Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “microspheres”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources
PubMed1986

Polyacrolein microspheres as a new solid phase for radioimmunoassay.

Polyacrolein (PA) microspheres contain reactive aldehyde groups through which ligands containing primary amino groups such as proteins and drugs can be covalently bound in a single step at physiological pH. Antibodies against cyclic-AMP, digoxin and rabbit serum were thus coupled to PA microspheres. The immuno-microspheres were kept in suspension or freeze-dried, with insignificant decrease in their binding capacity. The conjugates were used in the respective radioimmunoassay (RIA) systems to facilitate the separation of the free and the antibody-bound 125I ligands, in comparison with precipitation of Protein A of Staphylococcus aureus. Cyclic-AMP was assayed using PA microspheres coupled either with the primary antibody or with anti-rabbit serum as a secondary antibody, in a buffer system, in chick plasma, in urine and in media in which avian dispersed kidney cells had been stimulated by various agents. The results obtained using the immuno-microspheres and the bacterial separation methods were indistinguishable. Other 125I-ligands, such as digoxin in buffer system or thyroxine and triiodothyronine in chick plasma, were assayed in the picogram range. Owing to the solubility of non crosslinked microspheres conjugates in toluene-based scintillation fluids, both the free and the bound fractions could be counted when using 3H-ligands. Corticosterone was assayed using this technique.

Acrolein↗
PubMedDate not supplied

Preparation of regular sized Ca-alginate microspheres using membrane emulsification method.

Monodisperse Ca-alginate microspheres were prepared using the membrane emulsification method. Three ionic types of drugs (anionic, cationic and non-ionic) were incorporated into the microspheres, and the effects of sodium alginate concentration and the pressure applied during the dispersing process on the properties of the microspheres were examined. Monodisperse microspheres were obtained when the concentration of alginate solution was 2 wt% and the pressure applied was 0.4 x 10(5) Pa. The mean size of microspheres was approximately 4 microm. Lidocaine x HCl (cationic), sodium salicylate (anionic) and 4-acetamidophenol (non-ionic) were selected as ionic model drugs and included in the alginate microspheres. Lidocaine x HCl (cationic drug) release was more retarded than that of the anionic drug, because of the electrostatic attraction between the negative charge of the ionized carboxyl group in the alginate chain and the positive charge of the cationic drug. In acidic release medium, a slow release was observed due to the low swelling characteristic and the increased viscosity of alginate, regardless of ionic type of drug.

Acetaminophen↗
PubMedDate not supplied

Impregnation and release of aspirin from chitosan/poly(acrylic acid) graft copolymer microspheres.

The purpose of this study was to produce aspirin-impregnated microspheres of chitosan/poly(acrylic acid) copolymer in order to evaluate the release characteristics as a function of pH, simulating the fluids in the gastrointestinal tract. Chitosan microspheres were obtained by the coacervation-phase separation method, induced by the addition of a non-solvent (NaOH 2.0 M solution). The microspheres were cross-linked with glutaraldehyde, reduced with sodium cianoborohydride and grafted with poly(acrylic acid). The impregnation of aspirin into chitosan/poly(acrylic acid) copolymer microspheres was achieved by the dissolution of the drug in water:ethanol (2:1), which was adsorbed by the microspheres for 24h at 25 degrees C. The efficiency of aspirin impregnation was high (approximately 94%). The approach employed herein in the production of aspirin-impregnated microspheres using chitosan/poly(acrylic acid) can be a suitable drug-release control system.

Acrylic Resins↗
PubMedDate not supplied

Study of processing parameters influencing the properties of diltiazem hydrochloride microspheres.

