SEARCH · Search PubMed

Results for “Imides”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

PubMed2006

Synthesis and optical and redox properties of core-substituted naphthalene diimide dyes.

2,6-Dichloronaphthalene dianhydride has been synthesized by a modified procedure. The imidization of this dichlorinated anhydride with amines and subsequent stepwise nucleophilic exchange of the chlorine atoms by alkyl- or arylamines afforded a series of hitherto unknown monoamino- and diamino-substituted naphthalene diimides. An alternative route for the synthesis of diamino-substituted naphthalene diimides is also reported. Optical and electrochemical properties of the newly synthesized amino-functionalized naphthalene diimides were studied in detail. The absorption maxima (530-620 nm) of these dyes are appreciably bathochromically shifted compared to those of the corresponding core-unsubstituted compounds. At the naphthalene core alkylamino-substituted diimides exhibit fluorescence quantum yields up to 60%.

Journal Article↗

PubMed2006

Stereoselective preparation of a cyclopentane-based NK1 receptor antagonist bearing an unsymmetrically substituted sec-sec ether.

A highly efficient synthesis of the potent and selective NK-1 receptor antagonist 1 is described. The key transformation involved the etherification reaction between cyclopentanol 12 and chiral imidate 30 which was catalyzed by HBF4 to initially give ether 14 as a 17:1 mixture of diastereomers and in 75% combined yield. The diastereoselectivity was upgraded to 109:1 by crystallization of the triethylamine solvate 44 which was isolated in 54% yield from 12. Mechanistic studies confirmed that the etherification reaction proceeds through an unprecedented S(N)2 reaction pathway under typical S(N)1 reaction conditions.

Cyclopentanes↗

PubMed2006

Expanding the scope of the acyl-type radical addition reactions promoted by SmI2.

N-acyl oxazolidinones of simple carboxylic acids and amino acids were observed to undergo successful SmI2-promoted couplings with substituted acrylamides and acrylates, affording a variety of functionalized gamma-ketoamides and -esters with yields attaining 85%. As many of these reductive couplings were previously found to be ineffective employing the corresponding 4-pyridylthio esters, the applicability of this methodology has been substantially improved. The methodology has been adapted to prepare structures related to two potent aspartate protease inhibitors, the renin inhibitor aliskiren, and the gamma-secretase inhibitor L-685,458. Finally, a convenient two-step procedure for the preparation of N-acyl oxazolidinones of N-protected amino acids, which provides consistently good yields of the corresponding imide, has been devised.

Proteins↗

PubMed2007

Rearrangement of 1,3-dipolar cycloadducts derived from bis(phenylazo)stilbene: a DFT level mechanistic investigation.

The 1,3-dipolar cycloaddition of bis(phenylazo)stilbene with activated ethene and ethyne derivatives and the subsequent rearrangement of the cycloadducts have been studied using model compounds at the B3LYP/6-31G(d) level of density functional theory (DFT). From the structural and electronic features, a five-membered zwitterionic ring system 9 (1,2,3-triazolium-1-imide system) formed from bis(phenylazo)ethylene is confirmed as the active 1,3-dipole species in the reaction. Formation of the 1,3-dipolar cycloadduct from the alkyne derivative is found to be 26.0 kcal/mol exergonic, and it requires an activation free energy of 19.4 kcal/mol. The 1,3-cycloadduct formed in the reaction undergoes a very facile migration of a nitrogen-bearing fragment, passing through a zwitterionic transition state. A small activation free energy of 8.2 kcal/mol is observed for this step of the reaction, and it is 19.6 kcal/mol exergonic. Further activation of the newly formed rearranged product is possible under elevated temperatures, again passing through a zwitterionic transition state and resulting in the formation of 2,5-dihydro-1,2,3-triazine derivatives. Such derivatives have been recently reported by Butler et al. (J. Org. Chem. 2006, 71, 5679). The charge separation in 9 and the zwitterionic transition states are stabilized through the pi-system of the phenyl rings and the carbonyl groups. Similar structural, electronic, and mechanistic features are obtained for the reaction of 9 with the ethylenic dipolarophile acrylonitrile. Molecular electrostatic potential analyses of the 1,3-dipole and the zwitterionic transitions states are found to be very useful for characterizing their electron delocalization features. The solvation effects can enhance the feasibility of these reactions as they stabilize the zwitterionic transition states to a great extent.

