Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “TCP”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

Architecture of individual dendrites from intracellularly labeled thalamocortical projection neurons in the ventral posterolateral and ventral posteromedial nuclei of cat.

This study provides quantitative descriptions of individual dendrites from electrophysiologically characterized and intracellularly labeled thalamocortical projection (TCP) neurons of the cat ventrobasal complex. One hundred nine dendrites from six ventral posterolateral (VPL) neurons and six ventral posteromedial (VPM) neurons were examined. Measurement of several parameters showed that the individual dendrites were very similar to each other in overall architecture even though they varied greatly in total length and number of dendritic branches. The mean path distance (length from soma to a dendritic tip) was very similar for all dendrites in each group (VPL or VPM) regardless of the number of branches found along the path distance. However, VPL dendrites had a longer mean path distance (VPL = 206 +/- 36 microns; n = 51) than VPM dendrites (VPM = 182 +/- 29 microns; n = 58; P < 0.001). For all dendrites there was a strong correlation between the stem dendrite diameter and the dendritic length, which allows the estimation of dendritic length from dendrite diameter. Analysis of dendritic scaling shows that branches higher than first order do not follow Rall's 3/2 power rule, so these neurons cannot be modeled using the equivalent cylinder approximation. The data add to the qualitative descriptions of cat ventrobasal (VB) TCP dendrites currently available and provide a basis for future comparative, developmental, and plasticity studies. Analysis shows that many parameters of cat VB TCP dendrites fall within a narrow range, suggesting that, regardless of differences in length or superficial appearance, these dendrites share a stable underlying architecture.

Animals↗

Adult thymectomy prevention of the appearance of suppressor T cells which depress contact sensitivity to picryl chloride and reversal of adult thymectomy effect by thymus extract.

Suppressor cells, which depress the passive transfer of contact sensitivity appear in the lymph nodes and spleen of mice injected with picryl sulfonic acid (PSA). These cells produce a soluble suppressor T cell product (s-TCP), and immune lymph node cells incubated in s-TCP fail to transfer contact sensitivity. This paper shows that the appearance of suppressor T cells following the injection of PSA was prevented by adult thymectomy (ATx). ATx also limited the production of s-TCP. However, ATx had no effect on the DNA synthesis which occurs in the lymph nodes of mice injected with PSA. The adverse effect of ATx on suppressor cells was completely reversed by a neonatal thymus graft placed under the renal capsule and partially reversed by grafts given 600 r in vitro and to a limited extent by grafts given 1000 r. The injection of thymus extract also reversed the effect of ATx whereas splenic extract was inactive. It is suggested that the suppressor T cell which depresses contact sensitivity is dependent on the presence of the thymus because it requires a thymus hormone, and not primarily because it belongs to a short-lived population which is rapidly renewed by cells coming from the thymus.

Animals↗

The biodegradation mechanism of calcium phosphate biomaterials in bone.

This study was undertaken to understand the biodegradation mechanisms of calcium phosphate (Ca-P) biomaterials with different crystallization. Two types of sintered Ca-P porous ceramic (HA and beta-TCP) and a Ca-P bone cement (CPC) were implanted into cavities drilled in rabbit femoral and tibiae condyles. The results have shown that a material biodegradation was rapid in the beta-TCP and the CPC, but very weak in the HA. This biodegradation presented a decrease of material volume from the periphery to the center as well as a particle formation causing phagocytosis by numerous macrophages and multinucleated giant cells in the CPC. In the beta-TCP, there was a peripheral and central decrease of material volume as well as an absence of particle formation or visible phagocytosis. The process of biodegradation is considered to be directly influenced by the type of material crystallization. The sintered bioceramics processed at a high temperature exhibit good crystallization and are primarily degraded by a process dependent on interstitial liquids. However, the bone cement is formed by physicochemical crystallization and is degraded through a dissolution process associated with a cellular process.

Animals↗

Use of tricalcium phosphate or electrical stimulation to enhance the bone-porous implant interface.