Diltiazem hydrochloride-ethylcellulose microspheres were prepared by the water-in-oil emulsion-solvent evaporation technique. Small and spherical microspheres having a mean microsphere diameter in the range of 40-300 microm and entrapment efficiency of approximately 60-90% were obtained. Scanning electron micrographs of drug-loaded microspheres showed the presence of uniformly distributed small pores and absence of drug crystals on their surface, indicating simultaneous precipitation of drug and the polymer from the solvent during solvent evaporation. Differential scanning calorimetric analysis confirmed the absence of any drug-polymer interaction. The in vitro release profile could be altered significantly by changing various processing parameters to give a controlled release of drug from the microspheres. The stability studies of the drug-loaded microspheres showed that the drug was stable at storage temperatures, 5-55 degreesC, for 12 weeks.

Administration, Oral↗
PubMedDate not supplied

The influence of stirring rate on biopharmaceutical properties of Eudragit RS microspheres.

Eudragit RS microspheres containing pipemidic acid, as a model drug, were prepared by the solvent evaporation method using an acetone/liquid paraffin solvent system. The aim of the work was to evaluate the influence of stirring rate on the average particle size, particle morphology, drug content and release kinetics, as well as the influence of particle size on microsphere morphology, drug content and release kinetics. Stirring rate has been found to significantly influence the average diameter of microspheres. The average diameter decreases as the stirring rate increases. This can be explained by production of a finer dispersion of droplets when higher stirring rates are applied and, consequently, by the formation of smaller microspheres. With increasing stirring rate and increasing fraction particle size the drug content also increases. It is assumed that this dependence is a consequence of an uneven diffusion of the drug from the inner to the outer emulsion phase, and an uneven encapsulation of drug particles during the preparation. Drug release follows the Higuchi model. As seen from SEM photographs, larger microspheres are more porous and the microspheres produced at higher stirring rates are more porous than those produced at lower stirring rates. This explains the unexpected finding that the release rate increases as the fraction particle size and the stirring rate increase.

Acrylic Resins↗
PubMedDate not supplied

Evaluation of 99mTc labelled poly lactic acid microspheres for diagnostic radioembolization.

Radioembolization is used in diagnostic imaging of the lungs and for radioembolization therapy of hepatic tumours. Presently, 99mTc labelled macroaggregates or microspheres of human serum albumin (HAM) are used for this purpose. Poly lactic acid (PLA) is biodegradable, like HAM, and, unlike HAM, is not a blood product. The aim of the present study was to evaluate the uptake and biodegradation of PLA microspheres in lungs. PLA (MW = 48720 Da) microspheres of 1.0-100 microm (mean = 39.5 microm) in diameter were prepared by solvent evaporation from methylene chloride. They were labelled with 99mTc by stannous chloride reduction at pH 3, with an efficiency of 98% and a stability of 96% at 24 h. For biodistribution studies, 15 mice were i.v. injected with 20 microCi 99mTc-PLA microspheres in 0.1 ml and sacrificed at 15 min, 1, 3, 6 and 24 h (three at each time point). All the organs were removed, weighed and counted against a standard prepared from 1/100 dilution of the injected radioactivity. Some mice were similarly injected and sacrificed at 30 min, 15 and 30 days. The lungs were removed and frozen, and 10 microm sections were obtained, stained with haemotoxylin and eosin and examined under a light microscope. Five rabbits were i.v. injected with 1 mCi of 99mTc-PLA microspheres. Scintigrams were obtained at various intervals up to 24 h. In mice, the lung uptake was significant at 30 min-1h post-injection. In rabbits, the lungs were the only organs visualized up to 24 h. Microscopic examination of tissue sections demonstrated slow biodegradation of PLA particles. In conclusion; (1) The high lung uptake obtained in mice and rabbits indicates the suitability of PLA microspheres for lung imaging, and (2) although the slow biodegradation rate might be a disadvantage in patients with lung disorders in diagnostic studies, it may be an advantage in therapeutic applications with radionuclides which have long physical half lives.

Animals↗
PubMedDate not supplied

Preparation and in vitro characterization of gelatin microspheres containing Levodopa for nasal administration.

