Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Microscopy, Scanning Probe”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources
PubMed1993

Solution structure and direct imaging of fibronectin adsorption to solid surfaces by scanning force microscopy and cryo-electron microscopy.

In this study, we present the scanning force and electron microscopic visualization of single molecules of fibronectin either frozen hydrated or adsorbed onto metallic and polymeric surfaces with different solid surface tensions. The surfaces were characterized by dynamic contact angle measurements, X-ray photo emission spectroscopy (XPS or ESCA) and scanning force microscopy. The proteins were prepared by fast protein liquid chromatography (FPLC) and characterized by gel electrophoresis. Protein films on surfaces were investigated by surface plasmon resonance spectroscopy and directly imaged by scanning force microscopy. The spreading of the adsorbed fibronectin revealed dependence on the chemical composition and the solid surface tension. Structure of fibronectin in solution as well as on solid interface appeared as an extended straight strand as obtained by imaging with electron and scanning probe microscopies. Imaging of DNA was performed by scanning force microscopy to test the accuracy and reproducibility of our measurements. The measured contour lengths were accurate and the larger widths were caused by convolution of the tip shape and sample. Frictional forces during the scan have been of significant contribution in the imaging mechanism. Moreover, this work demonstrated that scanning force microscopy can be used for mapping the orientation and organization of protein film adsorbed onto various surfaces at the nanoscale.

Adsorption↗
PubMed2003

Immobilization of fine particles on lactose carrier by precision coating and its effect on the performance of dry powder formulations.

The feasibility of immobilization of fine particles on a lactose carrier by precision coating and producing carrier particles of different surface roughness from the same core was explored. A relationship between the resultant surface roughness of the carrier and the in vitro deposition pattern of salbutamol sulfate was established. Lactose carrier particles in the precision coating chamber were spray coated with liquid suspensions consisting of micronized lactose dispersed in isopropyl alcohol (IPA) and/or water mixtures. The surface-modified lactose particles were fractionated and then characterized by laser diffraction for size, image analysis for shape, and scanning probe microscopy for surface roughness. The in vitro deposition pattern of salbutamol sulfate from the drug-lactose mixtures was determined with the twin-stage glass impinger and expressed as the fine particle fraction and dispersibility of the drug. Immobilization of fine particles on carrier particles was feasible by the precision coating process as shown by the scanning probe topographs and the roughness values of the carrier particles. Generally, more discrete fine particles were deposited on the carrier surface and a higher surface roughness was seen when the spray suspension consisting of a higher proportion of IPA was used. A significant correlation was found between the fine particle fraction of salbutamol sulfate with the roughness of lactose. This relationship established between the in vitro drug deposition pattern and the microscopic surface roughness of the carrier would be helpful in the optimization of drug delivery to targeted areas in the lungs.

Albuterol↗
PubMed1997

Scanning ion conductance microscopy of living cells.

Currently there is a great interest in using scanning probe microscopy to study living cells. However, in most cases the contact the probe makes with the soft surface of the cell deforms or damages it. Here we report a scanning ion conductance microscope specially developed for imaging living cells. A key feature of the instrument is its scanning algorithm, which maintains the working distance between the probe and the sample such that they do not make direct physical contact with each other. Numerical simulation of the probe/sample interaction, which closely matches the experimental observations, provides the optimum working distance. The microscope scans highly convoluted surface structures without damaging them and reveals the true topography of cell surfaces. The images resemble those produced by scanning electron microscopy, with the significant difference that the cells remain viable and active. The instrument can monitor small-scale dynamics of cell surfaces as well as whole-cell movement.

Animals↗
PubMed2000

Atomic force microscopy captures quantized plastic deformation in gold nanowires.

Scanning probe microscopy has become a powerful tool to detect structural changes in small clusters of atoms. Herein, we use an atomic force microscope to measure the length of gold nanowire structures during extension and compression cycles. We have found that nanowires elongate under force in quantized steps of up to three integer multiples of 1.76 A and that they shorten spontaneously in steps of 1.52 A. Our results can be explained by the sliding of crystal planes within the gold nanowires creating stacking faults that change the local structure from face-centered cubic to hexagonal close packed. Our data also show that there can be up to three simultaneous slip events, in good agreement with the tetrahedral arrangement of slip planes in a gold crystal. These experiments provide direct evidence for the mechanism underlying the plastic deformation of a nanowire. A similar approach can be used to examine the atomic events underlying the plastic failure of other metals and their alloys.

Journal Article↗
PubMed1999

Surface topography, corrosion and microhardness of nitrogen-diffusion-hardened titanium alloy.

