SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Quantitative structure-activity relationship (QSAR) studies were done with a family of cyclic imides. Promising efforts to create a QSAR model with substantial predictive power for the design of novel cyclic imides with improved analgesic activity are reported.
A series of 17 long-chain arylpiperazines containing bulky, complex imide systems (5,8-dimethyl-3b,9-epoxy-(3a,4,5,6,7,8,9,9a)-octahydro-1H-benzo[e]isoindole-1,3(2H)-dione or 4,9-diphenyl-4,9-epoxy-3a,4,9,9a-tetra-hydro-1H-benzo[f]isoindole-1,3(2H)-dione) was synthesized and evaluated for their affinity for serotonin 5-HT1A, 5-HT2A and dopamine D2 receptors. Most of the new compounds showed moderate activity at 5-HT1A binding sites (Ki = 100-492 nM), and two derivatives were found to have marked affinity for the 5-HT2A receptor subtype. None of the tested compounds displayed appreciable binding to dopamine D2 receptors Structure-activity relationships were discussed in respect to an arylpiperazine fragment, whereas the comparison of different imide terminals enabled determination of the size of a hydrophobic pocket (approximately 300 A3) within the 5-HT1A receptor.
The preparation of N-substituted cyclic imides N-[4-[(4-aryl)-1-piperazinyl]alkyl]-5,7-dioxabicyclo[2.2.2]octane- 2, 3-dicarboximides by condensation of N-(3-chloropropyl)- or N-(4-chlorobutyl)imides with appropriate amine has been described. One of compounds was tested in the Vogel's test and displayed an expected activity on CNS.
The electrochemical reduction of the imide complex [Mo2(cp)2(mu-SMe)3(mu-NH)]+ (1+) has been investigated in THF and MeCN electrolytes by cyclic voltammetry, controlled-potential electrolysis and coulometry. In the absence of free protons, the electrochemical reduction produces the amide derivative [Mo2(cp)2(mu-SMe)3(mu-NH2)] (2) after consumption of 1 Fmol(-1) of 1+. In THF in the presence of acid, the reduction of 1+ occurs through a two-electron process. The presence of acid also results in the shift of the equilibrium between 1+ and amide dication 2(2+) (MeCN electrolyte) or induces an isomerisation of the imide ligand (THF electrolyte). This allows the electrolysis to be conducted at a potential 600 mV less negative than the reduction potential of 1+. Controlled-potential electrolyses in the presence of acid (2 equiv HTsO) produce the ammine derivative. Ammonia is released from these compounds either by coordination of the solvent (MeCN electrolyte) or by the binding of chloride to the ammine-tosylate complex (electrolyses in THF in the presence of acid and chloride). The final products, isolated almost quantitatively (>95%), are [Mo2(cp)2(mu-SMe)3(MeCN)2]+ and [Mo2(cp)2(mu-SMe)3(mu-Cl)], respectively.
Alkyl esters, imides and imido-esters of coronene-tri-, -tetra- and -octacarboxylic acids are accessible by a twofold oxidative benzogenic Diels-Alder reaction. Alkyl acrylates add to perylene, and maleic alkyl imides react twice with perylene as well as with perylene-tetracarboxylic tetraesters. Coronenes substituted with a greatly variable number of electron-withdrawing substituents are thus accessible, and di- and tetraimide derivatives are shown to be very pronounced electron-acceptor materials. The tri- and tetraalkyl esters and imidoesters self-assemble into columnar liquid-crystalline phases.
In the search for novel biodegradable antifouling agents, a series of imides (N-substituted maleimides and succinimides) have been synthesized. A large majority of N-substituted maleimides and succinimides showed an antimicrobial activity toward gram-positive and gram-negative bacteria and fungi of marine origin with minimal inhibition concentrations in the range of 6 to 24 microg/ml. The imides with an alkyl substituent showed higher activities than aromatic analogues, but structure-activity relationships were not clearly established. Some compounds were powerful inhibitors of Mytilus edulis phenoloxidase. This inhibition was noncompetitive as demonstrated with 2 maleimides, a 3-acetoxy succinimide and a succinimide. Thus, this family of products has potential interest as antifouling agents.
