Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal Diffusion”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources

N-acetyl-beta-hexosaminidase B deficiency in cultured fibroblasts from a patient with progressive motor neuron disease.

A patient with a 20-year history of progressive motor neuron disease was previously found to have profoundly low levels of N-acetyl-beta-hexosaminidase (Hex) in serum and leukocytes; Hex activity in cultured skin fibroblasts was in the low normal range. By thermal inactivation and cellulose acetate electrophoresis, the residual activity appeared to be Hex A. In the present study, the residual activity in cultured skin fibroblasts was further characterized as Hex A by thermal inactivation at reduced temperatures and ion exchange chromatography; no evidence was obtained for a diffusible inhibitor of Hex activity. After labeling with [3H]leucine, immunoprecipitation with polyclonal antibody to Hex B, and SDS-polyacrylamide gel electrophoresis, both alpha and beta polypeptide chains were visualized, confirming the presence of Hex A. The results suggest that, in the patient's fibroblasts, a defect in beta-chain synthesis or processing precludes the self-association of beta-chains to form Hex B, but does not prevent the association of alpha- and beta-chains to form Hex A.

Cells, Cultured↗

The effect of erbium on the adsorption and photodegradation of orange I in aqueous Er3+-TiO2 suspension.

Pure TiO(2) and erbium ion-doped TiO(2) (Er(3+)-TiO(2)) catalysts prepared by the sol-gel method were characterized by means of XRD and diffusive reflectance spectra (DRS). The XRD results showed that erbium ion doping could enhance the thermal stability of TiO(2) and inhibit the increase of the crystallite size, and the DRS results showed that the optical absorption edge slightly shifted to red direction owing to erbium ion doping and the Er(3+)-TiO(2) catalysts had three typical absorption peaks located at 490, 523 and 654 nm owing to the transition of 4f electron from (4)I(15/2) to (4)F(7/2), (2)H(11/2) and (4)F(9/2). With a purpose of azo dyes degradation, orange I was used as a model chemical. And the adsorption isotherm, degradation and mineralization of orange I were investigated in aqueous suspension of pure TiO(2) or Er(3+)-TiO(2) catalysts. The results showed that Er(3+)-TiO(2) catalysts had higher adsorption equilibrium constants and better adsorption capacity than pure TiO(2). The adsorption equilibrium constants (K(a)) of Er(3+)-TiO(2) catalysts were about twice of that of pure TiO(2). The maximum adsorption capacity (Q(max)) of 2.0% Er(3+)-TiO(2) catalyst was 13.08x10(-5)mol/g, which was much higher than that of pure TiO(2) with 9.03x10(-5)mol/g. Among Er(3+)-TiO(2) catalysts, 2.0% Er(3+)-TiO(2) catalyst achieved the highest Q(max) and K(a) values. The kinetics of the orange I degradation using different Er(3+)-TiO(2) catalysts were also studied. The results demonstrated that the degradation and mineralization of orange I under both UV radiation and visible light were more efficient with Er(3+)-TiO(2) catalyst than with pure TiO(2), and an optimal dosage of erbium ion at 1.5% achieved the highest degradation rate. The higher photoactivity under visible light might be attributable to the transitions of 4f electrons of Er(3+) and red shifts of the optical absorption edge of TiO(2) by erbium ion doping.

Adsorption↗

Synthesis, physicochemical and pharmacokinetic characterization of calcium uronates.

Four calcium compounds containing uronic acids (D(+)-galacturonic and D(+)-glucuronic) in L:M ratio = 2 and 3 were isolated by applying novel (except for one complex) synthetic procedures. The compounds were characterized by elemental analysis, spectroscopic methods (diffuse reflectance and absorption UV-visible, IR, FIR), mass spectrometry, fast atom bombardment (FAB), thermal decomposition, thermogravimetry/derivative thermogravimetry (TG/DTG) data and differential scanning calorimetric studies (DSC). Two modes of water binding in the complexes, i.e., hydration and coordination-like, were established. Computer-aided analysis has shown that further investigations are needed in order to determine the applicability of calcium uronates as calcium carriers.

