Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “layer”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
PubMed1988

Corticotectal circuit in the cat: a functional analysis of the lateral geniculate nucleus layers of origin.

1. The dorsal lateral geniculate nucleus (LGN) of the cat is a major thalamic relay between the retina and several visual cortical areas. These cortical areas in turn project to the superior colliculus (SC). The aim of the present experiment was to determine which LGN layers provide a necessary input to the corticotectal circuit. 2. Individual layers of the LGN were reversibly inactivated by microinjection of cobalt chloride during recording of visual responses in the retinotopically corresponding part of the superior colliculus. 3. For cells driven through the contralateral eye, inactivation of layer A or the medial interlaminar nucleus (MIN) had little effect on visual responsiveness in the superior colliculus. In contrast, inactivation of layer C abolished visual responses at one-quarter of the SC recording sites, reduced responses at another quarter, and left half of the recording sites unaffected. 4. For cells driven through the ipsilateral eye, inactivation of layer C1 or the MIN had no effect. Inactivation of layer A1 uniformly reduced visual responses in the superior colliculus and usually abolished them entirely. 5. These results are compatible with previous work showing that cortical input to the SC originates from Y-cells. They indicate that two of the five Y-cell containing layers (A1 and C) provide major inputs to the corticotectal circuit. The results suggest that layer A1 is functionally allied to layer C as well as to layer A.

Animals↗
PubMed1994

Electrophysiological and morphological characteristics of layer VI pyramidal cells in the cat motor cortex.

1. Intracellular recordings were made from layer VI pyramidal cells in in vitro slice preparations of the cat motor cortex (area 4 gamma). Layer VI pyramidal cells were identified morphologically by intracellular injection of biocytin. 2. Of 22 layer VI pyramidal cells examined, single action potentials were followed by depolarizing afterpotentials (DAP) in 9 cells, but were not followed by DAP in the remaining 13 cells. The amplitude of DAP was 3.4 +/- 1.4 mV (mean +/- SD, n = 9) when measured from the negative peak of fast afterhyperpolarization to the peak of DAP. 3. In response to depolarizing current pulses with a duration of 300-400 ms, pyramidal cells showing DAP displayed a train of action potentials in a phasic-tonic pattern without any appreciable adaptation in the tonic firing, whereas pyramidal cells lacking DAP exhibited a weak adaptation after phasic firing. Anomalous rectification was seen in both pyramidal cells showing DAP and those lacking DAP. 4. Repetitive doublet or triplet spiking was induced in DAP-showing pyramidal cells in response to a depolarizing current pulse after injecting strong depolarizing current pulses of 400 ms duration at 1 Hz for 30-60 s, but was never induced in DAP-lacking pyramidal cells. Doublet/triplet spiking lasted 5-10 min and returned to the original single spiking. An application of CsCl induced a burst firing in DAP-showing pyramidal cells. 5. In the nine pyramidal cells showing DAP, seven cells had shorter apical dendrites that arborized extensively at layer V and terminated in the middle part of layer III. In the 13 pyramidal cells lacking DAP, 11 cells had longer apical dendrites that arborized less frequently and extended into layer II or I. Main axons could be traced into the deep white matter in 17 of the 22 layer VI pyramidal cells examined. 6. Ascending recurrent axon collaterals were more prominent in pyramidal cells with longer apical dendrites than in pyramidal cells with shorter apical dendrites. The terminal bouton-like swelling observed along the recurrent axon collaterals arising from the pyramidal cells with longer apical dendrite were distributed most densely at the level between the bottom part of layer III and the top part of layer V. In contrast, those arising from the pyramidal cells with shorter apical dendrite were distributed mainly at the levels of layers V and VI.(ABSTRACT TRUNCATED AT 400 WORDS)

Animals↗
PubMed1998

Low-voltage activated T-type calcium currents are differently expressed in superficial and deep layers of guinea pig piriform cortex.

