Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “CHROMIUM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,009 records · Page 56Linked to original sources
PubMed1992

Development of a concomitant nickel and chromium sensitization model in the guinea pig.

Although nickel allergy is the most frequent contact hypersensitivity in man, reports on successful nickel sensitization in experimental animals are scarce. Chromium hypersensitivity, on the other hand, is readily induced in guinea pigs. In this study we set out to obtain reproducible nickel sensitization in guinea pigs, in order to establish an animal model for immunospecific tolerance and desensitization studies in which two non-cross-reacting metal allergens, chromium and nickel, could be studied simultaneously. Strong and reproducible sensitization to nickel was achieved by injecting low amounts of Freund's complete adjuvant and nickel sulfate in a split-adjuvant procedure. Strong erythematous reactions were observed as early as 14 days after sensitization and could be elicited both by intradermal and open epicutaneous challenges. Optimal evaluation was with nickel sulfate administered epicutaneously in 40% dimethyl sulfoxide to enhance skin penetration. Hypersensitivity could be transferred with lymphocytes and not with serum. Sensitization procedures for nickel and chromium then could successfully be combined in a double sensitization procedure. With four different guinea pig strains no genetic restriction was observed for the induction of nickel or chromium sensitivity. However, for both metals a clear sex and age dependence was observed: female guinea pigs reached a higher degree of sensitization than males, whereas sensitization in young animals was relatively weak.

Administration, Cutaneous↗
PubMedDate not supplied

Chromium-induced lymph node histiocytic proliferation after hip replacement. A case report.

BACKGROUND: Prosthetic joint replacement is frequently used for the treatment of degenerative joint disease, rheumatoid arthritis, bone tumors and traumatic lesions. The prostheses contain such materials as titanium, cobalt and chromium. We describe a patient who, after total hip arthroplasty, developed an inguinal-pelvic mass. Fine needle aspiration revealed metallic particles, also seen on light microscopy in reactive pelvic lymph nodes. Ultrastructure was consistent with the presence of foreign particles, while energy dispersive x-ray microanalysis established the presence of chromium. To our knowledge, this is the first report of chromium-related lymph node metallosis diagnosed by fine needle aspiration. CASE: Eight years after total hip arthroplasty, a 78-year-old woman developed a right pelvic cystic mass. Aspiration drainage was performed. Smears from fine needle aspiration showed numerous macrophages with abundant, foamy cytoplasm and round nuclei without atypia. Small, birefringent particles were seen in the cytoplasm. Histopathology showed fibroconnective tissue with chronic inflammation and marked lymph node sinus histiocytosis. Within histiocytes, numerous particles were present, identical to those seen in the smears. Their nature as "foreign bodies" was confirmed by electron microscopy, and the presence of chromium was shown by energy dispersive x-ray analysis. CONCLUSION: Fine needle aspiration and polarized microscopy are excellent techniques to evaluate foreign materials in lymph nodes draining the sites of joint prostheses, thus precluding confusion with other conditions, such as metastatic carcinoma.

Aged↗
PubMed1980

Flameless atomic absorption spectroscopy of plasma chromium.

A flameless atomic absorption spectroscopy method has been developed for the measurement of chromium. Background correction has been modified by recording non-atomic absorption separately from atomic absorption on a double-pen recorder. This was achieved by using the prime spectral line of uranium (358.5 nm, within 0.6 nm of that of chromium--357.9 nm) and was possible only because of the absence of uranium from the plasma samples. Masking of the analytical signal at atomisation by non-atomic absorption was thus eliminated and gave the method a sensitivity of 3 pg and a detection limit of 150 pg/ml. Postprandrial plasma chromium values were measured in 32 insulin-treated diabetics (1.65 +/- 0.15 ng/ml), in 53 non-insulin treated diabetics (2.0 +/- 0.16 ng/ml), and in 144 control non-diabetics (2.00 +/- 0.14 ng/ml). The difference between the mean plasma chromium level of the insulin-treated diabetics and both the non-insulin treated diabetics and the control groups was statistically significant (P < 0.05).

Adolescent↗
PubMed1991

An assessment and quantitative uncertainty analysis of the health risks to workers exposed to chromium contaminated soils.