Implant stabilization by biologic ingrowth into a porous surface offers a durable method of prosthetic fixation. These systems, however, lack the immediate stability offered by the use of acrylic bone cement. The interface strength of porous coated Co--Cr--Mo in a canine model does not approach that of acrylic bone cement until two weeks postoperatively. It is expected that this would be a minimum time period in clinical applications. Both chemical and electrical means have been advocated as methods to affect tissue ingrowth. A study using a canine model was undertaken to determine tissue ingrowth rates utilizing examples of these two methods: (1) impregnation of the porous structures with tricalcium phosphate powder (TCP); or (2) the application of an electrical stimulator to the implant with the implant itself serving as the cathode. Ten implants were coated with TCP, two each at weekly intervals from 1 to 5 weeks. Plain porous rods were likewise implanted, serving as the controls. While histology did reveal a slightly more dense bony structure, the interface bond strength was not affected by TCP. Electrical stimulation of the implant was similarly investigated with an additional time period of 10 weeks. Compared to the controls, the electrically stimulated implants reveal no statistically demonstratable difference in interface strength. Histologic specimens indicate larger areas of calcification than are observed in the controls.

Animals↗

Surface reactions of calcium phosphate ceramics to various solutions.

The surface reactions of calcium phosphate ceramics have been thought to play an important role in bonding with living bone. Hydroxyapatite (HA), tricalcium phosphate (TCP), and two kinds of apatite-containing glass ceramics were immersed in three types of solutions with different chemical constituents. The first solution was a physiological saline, the second contained phosphate (PO4), and the third was a balanced salt solution consisting of calcium (Ca), magnesium (Mg), and PO4. After serial incubation periods, changes in the solutions were assessed by measurement of total Ca, Mg, and PO4. The ceramic surfaces were studied using scanning electron spectroscopy, infrared reflection spectroscopy, and thin-film x-ray diffraction. The surface reactions of the ceramics were greatly affected by the chemical compositions of the surrounding media. In the complete solution with both Ca and PO4, a carbonated apatite layer was formed on the surfaces of HA, TCP, and the glass ceramics. In comparison to HA and TCP, the glass ceramics were characterized as Ca-releasing materials, the dissolved Ca creating an apatite layer on the surfaces in a few days, in conjunction with PO4 stock in the surrounding media. The immersion test with various solutions proved to be a simple and effective method of assessing surface conditions of ceramic materials.

Biocompatible Materials↗

Ca/P ratio effects on the degradation of hydroxyapatite in vitro.

Phase purity is a well-recognized but not well-understood variable affecting the biological integration of hydroxyapatite (HA)-based biomaterials. Minor amounts of specific, relevant impurities--calcium oxide (CaO) and tricalcium phosphate (TCP)--may often be present either as deliberate additions or as a result of decomposition during sintering. We investigated the influence of these two impurities in terms of their effects on surface morphology, weight loss/gain, and microstructural-level degradation. Phase purity variations were deliberately introduced into an otherwise-standardized HA matrix--the parent HA grain size and bulk density were relatively constant--produced using identical fabrication conditions. Stability varied markedly during exposure to mildly acidic, neutral, and pH 7.4 phosphate-buffered saline. Equivalent molar variations in the Ca/P ratio (1.62 vs 1.72) on either side of the stoichiometric ratio produce relatively small volumetric amounts of CaO (1.6 vol%) versus TCP (27 vol%) in HA. However, the relatively small amounts of CaO render the bulk more susceptible to degradation and more likely to have negative effects on a biological milieu. Interestingly, the presence of CaO is also a potent nucleating agent for the precipitation of new surface phases and detectable weight gain. The TCP-containing ceramic, in contrast, paradoxically exhibited slightly greater resistance to degradation than HA.

Biocompatible Materials↗

The effect of basic fibroblast growth factor on bone regeneration when released from a novel in situ setting tricalcium phosphate cement.