A variety of voltage-dependent calcium conductances are known to control neuronal excitability by boosting peripheral synaptic potentials and by shaping neuronal firing patterns. The existence and functional significance of a differential expression of low- and high-voltage activated (LVA and HVA, respectively) calcium currents in subpopulations of neurons, acutely isolated from different layers of the guinea pig piriform cortex, were investigated with the whole cell variant of the patch-clamp technique. Calcium currents were recorded from pyramidal and multipolar neurons dissociated from layers II, III, and IV. Average membrane capacitance was larger in layer IV cells [13.1 +/- 6.2 (SD) pF] than in neurons from layers II and III (8.6 +/- 2.8 and 7.9 +/- 3.1 pF, respectively). Neurons from all layers showed HVA calcium currents with an activation voltage range positive to -40 mV. Neurons dissociated from layers III and IV showed an LVA calcium current with the biophysical properties of a T-type conductance. Such a current displayed the following characteristics: 1) showed maximal amplitude of 11-16 pA/pF at -30 mV, 2) inactivated rapidly with a time constant of approximately 22 ms at -30 mV, and 3) was completely steady-state inactivated at -60 mV. Only a subpopulation of layer II neurons (group 2 cells; circa 18%) displayed an LVA calcium current similar to that observed in deep layers. The general properties of layer II-group 2 cells were otherwise identical to those of group 1 neurons. The present study demonstrates that LVA calcium currents are differentially expressed in neurons acutely dissociated from distinct layers of the guinea pig piriform cortex.

Animals↗
PubMed1999

Effect of the group II metabotropic glutamate agonist, 2R,4R-APDC, varies with age, layer, and visual experience in the visual cortex.

Group II metabotropic glutamate receptors (mGluR 2/3) are distributed differentially across the layers of cat visual cortex, and this distribution varies with age. At 3-4 wk, mGluR 2/3 receptor immunoreactivity is present in all layers. By 6-8 wk of age, it is still present in extragranular layers (2, 3, 5, and 6) but has disappeared from layer 4, and dark-rearing postpones the disappearance of Group II receptors from layer 4. We examined the physiological effects of Group II activation, to see if these effects varied similarly. The responses of single neurons in cat primary visual cortex were recorded to visual stimulation, then the effect of iontophoresis of 2R,4R-4 aminopyrrolidine-2, 4-decarboxylate (2R,4R-APDC), a Group II specific agonist, was observed in animals between 3 wk and adulthood. The effect of 2R, 4R-APDC was generally suppressive, reducing both the visual response and spontaneous activity of single neurons. The developmental changes were in agreement with the immunohistochemical results: 2R, 4R-APDC had effects on cells in all layers in animals of 3-4 wk but not in layer 4 of animals >6 wk old. Moreover, the effect of 2R, 4R-APDC was reduced in the cortex of older animals (>22 wk). Dark-rearing animals to 47-54 days maintained the effects of 2R, 4R-APDC in layer 4. The disappearance of Group II mGluRs from layer 4 between 3 and 6 wk of age is correlated with the segregation of ocular dominance columns in that layer, raising the possibility that mGluRs 2/3 are involved in this process.

Aging↗
PubMed1998

Fluoride-dependent formation of mineralized layers in bovine dentin during demineralization in vitro.

Demineralization of dentin in the presence of fluoride produces lesions with a mineralized surface layer which becomes thicker and more mineralized with higher fluoride concentrations whereas the lesion depth is hardly affected. The aim of this study was to investigate the effects of the time of fluoride treatment and the amount of fluoride taken up on the properties of the mineralized layer. Discs of bovine dentin embedded in methylmethacrylate with one surface exposed were demineralized in 50 mM acetic acid, 2.2 mM CaCl2, 2.2 mM KH2PO4, pH 5.0. At the start and/or later during the demineralization period, the specimens were incubated individually for 1 or 2 days in 10 ml of the same demineralization solution supplemented with 0.5, 2.0 or 5.0 ppm fluoride, which was then assessed for changes in calcium and fluoride concentrations. After 2, 5 and 8 days, specimens were sectioned for microradiographic analysis so as to follow development of the lesions and the mineralized layers. The results were the following: While demineralization with fluoride present at the first day led to the formation of a surface layer, fluoride present only at a later day produced a subsurface layer, not at the lesion front but closer to the surface. This layer resulted from (re)precipitation and not from preservation of the original mineral. The 'integrated mineral content' of the surface layer increased linearly with the uptake of fluoride, which resulted in an apparent fluorapatite content of about 20 vol%. The profiles of the surface layers remained unchanged during continued demineralization in the absence of fluoride. It was concluded that in the presence of fluoride mineral loss is reduced as a result of the reprecipitation of dissolved mineral ions as a layer of fluoride-enriched apatite. This layer does not offer protection of underlying dentin against continued demineralization.