Millions of tons of chromite-ore processing residue have been used as fill in various locations in Northern New Jersey and elsewhere in the United States. The primary toxicants in the residue are trivalent chromium [Cr(III)] and hexavalent chromium [Cr(VI)]. The hazard posed by Cr(III) is negligible due to its low acute and chronic toxicity. In contrast, Cr(VI) is considered a inhalation human carcinogen at high concentrations. Approximately 40 commercial and industrial properties in Northern New Jersey have been identified as containing chromite ore processing residue in the soil. One site, a partially-paved trucking terminal, was evaluated in this assessment. The arithmetic mean and geometric mean concentrations of total chromium in soil were 977 and 359 mg/kg, respectively. The data were log-normal distributed. The arithmetic mean and geometric mean concentrations of Cr(VI) in surface soil were 37.6 and 3.1 mg/kg, respectively. The data could not be fit to a standard distribution, likely due to the large number of samples with concentrations below the method detection limit (65%). Dose was calculated for each exposure route using a Monte Carlo statistical simulation. Probability distributions of most exposure parameters were incorporated into the analyses to predict the range and probability of uptake for persons in the exposed population. The exposure parameter distributions included in this assessment are: the concentrations of Cr(VI) and total chromium in air and soil, fraction of the year when suspension of airborne soil particulates is likely to occur due to weather conditions, fraction of Cr(VI) in air which is respirable (less than 10 microns), soil loading rate on skin, occupational tenure, and body weight. The techniques used in this assessment are applicable for evaluating the human health risks posed by most industrial sites having contaminated soil. The estimated average daily dose (ADD) via ingestion and dermal absorption for the individual exposed at the 95th percentile was about 48,000- and 91-fold below the U.S. EPA reference dose (RfD) for Cr(III) and Cr(VI), respectively. Since inhalation of Cr(VI) contaminated dust (but not ingestion or dermal contact) poses a cancer hazard, the lifetime average daily doses (LADDs) associated with exposure at the 50th and 95th percentile were calculated to be 9.8 x 10(-8) and 1.3 x 10(-6), respectively. Based on this analysis, industrial sites having soil concentrations of Cr(VI) below 230 ppm do not pose a significant noncarcinogenic or carcinogenic health hazard following acute or chronic exposure. These risks would be even smaller if the sites were paved.

Administration, Inhalation↗
PubMed2006

Selected science: an industry campaign to undermine an OSHA hexavalent chromium standard.

While exposure to hexavalent chromium (Cr(VI)) has been associated with increased lung cancer risk for more than 50 years, the chemical is not currently regulated by the U.S. Occupational Safety and Health Administration (OSHA) on the basis of its carcinogenicity. The agency was petitioned in 1993 and sued in 1997 and 2002 to lower the workplace Cr(VI) exposure limit, resulting in a court order to issue a final standard by February 2006. Faced with the threat of stronger regulation, the chromium industry initiated an effort to challenge the scientific evidence supporting a more protective standard. This effort included the use of "product defense" consultants to conduct post hoc analyses of a publicly-funded study to challenge results viewed unfavorably by the industry. The industry also commissioned a study of the mortality experience of workers at four low-exposure chromium plants, but did not make the results available to OSHA in a timely manner, despite multiple agency requests for precisely these sorts of data. The commissioned study found a statistically significant elevation in lung cancer risk among Cr(VI)-exposed workers at levels far below the current standard. This finding changed when the multi-plant cohort was divided into two statistically underpowered components and then published separately. The findings of the first paper published have been used by the chromium industry to attempt to slow OSHA's standard setting process. The second paper was withheld from OSHA until it was accepted for publication in a scientific journal, after the rulemaking record had closed. Studies funded by private sponsors that seek to influence public regulatory proceedings should be subject to the same access and reporting provisions as those applied to publicly funded science. Parties in regulatory proceedings should be required to disclose whether the studies were performed by researchers who had the right to present their findings without the sponsor's consent or influence, and to certify that all relevant data have been submitted to the public record, whether published or not.

Carcinogens, Environmental↗
PubMed1995

Environmental exposure to chromium compounds in the valley of León, México.

The effects on the environment and health of the operation of a chromate compounds factory and tanneries in the León valley in central México are discussed. Sampling and analysis of chromium were performed in water, soil, and human urine. Groundwater has been polluted in an area of about 5 km2 by the leaching of a solid factory waste, which results in concentrations up to 50 mg/l of hexavalent chromium. The plume shape and extension appear to be controlled by the prevailing well extraction regime. Total chromium was detected in the soil around the factory as a result of both aerial transport and deposition of dust produced in the chromate process and irrigation with tannery-contaminated water. Analysis of the impact of chromium in air and water on populations with various degrees of exposure revealed that highly harmful health effects were not observed.

