, and the increase was 8.5-fold when hypoxia occured. The results suggested that PAC is a potential surface modification ligand for liposome targeting the ischemic myocardium.

Animals↗
PubMed2004

Lactose surface modification by decantation: are drug-fine lactose ratios the key to better dispersion of salmeterol xinafoate from lactose-interactive mixtures?

PURPOSE: The role of fine lactose in the dispersion of salmeterol xinafoate (SX) from lactose mixtures was studied by modifying the fine lactose concentration on the surface of the lactose carriers using wet decantation. METHODS: Fine lactose was removed from lactose carriers by wet decantation using ethanol saturated with lactose. Particle sizing was achieved by laser diffraction. Fine particle fractions (FPFs) were determined by Twin Stage Impinger using a 2.5% SX mixture, and SX was analyzed by a validated high-performance liquid chromatography method. Adhesion forces between probes of SX and silica and the lactose surfaces were determined by atomic force microscopy. RESULTS: FPFs of SX were related to fine lactose concentration in the mixture for inhalation grade lactose samples. Reductions in FPF (2-tp 4-fold) of Aeroflo 95 and 65 were observed after removing fine lactose by wet decantation; FPFs reverted to original values after addition of micronized lactose to decanted mixtures. FPFs of SX of sieved and decanted fractions of Aeroflo carriers were significantly different (p < 0.001). The relationship between FPF and fine lactose concentration was linear. Decanted lactose demonstrated surface modification through increased SX-lactose adhesion forces; however, any surface modification other than removal of fine lactose only slightly influenced FPF. CONCLUSIONS: Fine lactose played a key and dominating role in controlling FPF. SX to fine lactose ratios influenced dispersion of SX with maximum dispersion occurring as the ratio approached unity.

Administration, Inhalation↗
PubMed2005

Adhesion performance of UHMWPE after different surface modification techniques.

A novel design of an ultra-high molecular weight polyethylene (UHMWPE) glenoid component has been proposed, based on adhesion to PMMA bone cement. However, due to the non-polar nature of UHMWPE, surface modification techniques are needed to obtain good adhesion and thus for the design to be viable. The aim of the study is to investigate adhesion of UHMWPE after different surface treatments. Three gas-phase surface modification techniques were investigated, namely UV/Ozone, corona discharge and radio frequency glow discharge plasma, as well as abrasion. The surface treated samples were examined using water contact angle, surface energy and roughness measurements, as well as single lap-joint shear testing using polymethylmethacrylate (PMMA) bone cement and methylmethacrylate (MMA) adhesive. The effect of aging on bonded samples has also been investigated. Corona and glow discharge treatments were found to activate the surface as shown by an increase in surface energy of over 100% in an order of less than a minute, corresponding to an increase in ultimate shear stress from 0.12 to 0.40 MPa. In contrast, UV/Ozone required exposure times in the order of minutes to have an effect that was still incomparable to the other gas-phase treatments examined. Abrasion produced slightly better adhesion properties for single lap-joints bonded with PMMA compared to the corona treatment. The best treatment was found to be a combined treatment of surface roughening for 10 s, and subsequently a 90 s glow discharge treatment, resulting in failure of the UHMWPE sheet material.

Adhesiveness↗
PubMed2005

[Preparation and surface modification of the magnetic fluid as a targeted drug carrier].

Magnetic fluid containing Fe(3)O(4) as mother nucleus was prepared by chemical coprecipitation and treated with dextran-70 for surface modification. The dextran-70-modified magnetic fluid was reacted with 6-bromohexanoic acid and their chemical stability was studied, with the structure characterized by using laser granulometer, X-ray diffraction, Fourier-transform infrared analysis and transmission electron microscopy. The results showed that the magnetic fluid with surface modification by dextran-70 exhibited high stability in the presence strong alkali or acid. No chemical changes occurred in the magnetic Fe(3)O(4) nucleus surrounded by alkali-treated dextran-70 and the organic chain linked to the surface dextran rendered the reaction to the anti-cancer drug such as mitomycin C possible, suggesting the potential of the preparation as a drug carrier.

