Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Spray drying”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources
PubMed2002

Blend uniformity analysis using stream sampling and near infrared spectroscopy.

A near infrared spectroscopic method was developed to determine drug content in a 20% (wt/wt) ibuprofen and spray-dried hydrous lactose blend. A blending profile was obtained after blending for 0.5, 1, 3, 5, 10, and 20 minutes. Stream sampling was used to collect about 20 blend samples at each of the blending times from a laboratory scale V-blender. The samples collected were used to develop a near infrared calibration model. The calibration model was then used to determine the drug content of unknown samples from 2 validation blends. The validation blends were not included in the calibration model; they were used to evaluate the effectiveness of the calibration model. A total of 45 samples from the 2 validation blends were predicted by the near infrared calibration model and then analyzed by a validated UV spectrophotometric method. The root mean square error of prediction for the first validation blend was 5.69 mg/g and 3.30 mg/g for the samples from the second blend. A paired t test at the 95% confidence level did not indicate any differences between the drug content predicted by the near infrared spectroscopy (NIRS) method and the validated UV method for the 2 blends. The results show that the NIRS method could be developed while the blending profile is generated and used to thoroughly characterize a new formulation during development by analyzing a large number of samples. The new formulation could be transferred to a manufacturing plant with an NIRS method to facilitate blend uniformity analysis.

Calibration↗
PubMed2003

The 3-D model: comparison of parameters obtained from and by simulating different tableting machines.

The aim of this study is to apply 3-D modeling to data obtained from different tableting machines and for different compression wheels on a linear rotary tableting machine replicator. A new analysis technique to interpret these data by 3-D parameter plots is presented. Tablets were produced on an instrumented eccentric tableting machine and on a linear rotary tableting machine replicator. The materials used were dicalcium phosphate dihydrate (DCPD), spray-dried lactose, microcrystalline cellulose (MCC), hydroxypropyl methylcellulose (HPMC), and theophylline monohydrate. Tableting was performed to different maximum relative densities (rho (rel, max)). Force, time, and displacement were recorded during compaction. The 3-D data plots were prepared using pressure, normalized time, and porosity according to Heckel. A twisted plane was fitted to these data according to the 3-D modeling technique. The resulting parameters were analyzed in a 3-D parameter plot. The results show that the 3-D modeling technique can be applied to compaction cycles from different tableting machines as different as eccentric and rotary tableting machines (simulated). The relation of the data to each other is the same even when the absolute values are different. This is also true for different compression wheels used on the linear rotary tableting machine replicator. By using compression wheels of different sizes on this simulator, mainly time plasticity changes. By using bigger compression wheels for simulation, the materials deform slower at lower densification and they deform faster at higher densification. For brittle materials, the stages of higher densification are influenced; for plastically deforming materials, the stages of lower and higher densification can be influenced.

Computer Simulation↗
PubMed2003

Effect of shape of sodium salicylate particles on physical property and in vitro aerosol performance of granules prepared by pressure swing granulation method.

The purpose of this research was to investigate the effect of the shape of sodium salicylate (SS) particles on the physical properties as well as the in vitro aerosol performance of the granules granulated by the pressure swing granulation method. SS was pulverized with a jet mill (JM) to prepare the distorted particles, and SS aqueous solution was spray dried (SD) to prepare the nearly spherical particles. The particle size distribution, crushing strength, and pore size distribution of the granules were measured. The adhesive force of the primary particles in the granules was calculated according to Rumpf's equation. The in vitro aerosol performance of the granules was evaluated using a cascade impactor. Both JM and SD particles can be spherically granulated by the pressure swing granulation method without the use of a binder. The size of SD granules was smaller than that of JM granules. Although the crushing strength of the JM and SD granules is almost the same, the internal structures of JM granules and SD granules were found to differ, and the SD particles appear to have been condensed uniformly, resulting in a nearly spherical shape. In the inhalation investigation, the percentage of SS particles of appropriate size delivered to the region for treatment was noticeably higher for SD granules than for JM granules. This finding might be because the adhesive force of the SD primary particles was smaller than that of the JM primary particles in the granules and because the SD granules could be easily separated by air current to obtain the primary particles.

Aerosols↗
PubMed2004

A novel approach in the assessment of polymeric film formation and film adhesion on different pharmaceutical solid substrates.