Chromium Compounds↗
PubMed1991

Chromium cycling in soils and water: links, gaps, and methods.

The major links in the cycling of chromium in soils and in natural waters are between chromium(III) and chromium (VI). Between the larger links are lesser links involving processes of mobilization and oxidation of CrIII and reduction of CrVI. The gaps are mainly in our understanding of the factors that control these processes. If soluble CrIII is added to an "average" soil, a portion of it will become immediately oxidized by manganese oxides to CrVI. The rest of the CrIII may remain reduced for long periods of time, even in the presence of electron-accepting manganese oxides. However, this less available CrIII can be mobilized by low molecular weight organic complexers and then oxidized where redox conditions are optimal. Usually part of any CrVI added to a soil or sediment will be reduced instantly, especially under acid conditions. On the other hand, high concentrations of polluting CrVI may quickly exhaust the readily available reducing power of the matrix material and excess CrVI, the thermodynamically stable form in air, may persist for years in soils or lagoons without reduction. Cleanup of chromium pollution must involve the surrounding of both CrIII and CrVI with excesses of slowly available reducing substances and sealing them permanently from inputs of atmospheric oxygen. Monitoring the effectiveness of the measures is mandatory, but fortunately the chemical testing for CrVI in soil and water is simple and problem free compared with most colorimetric determinations.

Adsorption↗
PubMed2005

Speciation of chromium via laser-induced breakdown spectroscopy of ion exchange polymer membranes.

A new method for the speciation of ng/mL concentrations of Cr(III) and Cr(VI) solutions with analysis by laser-induced breakdown spectroscopy (LIBS) is reported. Speciation is achieved by pre-concentration of the chromium onto commercially available cation exchange polymer membranes. Chromium(III) is removed directly by cation exchange; chromium(VI) in the filtrate is reduced to Cr(III) and concentrated onto a second cation exchange membrane, affording independent measurement of both species. Large volumes of waters containing Cr(III) and Cr(VI) can be concentrated onto the membranes and directly analyzed by laser-induced breakdown spectroscopy. The estimated limit of detection corresponds to 500 ng of Cr on the membrane: if a solution volume of 1 L is used, then the detection limit corresponds to a solution concentration of 0.5 ng/mL. Excellent separation of the chromium species is attained. Results show that overall method efficiencies range from 94-116% and are independent of the matrix. The influence of pH has been measured, and although Cr(VI) converts to Cr(III) in acidic solutions, the total Cr recoveries are not appreciably influenced by pH over the range of natural waters (4 to 9). In addition, speciation was performed in the presence of a number of different cations and showed that the method is robust in many different and complex matrices.

Chromium↗
PubMed2002

Effects of dietary chromium chloride supplementation on performance, some serum parameters, and immune response in broilers.

This study was conducted to investigate the effect of increasing dietary levels of inorganic chromium (CrCl3 x 6H2O) on the performance, blood chemistry, and immune response of broilers. Eighty newly hatched Ross PM3 broiler chicks were evenly distributed to five groups of 16 chicks each. Two groups (control and only sheep red blood cell inoculated) were fed the basal diet containing 2.2 and 4.5 mg Cr/kg and the remaining groups were fed 20, 40, or 80 mg/kg Cr-supplemented diets for 44 d. Chicks in all groups, except in the control, at 3 and 5 wk of age, were injected intraperitonally with sheep red blood cell for determining the primary and secondary antibody responses, respectively. When the chicks were 4 wk of age, a delayed-type hypersensitivity test was performed. White blood cells were differentiated. Blood samples were collected for the determination of serum proteins, glucose, cholesterol, cortisol, minerals, and alkaline phosphatase activity and for antibody response. Chromium had no effect on weight gain, but 20 mg/kg supplemental Cr resulted in 18.57% reduction in feed consumption and improved feed efficiency by 16.77%. Chromium did not affect serum cholesterol and P levels but reduced serum glucose and increased serum protein, Cr, Ca, and Mg levels, and ALP activity. A slight reduction was observed with Cr supplementation in cortisol levels. Slight but not significant increases were observed with Cr in serum Zn and Cu. Chromium increased the ratio of bursa of Fabricius and liver to body weight. Heterophil and monocyte counts and heterophil/lymphocyte ratio were reduced and lymphocyte counts, total antibody, IgG, and IgM titers were increased by supplemental Cr. All levels of Cr increased the cell-mediated response to phytohemagglutinin. No alterations in tissues were observed by histopathological examinations.

