Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DENTAL APPARATUS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

Mechanical properties of laser welds of titanium in dentistry by pulsed Nd:YAG laser apparatus.

The use of titanium in dentistry is increasing, and an adequate method of joining titanium units of restorations is needed. This study examined the welding of titanium with a normal pulse Nd:YAG laser. Laser welding of titanium was effective when performed in an argon atmosphere. ANOVA for the three-point bending test showed a correlation between the bending strength of a weld, the atmosphere under which the irradiation is performed, and the intensity of the irradiation.

Analysis of Variance↗

Sexual dimorphism and interspecific cranial form in two capuchin species: Cebus albifrons and C. apella.

Ontogenetic patterns of sexual dimorphism and cranial form in two capuchin monkeys, Cebus albifrons and C. apella, are investigated by means of univariate, bivariate, and multivariate statistics. The analyses are based on 23 linear variables. Univariate analyses indicate that similar ontogenetic patterns of cranial sexual dimorphism are present; however, interspecific differences exist in timing. Ontogenetic scaling is present in both species' crania; however, it is more prevalent in C. albifrons. Several departures are present in cranial regions associated with orbital shape, the dental arcade, and the muscles of mastication. The latter two indicate that sexual differences in diet and/or foraging strategies may exist. Sexual selection is suggested as being the primary selective regime underlying the observed patterns of cranial sexual dimorphism in each species. Interspecific comparisons confirm that C. apella possesses a more dimorphic cranium than C. albifrons and that sexual dimorphism in C. apella begins earlier in development. Although interspecific ontogenetic scaling is present in some cranial variables, C. apella is not just a scaled-up version of C. albifrons. These sympatric congeners seem to be differentiated by variables related to the orbital region and the masticatory apparatus, as indicated by both departures from ontogenetic scaling and results of the discriminant function analysis. Ecological selection, rather than varying degrees of sexual selection, is likely to be responsible for this finding given that C. apella is known to consume hard-object foods. This is consistent with the predicted outcome of the competitive exclusion principle.

Animals↗

A study of recording accuracy in linear measurements displayed by sirognathograph.

The recording accuracy of Sirognathograph (Siemens, West Germany) was conducted by means of an experimental apparatus. Diagrams of mandibular border movements in three dimensional directions were performed. The results showed the distortion was not recognized within 5 mm of primary condition in a subject, but slightly between 5 mm and 10 mm. In a distance of more than 15 mm, a considerable distortion was increased until at the maximum opening position.

Dental Equipment↗

Realignment of periodontally-affected maxillary teeth--a periodontist's perspective. Part II: Case reports.

Orthodontic therapy as part of a patient's overall periodontal rehabilitation may have many benefits. For the three patients described in this report, these benefits included: an improvement in appearance, which indirectly also increases the patient's motivation; improved access for cleaning teeth; restitution of edge-to-edge incisal occlusion; an improvement in lip-seal, thereby reducing anterior gingival dryness; reduction in the non-axial loading which can act as a cofactor with plaque to accelerate periodontal destruction; and possible regeneration of lost attachment apparatus through the combination of surgery and orthodontic tooth-intrusion. Successful orthodontic treatment in these patients depended upon adequate control of periodontal inflammation by thorough scaling and the maintenance of good oral hygiene. Treatment may be carried out in patients suffering from refractory periodontitis, provided inflammation is controlled during the period of orthodontic tooth movement; however, close monitoring is needed, especially if the patient continues to smoke.

Adult↗

[Evaluation of cardiac function in dentists during professional activity].

In this study research was carried out a comparison between different dental situations by using a common parameter: myocardial oxygen consumption, accurately expressed in terms of cardiac exercise. Important increase in the previously specified parameter in dentists were provocated by dental extractions conducted on anxious patients. Tooth extractions undertaken on calm and cooperative patients determined an increase of cardiac exercise in dentists similar to those caused by amalgam restoration conducted on a manikin, but not in ergonomic work conditions. The situation, referred previously, resulted more stressing for the dentist, as regard to a similar restoration conducted, this time, in ergonomic work conditions. Amalgam restoration performed on calm and cooperative patients caused alterations of cardiac exercise as referred previously to those provocated by a similar restoration conducted on a manikin in ergonomic conditions. These findings show that work conditions and patients anxiety have a negative influence on the dentists' cardiovascular apparatus. The corrisponding poor modification of the oxygen consumption in the whole organism demonstrates that major part of cardiac exercise is dissipated by stress.

Anxiety↗

Immunohistochemical investigation on the pattern of vimentin expression in regenerated and intact monkey and human periodontal ligament.