The purpose of this study was to evaluate the nature of film formation on tablets with different compositions, using confocal laser scanning microscopy (CLSM), and to measure film adhesion via the application of a novel "magnet probe test." Three excipients, microcrystalline cellulose (MCC), spray-dried lactose monohydrate, and dibasic calcium phosphate dihydrate, were individually blended with 0.5% magnesium stearate, as a lubricant, and 2.5% tetracycline HCl, as a fluorescent marker, and were compressed using a Carver press. Tablets were coated with a solution consisting of 7% hydroxypropyl methylcellulose (HPMC) phthalate (HP-55), and 0.5% cetyl alcohol in acetone and isopropanol (11:9). The nature of polymer interaction with the tablets and coating was evaluated using CLSM and a designed magnet probe test. CLSM images clearly showed coating efficiency, thickness, and uniformity of film formation, and the extent of drug migration into the film at the coating interfaces of tablets. Among the excipients, MCC demonstrated the best interface for both film formation and uniformity in thickness relative to lactose monohydrate and dibasic calcium phosphate dihydrate. The detachment force of the coating layers from the tablet surfaces, as measured with the developed magnet probe test, was in the order of MCC>lactose monohydrate>dibasic calcium phosphate dihydrate. It was also shown that the designed magnet probe test provides reliable and reproducible results when used for measurement of film adhesion and bonding strength.

Adhesiveness↗
PubMed2004

Hydrophilic excipients modulate the time lag of time-controlled disintegrating press-coated tablets.

An oral press-coated tablet was developed by means of direct compression to achieve the time-controlled disintegrating or rupturing function with a distinct predetermined lag time. This press-coated tablet containing sodium diclofenac in the inner core was formulated with an outer shell by different weight ratios of hydrophobic polymer of micronized ethylcellulose (EC) powder and hydrophilic excipients such as spray-dried lactose (SDL) or hydroxypropyl methylcellulose (HPMC). The effect of the formulation of an outer shell comprising both hydrophobic polymer and hydrophilic excipients on the time lag of drug release was investigated. The release profile of the press-coated tablet exhibited a time period without drug release (time lag) followed by a rapid and complete release phase, in which the outer shell ruptured or broke into 2 halves. The lag phase was markedly dependent on the weight ratios of EC/SDL or EC/HPMC in the outer shell. Different time lags of the press-coated tablets from 1.0 to 16.3 hours could be modulated by changing the type and amount of the excipients. A semilogarithmic plot of the time lag of the tablet against the weight ratios of EC/SDL or EC/HPMC in the outer shell demonstrated a good linear relationship, with r = 0.976 and r = 0.982, respectively. The predetermined time lag prior to the drug release from a press-coated tablet prepared by using a micronized EC as a retarding coating shell can be adequately scheduled with the addition of hydrophilic excipients according to the time or site requirements.

Compressive Strength↗
PubMed2004

Tablet formulation containing meloxicam and beta-cyclodextrin: mechanical characterization and bioavailability evaluation.

The purpose of this research was to evaluate beta-cyclodextrin (beta-CD) as a vehicle, either singly or in blends with lactose (spray-dried or monohydrate), for preparing a meloxicam tablet. Aqueous solubility of meloxicam in presence of beta-CD was investigated. The tablets were prepared by direct compression and wet granulation techniques. The powder blends and the granules were evaluated for angle of repose, bulk density, compressibility index, total porosity, and drug content. The tablets were subjected to thickness, diameter, weight variation test, drug content, hardness, friability, disintegration time, and in vitro dissolution studies. The effect of beta-CD on the bioavailability of meloxicam was also investigated in human volunteers using a balanced 2-way crossover study. Phase-solubility studies indicated an A(L)-type diagram with inclusion complex of 1:1 molar ratio. The powder blends and granules of all formulations showed satisfactory flow properties, compressibility, and drug content. All tablet formulations prepared by direct compression or wet granulation showed acceptable mechanical properties. The dissolution rate of meloxicam was significantly enhanced by inclusion of beta-CD in the formulations up to 30%. The mean pharmacokinetic parameters (C(max), K(e), and area under the curve [AUC](0-infinity)) were significantly increased in presence of beta-CD. These results suggest that beta-CD would facilitate the preparation of meloxicam tablets with acceptable mechanical properties using the direct compression technique as there is no important difference between tablets prepared by direct compression and those prepared by wet granulation. Also, beta-CD is particularly useful for improving the oral bioavailablity of meloxicam.