Antiparasitic Agents↗
PubMed2003

[Surface modifications to improve biocompatibility and mechanical properties of orthopedic implants].

State of the art surface modifications on metallic materials for orthopedic and dental implants permit clinical application if implant design,manufacturing process as well as function and duration of implantation are harmonized with each other. Keeping these prerequisites in mind,hydroxylapatite is suited for closer connection of fixation elements in hard tissue. PVD or PECVD modifications can make gliding surfaces or surfaces of fixation elements abrasion resistant if the pressure-area ratio does not exceed threshold values in cases of surfaces moving relative to each other

Biomechanical Phenomena↗
PubMed2002

The effect of surface modification and aprotinin on cellular injury during simulated cardiopulmonary bypass.

Cardiopulmonary bypass (CPB) elicits derangements to the formed elements of blood because of the physical stresses of extracorporeal flow. Methods of reducing the impact of CPB include circuit surface modification and pharmacological supplementation. The purpose of this study was to examine the effects of aprotinin in combination with surface modification during simulated CPB. Fresh whole bovine blood was used to prime standard CPB circuits divided into four groups (N = 3): control (CTR), aprotinin 300 KIU/mL (APR), Poly (2-methoxyethylacrylate) coating (PMEA), and APR with PMEA (APR-PMEA). Physical stresses included venous reservoir negative pressure (-85 mmHg), arterial line pressure of 150 mmHg at 5 LPM, and air-blood interface, applied over a 90-minute period. Samples were drawn at the following times: 0, 10, 45, and 90 minutes. Endpoints included platelet count (PLT), plasma-free hemoglobin (PFHb), and thromboelastography (TEG). PLT did not change (138.9 +/- 15.0 vs. 102.9 +/- 21.0, p = ns) throughout the 90-minute experimental periods in any group. PFHb increased significantly (mean of 19- fold) throughout the experiment, but was not affected by any treatment. The TEG index declined in the CTR (3.6 +/- 0.4 vs. -16.2 +/- 2.9, p < .0003), PMEA (5.9 +/- 0.8 vs. -2.7 +/- 3.8, p < .02), and APR-PMEA (4.6 +/- 1.0 vs. -2.8 +/- 0.3 p < .0003) groups, but not in the APR group (3.6 +/- 2.2 vs. -1.3 +/- 3.3 p = .10). In conclusion, neither APR nor PMEA had an effect on either red cell hemolysis or PLT, but APR treatment alone significantly attenuated the derangements in coagulation induced in this extracorporeal model.

Animals↗
PubMed2002

Surface modification of quartz inhibits toxicity, particle uptake, and oxidative DNA damage in human lung epithelial cells.

Quartz (crystalline silica) is not consistently carcinogenic across different industries where similar quartz exposure occurs. In addition, there are reports that surface modification of quartz affects its cytotoxicity, inflammogenicity, and fibrogenicity. Taken together, these data suggest that the carcinogenicity of quartz is also related to particle surface characteristics, and so we determined the genotoxic effects of DQ12 quartz particles versus DQ12 whose surface was modified by treating with either aluminum lactate or polyvinylpyridine-N-oxide (PVNO). The different particle preparations were characterized for hydroxyl-radical generation using electron spin resonance (ESR). DNA damage was determined by immunocytochemical analysis of 8-hydroxydeoxyguanosine (8-OHdG) and the alkaline comet-assay using A549 human lung epithelial cells. Cytotoxicity was measured using the LDH- and MTT-assays, and particle uptake by the A549 cells was quantified by light microscopy, using digital light imaging evaluation of 800 nm sections. The ability of quartz to generate hydroxyl-radicals in the presence of hydrogen peroxide was markedly reduced upon surface modification with aluminum lactate or PVNO. DNA strand breakage and 8-OHdG formation, as produced by quartz at nontoxic concentrations, could be completely prevented by both coating materials. Particle uptake into A549 cells appeared to be significantly inhibited by the PVNO-coating, and to a lesser extent by the aluminum-lactate coating. Our data demonstrate that respirable quartz particles induce oxidative DNA damage in human lung epithelial cells and indicates that surface properties of the quartz as well as particle uptake by these target cells are important in the cytotoxic and the genotoxic effects of quartz in vitro.