Cyclization↗

PubMed1996

Enantioselective Synthesis of L- and D-Carboranylalanine.

The enantioselective synthesis of L- and D-carboranylalanine is reported. Imides 13 and 14 are treated with titanium tetrachloride, DIEA, and NBS to introduce a bromo functionality in 98:2 ratio at the alpha-center. Azide displacement with TMGA, displacement of the oxazolidinone template with titanium tetrabenzyloxide, and subsequent hydrogenolysis permits L- or D-carboranylalanine to be isolated in high stereoselectivity and 35-40% yields overall.

Journal Article↗

PubMed1996

Synthetic, Mechanistic, and Structural Studies Related to 1,2,4-Dithiazolidine-3,5-dione.

Reaction of O-ethyl thiocarbamate (4) with (chlorocarbonyl)sulfenyl chloride (5) gives 3-ethoxy-1,2,4-dithiazolin-5-one (2) and 3,5-diethoxy-1,2,4-thiadiazole (3), with the relative amounts of 2 and 3 formed depending very much on the solvent (e.g., diethyl ether favors 2; chloroform favors 3). The effects of added base, order of addition, concentration, and temperature were also studied. Mechanisms for the observed transformations have been proposed and are supported by the characterization of relatively unstable acyclic intermediates, e.g., formimidoyl(chlorocarbonyl)disulfane 8, symmetrical bis(formimidoyl)disulfane 10, and ethoxythiocarbonyl imidate 11, which are obtained under alternative conditions. Compound 2 is converted with concentrated aqueous hydrochloric acid upon short reflux to 1,2,4-dithiazolidine-3,5-dione (1), rearranges upon prolonged melting to give principally N-ethyl-1,2,4-dithiazolidine-3,5-dione (13), and is desulfurized with various trivalent phosphorus compounds to yield O-ethyl cyanate (15) plus carbonyl sulfide. X-ray crystallographic structures of 1 and 2 have been solved; the planarity and aromatic character of these molecules help to explain some of their reactions.

Journal Article↗

PubMed1997

Amide-Assisted Hydrolysis of beta-Carboxamido-Substituted Phosphinic Acid Esters.

Phosphinic acids are of interest due to their ability to inhibit metalloproteases. The hydrolysis of a phosphinic acid ester is typically one of the final steps in the synthesis of such inhibitors. We have found that the acid-catalyzed hydrolysis of a phosphinic acid ester containing a beta-carboxamido group is facilitated by the presence of the amide. The promotion of the hydrolysis is dependent on the electron density of the amide suggesting the intermediacy of a cyclic imidate structure (C). The hydrolysis of phosphinic acid esters containing a beta-carboxamido group is conveniently and quantitatively effected by treating the ester with 10:90 H(2)O:TFA.

Journal Article↗

PubMed1998

An Activated Germanium Metal-Promoted, Highly Diastereoselective Reformatsky Reaction.

Activated germanium metal, prepared by the reduction of germanium(II) iodide with potassium metal, was found to promote the Reformatsky reaction effectively under mild conditions. In the presence of activated germanium metal, the reactions of alpha-bromo ketones 2a and 2b and alpha-bromo imides 2e and 2f with benzaldehyde (1a) proceeded smoothly to give the corresponding beta-hydroxy carbonyl compounds 3a, 3b, 3e and 3f, respectively, in good yields and with good syn diastereoselectivity. The activated germanium metal-promoted, asymmetric Reformatsky reaction of enantiomerically pure-oxazolidinone derivatives 2g-j with various aldehydes 1a-d was also examined; the highest diastereoselectivity was achieved when (1S,2R)-2-amino-1,2-diphenylethanol-derived 2j was used as the Reformatsky donor. The excellent diastereoselectivity could be explained in terms of the formation of a chairlike, six-membered transition state between the aldehyde and enolate as in the Zimmerman-Traxler model. A single recrystallization of the Reformatsky adducts, followed by hydrolysis and subsequent esterification, led to enantiomerically pure methyl 3-hydroxy-2-methylalkanoates 10j-m, with almost quantitative recovery of the enantiomerically pure 2-oxazolidinone 14.

