Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ZIRCONIUM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources
PubMed2005

A highly regio- and stereoselective nickel-catalyzed ring-opening reaction of alkyl- and allylzirconium reagents to 7-oxabenzonorbornadienes.

[Reaction: see text]. An efficient method for the synthesis of cis-2-alkyl- or allyl-1,2-dihydronaphthalenes via a nickel-catalyzed highly regio- and stereoselective ring-opening addition of alkyl- or allylzirconium reagents to 7-oxabenzonorbornadienes is described. Treatment of 7-oxabenzonorbornadienes 1a-c with various alkylzirconium reagents 2a-j (Cp2ZrClCH2CH2R: R = tert-butyl, n-butyl, n-pentyl, -(CH2)3CH=C(CH3)2, -SiMe3, -CH2SiMe3, -(CH2)3Br, cyclopentyl, cyclohexyl, and benzyl) in the presence of NiBr2(dppe) and Zn powder in dry THF at 50 degrees C afforded the corresponding cis-2-alkyl-1,2-dihydronaphthalene derivatives 3a-m in good yields. In addition, allyl zirconium reagents 4a-c also underwent ring-opening reactions with 1a and 1c to give 5a-d in very good yields. The alkylative ring-opening products from 7-oxabenzonorbornadiene can be further converted to naphthalene derivatives 6a-c, via an acid-mediated dehydration, in good to excellent yields. A possible mechanism for the present catalytic reaction was proposed.

Journal Article↗
PubMed1996

Convergent Synthetic Routes to Orthogonally Fused Conjugated Oligomers Directed toward Molecular Scale Electronic Device Applications.

This paper describes the synthetic organic phase of a project directed toward the construction of molecular scale electronic devices. Outlined is a convergent synthetic route to orthogonally fused conjugated organic oligomers. The final systems are to have a potentially conducting chain fused perpendicularly to a second potentially conducting chain via a sigma bonded network. One of the core segments synthesized is based on a spirobithiophene moiety with a central silicon atom. It is formed by a zirconium-promoted bis(bicyclization) of a tetrapropargylsilane. The second core is a 9,9'-spirobifluorene system. Terminal halide groups provide the linkage points for further extension of the chains via Pd-catalyzed or Pd/Cu-catalyzed cross coupling methods. All four branching arms are affixed to the core in a single operation, thus making the syntheses highly convergent. In the cases of the larger functionalized systems, alkyl substituents on the thiophenes afford soluble materials. In order to prepare the molecules with >50 Å lengths, an iterative divergent/convergent approach had to be utilized for the construction of oligo(thiophene-ethynylene) branching arms. Organopalladium-catalyzed procedures are used extensively for the syntheses of the orthogonally fused compounds.

Journal Article↗
PubMed2005

Models of (ZrO2)n complexes intercalated into montmorillonite.

The article discusses the properties of several model zirconium dioxide complexes (ZrO(2))(n)() intercalated into the interlayer space of montmorillonite clay. Grand canonical Monte Carlo simulation was used in a series of numerical experiments during analysis of the low-temperature nitrogen adsorption in the micropores thus generated. The goal of such experiments was to determine the geometrical parameters of introduced molecular complexes of different types inside micropores of various widths. The obtained information was used to characterize textural and structural properties of three pillared interlayer materials prepared by using pillaring species synthesized via aging of zirconyl chloride solutions containing as additives chlorides of Ca, Sr, or Ba. It was found that in the cases of Ba and Ca the interlayer micropores are filled with isolated tetramers (ZrO(2))(4). Meanwhile, the presence of Sr in the pillaring solution, most likely, favors the preservation of larger sheetlike complexes (ZrO(2))(8).

Journal Article↗
PubMed2005

Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques.

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.

Journal Article↗
PubMed2006

Structural characterization and oxidative dehydrogenation activity of V2O5/Ce(x)Zr(1-x)O2/SiO2 catalysts.