Cell Survival↗
PubMed2004

Surface modification of titanium implant by microarc oxidation and hydrothermal treatment.

Surface modification of titanium implant is processed by microarc oxidation and hydrothermal treatment. A porous surface with a biologically active bone-like apatite layer was formed. The apatite layer consists of very fine crystals and high crystallinity and is integrated with the titanium alloy substrate with a graded structure without a distinct interface. Such a bioactive layer is expected not only to enhance the bony ingrowth into the porous structure, but also to improve the interlocking between implant and bone.

Alloys↗
PubMed2005

Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents.

The fabrication of polymer microchips allows inexpensive, durable, high-throughput and disposable devices to be made. Poly(methylmethacrylate) (PMMA) microchips have been fabricated by hot embossing microstructures into the substrate followed by bonding a cover plate. Different surface modifications have been examined to enhance substrate and cover plate adhesion, including: air plasma treatment, and both acid catalyzed hydrolysis and aminolysis of the acrylate to yield carboxyl and amine-terminated PMMA surfaces. Unmodified PMMA surfaces were also studied. The substrate and cover plate adhesion strengths were found to increase with the hydrophilicity of the PMMA surface and reached a peak at 600 kN m(-2) for plasma treated PMMA. A solvent assisted system has also been designed to soften less than 50 nm of the surface of PMMA during bonding, while still maintaining microchannel integrity. The extent to which both surface modifications and solvent treatment affected the adhesion of the substrate to the cover plate was examined using nanoindentation methods. The solvent bonding system greatly increased the adhesion strengths for both unmodified and modified PMMA, with a maximum adhesion force of 5500 kN m(-2) achieved for unmodified PMMA substrates. The bond strength decreased with increasing surface hydrophilicity after solvent bonding, a trend that was opposite to what was observed for non-solvent thermal bonding.

Equipment Design↗
PubMed2004

[Spectral diagnosis of dielectric barrier plasma discharge at atmospheric pressure and its application to surface modification of materials].

The spectral lines of air and argon plasma emission at atmospheric pressure were recorded and analyzed. Plasma parameters such as discharge current, discharge gap and electron temperature were measured. The purpose of the study is to control the process of materials' surface modification promptly. The experimental results indicate that a critical discharge gap is an important parameter to improve the quality of materials' surface modification, and spectral diagnosis has been proved to be a workable method by choosing a suitable discharge gap.

English Abstract↗
PubMed2003

Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system.

A medical grade segmented polyetherurethane (PEU) was treated with a low-powered gas plasma using O(2), Ar, N(2) and NH(3) as the treatment gases. Changes in the surface functional group chemistry were studied using X-ray photoelectron spectroscopy. The wettability of the surfaces was examined using dynamic contact angle measurements and the surface morphology was evaluated using atomic force microscopy. The influence of the surface modification to the polyurethane on the blood response to the polyetherurethane was investigated by measuring changes in the activation of the contact phase activation of the intrinsic coagulation cascade. The data demonstrate that the plasma treatment process caused surface modifications to the PEU that in all cases increased the polar nature of the surfaces. O(2) and Ar plasmas resulted in the incorporation of oxygen-containing groups that remained present following storage in an aqueous environment. N(2) and NH(3) plasmas resulted in the incorporation of nitrogen-containing groups but these were replaced with oxygen-containing groups following storage in the aqueous environment. In all plasma treatments there was a lowering of contact phase activation compared to the untreated surface, the N(2) and NH(3) treatments dramatically so.

Biocompatible Materials↗
PubMed2006

Surface modification of hydroxyapatite nanocrystals by grafting polymers containing phosphonic acid groups.

