Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Caproates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
PubMedDate not supplied

Ring-opening bulk polymerization of epsilon-caprolactone and trimethylene carbonate catalyzed by lipase Novozym 435.

The affects of lipase concentration on ring-opening bulk polymerizations of epsilon-caprolactone and trimethylene carbonate were studied by using Novozym 435 (immobilized form of lipase B from Candida antarctica) as biocatalyst. The polymerization of epsilon-caprolactone was carried out in bulk at 70 degrees C. Three lipase concentrations of 9.77, 1.80 and 0.50 mg/mmol epsilon-CL were used in the experiment. The results showed that increasing the lipase concentration used in the polymerization system resulted in an increased rate of monomer consumption. For an enzyme concentration of 9.8 mg lipase per mmol monomer, an 80% monomer conversion was achieved in a 4-h time period, while for the lower enzyme concentration of 1.8 mg lipase per mmol monomer, 48 h were needed to reach monomer conversion. Linear relationships between Mn and monomer conversions were observed in all three enzyme concentrations, suggesting that the product molecular weight may be controlled by the stoichiometry of the reactants for these systems. At the same monomer conversion level, however, Mn decreased with increasing enzyme concentration. After correcting for the amount of monomer consumed in initiation, the plot of ln[([M]o - [M]i)/([Mt] - [M]i)] versus reaction time was found to be linear, suggesting that the monomer consumption followed a first-order rate law and no chain termination occurred. For the TMC systems, the polymerization was carried out in bulk at 55 degrees C. Similar to the epsilon-CL systems, increasing the Novozym 435 concentration from 8.3 to 23.6 mg/mmol TMC increased the rate of monomer conversion. Unlike the epsilon-CL systems, however, nonlinear relationships were obtained between Mn and monomer conversion, indicating that possible chain transfer and/or slow initiation had taken place in these systems. Consistent with the above result, nonlinear behavior was observed for the plot of ln[[M]o/[M]t] versus reaction time.

Candida↗
PubMed1999

Characterization by mass spectrometry of poly(3-hydroxyalkanoates) produced by Rhodospirillum rubrum from 3-hydroxyacids.

The sequence distributions of two microbial copolyesters obtained by fermentation of Rhodospirillum rubrum, grown with 3-hydroxyhexanoic or 3-hydroxyheptanoic acids, were determined by analyzing the oligomers prepared by partial pyrolysis or partial methanolysis of these copolyesters using fast atom bombardment mass spectrometry (FAB-MS). Oligomers up to pentamers were identified in the case of partial pyrolysis and up to tetradecamers in the case of partial methanolysis. The comparison between the experimental and calculated peak intensities of FAB mass spectra allows the calculation of compositions and sequence distributions, which in these copolyesters follow Bernoullian statistics, indicating that they are random terpolyesters.

Biopolymers↗
PubMed2000

Poly(D,L-lactide/epsilon-caprolactone)/hydroxyapatite composites.

In this study, elastomeric D,L-lactide and epsilon-caprolactone copolymers with two different molecular weights (Mn: 108.000 and 40.000) were synthesized by ring-opening polymerization of the respective dimers by using stannous octoate as the catalyst, as a potential bone-filling material. The final ratio of D,L-lactide to epsilon-caprolactone obtained by 1NMR was 60/40 (comparing to the initial ratio of 50/50). Both copolymers were amorphous having Tg at around -21 degrees C. Different amounts of hydroxyapatite (HA) powder were loaded within the copolymers. These composites were easily shaped by hand. Mechanical properties of the composites changed with the HA loading and the molecular weight of the copolymer. The percent elongation decreased, while both the Young's modulus and yield point (stress) increased with the HA content. The copolymers were degraded within the Ringer solutions in about 6 weeks. The molecular weight distribution became broader during degradation. Incorporation of HA reduced the degradation rate.

Biodegradation, Environmental↗
PubMed2001

Preparation of porous composite implant materials by in situ polymerization of porous apatite containing epsilon-caprolactone or methyl methacrylate.