The thermal stability of a nanosized Ce(x)Zr(1-x)O2 solid solution on a silica surface and the dispersion behavior of V2O5 over Ce(x)Zr(1-x)O2/SiO2 have been investigated using XRD, Raman spectroscopy, XPS, HREM, and BET surface area techniques. Oxidative dehydrogenation of ethylbenzene to styrene was performed as a test reaction to assess the usefulness of the VOx/Ce(x)Zr(1-x)O2/SiO2 catalyst. Ce(x)Zr(1-x)O2/SiO2 (1:1:2 mol ratio based on oxides) was synthesized through a soft-chemical route from ultrahigh dilute solutions by adopting a deposition coprecipitation technique. A theoretical monolayer equivalent to 10 wt % V2O5 was impregnated over the calcined Ce(x)Zr(1-x)O2/SiO2 sample (773 K) by an aqueous wet impregnation technique. The prepared V2O5/Ce(x)Zr(1-x)O2/SiO2 sample was subjected to thermal treatments from 773 to 1073 K. The XRD measurements indicate the presence of cubic Ce0.75Zr0.25O2 in the case of Ce(x)Zr(1-x)O2/SiO2, while cubic Ce0.5Zr0.5O2 and tetragonal Ce0.16Zr0.84O2 in the case of V2O5/Ce(x)Zr(1-x)O2/SiO2 when calcined at various temperatures. Dispersed vanadium oxide induces more incorporation of zirconium into the ceria lattice, thereby decreasing its lattice size and also accelerating the crystallization of Ce-Zr-O solid solutions at higher calcination temperatures. Further, it interacts selectively with the ceria portion of the composite oxide to form CeVO4. The RS measurements provide good evidence about the dispersed form of vanadium oxide and the CeVO4 compound. The HREM studies show the presence of small Ce-Zr-oxide particles of approximately 5 nm size over the surface of amorphous silica and corroborate with the results obtained from other techniques. The catalytic activity studies reveal the ability of vanadium oxide supported on Ce(x)Zr(1-x)O2/SiO2 to efficiently catalyze the ODH of ethylbenzene at normal atmospheric pressure. The remarkable ability of Ce(x)Zr(1-x)O2 to prevent the deactivation of supported vanadium oxide leading to stable activity in the time-on-stream experiments and high selectivity to styrene are other important observations.

Journal Article↗
PubMed2006

Group 4 transition metal-benzene adducts: carbon ring deformation upon complexation.

Benzene is reacted with titanium, zirconium, and hafnium metal atoms, which are produced by laser-ablation. The M(C(6)H(6)), M(C(6)H(6))(2), and M(2)(C(6)H(6))(3) complexes are formed, isolated in solid argon, and identified by infrared spectroscopy using isotopic substitution of the benzene precursor. Density functional theory (DFT) calculations are used to confirm molecular assignments. Based on computed energies and the observed vibrational spectra and isotopic shifts, electronic ground states and geometries are predicted. Observed splitting of formerly degenerate modes provides the first experimental evidence for deformation of the planar carbon skeleton of benzene upon complexation with early transition metal atoms.

Journal Article↗
PubMed2006

Group 4 transition-metal atom reactions with CS2 and OCS: infrared spectra and density functional calculations of SMCS, SM-(eta2-CS), SMCO, and OMCS in solid argon.

Laser-ablated titanium, zirconium, and hafnium atoms were reacted with CS2 and OCS molecules during condensation in excess argon. With CS2, the SMCS and S-M(eta2-CS) products were formed on sample deposition. Photolysis increased both complexes, while annealing favored the lower energy S-M(eta2-CS) side-bound isomer. The OCS reactions produced SMCO, OMCS, and the simple M(eta2-CO)S adduct. Product absorptions are identified by comparison with density functional theory frequency calculations and isotopic substitutions. Investigations with OCS emphasized differences in the CS and CO bond insertion products.

Journal Article↗
PubMed2004

Self-assembled monolayers of alpha,omega-diphosphonic acids on Ti enable complete or spatially controlled surface derivatization.