A novel approach for the surface modification of hydroxyapatite (HAp) nanocrystals is described by grafting polymerization of vinyl phosphonic acid (VPA) using a redox initiating system in an aqueous media. Fourier transform infrared (FT-IR) and XRD analyses confirmed the modification reaction on HAp surfaces. Inductively coupled plasma mass spectroscopy (ICP MS) showed that the Ca/P molar ratio decreased from 1.67 to 1.36 with increasing the feed VPA amount. Zeta potentials of unmodified HAp and modified HAp in phosphate-buffered saline (PBS) solutions (pH 7.4, ionic strength = 10 mM) were negative and decreased with increasing the amount of grafted PVPA. Transmission electron microscopy (TEM) measurements and time-dependent phase monitoring indicated that the colloidal stability of modified HAp over unmodified HAp in water dramatically increased and tended to exist as single nanocrystals without aggregation.

Adsorption↗
PubMed2003

The influence of surface modification on the cytotoxicity of PAMAM dendrimers.

The influence of surface modification on the cytotoxicity of PAMAM dendrimers was examined using Caco-2 cells. Dendrimers were modified by conjugating either lauroyl chains or polyethylene glycol (PEG) 2000 onto the surface of cationic PAMAM dendrimers (G2, G3, G4). The cytotoxicity of unmodified dendrimers towards Caco-2 cells was appreciably higher for cationic (whole generation) compared with anionic (half generation) dendrimers and for both types increased with increasing size (generation) and concentration. A marked decrease in the cytotoxicity of cationic PAMAM dendrimers was noted when the surface was modified, with the addition of six lauroyl or four PEG chains being particularly effective in decreasing cytotoxicity. This decrease in cytotoxicity is thought to be due to a reduction/shielding of the positive charge on the dendrimer surface by the attached chains. The cytotoxicity of dendrimer-based delivery systems is likely to be very different from the parent dendrimer.

Caco-2 Cells↗
PubMed2006

Peptide-surface modification of poly(caprolactone) with laminin-derived sequences for adipose-derived stem cell applications.

Human adipose tissue has been recognized as a source of adult stem cells for tissue engineering applications such as bone, cartilage, and soft tissue repair. For the success of these tissue-engineering approaches, a cell delivery vehicle such as a hydrogel or scaffold is required to position the stem cells at the site of need. Surface modification techniques have been instrumental in the development of scaffolds that promote cell-surface interactions. In this study, poly(caprolactone) (PCL), surfaces were modified in order to promote the attachment and proliferation of adipose-derived stem cells (ASCs). RGD, YIGSR, and IKVAV peptide sequences derived from the extracellular matrix protein laminin were each covalently attached to an aminated polymer surface using carbodiimide chemistry. The surface was characterized using scanning electron microscopy (SEM), goniometry and X-ray photoelectron spectroscopy (XPS). The attachment and proliferation of ASCs was assessed on the different peptide-treated surfaces. XPS analysis confirmed the presence of the peptide sequences on the surface of the polymer as indicated by the increase in the nitrogen/carbon ratio on the surface of the polymer. Among all peptide sequences tested, IKVAV-treated surfaces had a significantly greater number of ASCs bound 2 and 3 days after cell seeding. SEM confirmed differences in the morphology of the cells attached to the three peptide-treated surfaces. These results indicate that IKVAV is a suitable peptide sequence for use in surface modification techniques aimed at improving the attachment of ASCs to a tissue-engineered scaffold.

Adipocytes↗
PubMed2001

Ameliorated chrysotile-induced DNA damage in human embryo lung cells by surface modification of chrysotile with rare earth compounds.