Mechanical-electrochemical interactions accelerate corrosion in mixed-metal modular hip prostheses. These interactions can be reduced by improving the modular component machining tolerances or by improving the resistance of the components to scratch or fretting damage. Wrought cobalt-alloy (CoCrMo) is known to have better tribological properties compared to the titanium alloy (Ti64). Thus, improving the tribological properties of this mixed-metal interface should center around improving the tribological properties of the Ti64 alloy. This study used scanning probe microscopy (contact, tapping and phase contrast mode), scanning electron microscopy, corrosion testing, and microhardness testing to determine the effect of a nitrogen-diffusion hardening process on the surface morphology, electrochemistry and surface hardness of the Ti64 alloy. The nitrogen-diffusion-hardened titanium alloy samples (N-Ti64) had a more pronounced grain structure, more nodular surface, and significantly (P<0.01) higher mean roughness values than the control-Ti64 samples. The N-Ti64 samples also exhibited at least equivalent corrosion behavior and a definite increase in surface hardness compared to the control Ti64 samples. The equivalent corrosion behavior and improved surface hardness indicate the potential for N-Ti64 samples to resist similar and mixed-metal scratch and fretting damage. The use of N-Ti64 as opposed to control-Ti64 may therefore reduce the occurrence of mechanical-electrochemical degradation in mixed-metal modular total hip prostheses.

Alloys↗
PubMed2003

The application of atomic force microscopy to the study of living vertebrate cells in culture.

Atomic force microscopy (AFM), a relatively new variant of scanning probe microscopy developed for the material sciences, is becoming an increasingly important tool in other disciplines. In this review I describe in nontechnical terms some of the basic aspects of using AFM to study living vertebrate cells. Although AFM has some unusual attributes such as an ability to be used with living cells, AFM also has attributes that make its use in cell biology a real challenge. This review was written to encourage researchers in the biological and biomedical sciences to consider AFM as a potential (and potent) tool for their cell biological research.

Animals↗
PubMed2001

Noncontact electrochemical imaging with combined scanning electrochemical atomic force microscopy.

Combined scanning electrochemical atomic force microscopy (SECM-AFM) is a recently introduced scanned probe microscopy technique where the probe, which consists of a tip electrode and integrated cantilever, is capable of functioning as both a force sensor, for topographical imaging, and an ultramicroelectrode for electrochemical imaging. To extend the capabilities of the technique, two strategies for noncontact amperometric imaging-in conjunction with contact mode topographical imaging-have been developed for the investigation of solid-liquid interfaces. First, SECM-AFM can be used to image an area of the surface of interest, in contact mode, to deduce the topography. The feedback loop of the AFM is then disengaged and the stepper motor employed to retract the tip a specified distance from the sample, to record a current image over the same area, but with the tip held in a fixed x-y plane above the surface. Second, Lift Mode can be employed, where a line scan of topographical AFM data is first acquired in contact mode, and the line is then rescanned to record SECM current data, with the tip maintained at a constant distance from the target interface, effectively following the contours of the surface. Both approaches are exemplified with SECM feedback and substrate generation-tip collection measurements, with a 10-microm-diameter Pt disk UME serving as a model substrate. The approaches described allow electrochemical images, acquired with the tip above the surface, to be closely correlated with the underlying topography, recorded with the tip in intimate contact with the surface.

Journal Article↗
PubMed2001

Examination of line crossings by atomic force microscopy.

Until now, the most widely used methods for the forensic examination of line crossings in documents were optical and electron microscopy. The combination of both techniques allows one in most cases to establish the sequence of lines. The recent development of scanning probe microscopy [1] gives an opportunity to complement or even replace the classical instruments used in this field. Scanning probe microscopes have been designed to study surfaces at high magnification. The aim of this study was to verify if their most popular member, the atomic force microscope (AFM) [2], can be applied to line crossing problems. The results show for the first time that AFM images present the same qualitative information obtained by scanning electron microscope (SEM) images and, consequently, allow the determination of the line crossing sequence under ambient conditions without vacuum and conductive coating of specimens.

Forensic Medicine↗
PubMedDate not supplied

Atomic force microscopy of nanometric liposome adsorption and nanoscopic membrane domain formation.

Scanning probe microscopy studies of membrane fusion and nanoscopic structures were performed using hydrated single lipids and lipid mixtures. Extruded vesicles of DMPC and mixtures at various concentrations of DLPC, DPPC and cholesterol were deposited on freshly cleaved mica and studied in a fluid environment by AFM. The nanostructures formed by these extruded liposomes ranged from isolated unilamellar vesicles to flat sheet membranes and were marked influenced by thermodynamic phase behavior. For DMPC membrane, intact bilayers exhibited a phase transition process in agreement with large bilayer patches. In the DLPC, DPPC and cholesterol mixtures, nanoscopic domain diameters ranged from approximately 25 to 48nm with height differences of approximately 1.4nm; all values were lipid composition-dependent. Our data support and extend previous studies of microscopic domains and phase boundaries of the same mixtures in giant unilamellar vesicles determined by confocal light microscopy. Our approach for preparing and utilizing supported membrane structures is potentially relevant to studies of native cell membranes.