Calcium↗

Invasive nosocomial pulmonary aspergillosis: risk factors and hospital building works.

A retrospective epidemiological study of 22 observations of invasive pulmonary aspergillosis, of which 18 were fatal, occurring over a period of 30 months, implicated certain building sites within the hospital. The building works were responsible for the diffusion into the atmosphere of fungal spores from normally closed reservoirs, notably false ceilings, fibrous thermal and/or acoustic insulation materials and roller-blind casings. The results of our study permit us to suggest that protective measures should be set up or that immunodepressed patients are evacuated when such works are to be carried out in an in-patient establishment.

Adolescent↗

Unique pore selectivity for Cs+ and exceptionally high NH4+ exchange capacity of the chalcogenide material K6Sn[Zn4Sn4S17].

Highly selective ion-exchange properties and -exchange capacities of the open framework chalcogenide material K(6)Sn[Zn(4)Sn(4)S(17)] (1) with Cs(+) and NH(4)(+) are reported. Because the structure of this framework is known in great detail, these studies are a rare example where structure/property relationships can be directly drawn. 1 possesses three types of micropore cavities. The largest pore of 1 presents an exact fit for Cs(+) and exhibits high selectivity for this ion, as demonstrated by competitive ion-exchange experiments. The next largest pore has a greater capacity (up to four cations) and is well suited for NH(4)(+) ions. This leads to a high ammonium-exchange capacity for 1 of 3.06 mequiv/gr, which is close to the NH(4)(+)-exchange capacities of natural zeolites. The single-crystal structures of ammonium-exchanged products at various stages reveal an unusual mechanism for the exchange process of 1 which involves diffusion of ammonium cations from the large cavity to the small ones of the framework. Thermal analysis of one of these ammonium-exchanged products, in combination with mass spectroscopy, showed the decomposition of NH(4)(+) cations to NH(3) and H(2)S with the parallel transformation of the exchanged product to a mixture of crystalline phases. Since K(6)Sn[Zn(4)Sn(4)S(17)] can be grown in suitably large crystals (much larger than most zeolites), it defines an excellent model system in which ion-exchange processes and products can be characterized and studied in detail in various reaction stages.

Journal Article↗

The behaviour of Sal'nikov's reaction, P --> A --> B, in a spherical batch reactor with the diffusion of heat and matter.

The behaviour of a simple chemical reaction, occurring with the release of heat in a closed batch reactor, is considered for the situation when matter and heat are transported only by diffusive processes; thus, the reacting fluid has negligible velocity, so that heat transfer is by thermal conduction. The reaction is Sal'nikov's, which consists of two, consecutive first-order steps, producing a product B, from a precursor P, via an active intermediate A, in P --> A --> B. The first of these steps is assumed to be thermoneutral, with zero activation energy, whilst the second is exothermic, with an appreciable activation energy. These features make Sal'nikov's reaction the simplest to display thermokinetic oscillations that characterise many, more complex schemes, e.g. cool flames in hydrocarbon combustion. This study involves identifying the regions of parameter space, in which these oscillations in the temperature and the concentration of the intermediate A occur, by means of numerical simulation. These regions are compared with previous analytical stability analyses in one-dimensional systems. It was found that oscillations occur over a much larger range of conditions in the case considered here, i.e. a reactor with spherical symmetry, than in the simple 1-D case, previously studied by Gray and Scott (P. Gray and S. K. Scott, Chemical Oscillations and Instabilities, Clarendon Press, Oxford, 1990, pp. 264-291). In addition, approximate analytical solutions for the temperature and concentration of A are presented for two limiting cases of non-oscillatory behaviour. These analytical solutions have been verified by comparison with full numerical solutions of the governing equations.

Chemical Phenomena↗

A thermal analogy for modelling drug elution from cardiovascular stents.