Adult↗
PubMed2005

Effect of polysulfonate resins and direct compression fillers on multiple-unit sustained-release dextromethorphan resinate tablets.

The purpose of this work was to investigate the effect of different polysulfonate resins and direct compression fillers on physical properties of multiple-unit sustained-release dextromethorphan (DMP) tablets. DMP resinates were formed by a complexation of DMP and strong cation exchange resins, Dowex 50 W and Amberlite IRP69. The tablets consisted of the DMP resinates and direct compression fillers, such as microcrystalline cellulose (MCC), dicalcium phosphate dihydrate (DCP), and spray-dried rice starch (SDRS). Physical properties of tablets, such as hardness, disintegration time, and in vitro release, were investigated. A good performance of the tablets was obtained when MCC or SDRS was used. The use of rod-like and plate-like particles of Amberlite IRP69 caused a statistical decrease in tablet hardness, whereas good tablet hardness was obtained when spherical particle of Dowex 50 W was used. The plastic deformation of the fillers, such as MCC and SDRS, caused a little change in the release of DMP. A higher release rate constant was found in the tablets containing DCP and Dowex 50 W, indicating the fracture of the resinates under compression, which was attributable to the fragmentation of DCP. However, the release of DMP from the tablets using Amberlite IRP69 was not significantly changed because of the higher degree of cross-linking of the resinates, which exhibited more resistance to deformation under compression. In conclusion, the properties of polysulfonate resin, such as particle shape and degree of cross-linking, and the deformation under compaction of fillers affect the physical properties and the drug release of the resinate tablets.

Compressive Strength↗
PubMed2003

Chitosan salts as nasal sustained delivery systems for peptidic drugs.

The aim of this study was to describe a sustained drug release system based on chitosan salts for vancomycin hydrochloride delivery. Chitosan lactate, chitosan aspartate, chitosan glutamate and chitosan hydrochloride were prepared by spray-drying technique. Vancomycin hydrochloride was used as a model peptidic drug, the nasal sustained release of which should avoid first-pass metabolism in the liver. This in-vitro study evaluated the influence of chitosan salts on the release behaviour of vancomycin hydrochloride from the physical mixtures at pH 5.5 and 7.4. In-vitro release of vancomycin was retarded by chitosan salts and, in particular, chitosan hydrochloride provided the lowest release of vancomycin.

Administration, Intranasal↗
PubMed1995

Application of curdlan to controlled drug delivery. II. In vitro and in vivo drug release studies of theophylline-containing curdlan tablets.

Tablets (300 mg) having two different surface areas were prepared from spray-dried particles of curdlan (100 mg)/theophylline(200 mg). Drug release from the tablets was studied in vitro and in vivo. The in vitro drug release from a tablet with a larger surface area (Tab L) was faster than that with a smaller one (Tab S). The water uptake of Tab L was larger than that of Tab S, probably due to the difference in the tablets' surface areas. However, the water uptake was not a rate-determining step for the drug release from curdlan tablets containing a large amount of theophylline. A straight line was obtained when release % was plotted vs. time. The slope of each curve was calculated as 0.59 for Tab L and 0.58 for Tab S. This indicates that the release mechanism is non-Fickian diffusion controlled. In addition, the curdlan tablets or theophylline powder were administered orally to 5 healthy volunteers, and saliva concentrations of theophylline were determined. Each saliva concentration was converted to plasma concentration using the saliva to plasma ratio of the drug in each subject. The AUC of Tab L was nearly the same as that of powder, while the AUC of Tab S was smaller than that of powder. The mean residence times (MRTs) of theophylline powder, Tab S and Tab L were 11.1 +/- 1.5, 25.4 +/- 6.3 and 17.1 +/- 1.5 h (N = 4-5, mean +/- S.D.), respectively.(ABSTRACT TRUNCATED AT 250 WORDS)

Biological Availability↗
PubMed2001

Inhibitory action of Oren-gedoku-to extract on enzymatic lipid peroxidation in rat liver microsomes.