Acetic Acid↗
PubMed2004

Myosin light chain 1 isoforms in slow fibers from global and orbital layers of canine rectus muscles.

PURPOSE: Initial results of an examination of the low molecular mass (< or =45 kDa) protein composition of canine rectus muscle homogenates, based on gel electrophoresis, revealed a distinct difference between the global and orbital layers in the myosin light chain (MLC)-1 region. The objectives of the present study were, therefore, to identify isoforms of MLC1 in homogenates of the global and orbital layers of adult canine rectus muscles and to determine the MLC1 isoform expression pattern among single muscle fibers isolated from both layers. METHODS: Muscle homogenates and single fibers from the global and orbital layers of canine rectus muscles were analyzed, using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF-MS) was used to identify a protein band in the orbital layer that comigrated with MLC1 in the adult canine atrium. RESULTS: Adult canine extraocular rectus muscles expressed embryonic skeletal/atrial MLC1 (MLC1(E/A)), in addition to the fast-type MLC1 (MLC1F) and slow-type MLC1 (MLC1S) isoforms expressed in limb skeletal muscles. MLC1(E/A) was detected in slow fibers of the orbital but not the global layer, and MLC1S was detected in slow fibers in only the global but not the orbital layer. Densitometric analysis of gel bands from homogenates supported these results, with significantly greater amounts of MLC1S in the global layer and of MLC1(E/A) in the orbital layer. CONCLUSIONS: MLC1(E/A) is expressed in rectus muscles of adult dogs. Furthermore, two types of slow fibers, distinguished on the basis of MLC1 isoform expression, exist in separate layers of canine rectus muscles.

Animals↗
PubMed2005

Drosophila N-cadherin functions in the first stage of the two-stage layer-selection process of R7 photoreceptor afferents.

Visual information received from the three types of photoreceptor neurons (R1-R6, R7 and R8) in the fly compound eyes converges to the external part of the medulla neuropil (M1-M6 layers) in a layer-specific fashion: R7 and R8 axons terminate at the M6 and M3 layers, respectively, whereas lamina neurons (L1-L5) relay R1-R6 to multiple medulla layers (M1-M5). Here, we show that during development, R7 and R8 neurons establish layer-specific projections in two separate stages: during the first stage, R7 and R8 axons sequentially target to the R7- and R8-temporary layers, respectively; and at the second stage, R7 and R8 growth cones progress synchronously to their destined layers. Using a set of mutations that delete different afferent subsets or alter R7 connectivity, we defined the mechanism of layer selection. We observed that R8, R7 and L1-L5 afferents target to their temporary layers independently, suggesting that afferent-target, but not afferent-afferent, interactions dictate the targeting specificity. N-cadherin is required in the first stage for R7 growth cones to reach and remain in the R7-temporary layer. The Ncad gene contains three pairs of alternatively spliced exons and encodes 12 isoforms. However, expressing a single Ncad isoform in Ncad mutant R7s is sufficient to rescue mistargeting phenotypes. Furthermore, Ncad isoforms mediate promiscuous heterophilic interactions in an in vitro cell-aggregation assay. We propose that Ncad isoforms do not form an adhesion code; rather, they provide permissive adhesion between R7 growth cones and their temporary targets.

Alternative Splicing↗
PubMed2001

The boundary layer of swimming fish.

