Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Dextrans”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59Linked to original sources

Dextran causes aggregation of mitochondria and influences their oxidoreductase activities and light scattering.

It has been reported that dextrans diminish the intermembrane space of mitochondria, increase the number of contact sites between the inner and the outer mitochondrial membranes, decrease the outer membrane permeability to adenosine 5(')-diphosphate, and change the kinetic properties of mitochondrial kinases. In the present work the influence of dextran M40 (5% w/v) on the oxidoreductase activities of the inner and outer membranes of mitochondria, the interaction of cytochrome c with mitochondrial membranes, and the light scattering by rat liver mitochondria were studied. No influence of dextran on the release of cytochrome c from mitochondria or its interaction with mitochondrial membranes was observed. Decreases in the NADH-oxidase (to 80+/-2% of the control), NADH-cytochrome c reductase (to 26+/-2%), succinate-cytochrome c reductase (to 70+/-5%), and NADH-ferricyanide reductase (to 75+/-3%) activities induced by dextran, which may be due to the mitochondrial aggregation, were observed. The formation of aggregates was registered by light scattering, confirmed by light microscopy, and explained within the framework of the Gouy-Chapman theory of the electrical double layer. The observed mitochondrial aggregation seems to be useful also for understanding the mechanisms of mitochondrial condensation and perinuclear clustering during apoptosis.

Animals↗

Preparation and characterization of a dextran-amylase conjugate.

Bacillus amyloliquefaciens alpha-amylase was attached to dextran after activation of the polysaccharide by using a modification of the cyanogen bromide method. The soluble dextran-amylase conjugate was purified by molecular-sieve chromatography. The conjugated enzyme has greater stability than the unmodified enzyme at low pH values, during heat treatment, and on removal of calcium ions with a chelating agent. Attachment of dextran to alpha-amylase did not alter the Michaelis constant of the enzyme acting on starch. The polysaccharide-enzyme conjugate probably consists of a cross-linked aggregate of many dextran and many enzyme molecules, in which a proportion of the enzyme molecules, although not inactivated, are unable to express their activity, except after dextranase treatment.

Amylases↗

Dextran molecular size and degree of branching as a function of sucrose concentration, pH, and temperature of reaction of Leuconostoc mesenteroides B-512FMCM dextransucrase.

Reactions of Leuconostoc mesenteroides B-512FMCM dextransucrase with increasing concentrations of sucrose, from 0.1 to 4.0 M, gave a decreasing amount of high-molecular weight dextran (HMWD) (>10(6) Da) with a concomitant increase in low-molecular weight dextran (LMWD) (<10(5) Da). At 0.1 M sucrose, pH 5.5, and 28 degrees C, 99.8% of the dextran had a MW>10(6) Da and at 4.0 M sucrose, 69.9% had a MW<10(5) Da and 30.1% had a MW>10(6) Da, giving a bimodal distribution. The degree of branching increased from 5% for 0.1 M sucrose to 16.6% for 4.0 M sucrose. The temperature had very little effect on the size of the dextran, which was >10(6) Da, but it had a significant effect on the degree of branching, which was 4.8% at 4 degrees C and increased to 14.7% at 45 degrees C. Both the molecular weight (MW) and the degree of branching were not significantly affected by different pH values between 4.5 and 6.0.

Dextrans↗

Dextran-coated silica packings for high-performance size-exclusion chromatography of proteins.

Porous silica beads have excellent mechanical properties for the high-performance liquid chromatography of proteins. However, the importance of non-specific interactions between silanols on the silica surface and the proteins requires a modification of these supports before they can be used as stationary phases for size-exclusion chromatography (SEC). Silica beads were coated with dextran bearing a small number of positive charges in order to neutralize the negatively charged silanol groups. Diethylaminoethyl-dextrans (DEAE-dextrans) with a relatively low percentage of dextran units bearing DEAE functions were layered on the silica beads. The influence of several characteristics of these packings on chromatographic performance were studied in order to determine the optimal conditions for the SEC of proteins.