Transnasal absorption of pharmaceutical drugs has been recognized as an interesting alternative to the more conventional routes of administration. The aim of this paper was to develop a method of administrating L-dopa following the transnasal route. Gelatin microspheres were prepared by the w/o emulsification solvent extraction technique: the microspheres had a median particle size of 16.2 +/- 4.2 microm and were prepared using a stirring speed of 600 rpm for 5 min at 80 degrees C. The microspheres obtained were spherical and smooth-surfaced, and the microsphere size was inversely proportional to stirring speed (300-700 rpm) and to the percentage of the emulsifier (Tween 85, 1.4-2.7% v/v). L-dopa was incorporated into the microspheres with an efficiency of 65 +/- 6.7%. L-dopa was released from the microspheres, showing an initial fast release rate, followed by a second slower release rate.

Absorption↗
PubMedDate not supplied

Morphological changes in degrading PLGA and P(DL)LA microspheres: implications for the design of controlled release systems.

The in vitro degradation of microspheres of polymers of lactic and glycolic acids were investigated by monitoring the mass loss from the device, the molecular weight of the polymer and the morphological changes of the particles with time. Two different sequences of morphological changes were found to be operative, depending upon the polymer from which they were made--one, (I) for the high molecular weight P(DL)LA, and the other, (II) for all PLGAs and the low molecular weight P(DL)LA. Microspheres of category I showed clear evidence of heterogeneous degradation, where the initially dense microsphere developed a hollow interior. Microspheres of category II plasticized on hydration due to reduction in the Tg of the polymer below the incubation temperature of 37 degrees C. There was suppression of release of entrapped globular proteins from microspheres that underwent plasticization (category II), while slow and sustained release was seen from those that did not (category I). It is proposed that plasticization renders the matrix of category II microspheres non-porous, which prevents release by pore-diffusion. The mass loss profiles of PLGA were found to be different from those reported in the literature, in that the rates of mass loss after an initial lag time were not as rapid as has been reported. The experimental conditions used, namely the use, or otherwise, of agitation, is suggested as the reason for these differences and the need to draw a correlation between in vitro experimental conditions and in visa behaviour is emphasized.

Biocompatible Materials↗
PubMedDate not supplied

Effects of fabrication conditions on the characteristics of etanidazole spray-dried microspheres.

Etanidazole, a hypoxic radiosensitizer, has potential applications in radiotherapy. Due to its high solubility in water, common methods to encapsulate etanidazole into microspheres are not feasible. In this study, a spray-drying technique was employed to encapsulate etanidazole into the biodegradable polymer, PLGA65:35. Different fabrication conditions, such as polymer concentration, inlet temperature, feed rate, compressed air flow rate, aspirator ratio, as well as drug-loading were investigated to understand their effects on the particle size and distribution, encapsulation efficiency, and release behaviour. The effect on the morphologies of microspheres were also observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was demonstrated that most of these fabrication conditions influence either the droplet formation process or its subsequent evaporation and particle shrinking process, thereby determining the properties of the microspheres obtained. In many cases, temperature seems to be more important among all the factors considered. The present study demonstrates good fabrication conditions for producing the etanidazole-PLGA65:35-microspheres by using DCM as a solvent. The release of etanidazole from the spray dried PLGA65:35 microspheres was very fast, with an initial burst of 47% within the first 30 min and a cumulative release of over 80% within the first 5.5 h. The encapsulation efficiency of the drug in the microspheres varied with operating conditions from 69-96%.

Calorimetry, Differential Scanning↗
PubMed2005

Encapsulation of vitamin C in tripolyphosphate cross-linked chitosan microspheres by spray drying.