Restriction of blood flow by the narrowing or occlusion of arteries is one of the most common presentations of cardiovascular disease. One treatment involves the introduction of a metal scaffold, or stent, designed to prevent recoil and to provide structural stability to the vessel. On the occasions that this treatment is ineffective, failure is usually associated with re-invasion of tissue. This can be prevented by local delivery of drugs which inhibit tissue growth. The drug might be delivered locally in a polymer coating on the stent. This paper develops and explores the use of a thermal analogue of the drug delivery process and the associated three-dimensional convection-diffusion equation to model the spatial and temporal distribution of drug concentration within the vessel wall. This allows the routine use of commercial finite element analysis software to investigate the dynamics of drug distribution, assist in the understanding of the treatment process and develop improved delivery systems. Two applications illustrate how the model might be used to investigate the effects of controllable or measurable parameters on the progression of the process. It is demonstrated that the geometric characteristics of the stent can have significant impact on the homogeneity of the dosing in the vessel wall.

Animals↗

Conformal map modeling of the pinning transition in Laplacian growth.

In Laplacian growth processes pinning may be expected due to a nonlinear response of a material during dielectric breakdown, or due to stick-slip boundary conditions in two-fluid flow in a porous medium, while thermal noise will lead to depinning. Using a method recently proposed by Hastings and Levitov, the size R(max) approximately E(-alpha)(c) of the pinned pattern is shown to scale with the critical field E(c) (electric field for dielectric breakdown, pressure gradient for fluid flow). These pinned patterns have a lower effective fractal dimension d(f) than diffusion-limited aggregation due to the enhancement of growth at the hot tips of the developing pattern. At finite temperature, thermal noise leads to depinning and growth of patterns with a shape and dimensionality dependent on both E(c) and the thermal noise. Using multifractal analysis, scaling expressions are established for this dependency.

Journal Article↗

Vibrational ratchets.

Transport in one-dimensional symmetric devices can be activated by the combination of thermal noise and a biharmonic drive. For the study case of an overdamped Brownian particle diffusing on a periodic one-dimensional substrate, we distinguish two apparently different biharmonic regimes: (i) Harmonic mixing, where the two drive frequencies are commensurate and of the order of some intrinsic relaxation rate. Earlier predictions based on perturbation expansions seem inadequate to interpret our simulation results; (ii) Vibrational mixing, where one harmonic drive component is characterized by high frequency but finite amplitude-to-frequency ratio. Its effect on the device response to either a static or a low-frequency additional input signal is accurately reproduced by rescaling each spatial Fourier component of the substrate potential, separately. Contrary to common wisdom, based on the linear response theory, we show that extremely high-frequency modulations can indeed influence the response of slowly (or dc) operated devices, with potential applications in sensor technology and cellular physiology. Finally, the mixing of two high-frequency beating signal is also investigated both numerically and analytically.

Journal Article↗

Diffusion and mixing in gravity-driven dense granular flows.

We study the transport properties of particles draining from a silo using imaging and direct particle tracking. The particle displacements show a universal transition from superdiffusion to normal diffusion, as a function of the distance fallen, independent of the flow speed. In the superdiffusive (but sub-ballistic) regime, which occurs before a particle falls through its diameter, the displacements have fat-tailed and anisotropic distributions. In the diffusive regime, we observe very slow cage breaking and Péclet numbers of order 100, contrary to the only previous microscopic model (based on diffusing voids). Overall, our experiments show that diffusion and mixing are dominated by geometry, consistent with long-lasting contacts but not thermal collisions, as in normal fluids.

Journal Article↗

Intracellular and extracellular components as bacterial thermometers, and early warning against thermal stress.