Chromatography, DEAE-Cellulose↗

Post-ischemic cardiac chamber stiffness and coronary vasomotion: the role of edema and effects of dextran.

Contributions of edema to left ventricular (LV) chamber stiffness and coronary resistance after ischemia were studied in isolated buffer-perfused rabbit hearts, with constant LV chamber volume, subjected to 30 min global ischemia and 60 min reperfusion. During reperfusion hearts were perfused with standard buffer or with 3% dextran to increase oncotic pressure and decrease water content. LV chamber volume was adjusted to an initial diastolic pressure (LVEDP) of 10 mmHg. In nonischemic hearts (n = 6) LVEDP was 11 +/- 0.3 mmHg and water content was 5.0 +/- 0.1 ml/g dry weight after 90 min of perfusion. In untreated ischemic hearts (n = 8) LVEDP was 51 +/- 4 mmHg and water content was 6.0 +/- 0.1 ml/g dry weight after 60 min reperfusion (P less than 0.001 v. nonischemic). In dextran-treated ischemic hearts (n = 8) LVEDP was 38 +/- 3 mmHg (P less than 0.05 v. untreated ischemic) and water content was 5.2 +/- 0.1 ml/g dry weight (P less than 0.001 v. untreated ischemic). Coronary resistance in untreated ischemic hearts increased by 26% from 2.0 +/- 0.06 to 2.6 +/- 0.06 mmHg/ml/min after 60 min reperfusion. In treated hearts coronary resistance increased by 16% from 1.9 +/- 0.09 to 2.2 +/- 0.09 mm/Hg/ml/min (P less than 0.01 v. untreated ischemic). To determine whether the decrease in coronary resistance with dextran could be ascribed to active vasodilation, dilator responses to 2 min hypoxia or 10(-4)M adenosine were tested in nonischemic and reperfused ischemic hearts. Dilator responses were stable in nonischemic hearts or hearts reperfused after 15 min ischemia but after 30 min ischemia the dilator response to hypoxia was reduced by 72% (P less than 0.025) and the dilator response to adenosine was eliminated (P less than 0.02). Thus the response to dextran was unlike that of a direct vasodilator. These data suggest that myocardial edema plays a significant role in maintaining increased ventricular chamber stiffness and coronary resistance during reperfusion after ischemia.

Adenosine↗

Effect of dextran on protein stability and conformation attributed to macromolecular crowding.

Thermally induced transition curves of hen egg-white lysozyme were measured in the presence of several concentrations of dextran at pH 2.0 by near-UV and far-UV CD. The transition curves were fitted to a two-state model by a non-linear, least-squares method to obtain the transition temperature (T(m)), enthalpy change (deltaH(u)(T(m))), and free energy change (deltaG(u)(T)) of the unfolding transition. An increase in T(m) and almost constant deltaH(u)(T(m)) values were observed in the presence of added dextran at concentrations exceeding ca 100 g l(-1). In addition, dextran-induced conformational changes of fully unfolded protein were investigated by CD spectroscopy. Addition of high concentrations of dextran to solutions of acid-unfolded cytochrome c at pH 2.0 results in a shift of the CD spectrum from that characteristic of the fully unfolded polypeptide to that characteristic of the more compact, salt-induced molten globule state, a result suggesting that the molten globule-like state is stabilized relative to the fully unfolded form in crowded environments. Both observations are in qualitative accord with predictions of a previously proposed model for the effect of intermolecular excluded volume (macromolecular crowding) on protein stability and conformation.

Animals↗

Comparison of university of wisconsin, euro-collins, low-potassium dextran, and krebs-henseleit solutions for hypothermic lung preservation.