The expression of vimentin is well documented in the intact animal and human periodontal ligament (PDL), but there is limited information on the pattern of vimentin expression in the regenerated PDL. The aim of the present study was to investigate the pattern of vimentin expression in the regenerated and intact monkey and human PDL. A total of 12 chronic recession-type defects were created in three monkeys (Macaca fascicularis) and treated either with guided tissue regeneration (GTR), or with an enamel matrix protein derivative (EMD). After 5 months, the animals were sacrificed and specimens containing the defects and surrounding tissues were dissected free, decalcified in EDTA and embedded in paraffin. Sections were labelled immunohistochemically by using monoclonal antibody against vimentin (VIM 3B4). Twelve patients, each of whom displayed one deep intrabony defect scheduled for extraction were treated with GTR, EMD or combination of EMD+natural bone mineral (NBM). Following a healing period of 6 months, the teeth were extracted "en block" and immunohistochemically analysed according to the same protocol as described in monkeys. The results revealed that in both monkeys and humans the newly formed PDL was labelled similarly for vimentin to the intact (non-treated) PDL. In all specimens, the newly formed PDL was in continuation with the intact parts of PDL, thus suggesting that the mesenchymal cells capable of regenerating the attachment apparatus may have their origin in the intact PDL. In conclusion, the present findings indicate that (a) the reformed PDL displayed a similar expression of vimentin to the intact (original) PDL, and (b) the cells capable of regenerating new PDL and new cementum appear to be of mesenchymal origin and their source may be in the intact PDL.

Animals↗

The effect of powder-liquid ratio and the mixing method on the surface hardness of phosphate-bonded investment materials.

In this experimental study the surface-hardness changes of three phosphate-bonded investments were observed in relation to: a) the ratio of liquid-powder, b) the way of the mixing, in 3 hours and 24 hours after mixing. The Vickers hardness test was used for testing the surface hardness of the specimens (ISOMA SA, Bienne, Swiss, hardness testing apparatus). This study indicated that the surface hardness of the specimens increased after mechanical mixing, and also that it was higher in 24 hours than in 3 hours. Also, as more water was included in the mixing liquid, as lower became the surface hardness of the materials. Finally, it was observed that one material appeared to have the greatest fluctuations of surface hardness: Maruvest MI.

Dental Casting Investment↗

The role of orthodontics as an adjunct to periodontal therapy.

In the formulation of a treatment plan for patients with advanced periodontal disease, the benefits that orhtodontics can supply must be considered. By improving the position of malposed teeth, a better environment is created for the health of the gingivae and attachment apparatus, as well as the possibility to improve osseous defects as the result of orthodontically stimulated osteogenic activity. The ultimate goal of treatment must be, in addition to control of inflammation, plaque and trauma, the creation of optimal morphologic and functional conditions which will allow these objectives to be attained. This will provide the prosthodontist and periodontist with a better chance to prolong the life of the dention.

Adult↗

A comparison of various removable partial denture clasp materials and fabrication procedure for placing clasps on canine and premolar teeth.

There is no established protocol for selection among the different retentive material-attachment combinations for clasps other than tradition or laboratory preference. Various wrought-wire, cast-metal, and thermoplastic materials were subjected to several fabrication procedures and tested in a custom-designed force displacement apparatus. The wrought wires included ADA Spec. No. 7 type I and type II alloys and other precious and nonprecious alloys. A graphic means was devised to allow the rational selection of wrought-wire clasp-arm combinations for placing clasps on canine and premolar teeth. Guidelines for using straight wire data for curved wire applications are indicated.

Acrylic Resins↗

[Ionofluor + laser = prevention].

On the basis of experience gained in previous research, an original technique for fixing fluoride on the enamel of healthy teeth for preventive purposes is described. An apparatus of ionophoresis with which it was possible to contain fluoride in the ionic state, and later a low power laser system with double red and infrared emission mixed in optic fibre were used to achieve this result. The proposed technique is not only extremely effective, offering as it does protection for at least 3 years, but is is very simple, practical and economical.

Adolescent↗

A locking endurance test for hinged sections of removable partial dentures.

In this study an apparatus is described that will open and close a hinged section of a removable partial denture. A metal framework based on a "swinglock" type of hinge and latch design was constructed. An electric motor provided the drive for the opening and closing mechanism, which when operated set the device in motion. The device and results of a test run of 12,000 opening and closing operations are discussed.

Dental Clasps↗

Occlusal and orthodontic considerations in the periodontally involved dentition.