We examined the inhibitory action of the extract of Oren-gedoku-to, a traditional herbal medicine known to act as an antioxidant, on enzymatic lipid peroxidation in rat liver microsomes. Simultaneous addition of a spray-dried preparation of Oren-gedoku-to extract (Tsumura TJ-15) inhibited enzymatic lipid peroxidation induced by reduced beta-nicotinamide adenine dinucleotide phosphate (NADPH) and ADP/Fe3+ complex in liver microsomes in a dose-dependent manner. When the inhibition by TJ-15 of enzymatic lipid peroxidation in liver microsomes was kinetically analyzed, this medicine showed a competitive inhibition against NADPH or ADP/Fe3+ complex. TJ-15 inhibited the NADPH-driven enzymatic reduction of ADP/Fe3+ complex or cytochrome c in liver microsomes competitively. TJ-15 enhanced NADPH consumption by liver microsomes with ADP/Fe3+ complex. Treatment with TJ-15 after the onset of enzymatic lipid peroxidation in liver microsomes inhibited the progression of lipid peroxidation in a dose-dependent manner. The present results indicate that Oren-gedoku-to extract inhibits enzymatic lipid peroxidation in rat liver microsomes in the initiation and propagation steps in a dose-dependent manner. These results also suggest that Oren-gedoku-to extract inhibits enzymatic lipid peroxidation in rat liver microsomes not only through its antioxidant action but also through reduction of the supply of electrons derived from NADPH to ADP/Fe3+ complex in liver microsomes both in a competitive manner and through stimulation of NADPH oxidation.

Adenosine Diphosphate↗
PubMed2006

Pharmacological differences between Liu-Jun-Zi-Tang, a traditional Chinese herbal medicine, and domperidone on isolated guinea-pig ileum.

The different characteristics of Liu-Jun-Zi-Tang, a spray-dried powdered extract from 8 Chinese herbs, and domperidone, a D2 antagonist, both of which are used clinically for the treatment of gastritis, were validated in isolated guinea pig ileal longitudinal muscle. Liu-Jun-Zi-Tang at 0.05 mg/ml did not affect the twitch response by electrical field stimulation, but it concentration-dependently inhibited the twitch response at concentrations of 0.1 and 1.0 mg/ml, and maximum inhibition occurred 5 min after application of Liu-Jun-Zi-Tang. In the presence of Liu-Jun-Zi-Tang, the concentration-response curve for ACh-contraction showed inhibition in a non-competitive manner, which is the same as domperidone. In the presence of Liu-Jun-Zi-Tang (1.0 mg/ml), ACh (10(-7) M)-, histamine (5x10(-7) M)- and barium chloride (10(-4) M)-induced basal contractions were inhibited by 24, 19 and 54 %, respectively. On the other hand, in the presence of domperidone (2x10(-5) M), ACh- and barium chloride-induced basal contractions were inhibited by 28 and 63%, respectively, similar to that in the presence of Liu-Jun-Zi-Tang. However, the inhibition of histamine-induced contraction in the presence of domperidone was significantly increased (81%) compared with that in the presence of Liu-Jun-Zi-Tang. These findings suggest that Liu-Jun-Zi-Tang has milder effects on histamine-induced disorders than domperidone. In other words, domperidone has a more potent effect on histamine-induced disorders.

Acetylcholine↗
PubMed1996

Oral absorption improvement of poorly soluble drug using solid dispersion technique.

A new triazol antifungal agent, (+)-2-(2,4-difluorophenyl)-3-methyl-1-(1H-1, 2,4-triazol-1-yl)-3-[6-(1H-1,2,4-triazol-1-yl)pyridazin++ +-3-ylthio]butan-2-ol (MFB-1041), shows poor oral absorption and is practically insoluble in water (1.2 micrograms/ml). Solid dispersion systems with an enteric polymer such as hydroxypropylmethylcellulose phthalate (HP-55) and carboxymethylethylcellulose (CMEC), and a nonenteric polymer, hydroxypropylmethylcellulose (Metolose) were evaluated to improve drug absorption and solubility. The oral bioavailabilities of these solid dispersions in beagle dogs were over 6 times higher than that of a suspension system with increasing drug solubility in an alkaline medium. X-Ray powder diffraction measurement of the solid dispersion showed a complete drug phase change from a crystal to an amorphous state. Further, from the results of a stability test, the preparations were stable in a desiccated condition and the absorption profiles also showed no change. From the results, it was suggested that the oral administrative preparation of MFB-1041 having a superior absorption profile and a high stability could be obtained by a drug phase change from a crystal to an amorphous state, especially in the spray-drying method using enteric polymers.