Tangential and normal velocity profiles of the boundary layer surrounding live swimming fish were determined by digital particle tracking velocimetry, DPTV. Two species were examined: the scup Stenotomus chrysops, a carangiform swimmer, and the smooth dogfish Mustelus canis, an anguilliform swimmer. Measurements were taken at several locations over the surfaces of the fish and throughout complete undulatory cycles of their propulsive motions. The Reynolds number based on length, Re, ranged from 3x10(3) to 3x10(5). In general, boundary layer profiles were found to match known laminar and turbulent profiles including those of Blasius, Falkner and Skan and the law of the wall. In still water, boundary layer profile shape always suggested laminar flow. In flowing water, boundary layer profile shape suggested laminar flow at lower Reynolds numbers and turbulent flow at the highest Reynolds numbers. In some cases, oscillation between laminar and turbulent profile shapes with body phase was observed. Local friction coefficients, boundary layer thickness and fluid velocities at the edge of the boundary layer were suggestive of local oscillatory and mean streamwise acceleration of the boundary layer. The behavior of these variables differed significantly in the boundary layer over a rigid fish. Total skin friction was determined. Swimming fish were found to experience greater friction drag than the same fish stretched straight in the flow. Nevertheless, the power necessary to overcome friction drag was determined to be within previous experimentally measured power outputs. No separation of the boundary layer was observed around swimming fish, suggesting negligible form drag. Inflected boundary layers, suggestive of incipient separation, were observed sporadically, but appeared to be stabilized at later phases of the undulatory cycle. These phenomena may be evidence of hydrodynamic sensing and response towards the optimization of swimming performance.

Animals↗
PubMed1989

[Changes in temperature and humidity at different layers inside clothing during rest, exercise, and recovery].

This paper presents the results of experiments in which we measured humidity and temperature changes that took place in different layers inside and on clothing. The experiments were conducted during rest, exercise, and recovery. During each experiment, subjects wore one of three kinds of outerwear made of three different materials, respectively. These materials were nylon taffeta (N), nylon taffeta-Goretex-nylon tricot laminated fabric (G), and polyvinylchloride-coated plain cotton fabric (V). The subjects wore an undershirt and a T-shirt under the outerwear. The humidity and the temperature were measured in the following parts of each subjects' back: (1) the layer between the subject's skin and the undershirt (first layer), (2) the layer between the undershirt and the T-shirt (second layer), (3) the layer between the T-shirt and the outerwear (third layer), and (4) the surface of the outerwear (fourth layer). We also measured the sensation of comfort, the skin temperature, the oral temperature and the degree of sweating of the subjects. The experiments were conducted in a climatic chamber under conditions of 20.7 +/- 0.4 degrees C, 61.2 +/- 3.6% RH and 2.5 +/- 0.5 cm/sec. The results we obtained were as follows: 1) While the subjects kept still, little change of humidity was observed with time in all the four layers. When the subjects were in motion, humidity increased as they started sweating. After the exercise ended, the humidity reached its maximum and then gradually decreased. 2) When subjects kept still, there was no difference in humidity in all the four layers of the outerwear.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗
PubMed2006

Layer-specific touch-dependent facilitation and depression in the somatosensory cortex during active whisking.

Brains adapt to new situations by retuning their neurons. The most common form of neuronal adaptation, typically observed with repetitive stimulations of passive sensory organs, is depression (responses gradually decrease until stabilized). We studied cortical adaptation when stimuli are acquired by active movements of the sensory organ. In anesthetized rats, artificial whisking was induced at 5 Hz, and activity of individual neurons in layers 2-5 was recorded during whisking in air (Whisking condition) and whisking against an object (Touch condition). Response strengths were assessed by spike counts. Input-layer responses (layers 4 and 5a) usually facilitated during the whisking train, whereas superficial responses (layer 2/3) usually depressed. In layers 2/3 and 4, but not 5a, responses were usually stronger during touch trials than during whisking in air. Facilitations were specific to the protraction phase; during retraction, responses depressed in all layers and conditions. These dynamic processes were accompanied by a slow positive wave of activity progressing from superficial to deeper layers and lasting for approximately 1 s, during the transient phase of response. Our results indicate that, in the cortex, adaptation does not depend only on the level of activity or the frequency of its repetition but rather on the nature of the sensory information that is conveyed by that activity and on the processing layer. The input and laminar specificities observed here are consistent with the hypothesis that the paralemniscal layer 5a is involved in the processing of whisker motion, whereas the lemniscal barrels in layer 4 are involved in the processing of object identity.