OBJECTIVE: We sought to test the effectiveness of 4 different solutions for hypothermic rat lung preservation. METHODS: One hundred ninety-two rats were used. The rats were divided into 4 groups, and University of Wisconsin, Euro-Collins, low-potassium dextran, or Krebs-Henseleit solution was used in each group. They were further divided into 6 subgroups of 8 rats each. The lungs were preserved at 4 degrees C for 0, 4, 6, 8, 12, or 24 hours, respectively, and lung function was studied by using a living rat perfusion model. RESULTS: Pulmonary arterial flow decreased in each group after 4 to 6 hours of preservation; the low-potassium dextran group decreased the least and the Krebs-Henseleit group decreased the most. Pulmonary vascular resistance increased in each group after 6 hours of preservation; the Krebs-Henseleit group increased the most. Although airway pressure increased, static lung compliance and gas exchange capacity decreased after 8 hours of preservation; the Krebs-Henseleit group exhibited the worst values. Lung tissue wet/dry weight ratio increased gradually during preservation; the University of Wisconsin group exhibited the least increase. An ultrastructural study indicated the least morphologic changes in the low-potassium dextran group at 24 hours. CONCLUSIONS: At 4 degrees C, all solutions preserved rat lungs for 4 hours with acceptable function. However, 6 hours of preservation resulted in damaged pulmonary function in some lungs, and this damage increased when preservation time was extended. The lungs preserved in low-potassium dextran solution had the best overall function, but the lungs preserved in University of Wisconsin solution had less edema.

Adenosine↗

The effect of dextran to restore the activity of pulmonary surfactant inhibited by albumin.

Pulmonary surfactant is crucial to maintain the proper functioning of the respiration system. Certain types of blood proteins (e.g. albumin) were found to inhibit the activity of pulmonary surfactant. Axisymmetric Drop Shape Analysis (ADSA) was used to study the effect of dextran to restore the activity of an albumin-inhibited pulmonary surfactant. It was found that dextran could effectively restore surface tension properties of the inhibited surfactant in vitro. Furthermore, dextran improved the performance of pulmonary surfactants when albumin was absent. It was found that when a surfactant film was under high compression (e.g. above 70% surface area reduction), the presence of dextran increased film stability, so that the film could sustain high surface pressures without being collapsing.

Albumins↗

Assessment of the cytotoxicity of photocrosslinked dextran and hyaluronan-based hydrogels to vascular smooth muscle cells.

The cytotoxicity of polysaccharide-based hydrogels and solutions was studied in vitro after 48h of indirect exposure of the materials with vascular smooth muscle cells. Dextran and/or hyaluronan were derivatized using glycidyl methacrylate, and hydrogels were formed in the presence of photoinitiators and ultraviolet radiation in multiwell inserts to avoid direct contact with cell monolayers. Observation of cell morphology indicated that dextran hydrogels, a blend of non-derivatized hyaluronan into dextran hydrogel. and a hyaluronan solution were highly cytocompatible. However, hydrogels made of derivatized hyaluronan were cytotoxic when compared to unexposed sham controls that contained multiwell inserts but no hydrogels. Results from quantitative assays for proliferation and viability corroborated the qualitative observations, and scrape wound assays revealed a significant increase in smooth muscles cell migration/proliferation after indirect exposure to several of the polysaccharide-based materials. Results from this study demonstrate that hydrogels made of dextran and hyaluronan solution show good cytocompatibility in vitro. making these degradable matrices interesting candidates for drug delivery purposes.

Animals↗

Enzymatic synthesis of dextran-containing hydrogels.

Dextran, a natural glucose-containing polysaccharide, has been acylated by Proleather FG-F and lipase AY, a protease and lipase from Bacillus sp. and Candida rugosa, respectively, in anhydrous dimethylsulfoxide in the presence of vinyl acrylate (VA). The efficiency of the reaction in the presence of Proleather FG-F and the isolated yields were ca. 71% and 45%, respectively. Dextran derivatized with VA (dexT70-VA) was characterized by gel permeation chromatography and its structure was established by NMR indicating two positional isomers at the 2 and 3 positions on the glucose moieties in equal amounts. Furthermore, the dextran glucopyranose residues were mono-substituted. The benefits of the biocatalytic synthesis of dextran acrylates was demonstrated using 4-dimethylaminopyridine as a chemical catalyst. Gels were prepared by free radical polymerization of aqueous solutions of dexT70-VA with different degrees of substitution and monomer concentrations. Intermolecular linkages and physical entanglements are predominantly formed by concentrated solutions, however, a part of the acrylate groups did not react. Gel pore sizes were calculated from swelling experiments and ranged from ca. 18 to 182 A.