Animal Feed↗
PubMed2004

Bioaccumulation properties of nickel-, cadmium-, and chromium-resistant mutants of Pseudomonas aeruginosa NBRI 4014 at alkaline pH.

Nickel-, cadmium-, and chromium-resistant mutants of Pseudomonas aeruginosa sp. NBRI 4014 are potent growth promontory strains. In the presence of metal(s), they have shown increased cell morphology and could accumulate nickel (2.0874 mM/g), cadmium (2.295 mM/g), and chromium (2.997 mM/g) at pH 9. However, chromium accumulation was maximum, but the toxicity levels of nickel, cadmium, and chromium was ranged from 90 to 504 microM of used metal(s). Bioaccumulation increases up to the fifth day at the highest used metal concentration and then became constant. This suggests their exploitation for detoxification and subsequently loaded biomass treatment for the recovery of accumulated metal(s).

Absorption↗
PubMed2005

Phytotoxicity and phytoaccumulation of trivalent and hexavalent chromium in brake fern.

A recently recognized hyperaccumulator plant, Chinese brake fern (Pteris vittata), has been found to extract very high concentration of arsenic from arsenic-contaminated soil. Chromium usually is a coexisting contaminant with arsenic in most contaminated soils. The potential application of ferns for phytoremediation of chromium(III)- and chromium(VI)-contaminated soils and their phytotoxicity to ferns has not been studied before. In this study, chromium distribution and phytotoxicity at the plant and cellular levels of brake ferns were studied using chemical analyses and scanning electron microscopy. The results show a higher phytotoxicity of Cr from Cr(VI)-contaminated soil to Chinese brake fern than from Cr(III)-contaminated soil. Phytotoxicity symptoms included significant decreases both in fresh biomass weight and relative water content (RWC), and also in leaf chlorosis during the late stage of growing. At higher concentrations (500 mg/kg Cr[VI] and 1,000 mg/kg Cr[III] addition), plants showed reduction in the number of palisade and spongy parenchyma cells in leaves. Compared with other plant species reported for phytoremediation of Cr(VI)-contaminated soil, brake fern took up and accumulated significant amounts of Cr (up to 1,145 mg/kg in shoots and 5,717 mg/kg in roots) and did not die immediately from phytotoxicity. Our study suggests that Chinese brake fern is a potential candidate for phytoremediation of Cr(VI)-contaminated soils, even though plants showed severe phytotoxic symptoms at higher soil Cr concentrations.

Chromium↗
PubMed2006

Hexavalent chromium reduces larval growth and alters gene expression in mummichog (Fundulus heteroclitus).

Hexavalent chromium [Cr(VI)] is a common bioavailable metal ion that causes oxidative stress, DNA adducts, and perturbs gene expression. Changes in gene expression are useful biomarkers of toxicant exposure that provide information about an organism's health, adaptability, and toxicant-specific effects. Therefore, we developed a cDNA array for the estuarine sentinel species mummichog (Fundulus heteroclitus). Mummichog larvae were exposed to concentrations ranging from 0 to 24 mg/L (462 microM) of Cr(VI) for 30 d, and growth was measured to determine the no-observable-effect concentration (1.5 mg/L) and the lowest-observable-effect concentration (3 mg/L). Body burdens from Cr(VI)-exposed fish showed a dose-dependent increase and were inversely correlated to body weight. Mummichog larvae exposed to Cr(VI) differentially expressed 16 genes in a dose-dependent manner, including GLUT-2, L-FABP, ATPase synthase 8, type II keratin, TBT-binding protein, and complement component C3-2. Many of these genes are involved in energy metabolism or growth, which is consistent with the reduced growth observed. In subsequent experiments, adults were exposed to Cr(VI) for 7 d at 0, 1.5, or 3 mg/L, because adult mummichog are used in monitoring Superfund sites. Hexavalent chromium altered the expression of 10 genes in adult liver, including HGFA, H-FABP, and complement component C3-2. Many of these genes also are involved in energy metabolism. The mummichog arrays provide a potential mechanism for the effects of Cr(VI) on growth. We anticipate using these arrays and the data they provide to monitor effects at polluted sites, to assess the bioavailability of chromium at these sites, and to investigate the efficacy of remediation in chromium-polluted estuaries.

Animals↗
PubMed1993

The differences in toxicity and release of bone-resorbing mediators induced by titanium and cobalt-chromium-alloy wear particles.