Action Potentials↗
PubMed1984

The development of the inner layer of backfat in fetal and young pigs.

The development of the innermost layer of backfat was studied histologically and histochemically in fetuses from Yorkshire sows at 45, 60, 65, 75, 85, 90, 105, 110, and 112 d of gestation. Samples were also obtained from fetuses at 110 d of gestation from Ossabaw sows and from sows selected for high (obese) or low (lead) backfat thickness. Fetuses from some sows were decapitated at 45 d of gestation and samples were obtained from these fetuses at 110 d of gestation. The inner layer develops before 75 d of gestation and has stromal-vascular characteristics that clearly distinguish it from the middle layer of backfat. For instance, a well organized and dense collagen matrix immediately surrounds small fat cell clusters in the inner layer. Most fat cell cluster capillaries (in the inner layer) reacted strongly for ATPase histochemically and are histologically immature. The inner layer morphology and cell size was similar in Ossabaw, obese and lean fetuses. The number of PAS (Periodic Acid Schiff) positive cells were dependent on fetal strain. The number was highest in obese fetuses and lowest in Ossabaws. Comparison of decapitated fetuses and weight-matched controls indicated that the inner layer was most affected by decapitation. A decreased organization and amount of collagen was associated with larger fat cell clusters in decapitated fetuses, and most fat cell cluster capillaries reacted little for ATPase histochemically and were histologically mature. The range in inner-layer fat cell diameter was wider in decapitated fetuses (11 to 55 micron) than in control fetuses (11 to 30 micron). These results demonstrate that the characteristics of the inner layer are clearly different from the other layers and that the amount and organization of collagen was inversely associated with the size of fat cell clusters and fat cells and with the maturity of the adipocyte-associated capillaries.

Adipose Tissue↗
PubMed1998

Effect of impression material on surface reactive layer when casting pure titanium in phosphate investment.

We evaluated the effect of impression materials used in preparation of pure titanium castings on the surface reactive layer. Surface roughness of the refractory models before and after firing was smaller when silicone rather than agar impression material was used. The surface roughness of castings prepared with T-invest varied little with the impression material. However, the surface roughness of the castings prepared with CD Titaninvest was less when silicone impression material was used. Surface hardness of the castings was slightly greater when agar impression material was used, and metallic texture analysis of the surface of the castings showed a chill layer and a columnar crystal layer extending from the surface toward the interior. A relatively non-corroded white layer and a markedly corroded black layer were observed in the chill layer, and their thickness was smaller when silicone impression material was used. Use of the Electron Probe Micro Analyzer (EPMA) to determine distribution of various elements in the superficial layer of the casting plates showed that the reactive layer contained less P and Si when silicone impression material was used rather than agar. NH4H2 PO4, which is a component of the bonding material in the investment, was present at a high concentration in the superficial layer of the agar impression material. This shows the importance of preparing refractory models with a non-water-absorbing impression material to obtain pure titanium casting plates with a smaller reactive layer.

Agar↗
PubMedDate not supplied

Applying a uniform layer of disinfectant by wiping.