Alpha,omega-diphosphonic acids self-assemble on the native oxide surfaces of Ti or Ti-6Al-4V. Heating gives strongly bonded phosphonate monolayers. Infrared and X-ray spectroscopic and water contact angle data show that the films are bonded to the surface by one phosphonate unit; the other remains a phosphonic acid. Surface loadings were measured by quartz crystal microbalance procedures. Mechanical shear strengths for the films were also measured; these do not correlate simply with surface loadings. Films formed from 1,12-diphosphonododecane were treated with zirconium tetra(tert-butoxide) to give surface Zr complex species; derivatives of these surface complexes are stable to hydrolysis under physiological conditions and are mechanically strong. The complexation reaction can be accomplished over the entire surface; alternatively, dropwise application of the alkoxide to the surface enables spatial control of deposition. The cell attractive peptide derivative RGDC can be bound to these surface Zr alkoxide complexes through (maleimido)-alkylcarboxylate intermediates. Surfaces modified with RGDC were shown to be effective for osteoblast binding and proliferation.

Cell Adhesion↗
PubMed2004

Modification of the surface properties of porous nanometric zirconia particles by covalent grafting.

We here report on the covalent grafting of various phosphated species (phosphoric acid, phenylphosphonic acid, and octyl phosphate) onto the surface of monoclinic zirconia nanoparticles obtained by hydrothermal treatment of zirconium acetate. The initial particles are 60 nm aggregates of nanometric primary grains and present an inner porosity. Small-angle X-ray scattering shows that the high specific area of the colloidal particles (450 m2 x g(-1)) decreases to 150 m2 x g(-1) upon drying. Therefore, phosphated reactants can access the whole internal surface of the aggregates only before drying. The surface of the particles can be covered with functional groups bound through a variable number of Zr-O-P bonds. Several factors probably enhance the reaction between the particles and the phosphates or phosphonates: the large specific area of the particles, a fully accessible porous network, and a large concentration of surface terminal groups. At the same time, the morphology of the particles is well preserved upon grafting. This is due to the good crystallinity of the primary grains that constitute the particles. In addition, the grafting drastically modifies the surface properties of the colloids. For example, the polarizability of the particles decreases in the sequence -POH > as-prepared ZrO2 > -PC6H5 > -POC8H17. Furthermore, the grafting of octyl phosphate allows exclusion of water from pores of 2 nm radius, up to hydrostatic pressures of 20 MPa.

Journal Article↗
PubMed2004

Permeable nonaggregating porphyrin thin films that display enhanced photophysical properties.

Porphyrins bearing bulky alkoxyphenyl substituents at two of the four meso-positions and phenyl phosphonates at the other two have been prepared and used as building blocks for layer-by-layer assembly of conductive-glass-supported thin films via zirconium phosphonate chemistry. Thin-film characterization shows that the addition of sterically demanding 2,6-di(n-hexoxy)phenyl substituents to the meso-positions of the porphyrin skeleton can successfully prevent molecular aggregation. Both absorption and emission studies of multilayer thin films provide strong evidence that the new compounds have the ability to form thin films in which very little molecular (chromophore) interaction is present, relative to porphyrins that are not sterically hindered. Furthermore, the films are found to be permeable to selected small redox probes but blocking toward larger ones. Taken together, the sharp absorption spectra, increased emission yields, and permeability are expected to be advantageous for various materials-based applications such as photovoltaics and sensors.

Electrochemistry↗
PubMed2006

Application of porous phosphate heterostructure materials for gas separation.

In this study, the adsorbents Cu+-3SiPPH723 and Cu2+-3SiPPH723 were prepared starting from a silica-expanded zirconium phosphate heterostructure, 3SiPPH(0.2), which was subjected to an ion exchange with Cu(I) and Cu(II). These materials were characterized using powder X-ray diffraction, X-ray photoelectron spectroscopy, ammonia thermally programmed desorption, hydrogen temperature-programmed reduction, and N2 adsorption (77 K). The equilibria and kinetics of adsorption of pure propylene (C3H6) and propane (C3H8) were studied using a conventional glass high-vacuum volumetric device, equipped with grease-free valves, in the temperature range of 273-393 K. The starting material, 3SiPPH(0.2), presented a high acidity and irreversible chemisorption of the olefin, which increases with temperature. Unlike the support, the irreversible adsorption of the olefin on the Cu+-3SiPPH723 and Cu2+-3SiPPH723 samples decreases with increasing temperature and disappears at 393 K, showing a very high selectivity toward propylene. The C3H8 adsorption in all the samples was always reversible. On the basis of the results of this study, both Cu+-3SiPPH723 and Cu2+-3SiPPH723 samples can be efficiently applied in the separation of a C3H6/C3H8 mixture at 393 K. Cu+-3SiPPH723 would have the highest efficiency, because its capacity for C3H6 adsorption was higher than that for the Cu2+-3SiPPH723 sample.