Divergent pathways are disclosed in the activation of 2-O-benzyl-1-hydroxy sugars by a reagent combination of CBr4 and Ph3P, all of which afford one-pot alpha-glycosylation methods. When this reagent is used in CH2Cl2, the 1-hydroxy sugar is converted to the alpha-glycosyl bromide in a conventional way and leads to the one-pot alpha-glycosylation method based on a halide ion-catalytic mechanism. In either DMF or a mixture of DMF and CHCl3, however, alternative alpha-glycosyl species are generated. From the 1H and 13C NMR study of the products, as well as the reactions using Vilsmeier reagents [(CH3)2N+=CHX]X- (X=Br and Cl), these were identified as cationic alpha-glycopyranosyl imidates having either Br- or Cl- counter ion. The cationic alpha-glycosyl imidate (Br-), derived specifically in the presence of DMF, is more reactive than the alpha-glycosyl bromide and thus is responsible for the accelerated one-pot alpha-glycosylation. The one-pot alpha-glycosylation methodology performed in DMF was assessed also with different types of acceptor substrates including tertiary alcohols and an anomeric mixture of 1-OH sugars.
The synthesis of novel cyclic glycosyl imidates and an investigation of their potential as donors in glycosidation reactions is described. The results show that 1,2-cis glycosides obtained from the reactions of glycosyl acetates or cyclic imidates, each derived from amides of glucuronic acid, result from the anomerisation of initially formed 1,2-trans glycosides.
In the field of our research programs concerning novel antimicrobial agents, a series of N-substituted imides was synthesized. These compounds were obtained by cyclization of amido-acids in acetic anhydride/sodium acetate or hexamethyldisilazane/zinc bromide for the hydroxy-aromatic derivatives. The hydroxy-alkyl maleimides were directly prepared by condensation of the corresponding amino-alcohol with maleic anhydride in boiling toluene. Most of N-substituted maleimides showed an interesting antimicrobial activity towards bacteria from the ATCC collection (Staphylococcus aureus ATCC 25923, Enterococcus faecalis ATCC 29212, Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853) but the MIC values for P. aeruginosa were always high (128 microg/ml). The imides with alkyl substituents showed higher activities than aromatic analogues with MIC values in the range of 8-32 microg/ml. Comparatively, succinimides were practically inactive.
The degradation properties of porous microspheres made using a new family of polyanhydride copolymers, the poly(anhydride-co-imides), were studied. Poly[trimellitylimido-L-tyrosine-co-sebacic acid-co-1,3-bis(carboxyphenoxy)propane] microspheres, with and without entrapped bovine serum albumin (BSA) as a model protein, were made using the double emulsion solvent evaporation process. Water penetration and anhydride bond cleavage (polymer degradation) occurred rapidly (< 5 days) compared to the time scale of overall microsphere erosion (weeks to months) with most polymer compositions. Subsequent to bond cleavage, the ultimate erosion of the microsphere and release of entrapped BSA was due mainly to the slow dissolution of the individual hydrophobic monomers (TMA-Tyr, SA and CPP) from the microsphere surface. BSA was released at approximately the same rate as the polymer eroded. Due to the fast degradation of anhydride bonds relative to microsphere erosion, initial polymer molecular weight did not have a significant effect on macromolecule release rates. Instead, monomer solubility correlated well with polymer erosion and BSA release rates. This erosion mechanism leads to predictable drug release rates which may be appropriate for the delivery of many protein therapeutics, including vaccine antigens. The anhydride-imide copolymers were well tolerated in acute toxicity studies in rats and therefore show promise as biomaterials.
The degradation and tissue compatibility characteristics of a novel class of biodegradable poly(anhydride-co-imide) polymers: poly[trimellitylimidoglycine-co-1,6-bis(carboxyphenoxy)hexan e] (TMA-gly: CPH) (in 10:90; 30:70 and 50: 50 molar ratios) and poly[pyromellitylimidoalanine-co-1,6-bis(carboxyphenoxy)hexa ne] (PMA-ala:CPH) (in 10:90 and 30:70 molar ratios) were investigated and compared with control poly(lactic acid/glycolic acid) (PLAGA in 50:50 molar ratio) matrices, a well-characterized biocompatible polymer, in rat subcutaneous tissues for 60 days. Polymers were compression-molded into circular discs of 14 mm x 1 mm in diameter. On post-operative days 7, 14, 28 and 60, histological tissue samples were removed, prepared by fixation and staining, and analyzed by light microscopy. PLAGA matrices produced mild inflammatory reactions and were completely degraded at the end of 60 days, leaving implant tissues that were similar to surgical wounds without implants. TMA-gly:CPH (10:90 and 30:70) matrices produced mild inflammatory reactions by the end of 60 days, similar to those seen with PLAGA. TMA-gly: CPH (50: 50) produced moderate inflammatory reactions characterized by macrophages and edema. PMA-ala:CPH matrices elicited minimal inflammatory reactions that were characterized by fibrous encapsulation by the end of 60 days. In vivo degradation rates of poly(anhydride-co-imides) were similar to PLAGA. Both PMA-ala:CPH and TMA-gly: CPH matrices maintained their shapes and degraded at a constant rate over the period of two months. These polymers, possessing good mechanical properties and tissue compatibility, may be useful in weight-bearing applications in bone.