The osteostimulative effect of the basic fibroblast growth factor is well known, but it is dose dependent, and release kinetic depends on interactions with the used carrier. The aim of our study was to determine the osteostimulative effect of a composite, consisting of an in situ setting tricalcium phosphate cement and basic fibroblast growth factor. A trepanation defect of 1.5 mm in the femur diaphysis of Sprague-Dawley rats was filled with the in situ setting TCP cement combined with 0, 0.25, 2.5, or 25 microg rh bFGF, an autologous bone graft or left empty. The rats were euthanized after 1 and 3 weeks and examined by radiography, histology, histomorphometry, and bending test. The data were analyzed by the Wilcoxon and Kruskal-Wallis test. All TCP groups with or without bFGF showed a good bony ingrowth with a close bone-cement contact. Osseous ingrowth was not influenced by the addition of the different doses of bFGF as shown by histomorphometry. Also, mechanical strength was not affected. In conclusion, the combination of this in situ setting cement with bFGF is not useful for clinical application. The reason of these negative results remains unclear: the osteostimulative effect of bFGF is well known, and the TCP-cement was used as a carrier for rhBMP-2 successfully. These negative results may be due to a too slow or too fast release of bFGF from the cement.

Animals↗

In vitro cytocompatibility assessment of beta-tricalcium phosphate/carboxymethyl-chitin composite.

A novel bioabsorbable bone substitute composed of a beta-tricalcium phosphate (beta-TCP) and a carboxymethyl-chitin (CM-chitin) sodium has been developed. Rabbit tibia defects (4 mm in diameter) were repaired after 4 weeks more effectively by the composite compared with a sham-operation group. To further investigate the biological safety of the components, genotoxicity and carcinogenicity of an extract prepared from the composite were determined using four different in vitro assays. The main extract component was identified as CM-chitin sodium [average molecular weight (Mw) approximately 230 kDa] as determined by Fourier transform infrared spectroscopy and gel permeation chromatography analysis. The concentrations of P and Ca possibly derived from beta-TCP were 17.7 and 37.1 microg/g, respectively, as determined by inductively coupled plasma mass spectroscopy. Both the metabolic activation and nonactivation (-S9) systems of the rat microsome S9 fraction were used to perform a genotoxicity evaluation using the Ames test and chromosome aberration assay on Chinese hamster lung fibroblast cells treated with the extract. In these assays, no genotoxicity was detected with doses < or =5 mg/mL (maximum concentration). The cell transformation assay using BALB/c 3T3 cells and the metabolic cooperation assay with V79 cells both showed negative results for any tumor-promoting activity caused by the extract (approximately 5 mg/mL). These results indicate that the bioabsorbable beta-TCP/CM-chitin composite is a highly biocompatible bone substitute.

3T3 Cells↗

Biaxial flexure testing of calcium phosphate bioceramics for use in tissue engineering.

This study analyzes data from 206 CaP specimens (68 HA, 70 BCP, and 68 beta-TCP) fractured via biaxial flexure testing. Specimens were divided into four groups: (a) Group I, dry; (b) Group II, wet (day 0, immersion time approximately 5-10 s); (c) Group III, after immersion in media for 21 days (day 21); and (d) Group IV, after culturing osteoblasts (OBs) on the surface for 21 days (day 21 with cells). X-ray diffraction verified the presence of minor second phases in HA and beta-TCP while BCP was a biphasic mixture of HA and beta-TCP with minor phases present. The statistical significance (p < 0.05) of differences in the measured biaxial flexure fracture strength, S, between groups was assessed via one-way ANOVA with Tukey's test. Also, a two-parameter Weibull analysis assessed the mechanical reliability of each group. Osteoblasts increase the biaxial flexure fracture strength in a statistically significant way compared to both the HA discs in Groups II and III. Scanning electron microscope examination revealed grain boundary grooving on the sintered surfaces and with thermal expansion anisotropy, likely leads to the observed rapid strength decline upon exposure to media found in Groups II, III and IV.

Animals↗

Osteoclastic resorption of calcium phosphate coatings applied with electrostatic spray deposition (ESD), in vitro.