Animals↗
PubMed2000

Effects of aging on crystallization, dissolution and absorption characteristics of amorphous tolbutamide-2-hydroxypropyl-beta-cyclodextrin complex.

The effects of storage on the crystallization, dissolution and absorption of tolbutamide from amorphous tolbutamide-2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD) complex were investigated, in comparison with those of polyvinylpyrrolidone (PVP) solid dispersion. The amorphous solid complex of tolbutamide with HP-beta-CyD and the solid dispersion of tolbutamide with PVP were prepared by a spray-drying method. During storage, a stable form of tolbutamide (form I) was crystallized from the amorphous PVP dispersion, whereas a metastable form of tolbutamide (form II) was crystallized from the HP-beta-CyD complex. The dissolution rate of tolbutamide from both HP-beta-CyD complex and PVP dispersion was significantly faster than that of tolbutamide alone. However, the dissolution rate from the PVP dispersion markedly decreased with storage, because of the formation of slow dissolving form I crystals. On the other hand, the dissolution rate from the HP-beta-CyD complex was only slightly decreased due to the formation of fast dissolving formII crystals. These in vitro dissolution characteristics were clearly reflected in the in vivo absorption of tolbutamide and the glucose plasma level after oral administration in dogs. The results suggested that HP-beta-CyD is useful not only for converting crystalline tolbutamide to an amorphous substance, but also for maintaining the fast dissolution rate of the drug over a long period. Furthermore, the crystallization of drugs from CyD complexes, with storage, seemed to be different from that involving polymer excipients such as PVP.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2005

Tabletting of solid dispersion particles consisting of indomethacin and porous silica particles.

We attempted to make the rapidly dissolving tablet (Tab) containing solid dispersion particles (SD) with indomethacin (IMC) and porous silica (Sylysia350) as carrier prepared by using spray-drying technique. Rapidly dissolving tablet was formulated with mannitol as a diluent and low substituted hydroxypropylcellulose (L-HPC) or partly pre-gelatinized starch (PCS) as a disintegrant. The percent dissolved from Tab (SD) was higher than that of tablet containing physical mixture (PM) at 20 min. Nearly 100% of drug in Tab (SD) was dissolved within 60 min, while the drug dissolution of Tab (PM) was not completed at the same time period. In addition, the tensile strength of Tab (SD) was much higher than that of Tab (PM). Adding L-HPC in Tab (SD) (Tab (SD-L-HPC)), the percent dissolved from Tab (SD-L-HPC) at 5 min became much higher than that from Tab (SD). The dissolution profile of IMC from Tab (SD-L-HPC) was almost the same irrespective of the compression pressure, while the tensile strength of tablet increased with increasing the compression pressure. In comparing the compaction property of these tablets by observing the ratio of residual die wall pressure (RDP) to maximum die wall pressure (MDP) (RDP/MDP), it was found that addition of L-HPC in the tablet formulation improved compactibility. In case that PCS was formulated as disintegrant, Tab (SD-PCS), similar improvement in the dissolution profile and tensile strength was observed, though the dissolution rate of IMC from Tab (SD-PCS) was slightly lower than that from Tab (SD-L-HPC) irrespective of the compression pressure.

Compressive Strength↗
PubMed2006

Improvement of solubility and oral bioavailability of 2-(N-cyanoimino)-5-[(E)-4-styrylbenzylidene]-4-oxothiazolidine (FPFS-410) with antidiabetic and lipid-lowering activities in dogs by 2-hydroxypropyl-beta-cyclodextrin.