Biodegradable and biostable composite foams were formed from porous apatite cement infiltrated with epsilon-caprolactone (CL) or methylmethacrylate (MMA) using a high over vacuum. For CL composites in situ polymerization was induced using trace water as an initiator and heating at 120 degrees C for up to 10 days or at 80 degrees C for 60 days. MMA composites were polymerized using AIBN initiator at 70 degrees C for 8 h. CL preparations gave composites with a polycaprolactone (PCL) number average of molecular weight (Mn) up to the maximum of 7.1 x 10(3) g/mol after 10 days and 16.8 x 10(3) g/mol after 60 days. The PCL and PMMA contents were close to 50 and 40 wt%, respectively, polymer was present as a thin coating on the apatite crystal plates and was evenly distributed throughout the samples. Re-evacuation of apatite saturated with monomer during preparation ensured that the upwards of 200 nm microchannels within the apatite cement were largely free of polymer, and the overall macroporous structure of the apatite foams was partly retained. Maximum compressive strengths increased from 9 MPa to 37 and 64 MPa for PCL and PMMA composites, respectively. The water drop contact angle of the PCL composite was 64 degrees, and therefore suitable for cell attachment. PMMA composite surfaces were more hydrophobic. Composites were subjected to corona discharge to induce suitable moderate hydrophilicity at the surface.

Apatites↗
PubMed2002

Influence of polymerization conditions on the hydrolytic degradation of poly(DL-lactide) polymerized in the presence of stannous octoate or zinc-metal.

Laboratory- and pilot-scale racemic polylactides (PLA50) were synthesized in the presence of stannous octoate (SnOct2) or zinc-metal as initiators in the absence of alcohol. The resulting polymers were processed by compression molding or injection molding depending on the batch scale. The hydrolytic degradation of compression-molded samples selected to be comparable was investigated first in order to show the influence of the initiator system. Differences in water uptake were found between PLA50-Zn (zinc-metal initiation) and PLA50-Sn (SnOct2 initiation). PLA50-Zn being much more hydrophilic. PLA50-Sn exhibited a slower molecular weight decrease and delayed onsets of weight loss, release of acidity and stereocomplex formation, with respect to PLA-Zn. The concentration in residual tin in PLA50-Sn increased from 306 to 795 ppm during aging. In the case of PLA50-Zn the residual metal remains constant at ca. 40 ppm. In a second series of experiments, high molecular weight PLA50 different in characteristics and in initiator, synthesized under pilot-scale, were compared. The effects of the initiator on the degradation of the polymers well agreed with laboratory-scale findings, differences in hydrophobicity being enlarged by the up scaling. PLA50-Sn polymers appeared much more degradation resistant than PLA50-Zn ones. Contributions of the other characteristics (e.g. molecular weight, purity, stereoregularity, processing) were shown to be important as well.

Absorption↗
PubMed2002

Tissue ingrowth and degradation of two biodegradable porous polymers with different porosities and pore sizes.

Commonly, spontaneous repair of lesions in the avascular zone of the knee meniscus does not occur. By implanting a porous polymer scaffold in a knee meniscus defect, the lesion is connected with the abundantly vascularized knee capsule and healing can be realized. Ingrowth of fibrovascular tissue and thus healing capacity depended on porosity, pore sizes and compression modulus of the implant. To study the lesion healing potential, two series of porous polyurethanes based on 50/50 epsilon-caprolactone/L-lactide with different porosities and pore sizes were implanted subcutaneously in rats. Also, in vitro degradation of the polymer was evaluated. The porous polymers with the higher porosity, more interconnected macropores, and interconnecting micropores of at least 30 microm showed complete ingrowth of tissue before degradation had started. In implants with the lower macro-porosity and micropores of 10-15 microm degradation of the polymer occurred before ingrowth was completed. Directly after implantation and later during degradation of the polymer, PMN cells infiltrated the implant. In between these phases the foreign body reaction remained restricted to macrophages and giant cells. We can conclude that both foams seemed not suited for implantation in meniscal reconstruction while either full ingrowth of tissue was not realized before polymer degradation started or the compression modulus was too low. Therefore, foams must be developed with a higher compression modulus and more connections with sufficient diameter between the macropores.

Animals↗
PubMed2003

Vancomycin encapsulation in biodegradable poly(epsilon-caprolactone) microparticles for bone implantation. Influence of the formulation process on size, drug loading, in vitro release and cytocompatibility.