We investigated the relationship between the toxic effects of metal wear particles and their ability to stimulate the release of inflammatory mediators implicated in bone resorption. In vitro studies were carried out with use of rat peritoneal macrophages, which were exposed to either cobalt-chromium-alloy or titanium-aluminum-vanadium particles, milled from the metal components of hip prostheses. The particles were in the size-range of, and at concentrations similar to, those found in the tissues surrounding failed prostheses in humans. The titanium-aluminum-vanadium particles showed little toxicity even at high concentrations, while the cobalt-chromium particles were very toxic. The titanium-aluminum-vanadium particles induced significantly more release of prostaglandin E2 than did the cobalt-chromium particles, and this was true for a wide range of concentrations. Exposure to titanium-aluminum-vanadium increased the release of prostaglandin E2, interleukin-1, tumor necrosis factor, and interleukin-6. In contrast, exposure to cobalt-chromium particles was associated with a decreased release of prostaglandin E2 and interleukin-6, and it had little effect on the release of interleukin-1 and tumor necrosis factor.

Alloys↗
PubMed2005

A potentiometric rhodamine-B based membrane sensor for the selective determination of chromium ions in wastewater.

The construction and performance characteristics of a novel chromate ion-selective membrane sensor are described and used for determining chromium(III) and chromium(VI) ions. The sensor is based on the use of a rhodamine-B chromate ion-associate complex as an electroactive material in a poly(vinyl chloride) membrane plasticized with o-nitrophenyloctyl ether as a solvent mediator. In a phosphate buffer solution of pH 6 - 7, the sensor displays a stable, reproducible and linear potential response over the concentration range of 1 x 10(-1) - 5 x 10(-6) mol l(-1) with an anionic Nernstian slope of 30.8 +/- 0.5 mV decade(-1) and a detection limit of 1 x 10(-6) mol l(-1) Cr(VI). High selectivity for Cr(VI) is offered over many common anions (e.g., I-, Br-, Cl-, IO4-, CN-, acetate, oxalate, citrate, sulfate, phosphate, thiosulfate, selenite, nitrate) and cations (e.g., Ag+, Ca2+, Sr2+, Co2+, Ni2+, Cu2+, Mn2+, Fe2+, Zn2+, Cd2+, Al3+, Cr3+). The sensor is used for determining Cr(VI) and/or Cr(III) ions in separate or mixed solutions after the oxidation of Cr(III) into Cr(VI) with H2O2. As low as 0.2 microg ml(-1) of chromium is determined with a precision of +/-1.2%. The chromium contents of some wastewater samples were accurately assessed, and the results agreed fairly well with data obtained by atomic absorption spectrometry.

Algorithms↗
PubMedDate not supplied

Chromate reduction by chromium-resistant bacteria isolated from soils contaminated with dichromate.

Extensive use of hexavalent chromium [Cr(VI)] in various industrial applications has caused substantial environmental contamination. Chromium-resistant bacteria isolated from soils can be used to remove toxic Cr(VI) from contaminated environments. This study was conducted to isolate chromium-resistant bacteria from soils contaminated with dichromate and describes the effects of some environmental factors such as pH, temperature, and time on Cr(VI) reduction and resistance. We found that chromium-resistant bacteria can tolerate 2500 mg L(-1) Cr(VI), but most of the isolates tolerated and reduced Cr(VI) at concentrations lower than 1500 mg L(-1). Chromate reduction activity of whole cells was detected in five isolates. Most of these isolates belong to the genus Bacillus as identified by the 16S rRNA gene sequencing. Maximal Cr(VI) reduction was observed at the optimum pH (7.0-9.0) and temperature (30 degrees C) of growth. One bacterial isolate (Bacillus sp. ES 29) was able to aerobically reduce 90% of Cr(VI) in six hours. The Cr(VI) reduction activity of the whole cells of five isolates had a K(M) of 0.271 (2.61 mM) to 1.51 mg L(-1) (14.50 mM) and a V(max) of 88.4 (14.17 nmol min(-1)) to 489 mg L9-1) h(-1) (78.36 nmol min(-1)). Our consortia and monocultures of these isolates can be useful for Cr(VI) detoxification at low and high concentrations in Cr(VI)-contaminated environments and under a wide range of environmental conditions.

Bacillus↗
PubMed2006

[Barrel finishing of cobalt-chromium alloy cast plate--basic study on polishing materials and time].