Calcium phosphate (CaP) coatings have been applied on titanium implants to improve the bioactivity in order to favor the initial bone healing response. Recently, a new technique has been developed to apply CaP coatings: electrostatic spray deposition (ESD). Although ESD-derived coatings have several benefits, it is not known whether they are degradable. This study was designed to examine the cell-mediated degradation of two ESD-derived coatings with different chemical compositions, that is, beta-tricalcium phosphate (beta-TCP) and carbonate apatite (CA). First, coatings were deposited and analyzed physiochemically. Subsequently, rat bone marrow-derived osteoclastlike cells were seeded on the coatings, and analyzed with osteoclast-specific markers, scanning electron microscopy, and transmission electron microscopy. Results showed that both coatings exhibited porous morphologies, with an average pore size of less than 1 microm (beta-TCP), or larger than 1 microm (CA). After heat treatment, both coatings were crystalline in structure. The Ca/P ratios were 1.4 to 1.5 for the beta-TCP coating, and 1.8 to 2.0 for the CA coating. After 8 and 12 days of culture, multinucleated osteoclastlike cells were observed on both coatings. The osteoclast phenotype was confirmed by tartrate resistant acid phosphatase (TRAP) staining, and immunostaining against the calcitonin receptor. Using scanning electron microscopy, numerous resorption lacunae were observed in both coatings. Finally, transmission electron microscopy of TRAP-positive cells confirmed the osteoclastlike aspect of the cells revealing multiple nuclei and a ruffled border. In conclusion, CaP coatings produced with the ESD process can be degraded by osteoclasts.

Absorbable Implants↗

Repair of 20-mm long rabbit radial bone defects using BMP-derived peptide combined with an alpha-tricalcium phosphate scaffold.

In previous studies, we have reported that the BMP-2-derived peptide KIPKASSVPTELSAISTLYL, corresponding to BMP-2 residues 73-92, binds to a BMP-2-specific receptor, and elevates both alkaline phosphatase activity and osteocalcin mRNA in the murine mesenchymal cell line, C3H10T1/2. This 73-92 peptide conjugated to a covalently crosslinked alginate gel induced ectopic bone formation in rat calf muscle, and activated osteoblasts to promote the repair of rat tibial bone defects. Here, we report repair of 20-mm long rabbit radial bone defects using the 73-92 peptide combined with a porous alpha-tricalcium phosphate (TCP) scaffold. In vitro, the 73-92 peptide was released from the porous alpha-TCP scaffold over more than one week. In vivo, radiomorphometric analysis showed that the 73-92 peptide combined with the porous alpha-TCP scaffold promoted calcification in the implanted area in a dose-dependent manner, and that 5 mg of the 73-92 peptide induced connection of 20-mm long defects, defects of critical size, 12 weeks after implantation. Histological examination revealed newly formed bone and a marrow cavity in the implanted area. The area of bone denser than 690 mg/cm(3) induced by the 73-92 peptide was nearly equal to that of the contralateral radius.

Amino Acid Sequence↗

Matrix-mediated retention of in vitro osteogenic differentiation potential and in vivo bone-forming capacity by human adult bone marrow-derived mesenchymal stem cells during ex vivo expansion.

Mesenchymal stem cells (MSCs) represent an attractive cell source for tissue engineering applications, since they are readily isolated from adult bone marrow and have the ability to differentiate along multiple mesenchymal lineages, including osteogenic. Currently, utilization of MSCs for bone tissue engineering is limited because of the attenuation of their osteogenic differentiation potential and in vivo bone-forming capacity following ex vivo expansion on conventional tissue culture plastic (TCP). Previously, we demonstrated that a denatured type I collagen (DC) matrix promotes the maintenance of MSC in vitro osteogenic differentiation potential during ex vivo expansion in contrast to TCP. In this study, we further demonstrate that the maintenance of MSC osteogenic differentiation potential is primarily due to the ability of DC matrix to influence the retention of early passage osteogenic functions in late passage (LP) cells during ex vivo expansion, in contrast to solely enhancing attenuated LP cellular functions during osteogenic differentiation. Serum-associated factors played a significant role in influencing the retention of MSC osteogenic differentiation potential during expansion on the DC matrix. Significantly, the results show that although LP cells expanded ex vivo on TCP highly attentuate their in vivo bone-forming capacity, the expansion of MSCs on DC matrix preserves this ability as determined by histological, histomorphometric, and bone mineral density evaluations of MSC-seeded hydroxyapatite/tricalcium phosphate scaffolds following an 8-week implantation period within a heterotopic muscle pouch model. These findings provide further insight into the importance of matrix-mediated effects on MSC function and selective factors important in this process.