Responses induced by cold or heat are triggered following detection of temperature changes by specific sensing molecules, complexes or structures. Low temperature responses are often induced following sensing of cold-induced falls in membrane fluidity, such changes turning-on or -off enzymic activities in membrane proteins, although ribosomes and DNA may also function in cold perception. Many thermal sensors are components of structures damaged by the heat, with sensing involving changes to ribosomes, DNA, intracellular proteins and, less commonly, membrane fluidity. Additionally, secreted proteins (extracellular sensing components, ESCs) detect temperature increases i.e. act as thermometers, with ESC activation in the medium, by the stimulus, converting such sensors to extracellular signalling molecules, the extracellular induction components (EICs), which induce thermal responses. Several ESC/EIC pairs trigger thermal responses, and have the unique property of giving early warning of the stress by diffusing to regions (and organisms) not yet exposed to elevated temperatures.

Bacteria↗

Injury-induced functional plasticity in the peripheral gustatory system.

Combining unilateral denervation of anterior tongue taste buds with a low-sodium diet in rats results in a rapid, dramatic, and selective attenuation of neurophysiological sodium taste responses from the intact side of the tongue. The transduction pathway responsible for the attenuated response is through the epithelial sodium channel (Hill and Phillips, 1994). Current experiments extend these findings by detailing the effects of experimentally induced injury on taste responses from anterior tongue taste receptors in sodium-restricted rats. Experiments focused on functional salt taste responses from the intact chorda tympani nerve in sodium-restricted rats in which a gustatory nerve was sectioned that innervates the anterior tongue (chorda tympani), the posterior tongue (glossopharyngeal), or palatal taste receptors (greater superficial petrosal) or in which a nongustatory nerve was sectioned that also has its target in the anterior tongue (trigeminal). An additional group was studied that received thermal injury to the anteroventral tongue. Substantial and selective suppression of sodium salt responses occurred in a graded manner generally related to the distance from the target field of the injury to anterior tongue taste buds. The order of effectiveness was: chorda tympani section > trigeminal section > thermal injury = glossopharyngeal section > greater superficial petrosal section. These results support the hypothesis that local, diffusible factors liberated from immune-derived cells as a result of neural and/or epithelial damage are involved in regulating the transduction pathway responsible for sodium salt sensation, and that these factors may become evident through dietary sodium restriction.

Animals↗

[Influence of the temperature regimen of sanitation of the abdominal cavity on the course of the syndrome of post-sanitation intoxication in patients with acute diffuse peritonitis].

The aim of the investigation was to work out and study effectiveness of the method of sanitation of the abdominal cavity in patients with acute diffuse peritonitis based on a combination of using the properties of hypo- and hyper-thermal solutions. The complex of experimental investigations has proved the safe clinical use of the proposed method to be possible, discovered main pathogenetic mechanisms of a positive influence of heterothermy when performing sanitation of the abdominal cavity against the background of acute peritonitis. The results of clinical approbation of the method in 86 patients have shown sufficiently high efficiency of using sanitation of the abdominal cavity in heterothermal regimen in a complex of measures for treatment of patients with acute peritonitis that allowed getting reliably lower degree of post-sanitation intoxication, less number of complications and lethal outcomes.

Abdominal Cavity↗

[Qualitative studies on the surface crystallization of dental glass ceramics (Dicor)].

The crystallization of enstatite at the surface of Dicor glass during 'ceramization' is proved by electron microscopy and x-ray diffraction. Microprobe measurements demonstrate a loss of potassium and an uptake of calcium in the outer region of the glass-ceramic after ceramization due to an ion exchange between glass and ceramization investment. This investment consists of gypsum and leucite. A thermal analysis reveals the decomposition of gypsum in the range of the ceramization temperature. Calcium diffuses into the surface of the glass while simultaneously potassium leaves the glass. The altered composition allows the crystallization of enstatite.

Ceramics↗

Water and heat transport in hilly red soil of southern China: II. Modeling and simulation.