4-Aminopyridine↗

Selective plasminogen binding: cysteinyl-lysine-dextran protein interactions.

The dipeptide, L-cysteine-L-lysine, when coupled to a dextran matrix demonstrates a much higher binding of Glu-plasminogen than dextran alone. Plasminogen binds to the dipeptide coupled matrix with a high affinity and binding capacity and is retained by the surface for long periods. In comparison, other proteins such as bovine serum albumin, alpha2-antiplasmin, tPA, fibrinogen, and plasmin are not retained by the material demonstrating that the L-cysteine-L-lysine-dextran is highly selective for Glu-plasminogen. While fibrinogen alone does not bind to the surface, fibrinogen on surfaces to which plasminogen has been pre-adsorbed does demonstrate adsorption interactions. The nature of the interactions depend on the amount of plasminogen bound. Fibrinogen in contact with high concentrations of adsorbed plasminogen causes an increase in the desorption rate of the surface bound protein; if low amounts of plasminogen are initially bound, fibrinogen exposure causes an increase in total protein adsorbed by the surface. A higher amount of protein adsorbs from a mixed plasma solution. This does not appear to inhibit the binding of plasminogen, but rather may actually facilitate more plasminogen binding than is the case of plasminogen alone. The dipeptide coupled to the dextran matrix appears to be a preferred substrate for plasminogen binding compared to free lysine and epsilon-amino caproic acid.

Animals↗

Fluid shift across the placenta: I. The effect of dextran T 40 in the isolated guinea-pig placenta.

In an effort to understand better the transplacental water flux induced by osmotic forces, 17 near-term guinea-pig placentae were perfused on both sides with an artificial cell-free fluid containing dextran. Maternal and fetal arterial inflow rates were kept constant by syringe pumps and inflow and outflow pressures were recorded continuously. Precise measurements of outflow rates were made by weight determination and transplacental fluid shifts calculated by weight changes during placental passage. The content of dextran T 40 in the perfusion fluid was altered in stepwise manner from 0 to 60 to 120 g/l, and the effects of all possible combinations of fetal--maternal concentration differences on the transplacental fluid shift were observed. On the average, about 1 X 10(-3) ml/min/g placenta was moved per 1 g/l concentration difference. In two experiments venous colloid osmotic pressures were recorded continuously. In ten experiments the oncotic fluid shift was counterbalanced by an additional hydrostatic pressure difference; an average 1 mmHg hydrostatic pressure counterbalancing 15 g/l of dextran concentration osmotic force. The calculated hydraulic conductance, Lp, was approximately 0.017 ml/min/mmHg/g and the reflection coefficient, s, for dextran T 40 was 0.1. Both parameters characterize the isolated guinea-pig placenta as leaky.

Animals↗

A novel aldehyde dextran sulfonate matrix for affinity biosensors.

Aldehyde dextran sulfonate (ADS), a modified oligosaccharide polymer, was used to prepare a new matrix structure for affinity biosensors. The principal difference between the ADS matrix and similar structures developed previously results from presence of two active functional groups in the matrix, namely, aldehyde and sulfonate. These groups perform two different functions in the matrix. The aldehyde group is responsible for covalent bonding in the biomaterials, and the negatively charged sulfonate group provides electrostatic attraction of the positively charged biomolecules. By varying the ratio between the aldehyde and sulfonate groups in the matrix, one can control contributions from the two binding modes (covalent and electrostatic). A number of oligosaccharides, such as simple dextran, aldehyde dextran (AD), aldehyde dextran sulfonate (ADS) and aldehyde ethylcellulose (AEC), were used for preparation of matrix structures. The properties of the obtained matrices were analysed and compared. Surface plasmon resonance (SPR) was used as the main technique to characterize the matrix structures.