Journal Article↗
PubMed2006

Agarose template for the fabrication of macroporous metal oxide structures.

Agarose gels have been applied as templates for the formation of macroporous metal oxide structures. The preparation of the agarose template is extremely simple, and with variation of the agarose content, control over morphology is demonstrated: The average pore size decreases from 180 to 55 nm and the surface area increases from 238 to 271 m2 g(-1) with increasing agarose content in the gel. The gelling temperature was also found to influence the final template morphology. Conducting sol-gel chemistry within the template structure followed by removal of the template by heating to 450 degrees C gives porous inorganic oxides. The technique has been demonstrated for the oxides of titanium, zirconium, niobium, and tin. The final morphology of the metal oxide is homogeneous and results from a coating of the agarose structure. The pore diameter decreased and the specific surface area of the titanium dioxide materials increased from 28 to 66 m2 g(-1) as the agarose content in the template is increased from 0.5 to 5.0 wt%. The overall pore size and surface area are lower than the original gel due to shrinkage occurring with the sol-gel process, as well as crystallization and a loss of microporosity in the final material.

Journal Article↗
PubMed2006

Surface engineering of poly(dimethylsiloxane) microfluidic devices using transition metal sol-gel chemistry.

We report the coating of poly(dimethylsiloxane) (PDMS) microchannels using transition metal sol-gel chemistry and the subsequent characterization of the coatings. The channels were created using soft polymer lithography, and three metal alkoxide sol-gel precursors were investigated, titanium isopropoxide, zirconium isopropoxide, and vanadium triisobutoxide oxide. The metal alkoxides were diffused into the sidewalls of a PDMS channel and subsequently hydrolyzed using water vapor. This procedure resulted in the formation of durable metal oxide surfaces of titania, zirconia, or vanadia. The resulting surfaces were characterized using contact angle, X-ray photoelectron spectroscopy (XPS), Raman, transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), and electroosmotic mobility (EOM) measurements. All of the metal oxide-modified PDMS surfaces were significantly more hydrophilic than native PDMS. Contact angles for the coatings were 90 degrees for PDMS-ZrO2, 61 degrees for PDMS-TiO2, and 19 degrees for PDMS-vanadia. XPS showed the presence of titania, zirconia, and vanadia on the PDMS surface. XPS spectra also showed no chemical modification of the PDMS after the in situ deposition of the particles either in the Si-O, Si-C, or C-H bonds of the PDMS. The particles deposited in situ were imaged with TEM and were found to be homogeneously distributed throughout the bulk of the PDMS. EOM measurements of the inorganic coatings were stable over a period of at least 95 days. Both cathodic and anodic EOMs could be generated depending upon buffer pH used. The points of net zero charge for PDMS-TiO2, PDMS-ZrO2, and PDMS-vanadia channels were calculated using EOM versus pH measurements and were found to be 4.1 +/- 0.25, 6.1 +/- 0.2, and 7.0 +/- 0.43, respectively. In addition to modifying PDMS channels with inorganic coatings, these inorganic coatings were derivatized with various organic functionalities including oligoethylene oxide (OEO), amino, perfluoro, or mercapto groups using silane chemistry. Contact angle measurements for perfluoro, mercapto, amino, and OEO-coated surfaces yielded contact angles of 120 degrees , 76 degrees , 45 degrees , and 23 degrees , respectively. These contact angles did not change over the period of 95 days. OEO-coated channels reduced the EOM by 50% from native PDMS-TiO2 to 0.9 +/- 0.05 x 10(-4) cm2/V.s (n = 5, 5.5% RSD).