Journal Article↗

PubMed1999

Total Synthesis of Myxalamide A.

The polyene antibiotic myxalamide A (1) has been prepared by total synthesis. The synthesis illustrates a useful strategy for synthesis in which the high 1,2-stereocontrol achievable with the aldol reaction can be parlayed by other stereoselective processes so as to give compounds having two or more stereocenters with remote relationships. Application of the Evans asymmetric aldol reaction to aldehyde 13 gives the beta-hydroxy imide 17. Because the substrate is an alpha,beta-unsaturated aldehyde, the alcohol is allylic. After suitable functional group manipulation, this allylic alcohol is subjected to enolate Claisen rearrangement (as propionate 22) to give allylsulfide 23, having three stereocenters with a 1,4,5-relationship. Further functional group manipulation and one-carbon homologation converts this intermediate into 26, which is oxidized and subjected to Evans-Mislow allylsulfoxide rearrangement to obtain 27, having three stereocenters with a 1,2,5-relationship. The synthesis of myxalamide A was completed by converting aldehyde 30 into dienyne 40. Alkyne 40 was hydroborated with catechol borane, and the resulting E-vinylborane was subjected to Suzuki coupling with the Z-iodo triene 9 to provide myxalamide A (1).

Journal Article↗

PubMed1999

Homoarcyriaflavin: Synthesis of Ring-Expanded Arcyriaflavin Analogues.

The construction of the ring-expanded carbazole system, forming arcyriaflavin homologues, is efficiently accomplished by the reaction of 2,2'-bridged bis-indoles with 3,4-dibromo-2,5-dihydro-1H-2,5-pyrroledione derivatives under Grignard conditions. A ring size of up to nine members in the central ring is achievable. Substitutions either at the indole system or at the imide-N are also possible. The conformation of homoarcyriaflavins as a cross-link between the rigid arcyriaflavins and the flexible arcyriarubins was investigated by NMR, X-ray, and semiempiric quantum chemical calculation methods.

Journal Article↗

PubMed1999

Aryliminopropadienone-C-Amidoketenimine- Amidinoketene-2-Aminoquinolone Cascades and the Ynamine-Isocyanate Reaction.

Imidoylketenes 11 and oxoketenimines 12 are generated by flash vacuum thermolysis of Meldrum's acid derivatives 9, pyrrolediones 17 and 18, and triazole 19 and are observed by IR spectroscopy. Ketenimine-3-carboxylic acid esters 12a are isolable at room temperature. Ketenes 11 and ketenimines 12 undergo rapid interconversion in the gas phase, and the ketenes cyclize to 4-quinolones 13. When using an amine leaving group in Meldrum's acid derivatives 9c, the major reaction products are aryliminopropadienones, ArN=C=C=C=O (15). The latter react with 1 equiv of nucleophile to produce ketenimines 12 and with 2 equiv to afford malonic acid imide derivatives 16. N-Arylketenimine-C-carboxamides 12c cyclize to quinolones 13c via the transient amidinoketenes 11c at temperatures of 25-40 degrees C. This implies rapid interconversion of ketenes and ketenimines by a 1,3-shift of the dimethylamino group, even at room temperature. This interconversion explains previously poorly understood outcomes of the ynamine-isocyanate reaction. The solvent dependence of the tautomerism of 4-quinolones/4-quinolinols is discussed. Rotational barriers of NMe(2) groups in amidoketenimines 12c and malonioc amides and amidines 16 (24) are reported.

Journal Article↗

PubMed1999

Novel Syntheses of 2-Butyl-5-chloro-3H-imidazole-4-carbaldehyde: A Key Intermediate for the Synthesis of the Angiotensin II Antagonist Losartan.

Reaction of glycine methyl ester (19) with imidate 18 under carefully optimized conditions allowed preparation of the rather unstable imidazolinone 11 in ca. 90% yield. Reaction of 11 with POCl(3)/DMF followed by aqueous workup gave aldehyde 2, a key intermediate for the synthesis of the angiotensin II antagonist Losartan, in ca. 55% yield. Structural identification of intermediates and byproducts formed during both the reaction to prepare 11 and the reaction of 11 with POCl(3)/DMF allowed development of several closely related syntheses of aldehyde 2.