2-(N-Cyanoimino)-5-[(E)-4-styrylbenzylidene]-4-oxothiazolidine (FPFS-410) is a newly synthesized thiazolidine derivative having not only antidiabetic but also lipid-lowering activities. However, this compound has an extremely low aqueous solubility (2.8 (+/-0.33) x 10(-8) M (0.0094+/-0.0011 microg/ml) in 1.0 M phosphate buffer (pH 7.0) at 25 degrees C). In this study, we investigated the effect of various hydrophilic cyclodextrins (CyDs) on the solubility of FPFS-410 to select a CyD suitable for formulations of the compound. Among various CyDs, 2-hydroxypropyl-beta-CyD (HP-beta-CyD) had the highest solubilizing ability to FPFS-410, e.g., the solubility of the compound was increased 200000-fold by the addition of 40 mM HP-beta-CyD, which was attributable to the formation of the 1 : 2 (guest : host) inclusion complexes. The interaction of HP-beta-CyD with FPFS-410 was studied using 1H-nuclear magnetic resonance (NMR) spectroscopies including ROESY spectroscopy and a molecular modeling calculation. These results suggested that HP-beta-CyD forms a 1:2 (guest : host) inclusion complex with FPFS-410 by including both the stilbene and thiazolidine moieties. FPFS-410/HP-beta-CyD solid complexes with various stoichiometries were prepared by the spray drying and cogrinding methods, and confirmed by powder X-ray diffractometry that these complexes are in an amorphous state. The dissolution of FPFS-410 in water was significantly accelerated by the complexation with HP-beta-CyD. In vivo studies revealed that HP-beta-CyD markedly increases the bioavailability of FPFS-410 after oral administration in dogs. The present results suggest that HP-beta-CyD is useful for improvement of the extremely low bioavailability of FPFS-410.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed1996

Passage of chicken egg yolk antibody treated with hydroxypropyl methylcellulose phthalate in the gastrointestinal tract of calves.

Two types of chicken egg yolk antibody samples for oral passage trials in calves were prepared: (1) hydroxypropyl methylcellulose phthalate (HPMCP) antibody powder (HAP)--a powder produced by spray-drying a supernatant obtained after precipitation of lipids from egg yolk with HPMCP and (2) control antibody power (CAP)--a powder produced from an antibody solution with HPMCP. Antibody activity and pattern of distribution of both antibody preparations in the gastrointestinal tract of calves were compared by enzyme-linked immunosorbent assay. At 2 hr post administration, anti-K99 fimbrial antibodies from both the CAP and the HAP were detected in the abomasum of calves with titers of 1:128 and 1:256, respectively. However, at 4 hr, anti-K99 fimbrial titers of the CAP and the HAP were reduced to 1:2 and 1:64, respectively, due to digestion in the abomasum. These results indicated that the egg yolk antibody powder with HPMCP was more resistant against gastric juice in the stomach, thereby, ensuring a transfer of functional antibodies to the small intestine of calves after oral administration.

Abomasum↗
PubMed2006

The preparation of ciprofloxacin hydrochloride-loaded chitosan and pectin microspheres: their evaluation in an animal osteomyelitis model.

Ciprofloxacin hydrochloride-loaded microspheres were prepared by a spray-drying method using pectin and chitosan. The effects of different polymers and drug ratios were investigated. The most appropriate carriers were selected by in vitro testing. A rat methicillin-resistant Staphylococcus aureus osteomyelitis model was used to evaluate the effects of the loaded microspheres. The drug was released rapidly from the pectin carrier but this was more sustained in the chitosan formulation.Chitosan microspheres loaded with ciprofloxacin hydrochloride were more effective for the treatment of osteomyelitis than equivalent intramuscular antibiotics.

Animals↗
PubMed2005

Red-excitation dispersive Raman spectroscopy is a suitable technique for solid-state analysis of respirable pharmaceutical powders.

Dispersive Raman spectroscopy with excitation by a red diode laser is suitable for quantitative crystallinity measurements in powders for pulmonary drug delivery. In spray-dried mixtures of salmon calcitonin and mannitol, all three crystalline polymorphs of mannitol and amorphous mannitol were unambiguously identified and their mass fractions were measured with a limit of quantification of about 5%. The instrument design offered high sensitivity and adequate background suppression, resulting in a low limit of detection in the range of 0.01% to 1%. This spectroscopy method has significant advantages over established techniques regarding specificity, sensitivity, and sample requirements.

Administration, Inhalation↗