Adult Stem Cells↗

Increased osteoblast adhesion on nanograined hydroxyapatite and tricalcium phosphate containing calcium titanate.

Depending on the coating method utilized and subsequent heat treatments (such as through the use of plasma-spray deposition), inter-diffusion of atomic species across titanium (Ti) and hydroxyapatite (HA) coatings may result. These events may lead to structural and compositional changes that consequently cause unanticipated HA phase transformations which may clearly influence the performance of an orthopedic implant. Thus, the objective of the present in vitro study was to compare the cytocompatibility properties of chemistries that may form at the Ti:HA interface, specifically HA, tricalcium phosphate (TCP), HA doped with Ti, and those containing calcium titanate (CaTiO(3)). In doing so, results of this study showed that osteoblast (bone-forming cells) adhesion increased with greater CaTiO(3) substitutions in either HA or TCP. Specifically, osteoblast adhesion on HA and TCP composites with CaTiO(3) was almost 4.5 times higher than that over pure HA. Material characterization studies revealed that enhanced osteoblast adhesion on these compacts may be due to increasing shrinkage in the unit lattice parameters and decreasing grain size. Although all CaTiO(3) composites exhibited excellent osteoblast adhesion results, Ca(9)HPO(4)(PO(4))(5)OH phase transformation into TCP/CaTiO(3) increased osteoblast adhesion the most; because of these reasons, these materials should be further studied for orthopedic applications.

Bone Substitutes↗

Metabolism of chlorpyrifos and chlorpyrifos oxon by human hepatocytes.

The metabolism of chlorpyrifos (CPS) and chlorpyrifos oxon (CPO) by human hepatocytes and human liver S9 fractions was investigated using LC-MS/MS. Cytochrome P450 (CYP)-dependent and phase II-related products were determined following incubation with CPS and CPO. CYP-related products, 3,5,6-trichloro-2-pyridinol (TCP), diethyl thiophosphate, and dealkylated CPS, were found following CPS treatment and dealkylated CPO following CPO treatment. Diethyl phosphate was not identified because of its high polarity and lack of retention with the chromatographic conditions employed. Phase II-related conjugates, including O- and S-glucuronides as well as 11 GSH-derived metabolites, were identified in CPS-treated human hepatocytes, although the O-sulfate of TCP conjugate was found only when human liver S9 fractions were used as the enzyme source. O-Glucuronide of TCP was also identified in CPO-treated hepatocytes. CPS and CPO were identified using HPLC-UV after CPS metabolism by the human liver S9 fraction. However, CPO was not found following treatment of human hepatocytes with either CPS or CPO. These results suggest that human liver plays an important role in detoxification, rather than activation, of CPS.

Adult↗

In vivo studies of Gd-DTPA-monoclonal antibody and gd-porphyrins: potential magnetic resonance imaging contrast agents for melanoma.

New tumor-specific contrast agents for clinical imaging and therapy for cancer are required. To this end Gd-H (Gd-hematoporphyrin), Gd-TCP (Gd-tetra-carboranylmethoxyphenyl-porphyrin), Gd-DTPA-WM53, and Gd-DTPA-9.2.27 were synthesized and administered by systemic injection to nude mice with human melanoma (MM-138) xenografts. The biodistribution T1 relaxation times and magnetic resonance (MR) image signal enhancement of the contrast agents are presented for the first time and compared for each group of five mice. A change (20%) in T1 relaxation times of water in human melanoma tumor xenografts was revealed 24 hours after injection of the labeled immunoconjugate Gd-DTPA-9.2.27. The percent of injected antibody or gadolinium that localized to the tumor was measured by inductively coupled plasma atomic emission spectroscopy (ICP-AES) to be approximately 35%. A higher concentration of gadolinium was achieved compared with nonspecific compounds, indicating selective delivery of Gd-DTPA-9.2.27 to the melanoma xenografts. Porphyrin-based contrast agents (Gd-H and Gd-TCP) also showed significant uptake in melanomas. The uptake of Gd-TCP by the tumor was sufficient to deliver boron atoms into the tumor, making possible dual use for both MR imaging (MRI) and boron neutron capture therapy (BNCT). The linear relationship found between the paramagnetic contribution to the relaxation rates and contrast agent concentration allows quantitative studies of paramagnetic contrast agent uptake.