Proton NMR spectra of proline-containing short peptides with N-terminal sequences of N-acetyl-prolyl- (Ac-Pro-) N-tert-butoxycarbonyl-phenylalanyl-prolyl- (Boc-Phe-Pro-) and N-tert-butoxycarbonyl-leucyl-prolyl- (Boc-Leu-Pro-) were measured in mixed solvents of hexadeuterodimethylsulfoxide and deuterochloroform (CDCl3). Population ratios of cis and trans conformers with respect to the proline imide bond and chemical shifts of NH protons were obtained as a function of a CDCl3 fraction of solvent. With increasing fraction of CDCl3, the trans percentages of the Ac-Pro-imide bonds increased. On the other hand, those of Boc-Phe-Pro- decreased, and those of Boc-Leu-Pro- exhibited middle tendency. From the solvent-dependent variation of the chemical shifts of the NH protons, intramolecular hydrogen bonds that stabilize the trans form of Ac-Pro- and the cis form of Boc-Phe-Pro- were discussed. For the Ac-Pro- peptides, only the trans forms are found to the compatible with 7-, 10-, and 13-membered hydrogen-bonded rings that would be similar to the ordinary secondary structures, gamma- and beta-turns and alpha-helix, respectively. For the cis form of Boc-Phe-Pro-R (R = O-methyl or glycyl-O-ethyl), the hydrogen-bonded structure is found to be similar to the type-VIa beta-turn. On the other hand, for Boc-Phe-Pro-Pro-Leu-Gly-NH2, it has been suggested that two different hydrogen bonds, which are different from that of the type-VIa beta-turn, support each other and cooperatively stabilize the cis form.
The first homoleptic alkaline earth bis(trifluoromethanesulfonyl)imide (Tf2N) complexes [mppyr]2[Ca(Tf2N)4], [mppyr]2[Sr(Tf2N)4], and [mppyr][Ba(Tf2N)3] were crystallized from a solution of the respective alkaline earth bis(trifluoromethanesulfonyl)imide and the ionic liquid [mppyr][Tf2N] (mppyr = 1,1-N-methyl-N-propylpyrrolidinium). In the calcium and strontium compounds, the alkaline earth metal (AE) is coordinated by four bidentately chelating Tf2N ligands to form isolated (distorted) square antiprismatic [AE(Tf2N)4]2- complexes which are separated by N-methyl-N-propylpyrrolidinium cations. In contrast, the barium compound, [mppyr][Ba(Tf2N)3], forms an extended structure. Here the alkaline earth cation is surrounded by six oxygen atoms belonging to three Tf2N- anions which coordinate in a bidentate chelating fashion. Three further oxygen atoms of the same ligands are linking the Ba2+ cations to infinite (infinity)(1)[Ba(Tf2N)3] chains.
We report a novel approach to prepare five- and six-membered heterocyclic compounds via a ring expansion of monoactivated methylenecyclopropanes (MCPs) with aldimines and aldehydes in the presence of MgI(2). Monoactivated MCPs behave as homo-Michael acceptors to afford bifunctional vinylogous enolates in the presence of MgI(2). The carbonyl moiety of the monoactivated MCP dramatically influences the reaction site in the dienolate with aryl aldimines and aldehydes as well as the size of the ring. Excellent divergent selectivity to five- vs. six-membered heterocycles is observed: alpha-alkylation/5-exo-tet cyclization (Z = NPh(2)) vs. gamma-alkylation/6-exo-trig cyclization (Z = 2-oxazolidone). Analogously, the reaction of the MCP imide with alkyl aldimines demonstrates the same selectivity by varying the size of electrophile or the reaction temperature. In addition, we observe the first example of the formation of the gamma-alkylation adduct in the reaction of a vinylogous imide enolate with a carbonyl compound.