PURPOSE: This study was designed to establish the optimum grinding condition of barrel finishing for cobalt-chromium alloy. Smoothing of the mucosal surface, reduction of labor, and improvement of the working environment were estimated by the application of barrel finishing to cobalt-chromium alloy. METHODS: Tabular test pieces cast in cobalt-chromium alloy whose surface was standardized by waterproof abrasive papers were used in this study with a centrifugal flow barrel finishing machine. The abrasive that was most suitable for the primary polishing was selected, and proper polishing time was then decided by measuring the surface roughness of the test pieces. The abrasive and polishing time for the secondary polishing were decided in the same manner. Finally, the surface texture of the test pieces, which were finished in this condition by the manufacturer's instruction or by the electrolytic polishing method, were compared. Statistic analysis was performed by one-way analysis of variance and the multiple comparison test. RESULTS: A triangular prism-shape abrasive made of Al(2)O(3) and SiO(2) whose one side or height was 6 mm was selected for the primary polishing, and the same kind of abrasive with one side or height of 4 mm was chosen for the secondary one. The optimum polishing time for the primary polishing and the secondary polishing were 60 minutes and 40 minutes, respectively. The surface roughness of the test pieces that were finished in this condition was significantly smaller than that finished following the manufacturer's indication or that finished by the electrolytic polishing method. CONCLUSION: The optimum polishing condition of barrel finishing for cobalt-chromium alloy was established in this study. For the polished surface of cast dentures, polishing by a rotary cutting instrument after barrel finishing in this condition would be needed, as no luster was observed on the finished surface.

Aluminum Oxide↗
PubMed1992

Supplemental chromium for stressed and growing feeder calves.

The effects of supplemental chromium (Cr) from high-Cr yeast were investigated with steer calves fed corn silage diets. One hundred eight Charolais-crossed calves, weighing 245 kg after marketing and transport, were allotted to one of four treatments during the initial 28-d stress period: control, .4 ppm of Cr in the diet, long-acting injectable oxytetracycline (LAOTC), and Cr + LAOTC. Those fed Cr received 4 mg of Cr/d for the first 3 d sprinkled onto a small amount of hay over the silage. Chromium without LAOTC increased (P less than .05) ADG by 30% (.61 vs .79 kg/d) and ADG/DMI by 27% (.123 vs .156). Oxytetracycline alone increased (P less than .05) ADG by 30% and DMI by 15%. Chromium had no effect on morbidity. However, LAOTC tended (P less than .14) to reduce morbidity (26.0 vs 14.0%) after its administration. After d 28, steers were processed. Two weeks later, they were rerandomized within Cr groups to urea-corn vs soybean meal supplementation of corn silage during a 70-d growing period. Level of Cr was reduced to .2 ppm. Jugular blood was collected from eight steers on each treatment on two occasions. Chromium had no effect on ADG or ADG/DMI. However, Cr decreased (P less than .05) serum cortisol (75.0 vs 55.6 nmol/L). Furthermore, Cr increased (P less than .05) serum immunoglobulin M and total immunoglobulins in calves fed diets with soybean meal but had no effect in calves with urea-corn supplementation.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed2006

Immune response and disease resistance of Oreochromis mossambicus to Aeromonas hydrophila after exposure to hexavalent chromium.

The objective of this study was to investigate the effect of chronic exposure to sublethal concentrations of hexavalent chromium (K2Cr2O7) on the immune response and disease resistance of Oreochromis mossambicus (Peters) to bacterial Aeromonas hydrophila infection. Fish (45 to 50 g) were exposed to 0.005, 0.05, 0.5, and 5 mg l(-1) [0.01, 0.1, 1, and 10% LC50, respectively] of hexavalent chromium Cr (VI) for 28 d. The specific immune response was assessed by antibody response to A. hydrophila by bacterial agglutination assay, and to sheep red blood cells (SRBC) by plaque forming cell (PFC) assay. In addition, nonspecific immune mechanisms were assessed by serum lysozyme activity and reactive nitrogen intermediates, the latter in terms of nitric oxide (NO) production by peripheral blood leucocytes. Overall immunity was assessed by disease resistance against live virulent A. hydrophila. The study clearly indicated that chronic exposure of fish to 0.5 and 5 mg l(-1) of chromium (VI) decreased both nonspecific and specific parameters of the immune system, which resulted in a lower disease resistance to A. hydrophila. Interestingly, 0.05 mg l(-1) of Cr (VI) enhanced disease resistance and both nonspecific and specific immune responses to A. hydrophila. Our study revealed a concentration-dependent modulation of the immune system by chromium (VI), as demonstrated by suppressive or stimulatory effects on lymphocytes, lysozyme, phagocytic killing mechanisms, and disease resistance in O. mossambicus.

Aeromonas hydrophila↗