This paper describes vitamin C-encapsulated chitosan microspheres cross-linked with tripolyphosphate (TPP) using a new process prepared by spray drying intended for oral delivery of vitamin C. Thus, prepared microspheres were evaluated by loading efficiency, particles size analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), zeta potential and in vitro release studies. The microspheres so prepared had a good sphericity and shape but varied with the volume of cross-linking agent solution added. They were positively charged. The mean particle size ranged from 6.1-9.0 microm. The size, shape, encapsulation efficiency, zeta potential and release rate were influenced by the volume of cross-linking agent. With the increasing amount of cross-linking agent, both the particle size and release rate were increased. Encapsulation efficiency decreased from 45.05-58.30% with the increasing amount of TPP solution from 10-30 ml. FTIR spectroscopy study showed that the vitamin C was found to be stable after encapsulation. XRD studies revealed that vitamin C is dispersed at the molecular level in the TPP-chitosan matrix. Well-defined change in the surface morphology was observed with the varying volume of TPP. The sphericity of chitosan microspheres was lost at higher volume of cross-linking agent. The release of vitamin C from these microspheres was sustained and affected by the volume of cross-linking agent added. The release of vitamin C from TPP-chitosan microspheres followed Fick's law of diffusion.

Administration, Oral↗
PubMed2005

Preparation and in vitro evaluation of propylthiouracil microspheres made of Eudragit RL 100 and cellulose acetate butyrate polymers using the emulsion-solvent evaporation method.

The objectives of this investigation are to evaluate the encapsulation efficiency of the anti-thyroid agent 6-n-propyl-2-thiouracil using two polymers of different characteristics (cellulose acetate butyrate polymer, (CAB-551-0.01) and ammonio methacrylate copolymer (Eudragit RL 100) and to study the effect of this encapsulation on the drug release properties. Polymers were used separately and in combination to prepare different microspheres. Also, the effect of polymer solution phase viscosity was studied for each of the polymers and for their combinations. An Ostwald viscometer was used to evaluate the relative viscosities of polymer solution phases and their combinations. Microspheres with 25% theoretical drug loading of 6-n-propyl-2-thiouracil core material were prepared by the emulsion solvent evaporation method. Microspheres prepared from CAB-551-0.01, which has higher relative polymer phase viscosity than Eudragit RL 100, showed significantly lower drug release rates and a noticeable lag time. Polymer combinations of CAB-551-0.01 and Eudragit RL 100 (1:1) showed an interesting synergistic increase in relative polymer solution viscosities at all concentrations. Unlike microspheres prepared from the two polymers separately which follow Higuchi spherical matrix release kinetics, microspheres prepared using a combination (1:1) of the two polymers showed near zero order with faster rates compared to those prepared using CAB-551-0.01 equivalent polymer concentrations. The results of this study suggest that 6-n-propyl-2-thiouracil was successfully and efficiently encapsulated and release rates of matrix microspheres are related to polymer solution phase viscosity, but when polymer combinations were used other factors such as structural effects must be considered.

Cellulose↗
PubMed2006

Chitosan-coated alginate microspheres for embolization and/or chemoembolization: in vivo studies.

In this study, chitosan-coated alginate microspheres were prepared by the ionic complexation of alginate and chitosan biopolymers to use in embolization and/or chemoembolization studies. Biopolymeric microspheres were prepared by the ionic gelation technique of alginate with a suitable divalent cation (i.e. CaCl2) in a suspension medium composed of mineral oil and petroleum ether including emulsifier (i.e. Tween-80) and then obtained microspheres were coated with chitosan in an aqueous chitosan solution while the medium was magnetically stirred. The obtained microspheres are in the size range of 100-400 microm and they can be prepared as required by changing the preparation conditions (i.e. stirring rate, concentration of biopolymers, molecular weight and concentration of chitosan, etc.). In the in vivo studies, New Zealand rabbits were used as the test animals. Both complete and partial embolization of the kidney were achieved by using the microspheres. The renal angiograms obtained before/after embolization and the histopathological observations showed the feasibility of the chitosan-coated alginate microspheres as an alternative embolization and/or chemoembolization agent.

Alginates↗
PubMed2006

Enzymatic synthesis and evaluation of new novel omega-pentadecalactone polymers for the production of biodegradable microspheres.