Simulation models of heat and water transport have not been rigorously tested for the red soils of southern China. Based on the theory of nonisothermal water-heat coupled transfer, a simulation model, programmed in Visual Basic 6.0, was developed to predict the coupled transfer of water and heat in hilly red soil. A series of soil column experiments for soil water and heat transfer, including soil columns with closed and evaporating top end, were used to test the simulation model. Results showed that in the closed columns, the temporal and spatial distribution of moisture and heat could be very well predicted by the model, while in the evaporating columns, the simulated soil water contents were somewhat different from the observed ones. In the heat flow equation from Taylor and Lary (1964), the effects of soil water evaporation on the heat flow is not involved, which may be the main reason for the differences between simulated and observed results. The predicted temperatures were not in agreement with the observed one with thermal conductivities calculated by de Vries and Wierenga equations, so that it is suggested that K(h), soil heat conductivity, be multiplied by 8.0 for the first 6.5 h and by 1.2 later on. Sensitivity analysis of soil water and heat coefficients showed that the saturated hydraulic conductivity, K(S), and the water diffusivity, D(theta), had great effects on soil water transport; the variation of soil porosity led to the difference of soil thermal properties, and accordingly changed temperature redistribution, which would affect water redistribution.

Journal Article↗

Modeling of diffusion with partitioning in stratum corneum using a finite element model.

Partitioning and diffusion of chemicals in skin is of interest to researchers in areas such as transdermal penetration and drug disposition, either for risk assessment or transdermal delivery. In this study a finite element method is used to model diffusion in the skin's outermost layer, the stratum corneum (SC). The SC is considered to be a finite two-dimensional composite having different diffusivity values in each medium as well as a partition coefficient at the interfaces between media. A commercial finite element package with thermal analysis capabilities is selected due to the flexibility of this software to handle irregular geometries. Partitioning is accommodated through a change of variables technique. This technique is validated by comparison of model results with analytical solutions of steady-state flux, transient concentration profiles, and time lag for diffusion in laminates. Two applications are presented. Diffusion is solved in a two-dimensional "brick and mortar" geometry that is a simplification of human stratum corneum, with a partition coefficient between corneocyte and lipid. Results are compared to the diffusion in multiple laminates to examine effects of the partition coefficient. The second application is the modeling of diffusion with partitioning through an irregular geometry which is obtained from a micrograph of hairless mouse stratum corneum.

Administration, Cutaneous↗

Diffusion in curved fluid membranes.

We analyze theoretically the effects of curvature on the diffusion in a fluid membrane, within the Saffman-Delbrück hydrodynamic model. We calculate the effect of curvature on the intrinsic fluidity of a membrane through changes in its thickness, for both static or fluctuating curvature. We treat both thermal curvature fluctuations, and fluctuations due to active processes. Such curvature fluctuations increase the average membrane thickness and diminish the projected area, thereby decreasing the diffusion coefficient. This calculation allows us to predict the effect of shear flow on the membrane diffusion, and to compare to observations on living cells.

Computer Simulation↗

Diffuse noxious inhibitory controls (DNIC) involve trigeminothalamic and spinothalamic neurones in the rat.

Fifty-eight lumbar dorsal horn and trigeminal nucleus caudalis neurones which could be activated by both innocuous and noxious peripheral stimuli have been recorded in the anaesthetized rat. Using transcutaneous electrical stimulation to produce A and C fibre activity in these neurones from the hindpaw or facial receptive fields the ability of a distant noxious (mechanical or thermal) stimulus applied to the nose, tail, ears and paws to inhibit the neuronal activity was demonstrated. These effects have been termed diffuse noxious inhibitory controls (DNIC). DNIC produced powerful long-lasting inhibitions on all units studied in accordance with our previous results. Approximately 40% of these convergent neurones could be antidromically activated from the contralateral ventrobasal thalamus. Similar neuronal characteristics, effects of DNIC and proportions of projection cells were found in both the dorsal horn and trigeminal complex. However, the spinothalamic tract cells conducted more rapidly than the trigeminothalamic neurones. These results indicate that DNIC can produce comparable effects on the thalamic representation of the efferent activity of these spinal cord and trigeminal neurones. The possible role of DNIC in nociception is discussed.

Animals↗