3,4-Di-tert-butylthiophene 1-oxide (1a) reacted with a series of electron-deficient alkenic dienophiles at its syn-pi-face relating to the S=O bond to give [4+2] adducts in excellent yields. The 1-oxide 1a also reacted even with angle-strained dienophiles acenaphthylene and norbornene at its syn-pi-face to afford [4+2] adducts; in the latter case, norbornene reacted exclusively at its exo-pi-face. The oxide 1a reacted with dimethyl acetylenedicarboxylate to produce dimethyl 4,5-di-tert-butylphthalate in high yield with spontaneous extrusion of SO from the initial adduct even at room temperature. Similarly, 3,4-di-tert-butylthiophene 1-(p-toluenesulfonyl)imide (3a) reacted with alkenic dienophiles at its syn-pi-face relating to the S=N bond to give [4+2] adducts in good yields. The reaction of 3a with 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) afforded a 1,2-thiazetidine 12a, the first example of S-unoxidized 1,2-thiazetidine, in good yield, through rearrangement of the initial [4+2] adduct. The molecular structure of 12a is discussed on the basis of the X-ray crystallographic analysis. Comparison of the foregoing reactions leads to the conclusion that the 1-oxide 1a is more reactive as a diene than the 1-imide 3a, which is more reactive than 3,4-di-tert-butylthiophene 1,1-dioxide. The origin of the syn-pi-face selectivities of 1a and 3a in Diels-Alder reactions is discussed in terms of the orbital mixing rule and steric effect and also based on B3LYP/6-31G(d) calculations.
The Src homology 2 (SH2) domain of interleukin-2 tyrosine kinase (Itk) binds two separate ligands: a phosphotyrosine-containing peptide and the Itk Src homology 3 (SH3) domain. Binding specificity for these ligands is regulated via cis/trans isomerization of the Asn 286-Pro 287 imide bond in the Itk SH2 domain. In this study, we develop a novel method of analyzing chemical shift perturbation and cross-peak volumes to measure the affinities of both ligands for each SH2 conformer. We find that the cis imide bond containing SH2 conformer exhibits a 3.5-fold higher affinity for the Itk SH3 domain compared with binding of the trans conformer to the same ligand, while the trans conformer binds phosphopeptide with a 4-fold greater affinity than the cis-containing SH2 conformer. In addition to furthering the understanding of this system, the method presented here will be of general application in quantitatively determining the specificities of conformationally heterogeneous systems that use a molecular switch to regulate binding between multiple distinct ligands.
A major challenge in molecular electronics and related fields entails the fabrication of elaborate molecular architectures on electroactive surfaces to yield hybrid molecular/semiconductor systems. A method has been developed for the stepwise synthesis of oligomers of porphyrins linked covalently via imide units. A triallyl-porphyrin bearing an amino group serves as the base unit on Si(100), and the alternating use of a dianhydride (3,3',4,4'-biphenyltetracarboxylic dianhydride) and a porphyrin-diamine for reaction enables the rapid and simple buildup of oligomers composed of 2-5 porphyrins. The properties of these porphyrin "multad" films on Si(100) were interrogated using a variety of techniques. The charge densities of the redox-active porphyrin oligomers were determined via electrochemical methods. The stepwise growth was evaluated in detail via Fourier transform infrared (FTIR) spectroscopy and by selected X-ray photoelectron spectroscopic (XPS) studies. The morphology was probed via AFM methods. Finally, the thickness was evaluated by using a combination of ellipsometry and AFM height profiling, accompanied by selected XPS studies. Collectively, these studies demonstrate that high charge density, ultrathin, multiporphyrin films of relatively well-controlled thickness can be grown in a stepwise fashion using the imide-forming reaction. The increased charge densities afforded by the porphyrin multads may prove important for the fabrication of molecular-based information-storage devices. This bottom-up process for construction of surface-tethered molecular architectures complements the top-down lithographic approach for construction of functional devices with nanoscale dimensions.
Structure determinations of human aldose reductase holoenzyme in complex with the 2S4R-,2R4S- and 2R4R-isomers of the potent inhibitor Fidarestat ((2S,4S)-6-fluoro-2',5'-dioxospiro[chroman-4,4'-imidazoline]-2-carboxamide) were carried out in order to elucidate the binding modes responsible for the differences in their inhibitory potencies. In the complex structure with the 2R4S-isomer the cyclic imide moiety formed hydrogen bonds with the side-chains of Trp111, Tyr48 and His110. In the attempt to determine the complex structure with the least potent 2R4R-isomer this ligand was not observed, and instead, the active site was simultaneously occupied by two citrate molecules (occupancies of 60% and 40%). In the case of 2S4R, the active site was occupied by a citrate molecule which anchors the 2S4R-isomer from its carbamoyl group. The structures of the complexes suggest that the differences in the interactions between the cyclic imide rings and carbamoyl groups of the compounds with residues His110, Trp111, Trp219 and Cys298 account for differences in their inhibitory potencies.