Aldehydes↗

Physically crosslinked dextran hydrogels by stereocomplex formation of lactic acid oligomers: degradation and protein release behavior.

Hydrogels, physically crosslinked through stereocomplex formation, were obtained by mixing aqueous solutions of dextran with L-lactic acid grafts and dextran with D-lactic acid grafts. Protein-loaded hydrogels were simply prepared by dissolving the protein in these dextran solutions prior to mixing. It was shown that under physiological conditions the gels are fully degradable. When the gels were exposed to an aqueous buffer solution, they first showed a swelling phase in which their weight increased 2-3 times due to absorption of water, followed by a dissolution phase. The degradation time depended on the composition of the hydrogel, i.e., the number of lactate grafts, the length and polydispersity of the grafts and the initial water content, and varied from 1 to 7 days. Most likely, the degradation of the stereocomplex hydrogel started with hydrolysis of the carbonate ester, which links the lactate graft to dextran. The gels showed a release of the entrapped model proteins (IgG and lysozyme) over 6 days and the kinetics depended on the gel characteristics, such as the polydispersity of the lactate grafts and the initial water content. Lysozyme was mainly released by Fickian diffusion, indicating that its hydrodynamic diameter is smaller than the hydrogel mesh size. On the other hand the release of IgG was governed by diffusion as well as swelling/degradation of the hydrogel. Importantly, the proteins were quantitatively released from the gels and with full preservation of the enzymatic activity of lysozyme, emphasizing the protein-friendly preparation method of the protein-loaded stereocomplex hydrogel.

Algorithms↗

Controlled release of a model protein from enzymatically degrading dextran microspheres.

Protein-loaded dextran microspheres were prepared by a water-in-water emulsion technique. With this technique, an aqueous solution of methacrylated dextran (dex-MA) is emulsified in an aqueous solution of poly(ethylene glycol) (PEG). Subsequently, the dispersed dex-MA phase is crosslinked by radical polymerization of the dextran-bound methacryloyl groups. This method renders microspheres with a hydrogel character of which the crosslink density can be controlled by the water content and the degree of substitution of the dex-MA (DS, the number of methacrylates per 100 glucopyranose residues). If an IgG solution was added to the dex-MA/PEG aqueous system prior to the polymerization reaction, the protein could be encapsulated in the dextran microspheres with a high yield (88-98%). The release of IgG was studied as a function of the water content, the DS and the degradation rate of the microspheres. The microspheres were rendered degradable by co-encapsulation of an endo-dextranase. Non-degrading microspheres mainly showed a burst release, which decreased with increasing crosslink density. By either a low water content (50%, w/w, or lower) or a high DS (DS 13), it was possible to reduce the burst release to about 10%, meaning that almost complete entrapment of the protein could be achieved. The release of IgG from degrading microspheres was predominantly dependent on the DS and the amount of encapsulated dextranase. No differences in release of IgG from microspheres with and without dextranase were observed at high DS (DS 13). This was ascribed to the inability of the enzyme to degrade these microspheres. On the other hand, the entrapped protein was completely released from enzymatically degrading microspheres with a DS 4. Moreover, the release rate of IgG was proportional to the degradation rate of these microspheres (depending on the amount of co-encapsulated dextranase). Interestingly, an almost zero-order release was observed from these microspheres for periods up to 30 days.

Delayed-Action Preparations↗

The safety of intravenous iron dextran in hemodialysis patients.