In the formulation of a treatment plan for patients with advanced periodontal disease, we must consider the benefits that orthodontics can supply. By improving the position of malposed teeth, we create a better environment for the health of the gingivae and attachment apparatus, as well as the possibility of improving osseous defects as the result of orthodontically stimulated osteogenic activity. The ultimate goal of treatment must be, in addition to control of inflammation, plaque and trauma, the creation of optimal morphologic and functional conditions which will allow these objectives to be obtained. This will provide the prosthodontist and periodontist a better chance to prolong the life of the dentition.

Alveolar Process↗

An apparatus for the preparation of cavities in the canine teeth of ferrets.

An apparatus is described for the preparation of standardized cavities in the canine teeth of ferrets. One hundred cavities were cut, and there was highly significant correlation between the distance the bur was advanced (machine depth) and the cavity depth in dentine. It was possible to cut cavities predictively with small and large residual dentine thicknesses. The method described was not damaging to the pulp.

Animals↗

[Occlusion in the etiology of craniomandibular disorders. Current directions].

Craniomandibular disorders are a pathology with a multifactorial genesis where the aetiological aspects it represented by emotional and occlusal factors. These provoke muscular hyperactivity so determining a change in all components of the stomatognathic apparatus. A critical analysis of the literature leads to an analysis of the importance of the occlusal factor in the aetiology of MCD. The conclusions reached are that the ideal occlusion is a theoretical concept. Physiological occlusion is the situation in which, independently of the number, lay-out and relationship between teeth there exists a subjective occlusal stability and a satisfactory masticatory, phonatory and aesthetic function.

Dental Occlusion↗

[Functional characteristics of periodontium sensing apparatus and its significance in prosthetic stomatologic clinic].

Using developed by us method and instrument Periosensomer the sensor function of the periodontium on the initial stages of masticatory act (test of holding and splitting of food object) in persons with different functional periodontium status was explored. Evaluation of the sensor function of the periodontium and dynamics of the sensor reaction during holding and splitting of food object can be used as the method of functional diagnostics in the prosthetic stomatological clinic.

Adult↗

LADD syndrome: report of new cases and review of the clinical spectrum.

The lacrimo-auriculo-dento-digital or LADD syndrome is a true multiple congenital anomalies (MCA) syndrome characterized by hypoplasias, aplasias or atresias in the lacrimal system; anomalies of the ears and hearing loss; hypoplasias, aplasias or atresias in the region of the salivary system; dental anomalies; and digital malformations. The syndrome is thought to be an autosomal dominant trait with variable expressivity. It seems to be rare. Two new cases are reported and the clinical spectrum of the syndrome is reviewed. The paediatrician who is responsible for the child as a whole individual should know the LADD syndrome. Its early recognition may be important.

Abnormalities, Multiple↗

The influence of sodium hypochlorite irrigation on the accuracy of the Root ZX electronic apex locator.

The purpose of this in vitro investigation was to determine whether the presence of sodium hypochlorite influences the accuracy of the Root ZX electronic apex locator. Forty, extracted, human teeth were mounted in an experimental apparatus. After achieving ideal access, working length measurements were obtained using the Root ZX. The canals were flushed with 2.125% sodium hypochlorite and measurements were again made with the electronic apex locator. Before measuring a third time, 5.25% sodium hypochlorite was then administered to each canal. Finally, the tooth was removed from the apparatus and the actual canal length was determined by measuring a file brought to the apical constriction (verified by direct visualization). No significant differences were found between the experimental groups. Overall, Root ZX measurements were within 0.5 mm of the actual length 83% of the time. The results of this study indicate that the Root ZX is not adversely affected by the presence of sodium hypochlorite.

Analysis of Variance↗

Application of a centrifugal shooting type polishing system to polish pure titanium.

Titanium is a difficult metal to grind, and thus mechanical polishing using conventional rotating tools takes a lot of time. The purpose of this study was to examine the polishing effect of a centrifugal shooting type polishing system on a pure titanium surface processed with a CAD/CAM system. The specimens' surfaces were polished for various times using this apparatus, then the center line average roughness (Ra) of each specimen was measured with surface roughness measuring apparatus. In addition, the surfaces after polishing were observed with a scanning electron microscope. After 50 sec of polishing, Ra decreased from 1.1 microns to less than 0.6 micron, and after 60 sec of polishing the cutting marks generated by the CAD/CAM system disappeared and a smooth surface was observed. Therefore, it appears that a centrifugal shooting type polishing system is effective at polishing pure titanium.

Computer-Aided Design↗