Journal Article↗

PubMed2000

Modeling of protonation processes in acetohydroxamic acid

This work presents a theoretical study of acetohydroxamic acid and its protonation processes using ab initio methodology at the MP2(FC)/cc-pdVZ level. We find the amide form more stable than the imidic tautomer by less than 1.0 kcal mol(-)(1). For comparison with the experimental data, a three-dimensional conformational study is performed on the most stable tautomer (amide). From this study, the different barriers to rotation and inversion are determined and the intramolecular hydrogen bond between the OH group and the carbonyl oxygen is characterized. The electrostatic potential distribution shows three possible sites for electrophilic attack, but it is shown that only two of them, the carbonyl oxygen and the nitrogen atoms, are actual protonation sites. The protonation energy (proton affinity) is obtained from the results of the neutral and charged species. Proton affinities for the species charged on the carbonyl oxygen and the nitrogen atoms are estimated to be 203.4 and 194.5 kcal mol(-)(1), respectively. The development of a statistical model permits the quantification of DeltaG (gas-phase basicity) for the two protonation processes. In this way, the carbonyl oxygen protonated form is found to be more stable than that of the nitrogen atoms by 8.3 kcal mol(-)(1) at 1 atm and 298.15 K, due to the enthalpic contribution. As temperature increases, the proportion of the nitrogen protonated form increases slightly.

Journal Article↗

PubMed2005

Conductivities and transport properties of gelled electrolytes with and without an ionic liquid for Li and Li-ion batteries.

Conductivity and transport properties have been determined for gelled polymer electrolytes of three compositions: a base PVdF-polymer gel with organic carbonate solvents as plasticizers and LiN(SO(2)C(2)F(5))(2) electrolyte, a second polymer electrolyte with 5 mass % 1-ethyl-3-methylimidazolium bisperfluoroethylsulfonyl imide (EMI-BETI) added to the base polymer electrolyte, and a third PVdF polymer electrolyte using only EMI-BETI as the plasticizer. Conductivities were studied over the temperature range +25 to -40 degrees C, and for all three gels, the temperature dependence of the conductivities was found to follow the VTF equation, which is consistent with the free volume model for ion transport. For the gel containing 5 mass % EMI-BETI, transport numbers were determined from +50 to -20 degrees C and were found to decrease as the temperature decreased. Although there are no theoretical models to treat and interpret the temperature dependence of transport numbers, we found that a modified VTF equation resulted in an excellent fit to the temperature dependence of the transport number, which is another confirmation of a free volume model for transport in these gelled polymer electrolytes.

Electric Conductivity↗

PubMed2005

Physicochemical properties and structures of room temperature ionic liquids. 2. Variation of alkyl chain length in imidazolium cation.

The alkyl chain length of 1-alkyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide ([Rmim][(CF(3)SO(2))(2)N], R = methyl (m), ethyl (e), butyl (b), hexyl (C(6)), and octyl (C(8))) was varied to prepare a series of room-temperature ionic liquids (RTILs), and the thermal behavior, density, viscosity, self-diffusion coefficients of the cation and anion, and ionic conductivity were measured over a wide temperature range. The self-diffusion coefficient, viscosity, ionic conductivity, and molar conductivity change with temperature following the Vogel-Fulcher-Tamman equation, and the density shows a linear decrease. The pulsed-field-gradient spin-echo NMR method reveals a higher self-diffusion coefficient for the cation compared to that for the anion over a wide temperature range, even if the cationic radius is larger than that of the anion. The summation of the cationic and anionic diffusion coefficients for the RTILs follows the order [emim][(CF(3)SO(2))(2)N] > [mmim][(CF(3)SO(2))(2)N] > [bmim][(CF(3)SO(2))(2)N] > [C(6)mim][(CF(3)SO(2))(2)N] > [C(8)mim][(CF(3)SO(2))(2)N], which greatly contrasts to the viscosity data. The ratio of molar conductivity obtained from impedance measurements to that calculated by the ionic diffusivity using the Nernst-Einstein equation quantifies the active ions contributing to ionic conduction in the diffusion components, in other words, ionicity of the ionic liquids. The ratio decreases with increasing number of carbon atoms in the alkyl chain. Finally, a balance between the electrostatic and induction forces has been discussed in terms of the main contribution factor in determining the physicochemical properties.