Adsorption↗
PubMed2003

DNA height in scanning force microscopy.

The measured height of DNA molecules adsorbed on a mica substrate by scanning probe microscopy is always less than the theoretical diameter. In this paper we show that, when imaged in ambient conditions, the molecules are usually immersed in the salt layer used to adsorb them to the substrate. This layer distorts the measurement of DNA height and is the main source of error but not the only one. We have performed different experiments to study this problem using two scanning force techniques: non-contact tapping mode in air and jumping mode in aqueous solution, where the dehydration phenomena is minimized. Height measurements of DNA in air using tapping mode reveal a height of 0.7+/-0.2nm. This value increases up to 1.5+/-0.2nm when the salt layer, in which the molecules are embedded, is removed. Jumping experiments in water give a value of 1.4+/-0.3nm when the maximum applied force is 300pN and 1.8+/-0.2nm at very low forces, which confirms the removal of the salt layer. Still, in all our experiments, the measured height of the DNA is less than the theoretical value. Our results show that although the salt layer present is important, some sample deformation due to either the loading force of the tip or the interaction with the substrate is also present.

Adsorption↗
PubMed1995

Human dentine as a hydrogel.

The pores (tubules) of human dentine in 0.02-cm planoparallel sections of newly extracted permanent teeth were investigated. By the conventional scanning electron microscopy these pores appear empty, but by the newly developed scanning-probe microscopy the presence of a complex matrix could be established. By measuring the transport of neutral myoglobin by diffusion alone and diffusion+bulk flow, the area of dentine occupied by the matrix was calculated to be 1.9 +/- 0.9% and 2.3 +/- 0.5%, respectively. The hydraulic conductivity was surprisingly small, 1.35 +/- 0.55 x 10(-7) ml/(s.cm2 dentine) at a pressure difference of 0.1 kPa across a 1-cm thick section. This suggests a hydrogel with a relatively dense network, the width of meshes estimated at 2 x 30 nm. In line with this concept, enzymatic degradation of the organic matter increased the hydraulic conductivity 3000 times. By studying the transport of negatively charged myoglobin, the matrix was calculated to carry 18 mEq/l of positive charges. Due to the consequent attraction of small, negative ions and thence of water, the pressure within the matrix would be about 1.33 kPa, a force which will act to immobilize the water in the channels. The concept of a hydrogel in the dentine tubules was also supported by the finding that shielding the charges with bathing media of high ionic strength reduced the hydraulic conductivity.

Adolescent↗
PubMed1975

Scanning electron microscopy and electron probe microanalysis of calcified alpha-elastin coacervates.

The uptake of calcium and phosphorus from a serum calcification medium by coacervated alpha-elastin was studied by electron probe microanalysis and scanning electron microscopy. Calcium and phosphorus were bound by the coacervate in ratios similar to that of hydroxyapatite. A significant difference was observed in the secondary electron image of the coacercules from the serum during calcification of the coacervate.

Animals↗
PubMed2000

Formation of three-dimensional protein-lipid aggregates in monolayer films induced by surfactant protein B.

This study focuses on the structural organization of surfactant protein B (SP-B) containing lipid monolayers. The artificial system is composed of the saturated phospholipids dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) in a molar ratio of 4:1 with 0.2 mol% SP-B. The different "squeeze-out" structures of SP-B were visualized by scanning probe microscopy and compared with structures formed by SP-C. Particularly, the morphology and material properties of mixed monolayers containing 0.2 mol% SP-B in a wide pressure range of 10 to 54 mN/m were investigated revealing that filamentous domain boundaries occur at intermediate surface pressure (15-30 mN/m), while disc-like protrusions prevail at elevated pressure (50-54 mN/m). In contrast, SP-C containing lipid monolayers exhibit large flat protrusions composed of stacked bilayers in the plateau region (app. 52 mN/m) of the pressure-area isotherm. By using different scanning probe techniques (lateral force microscopy, force modulation, phase imaging) it was shown that SP-B is dissolved in the liquid expanded rather than in the liquid condensed phase of the monolayer. Although artificial, the investigation of this system contributes to further understanding of the function of lung surfactant in the alveolus.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed1994

Covalent anchoring of proteins onto gold-directed NHS-terminated self-assembled monolayers in aqueous buffers: SFM images of clathrin cages and triskelia.