Disinfection or sterilization often requires applying a film of liquid to a surface, frequently done by using a wiper as the applicator. The wiper must not only hold a convenient amount of liquid, it must deposit it readily and uniformly. Contact time is critical to disinfection efficacy. Evaporation can limit the contact time. To lengthen the contact time, thickly applied layers are generally preferred. The thickness of such layers can be determined by using dyes or other tracers, as long as the tracers do not significantly affect the liquid's surface tension and viscosity and thus do not affect the thickness of the applied layer. Alternatively, as done here, the thickness of the layer can be inferred from the weight loss of the wiper. Results are reported of experiments on thickness of the layers applied under various conditions. Near saturation, hydrophilic polyurethane foam wipers gave layers roughly 10 microns thick, somewhat less than expected from hydrodynamic theory, but more than knitted polyester or woven cotton. Wipers with large liquid holding capacity, refilled often, should produce more nearly uniform layers. Higher pressures increase saturation in the wiper, tending to thicken the layer, but higher pressures also force liquid from the interface, tending to thin the layer, so the net result could be thicker or thinner layers, and there is likely to be an optimal pressure.

Disinfectants↗
PubMed2001

Disruption of layers 3 and 4 during development results in altered thalamocortical projections in ferret somatosensory cortex.

The precision of projections from dorsal thalamus to neocortex are key toward understanding overall cortical organization and function. To identify the significance of layer 4 cells in receiving the bulk of thalamic projections in somatosensory cortex, we disrupted layer 4 genesis and studied the effect on thalamic terminations in ferrets. Second, we ascertained the result of layer 4 disruption on functional responses and topographic organization. Methylazoxy methanol (MAM) was injected into pregnant ferrets on embryonic day 33 (E33), when most layer 4 neurons of somatosensory cortex are generated. This treatment resulted in dramatic reduction in the thickness of targeted layer 4. E38 MAM treatment was used as a control, when layer 2-3 neurons are generated. The projections of ventrobasal thalamus into somatosensory cortex were studied using DiI injections. We found only subtle differences between groups (normal, E33, or E38 MAM-treated) in the thalamic afferent pattern on postnatal day 1 (P1) and P7. On P14, thalamic terminations distribute almost equally throughout the remaining cortical layers in the E33 MAM-treated group compared with normal and E38 MAM-treated animals, in which the ventrobasal thalamus projects primarily to central layers. Electrophysiological recordings conducted on mature ferrets treated with MAM on E33 demonstrated that somatotopic organization and receptive field size are normal. These findings emphasize the importance of layer 4 in determining the normal laminar pattern of thalamic termination and suggest that, although its absence is likely to impact on complex neocortical functional responses, topographic organization does not arise from the influence of layer 4.

Animals↗
PubMed1992

Measurement of retinal nerve fiber layer thickness and its functional correlations with the visual field.

We have developed a technique for stereophotogrammetric measurements of retinal nerve fiber layer thickness at the disc margin. This technique has a reproducibility ranging from 3.9% to 6.0% in normal, ocular hypertensive and high pressure open angle glaucomatous eyes. The presence of a halo or scleral crescent had no effect on the reproducibility of the measurements. The measurements have shown that ocular hypertensive eyes have about an 18% decrease of retinal nerve fiber layer thickness compared to normals. High pressure open angle glaucomatous eyes have about a 43% decrease in retinal nerve fiber layer thickness compared to normals. This technique allows the development of maps of retinal nerve fiber layer thickness so that localized changes at the disc margin can be detected. The thinnest nerve fiber layer occurs primarily in the temporal segment. This technique has also correlated measurements of nerve fiber layer thickness with other measurements of the optic disc, particularly showing a significant correlation with area of pallor as well as measurements of the width of optic disc cup at about halfway between surface and the bottom of the cup. A significant correlation with visual field loss has been shown in high pressure open angle glaucomatous eyes, primarily with the temporal quadrant of the retinal nerve fiber layer and the nasal visual field. The rate of the visual field change in primary open angle glaucoma has been correlated with the initial nerve fiber layer thickness, with the greater the retinal nerve fiber layer thickness the greater the rate of the visual field loss during follow-up. These findings suggest that retinal nerve fiber layer thickness discriminates between normal, ocular hypertensive eyes as well as those with open angle glaucomas and may be useful in following patients with open angle glaucoma prior to development of the visual field loss.

Glaucoma, Open-Angle↗
PubMed2005

Effects of one versus two-layer applications of a self-etching adhesive to dentin of primary teeth: a SEM study.