Journal Article↗

PubMed2005

Fluorescence studies in a pyrrolidinium ionic liquid: polarity of the medium and solvation dynamics.

While the imidazolium ionic liquids have been studied for some time, little is known about the pyrrolidinium ionic liquids. In this work, steady-state and picosecond time-resolved fluorescence behavior of three electron donor-acceptor molecules, coumarin-153 (C153), 4-aminophthalimide (AP), and 6-propionyl-2-dimethylaminonaphthalene (PRODAN), has been studied in a pyrrolidinium ionic liquid, N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide, abbreviated here as [bmpy][Tf2N]. The steady-state fluorescence data of the systems suggest that the microenvironment around these probe molecules, which is measured in terms of the solvent polarity parameter, E(T)(30), is similar to that in 1-decanol and that the polarity of this ionic liquid is comparable to that of the imidazolium ionic liquids. All three systems exhibit wavelength-dependent fluorescence decay behavior, and the time-resolved fluorescence spectra show a progressive shift of the fluorescence maximum toward the longer wavelength with time. This behavior is attributed to solvent-mediated relaxation of the fluorescent state of these systems. The dynamics of solvation, which is studied from the time-dependent shift of the fluorescence spectra, suggests that approximately 45% of the relaxation is too rapid to be measured in the present setup having a time resolution of 25 ps. The remaining observable components of the dynamics consist of a short component of 115-440 ps (with smaller amplitude) and a long component of 610-1395 ps (with higher amplitude). The average solvation time is consistent with the viscosity of this ionic liquid. The dynamics of solvation is dependent on the probe molecule, and nearly 2-fold variation of the solvation time depending on the probe molecule could be observed. No correlation of the solvation time with the probe molecule could, however, be observed.

Journal Article↗

PubMed2006

Physicochemical properties and structures of room-temperature ionic liquids. 3. Variation of cationic structures.

A series of room-temperature ionic liquids (RTILs) were prepared with different cationic structures, 1-butyl-3-methylimidazolium ([bmim]), 1-butylpyridinium ([bpy]), N-butyl-N-methylpyrrolidinium, ([bmpro]), and N-butyl-N,N,N-trimethylammonium ([(n-C(4)H(9))(CH(3))(3)N]) combined with an anion, bis(trifluoromethane sulfonyl)imide ([(CF(3)SO(2))(2)N]), and the thermal property, density, self-diffusion coefficients of the cation and anion, viscosity, and ionic conductivity were measured over a wide temperature range. The self-diffusion coefficient, viscosity, ionic conductivity, and molar conductivity follow the Vogel-Fulcher-Tamman equation for temperature dependencies, and the best-fit parameters have been estimated, together with the linear fitting parameters for the density. The relative cationic and anionic self-diffusion coefficients for the RTILs, independently determined by the pulsed-field-gradient spin-echo NMR method, appear to be influenced by the shape of the cationic structure. A definite order of the summation of the cationic and anionic diffusion coefficients for the RTILs: [bmim][(CF(3)SO(2))(2)N] > [bpy][(CF(3)SO(2))(2)N] > [bmpro][(CF(3)SO(2))(2)N] > [(n-C(4)H(9))(CH(3))(3)N][(CF(3)SO(2))(2)N], has been observed, which coincides with the reverse order to the viscosity data. The ratio of molar conductivity obtained from the impedance measurements to that calculated by the ionic diffusivity using the Nernst-Einstein equation quantifies the active ions contributing to ionic conduction in the diffusion components and follows the order: [bmpro][(CF(3)SO(2))(2)N] > [(n-C(4)H(9))(CH(3))(3)N][(CF(3)SO(2))(2)N] > [bpy][(CF(3)SO(2))(2)N] > [bmim][(CF(3)SO(2))(2)N] at 30 degrees C.

Journal Article↗

PubMed2005

NMR investigation of ionic liquid-LiX mixtures: pyrrolidinium cations and TFSI- anions.

In this paper is reported an extensive NMR characterization of N-methyl-N-propyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR13TFSI) room-temperature ionic liquid and its mixtures with LiTFSI. NMR was used to investigate the interactions between the ionic liquid and lithium salt and the diffusion coefficients of all ionic species present in these mixtures. The results are compared with previous DSC, Raman, and electrochemical investigations.

Journal Article↗