Vancomycin encapsulation in biodegradable poly(epsilon-caprolactone) microparticles (200 microm mean diameter) was most efficient with a simple emulsion technique that dispersed 122.5 mg/g of polymer. Scanning electron micrographs showed smooth or pitted particles. Dissolution studies were correlated with microparticle morphology, indicating higher release with pitted particles when vancomycin was encapsulated in a dissolved state. The cytocompatibility of these poly(epsilon-caprolactone) microparticles was demonstrated by a direct contact cytotoxic assay. This material can be considered as an efficient drug delivery system for bone implantation.

Absorbable Implants↗
PubMed2003

Polyhydroxyalkanoate (PHA) scaffolds with good mechanical properties and biocompatibility.

Blending microbial polyesters polyhydroxyalkanoates containing polyhydroxybutyrate (PHB) and poly(hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx) were turned into films and scaffolds. The films made from blending polyesters showed that the elongation to break of the blending PHBHHx/PHB film increased from 15% to 106% when PHBHHx content in the blend increased from 40% to 60%. Scaffolds made of PHBHHx/PHB consisting of 60 wt% PHBHHx showed strong growth and proliferation of chondrocytes on the blending materials under scanning electron microscope. Energy dispersive X-ray analysis of the extra cellular matrix on the scaffolds demonstrated a high level of calcium and phosphorus elements in a molar ratio of Ca/P at 1.66, this is approximately equal to that of natural material hydroxyapatite which has a Ca/P ratio of 1.67. This suggested that the chondrocyte cells grown on PHBHHx/PHB scaffolds presented effective physiological function for generation of cartilage.

3-Hydroxybutyric Acid↗
PubMed2003

Osteoblast growth and function in porous poly epsilon -caprolactone matrices for bone repair: a preliminary study.

Current methods for the replacement of skeletal tissue involve the use of autografts, allografts and, recently, synthetic substitutes, which provide a proper amount of material to repair large bone defects. Engineered bone seems a promising approach, but a number of variables have to be set prior to any clinical application. In this study, four different poly caprolactone-based polymers (PCL) were prepared and tested in vitro using osteoblast-like Saos-2 cells. Differences among three-dimensional polymers include porosity, addition of hydroxyapatite (HA) particles, and treatment with simulated body fluid. Biochemical parameters to assess cell/material interactions include viability, growth, alkaline phosphatase release, and mineralization of osteoblastic cells seeded onto three-dimensional samples, while their morphology was observed using light microscopy and SEM. Preliminary results show that the polymers, though degrading in the medium, have a positive interaction with cells, as they support cell growth and functions. In the short-term culture (3-7 days) of Saos-2 on polymers, little differences were found among PCL samples, with the presence of HA moderately improving the number of cells onto the surfaces. In the long term (3-4 weeks), it was found that the HA-added polymers obtained the best colonization by cells, and more mineral formation was observed after coating with SBF. It can be concluded that PCL is a promising material for three-dimensional scaffold for bone formation, and the presence of bone-like components improves osteoblast activity.

Biocompatible Materials↗
PubMed2003

Poly(hydroxybutyrate-co-hydroxyhexanoate) promoted production of extracellular matrix of articular cartilage chondrocytes in vitro.

The present investigation describes the production of extracellular matrix of rabbit articular cartilage chondrocytes grown on scaffolds of polyhydroxybutyrate (PHB) blended with poly(hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx) for up to 7 days. The mRNA level of type II collagen of chondrocytes seeded on all scaffolds consisting of PHBHHx were obviously higher than that of PHB-only scaffold throughout the culture period, suggesting the positive effect of PHBHHx on extracellular matrix production. Second-harmonic generation (SHG) imaging technique, combined with confocal fluorescence microscopy (CFM) revealed that PHBHHx in PHB scaffold provided better surface properties for anchoring type II collagen filaments and their penetration into internal layers of the scaffolds. Glycosaminoglycan (GAG), a major composition of extracellular matrix, showed a sharp increase in construct of 1:2 PHB/PHBHHx scaffold after 7 day cultivation, while only a small increase was observed in all other tested scaffolds. At the same time, total collagen contents in all scaffolds containing PHBHHx increased with time, with the maximum collagen production of 742.1+/-99.2mg/g dry weight observed in construct of 1:2 PHB/PHBHHx scaffold inoculated for 7 days, this was almost 4-fold higher than that in scaffold of PHB only. It appears that the presence of right proportion of PHBHHx in the composite system of PHB/PHBHHx highly favored the production of extracellular matrix of articular cartilage chondrocytes.