Animals↗

The evaluation of a biphasic calcium phosphate ceramic for use in grafting long-bone diaphyseal defects.

The effectiveness of a sintered hydroxyapatite-tricalcium phosphate (HA-TCP) ceramic in bridging large diaphyseal defects in the canine ulna was studied. One-hundred percent morselized HA-TCP, a 50:50 mixture of morselized HA-TCP, and autogenous cancellous bone, and 100% autogenous cancellous bone were used to bridge 2.5-cm defects in the left ulnae of three groups of six dogs each. At 24 weeks the ulnae were explanted and studied by radiography, microradiography, mechanical testing, and histology. Pure HA/TCP was not osteoinductive, and four of six ulnae in this group progressed to a fibrous nonunion. The HA/TCP-cancellous bone mixture and pure cancellous bone were approximately equal in effect, leading to good callus formation at 4 weeks and strong bony union by 24 weeks, with no evidence of bioincompatibility. Morselized HA/TCP promises to be useful as a graft extender when mixed with autogenous cancellous bone.

Animals↗

Sensitivity enhancement of chlorinated phenols by continuous flow liquid membrane extraction followed by capillary electrophoresis.

This paper describes a new analytical system, based on the combination of continuous flow liquid membrane extraction (CFLME) enrichment and capillary electrophoresis (CE) separation, for analysis of chlorinated phenols in water samples. Five chlorinated phenols including 3-chlorophenol (3CP), 4-chlorophenol (4CP) 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP), and pentachlorophenol (PCP) were separated by CE with Tris/sodium dihydrogen phosphate solution containing methanol 1% (v/v) as the run buffer. CFLME related parameters were investigated and optimal enrichment was obtained by using 0.3 mol L(-1) Tris as acceptor and with a sample pH 5.0, a sample flow rate of 4.0 mL min(-1), and an enrichment sample volume of 150 mL. The detection limit (S/N= 3) was 6.9, 1.0, and 1.7 ng mL(-1) for DCP, PCP, and TCP, respectively. The reproducibility (RSD%, n = 6) was 5.7 for DCP, 2.5 for PCP, and 2.8% for TCP (n = 6). The proposed method was applied to the determination of chlorinated phenols in spiked water samples with relatively satisfactory recoveries.

Calibration↗

Determination of phenol in landfill leachate by using microchip capillary electrophoresis with end-channel amperometric detection.

Phenol, 2,4-dichlorophenol (2,4-DCP), and 2,4,6-trichlorophenol (2,4,6-TCP) were baseline separated by using a homemade microchip CE with an end-channel amperometric detector where a 50 microm Pt microdisk working electrode (WE) and a Pt cathode were integrated onto the microchip itself. Separation parameters such as injection time and voltage, pH of the buffer, online pretreatment condition for WE, reproducibility, and detection potential were investigated. Under the selected separation conditions, the linear ranges for phenol, 2,4-DCP, and 2,4,6-TCP were 2-200, 4-400, and 4-400 microM, respectively. The LODs were 0.4, 0.5, and 0.7 microM for phenol, 2,4-DCP, and 2,4,6-TCP, respectively (S/N = 3). The standard addition method was successfully applied to the analysis of landfill leachate samples and the concentration of phenol in the landfill leachate samples was measured to be 0.32 and 0.21 mM, respectively. The recoveries were in the range of 85-103% and corresponding RSDs were less than 5.5%.

Buffers↗