OBJECTIVE: In view of the fact that asbestos is not only a key occupational hazard, but also an important environmental pollutant, it is necessary to develop a proper method to decrease the carcinogenicity of asbestos fibers. This study was designed to determine if the surface modification of chrysotile asbestos fiber (CAF) with rare earth compounds (REC) can ameliorate CAF-induced DNA damages in human embryo lung (HEL) cells. METHODS: After incubation with REC solution at different concentrations at room temperature for 1 h, natural and REC-pretreated CAF was added to cell culture at various doses. At the selected time as the experiment designed, DNA damages of the HEL cells were detected by Unscheduled DNA Synthesis (UDS) and Single Cell Gel Electrophoresis (SCGE) assays. RESULTS: The UDS induced by natural CAF was elevated with the increase of CAF doses. There was a good dose-response relationship between the UDS and the amount of CAF in the medium and the coefficient of correlation (R) was 0.958 at P < 0.05. In REC-pretreated CAF groups, the UDS declined with the increase of REC doses. Both catalase (CAT) and dimethylsulfoxide (DMSO) also reduced the CAF-induced enhancement of UDS. In SCGE assay, CAF induced DNA chain breakage and the magnitude of DNA chain breakage increased in a dose-dependent manner and the coefficient of correlation (R) was 0.992 at p < 0.01, while REC-pretreated CAF significantly decreased the induction of DNA chain breakage in a dose-dependent manner (r = 0.989, p < 0.05). CONCLUSION: It can be concluded that CAF-induced DNA damages in HEL cells may be partly mediated by oxygen derivatives, and the surface modification of CAF with REC might hide critical sites on the fiber surface, thereby reducing the fiber-mediated production of oxygen derivation and lowering the CAF-induced UDS and DNA chain breakage in HEL cells.

Asbestos, Serpentine↗
PubMed1998

Effect of surface modifications of intraocular lenses on the adherence of Staphylococcus epidermidis.

The development of polymers with different surface properties and surface modifications of intraocular lenses (IOL) should reduce foreign body reactions after implantation by reducing the surface hydrophobicity of the lenses. It was examined how far such surface variations influenced the adhesiveness of bacteria. The most common organism isolated from cases of postoperative endophthalmitis is Staphylococcus epidermidis. For this reason, three strains of this species, the type strain ATCC 14990 and two clinical isolates (8687, 6579 I), with different hydrophobic surfaces, were studied. IOL made of PMMA, silicone, and a copolymer as well as PMMA lenses with modified surfaces (unpolished, polished, silanized, and heparinized) were used. Bacteria were radiolabelled with 3H-thymidine and the adherent bacteria were calculated per mm2 of lens surface. The three strains adhered better to the unpolished surface of silicone than to PMMA. Treatment of PMMA surface by polishing diminished the differences between the strains. An influence of hydrophobic interactions on the adherence of S. epidermidis ATCC 14990 was demonstrated. The adherence of this hydrophobic type strain was clearly reduced by heparinization of the PMMA surface. In contrast, the hydrophilic catheter isolate 6579 I adhered better to modified surfaces. This strain differed clearly in its PFGE pattern from both hydrophobic strains. Hydrophobic interactions play a role in the bacterial adherence to intraocular lenses in vitro and in vivo. Modifications of polymer surfaces, however, can result in rather different effects depending on the bacterial surface composition and properties.

Bacterial Adhesion↗
PubMed2002

Influence of different surface modification treatments on poly(D,L-lactic acid) with silk fibroin and their effects on the culture of osteoblast in vitro.

The objective of this study was to investigate the efficiency of two treatments for poly(D,L-lactic acid) (PDLLA) surface modification using silk fibroin. one chemical treatment and one physical treatment: 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide (WSC) and entrapment. The properties of control films, WSC-modified and entrapment-treated PDLLA films were investigated by water contact angle measurement and electron spectroscopy for chemical analysis (ESCA). The water-contact angle measurement indicated the change of hydrophilicity and the ESCA analysis suggested that the modified PDLLA film using silk fibroin became enriched with nitrogen atoms. The biocompatibility of PDLLA film might be altered, which in turn would affect the functions of cells that were seeded on it. Therefore, attachment and proliferation of osteoblasts that were seeded on modified PDLLA films and control films were examined. Cell viability was evaluated by the MTT assay and differentiated cell function was assessed by measuring alkaline phosphatase activity. These results suggested that silk fibroin was used to modify PDLLA surface via WSC and that entrapment could improve the interactions between osteoblasts and PDLLA films. The entrapment treatment was more effective thin WSC treatment to accomplish the goal of surface modification.

Alkaline Phosphatase↗