Journal Article↗
PubMed2006

Direct synthesis of zirconia aerogel nanoarchitecture in supercritical CO2.

The objective of the present study was to synthesize porous ZrO2 aerogels with a nanostructure via a direct sol-gel route in the green solvent supercritical carbon dioxide (scCO2). The synthesis involved the coordination and polycondensation of a zirconium alkoxide using acetic acid in CO2, followed by scCO2 drying and calcination. Either a translucent or opaque monolith was obtained, which was subsequently characterized by electron microscopy, X-ray diffraction, thermal analysis, N2 physisorption, and infrared spectroscopy analysis. The electron microscopy results showed that the translucent monolithic ZrO2 exhibited a well-defined mesoporous structure, while the opaque monolith, formed using added alcohol as a cosolvent, was composed of loosely compacted nanospherical particles with a diameter of ca. 20 nm. After calcination at 400 and 500 degrees C, X-ray diffraction results indicated that the ZrO2 exhibited tetragonal and/or monoclinic phases. In situ infrared spectroscopy results showed the formation of a Zr-acetate coordinate complex at the initial stage of the polycondensation, followed by further condensation of the complex into macromolecules.

Journal Article↗
PubMed1998

Ethene-Norbornene Copolymerization Using Homogenous Metallocene and Half-Sandwich Catalysts: Kinetics and Relationships between Catalyst Structure and Polymer Structure. 1. Kinetics of the Ethene-Norbornene Copolymerization Using the

The kinetics of the ethene-norbornene copolymerization using the [(isopropylidene)(eta5-inden-1-ylidene-eta5-cyclopentadienyl)]zirconium dichloride (iPr[IndCp]ZrCl2)/methylaluminoxane catalyst has been investigated at 70 degreesC in a concentrated solution of norbornene in toluene and an ethene pressure ranging from 4 to 60 bar (58-870 psi). The ethene reaction rate has been measured during the copolymerization process at varying reactant concentrations. The reaction orders and rate constants were determined and compared to the corresponding values of the ethene and norbornene homopolymerizations. It was found that kEhomo > kEco and kNhomo < kNco. The copolymerization parameters are r1 = 0.9 and r2 = 0.05.

Journal Article↗
PubMed2002

Catalytically active, recyclable zirconocene supported at cross-links within porous polymer disks.

[reaction: see text] Copolymerization of bis(4-vinylbenzylcyclopentadienyl)zirconium dichloride and styrene in a test tube, followed by extraction of the bulk polymer and slicing into "disks" 1 mm thick and 5 mm in diameter, gives a supported zirconocene species that exhibits both stoichiometric and catalytic chemical activity. The disks catalyze reaction of trimethylaluminum and phenylacetylene to give alpha-methylstyrene with modest turnover numbers and are active over at least six recyclings.

Journal Article↗
PubMed2002

Palladium-catalyzed reaction of acylzirconocene chloride and stereoselective formation of bicyclo[3.3.0] compounds.

The acylzirconocene chloride complex as an acyl group donor reacts with omega-unsaturated alpha,beta-enones and -ynones under Pd-Me(2)Zn(Me(2)AlCl)-catalyzed conditions to give stereoselectively bicyclo[3.3.0] compounds through (i) formation of a Pd(II) intermediate by an oxidative addition of the Pd(0) catalyst to an enone function, (ii) cyclization of the Pd intermediate to an omega-unsaturated group, (iii) an acyl group transfer from zirconium to Pd metal, (iv) reductive elimination of the Pd metal, and (v) intramolecular cis-selective aldol reaction. [reaction: see text]

Journal Article↗
PubMed2004

Triethylborane-induced radical allylation reaction with zirconocene-olefin complex.

[reaction: see text] Allylzirconium reagents are effective for radical allylation of alpha-halo carbonyl compounds. The key steps would be homolytic cleavage of the zirconium-carbon bond and halogen abstraction by the resulting Cp(2)ZrCl(III). Zirconocene-olefin complex can be also utilized for the allylation of alpha-halo compounds.

Journal Article↗