3-Hydroxybutyric Acid↗
PubMed2004

Attachment, proliferation and differentiation of osteoblasts on random biopolyester poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds.

Rabbit bone marrow cells were inoculated on 3D scaffolds of poly(lactic acid) (PLA), poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) to evaluate their in vitro biocompatibilities. It was found that PHBHHx had the best performance on attachment, proliferation of bone marrow cells. The cells on PHBHHx scaffolds presented typical osteoblast phenotypes: round cell shape, high alkaline phosphotase (ALP) activity, strong calcium deposition, and fibrillar collagen synthesis. After incubation for 10 days, cells grown on PHBHHx scaffolds were approximately 2x10(5)ml(-1), 40% more than that on PHB scaffolds and 60% more than that on PLA scaffolds. ALP activity of the cells grown on PHBHHx scaffolds was up to about 65U/g scaffolds, 50% higher than that of PHB and PLA, respectively. The scanning electronic microscopy (SEM) results showed that PHBHHx scaffolds had the appropriate roughness for osteoblast attachment and proliferation comparing with PHB and PLA. All these indicated that PHBHHx was a suitable biomaterial for osteoblast attachment, proliferation and differentiation from bone marrow cells.

3-Hydroxybutyric Acid↗
PubMed2004

Hydrolytic degradation study of biodegradable polyesteramide copolymers based on epsilon-caprolactone and 11-aminoundecanoic acid.

In this paper, a new kind of aliphatic biodegradable polyesteramide copolymers P(CL/AU)x/y based on epsilon-caprolactone and 11-aminoundecanoic acid were synthesized by the melt polycondensation method. Hydrolytic degradation behavior of P(CL/AU) copolymers were studied by using FTIR, 1H-NMR and DSC. Chemical compositions, macromolecular weight, thickness of the test sample, and pH of the degradation medium have great effect on degradation rate. The degradation rate decreased with increase in aminoundecanoic acid content, macromolecular weight, and thickness of the test samples, but increased with incubation temperature and pH of the degradation medium. The degradation mechanism was studied according to the mathematical model developed by professor Göpferich.

Absorbable Implants↗
PubMed2000

Physical and biocompatibility properties of poly-epsilon-caprolactone produced using in situ polymerisation: a novel manufacturing technique for long-fibre composite materials.

Preliminary investigations into a novel process for the production of poly-epsilon-caprolactone (PCL) to be used as a matrix material in a bioabsorbable composite material are detailed. This material is primarily being developed as a bone substitute for use in maxillofacial reconstructive surgery, however, the technique described could be adapted to other areas where bioabsorbable composite materials may be used. The development of a totally bioabsorbable long-fibre composite material would allow a two-stage degradation to occur with the matrix material degrading first leaving a scaffold structure of degradable fibres which would be absorbed at a later stage. Caprolactone monomer was polymerised in situ within a tool cavity to produce a net shape moulding. Inclusion of a fibre preform within the tool cavity which was impregnated by the liquid monomer produces a long-fibre composite material. PCL with a range of molecular weights has been produced using this liquid moulding technique to assess the physical and biocompatibility properties compared to commercially available PCL. Osteoblast-like cells derived from human craniofacial bone (CFC) have been used to assess the in vitro biocompatibility of the PCL. The results show that high-quality PCL with a narrow molecular weight distribution and properties similar to commercially available PCL can be produced using this technique. Polymerisation of the monomer around a woven fibre preform made of a poly(lactic acid) (PLA)/poly(glycolic acid) (PGA) copolymer (vicryl mesh) produced a bioabsorbable long-fibre composite material. Further work is ongoing to develop this system towards a method for improving craniofacial bone reconstruction.

Biocompatible Materials↗