Resin composite is increasingly the material of choice for the restoration of primary teeth, and new materials with simplified procedures are increasingly being offered. Self-etching primers have been developed to simplify the bonding procedures. Some manufacturers recommend the application of these materials in two layers. However little is known about the application times. Therefore, this study evaluated the quality of the interfacial seal and the micromorphology of the hybrid layer in composite restorations bonded with one or two layer applications of a self-etching adhesive to the dentin of the primary teeth. The superfacial dentin (within 1-2 mm of dentinoenamel junction (DEJ)) on the occlusal surfaces of fourteen primary molars was exposed by a flat cut perpendicular to the long axis of the tooth. The occlusal surfaces were divided into two halves by a 1 mm deep groove in the labial-lingual orientation. The teeth were randomly divided into two groups: Group 1: Single Bond (control group) was applied according to the manufacturer's instructions on one half of the surface. On the other half of the same tooth, one layer of Prompt-L-Pop (experimental group) was applied according to the manufacturer's instructions. Group 2: the teeth received the same bonding regimes as group 1, but the experimental group had two layer application of Prompt-L-Pop. All samples were analyzed in SEM. Student's t-test was used to compare the width of the gap and hybrid layer thickness generated by experimental groups and control. There was a statistically significant difference between control (Single Bond) and the experimental groups (one or two layer application of Prompt-L-Pop) (p<0.05). Single Bond showed the best results. Two layer application of Prompt-L-Pop showed better sealing ability than one layer application of it (p<0.05). Only Single Bond presented a visible hybrid layer that had an average thickness of 3.7microm.

Bisphenol A-Glycidyl Methacrylate↗
PubMed1987

The coordination of contractions of circular and longitudinal muscle layers of rat uterus in late pregnancy and during delivery.

Although it is well known that, in visceral smooth muscle, gap junctions between muscle fibers of the same muscle layer are responsible for synchronized strong contractions, much less attention has been paid to the interaction of muscle layers. An L-shaped preparation of the myometrium composed of circular and longitudinal muscle layers was adapted to study the relationship between the activities of these two muscle layers of pregnant rats. After careful separation, each of the two arms of the preparation would consist of only one muscle layer, while both layers remained connected at the angle of the L. Thus, contractions of both muscle layers could be monitored simultaneously and their relationship could be investigated. It was found that coordination of the contractions of longitudinal and circular muscles appeared in the morning of gestation day 21 and continued toward delivery. The coordination was expressed as a special sequence of the contractions of the two muscle layers which occurred repetitively for an hour or longer. In most of the cases, pacemaker was located in the longitudinal layer. Dissociation of one of the arms would make both arms contract independently. A few specimens from animals in their early third trimester also showed interaction of the muscle layers. Nevertheless, the correlation was not as strong as that in specimens prepared from animals close to term.

Animals↗
PubMed1984

Patterns of synaptic input to layer 4 of cat striate cortex.

Although cells in layer 4 of cat striate cortex represent the first stage in the cortical processing of visual information, they have considerably more complicated receptive field properties than the afferents to the layer from the lateral geniculate nucleus. In considering how these properties are generated, we have focused on the intrinsic cortical circuitry, and particularly on the projection to layer 4 from layer 6. Layer 6 pyramidal cells were injected with horseradish peroxidase and examined at the light and electron microscopic level. The labeled axon terminals were found to form asymmetric synapses and to show a strong preference for contacting dendritic shafts. Serial reconstruction of dendrites postsynaptic to labeled layer 6 cell axon terminals showed that a large proportion of the postsynaptic dendrites belonged to smooth and sparsely spiny stellate cells, suggesting a selective innervation of these cell types. In contrast, the geniculate projection to layer 4 made synapses primarily with dendritic spines and, as a result, the large majority of terminals ended on spiny cells. Since smooth and sparsely spiny stellate cells are thought to mediate inhibition within the cortex, we suggest that one effect of the layer 6 to layer 4 projection could be to contribute to inhibitory features of the receptive fields of layer 4 cells.

Animals↗