The treatment of anemia in hemodialysis patients is frequently hindered by the presence of suboptimal iron stores. Intravenous iron dextran is in common use to maintain iron stores in this population, but there are little published data regarding the incidence and type of adverse events. The purpose of this study was to evaluate the safety of this medication. Charts from four hemodialysis centers of all 573 patients treated with intravenous iron dextran (INFeD; Schein Pharmaceutical, Inc, Florham Park, NJ) between July 1, 1993, and June 30, 1995, were studied. Twenty-seven patients (4.7%) had adverse reactions that were related to iron dextran. Four patients (0.7%) had reactions classified as serious (one cardiac arrest; three others required hospitalization). Ten patients (1.7%) had reactions classified as anaphylactoid. No patients died or developed permanent disability as a result of reactions. The most common adverse reactions included itching (1.5% of patients) and dyspnea or wheezing (1.5%); others included chest pain (1.0%), nausea (0.5%), hypotension (0.5%), swelling (0.5%), dyspepsia (0.5%), diarrhea (0.5%), skin flushing (0.3%), headache (0.3%), cardiac arrest (0.2%), and myalgias (0.2%). Five of all the reactions occurred during a test dose; four of these were anaphylactoid. Several factors were studied as possible predictors of adverse reactions. A positive history of drug allergy (odds ratio, 2.4; P = 0.03) and history of multiple drug allergy (odds ratio, 5.5; P = 0.0004) were significant predictors of reactions. In summary, we found serious adverse reactions to be uncommon in hemodialysis patients treated with intravenous iron dextran. Future prospective studies will help confirm this finding.

Anaphylaxis↗

The gel-forming behaviour of dextran in the presence of KCl: a quantitative 13C and pulsed field gradient (PFG) NMR study.

Although the gel forming ability of certain polysaccharides in the presence of ions is a well-known phenomenon, detailed physicochemical mechanisms of such processes are still unknown. In this investigation high resolution 13C NMR as well as 1H pulsed field gradient (PFG) NMR were used to investigate the mobility of dextran in the sol and in the gel state. Gel-formation of dextran can be easily induced by the addition of large amounts of potassium chloride. No major differences in the T(1) relaxation times of dextran in the sol and in the gel state could be observed. Accordingly, the analysis of the 13C NMR spectroscopic data did not provide any indication of an observable line-broadening upon gel-formation. However, a KCl concentration dependent decrease of signal intensity in comparison to an internal standard was detected. On the other hand, the PFG NMR studies clearly indicated a gradual diminution of the self-diffusion coefficient of the dextran with increasing molecular weight as well as in the presence of potassium chloride. These measurements revealed in agreement with spectroscopic data that at least one potassium ion per monomer subunit (i.e. one glycopyranose residue) is necessary for gel formation.

Carbon Isotopes↗

New antibody purification procedure using a thermally responsive poly(N-isopropylacrylamide)-dextran derivative conjugate.

Through their specificity and affinity, antibodies are useful tools in research and medicine. In this study, we investigated a new type of chromatographic method using a thermosensitive polymer for the purification of antibodies against a dextran derivative (DD), as a model. The thermally reversible soluble-insoluble poly(N-isopropylacrylamide)-dextran derivative conjugate, named poly(NIPAAm)-DD, has been synthesized by conjugating amino-terminated poly(N-isopropylacrylamide) to a DD via ethyl-3-(3-dimethylaminopropyl)-carbodiimide. On one hand, this report describes the two steps of poly(NIPAAm)-DD conjugation and characterization. On the other hand, the poly(NIPAAm)-DD conjugate was used as a tool to purify polyclonal antibodies in serum samples from rabbits subcutaneously immunized with the derivatized dextran. Antibodies were purified and quantified by immunoenzymatic assays. Our results indicate that antibodies recognized both DD and poly(NIPAAm)-DD. In contrast, they did not bind to native poly(NIPAAm) or poly(NIPAAm) conjugated with another anionic dextran. We conclude that the conjugation of a polysaccharide to poly(NIPAAm) leads to an original and efficient chromatographic method to purify antibodies. Moreover, this novel method of purification is rapid, sensitive, inexpensive and could be used to purify various types of antibodies.

Acrylamides↗