N-Hydroxysuccinimide-terminated self-assembled monolayers with linear (CH2)10 chains were prepared on ultraflat Au(111) surfaces from dithiobis(succinimidylundecanoate). These monolayers, which are covalently chemisorbed to gold via thiolate bonds, form a highly reactive amino-group specific carpet at the liquid-solid interface. Proteins bind to it covalently in aqueous buffers under mild conditions; this provides a (general) procedure for protein immobilization for scanning probe microscopy. Using this technique, we have obtained what we believe are the first scanning force microscopy images of clathrin cages and of their in situ disassembly, yielding typical triskelia under non-denaturing conditions.

Animals↗
PubMed1993

Analysis of biomedical polymer surfaces: polyurethanes and plasma-deposited thin films.

The surface characterization of biomaterials is important for understanding the biological reactivity of surfaces and for monitoring surface reproducibility and contamination. Electron spectroscopy for chemical analysis (ESCA), secondary ion mass spectrometry (SIMS), contact-angle methods, vibrational spectroscopic methods, and scanning probe microscopies are briefly reviewed. Examples are presented using these methods to characterize RF plasma-deposited surfaces based upon acetone and oxygen for cell culture and Biomer¿ surfaces.

Biocompatible Materials↗
PubMed2003

The birth and evolution of surface science: child of the union of science and technology.

This article is an account of the birth and evolution of surface science as an interdisciplinary research area. Surface science emanated from the confluence of concepts and tools in physics and chemistry with technological innovations that made it possible to determine the structure and properties of surfaces and interfaces and the dynamics of chemical reactions at surfaces. The combination in the 1960s and 1970s of ultra-high-vacuum (i.e., P < 10(-7) Pascal or 10(-9) Torr) technology with the recognition that electrons in the energy range from 50 to 500 eV exhibited inelastic collision mean free paths of the order of a few angstroms fostered an explosion of activity. The results were a reformulation of the theory of electron solid scattering, the nearly universal use of electron spectroscopies for surface characterization, the rise of surface science as an independent interdisciplinary research area, and the emergence of the American Vacuum Society (AVS) as a major international scientific society. The rise of microelectronics in the 1970s and 1980s resulted in huge increases in computational power. These increases enabled more complex experiments and the utilization of density functional theory for the quantitative prediction of surface structure and dynamics. Development of scanning-probe microscopies in the 1990s led to atomic-resolution images of macroscopic surfaces and interfaces as well as videos of atoms moving about on surfaces during growth and diffusion. Scanning probes have since brought solid-liquid interfaces into the realm of atomic-level surface science, expanding its scope to more complex systems, including fragile biological materials and processes.

Journal Article↗
PubMed2002

Chiral recognition in dimerization of adsorbed cysteine observed by scanning tunnelling microscopy.

Stereochemistry plays a central role in controlling molecular recognition and interaction: the chemical and biological properties of molecules depend not only on the nature of their constituent atoms but also on how these atoms are positioned in space. Chiral specificity is consequently fundamental in chemical biology and pharmacology and has accordingly been widely studied. Advances in scanning probe microscopies now make it possible to probe chiral phenomena at surfaces at the molecular level. These methods have been used to determine the chirality of adsorbed molecules, and to provide direct evidence for chiral discrimination in molecular interactions and the spontaneous resolution of adsorbates into extended enantiomerically pure overlayers. Here we report scanning tunnelling microscopy studies of cysteine adsorbed to a (110) gold surface, which show that molecular pairs formed from a racemic mixture of this naturally occurring amino acid are exclusively homochiral, and that their binding to the gold surface is associated with local surface restructuring. Density-functional theory calculations indicate that the chiral specificity of the dimer formation process is driven by the optimization of three bonds on each cysteine molecule. These findings thus provide a clear molecular-level illustration of the well known three-point contact model for chiral recognition in a simple bimolecular system.

Cysteine↗
PubMed1996

Atomic force microscopy of DNA, nucleoproteins and cellular complexes: the use of functionalized substrates.

Progress towards rapid and simple characterization of biomolecular samples by scanning probe microscopy is impeded mainly by limitations of the current approach to sample preparation. We are working on approaches based on chemical functionalization of mica. Treatment of mica with aminopropyltriethoxy silane (APTES) makes the surface positively charged (AP-mica) and able to hold DNA in place for imaging, even in water. We have shown that AP-mica is an appropriate substrate for numerous nucleoprotein complexes as well. The AFM images of the complex of DNA with RecA protein are stable and indicate a structural periodicity for this filament. AP-mica holds strongly such large DNA complexes as kinetoplast DNA (kDNA) and is an appropriate substrate for their imaging with AFM. We have further develop this approach for making hydrophobic substrates. Silylation of mica surface with hexamethyldisilazane (Me-mica) allowed us to get AFM images of chlorosomes, an antenna complex isolated from green photosynthetic bacteria. Me-mica may be converted into a positively charged substrate after treatment with water solutions of tetraethylammonium bromide or cetyltrimethylammonium bromide. These activated surfaces show high activity towards binding the DNA molecules.

Aluminum Silicates↗