Two novel co-polymers based on omega-pentadecalactone were enzymatically synthesized by a combination of ring-opening polymerization and polycondensation. Modified literature procedures enabled the production of the semi-crystalline materials with suitable molecular weights and melting characteristics. Microspheres were produced using an emulsion solvent evaporation method over a range of variables including manufacturing temperature, stirring speed and duration, surfactant concentration, continuous and disperse phase volume and polymer amount to establish how each variable affected the morphological characteristics of the microspheres. Results demonstrated that changes in emulsion viscosity influenced microsphere size. For polymer SH-L333, the microsphere surface was either smooth or porous depending on the manufacturing temperature used. For polymer SH-L334 the microsphere surface was rough or porous regardless of manufacturing temperature. This was possibly due to several combined factors including molecular weight and the greater hydrophilic nature of SH-L334. These new polymers have the potential for the manufacture of drug-loaded biodegradable microspheres for modified release drug delivery.

Biotransformation↗
PubMed2006

Colon-specific delivery of mesalazine chitosan microspheres.

Mesalazine (5-ASA) is a cyclo-oxygenase inhibitor and anti-inflammatory drug effective in Crohn's disease and ulcerative-colitis. As 5-ASA is rapidly absorbed from the small intestine and it is necessary to develop a colon-specific delivery system for it. Coated chitosan microspheres were used for this purpose by an emulsion-solvent evaporation technique based on a multiple w/o/w emulsion. Four hundred milligrams of chitosan solution (3%) in dilute acetic acid (0.5 M) containing 12% 5-ASA was dispersed into 2 ml solution of cellulose acetate butyrate (CAB) in methylene chloride. The primary induced w/o emulsion was dispersed into a 1% PVA aqueous solution to produce a w/o/w multiple emulsion and was stirred for approximately 2.5 h. The produced microspheres were separated, washed and dried. Release of 5-ASA from microspheres was studied in different pHs 1.2, 7.4, 6.8 and 6.8 in the presence of caecal contents of rat. The average size of microspheres was 200 microm. The highest yield efficiency (80%) was seen in medium molecular weight (MW) chitosan with a 1 : 2 core/coat ratio and the greatest loading efficiency (85%) related to the microspheres of the same type of chitosan but with a 1 : 1 core/coat ratio. Decreasing the coat content and increasing chitosan Mw increased the bioadhesion significantly (p < 0.05). Microspheres of chitosan with medium Mw and 1 : 1 core/coat that showed the greatest release of drug (near 80%) in the presence of caecal secretions with a zero-order mechanism, near zero per cent in pH 1.2 after 2 h, max 20% in pH 7.4 after 3 h and near 60% in pH 6.8 after 8 h seem suitable for site-specific delivery of 5-ASA in vitro.

Animals↗
PubMed2006

Implantation of vancomycin microspheres in blend with human/rabbit bone grafts to infected bone defects.

In orthopaedic applications, allografts are used for restoration of bone defects. In order to combine the effects of bone repair and to prevent the infection, antibiotic-impregnated bone grafts are under current investigation with promising early results. In this study, to preserve the stability of antibiotics and to provide appropriate release profiles for 4-6 weeks, antibiotic-loaded microspheres were administered in combination with allografts and vancomycin was the antibiotic loaded to microspheres. Particle size, surface characteristics, loading capacity and in vitro release characteristics of the microspheres with and without allografts were determined. In vivo studies were performed on rabbits and antibiotic amount was determined by a fluorescence polarization immunoassay (FPIA) method from synovial fluid sample aspirated. According to the results, although the in vitro study demonstrated effective antibiotic release of vancomycin from antibiotic-impregnated allografts for 5 weeks, in vivo conditions led to an early instability of the antibiotic (in powder form) and contrary to the high initial loading dose an effective release could not be obtained from the allografts after the first week. Following these studies, it was determined that antibiotic release over a minimum inhibitory concentration (MIC) for 6 weeks was realized from vancomycin-loaded microspheres which were implanted in a blend with allografts in bone defects. In conclusion, preservation of the antibiotic in microspheres maintained the bioactivity and provided the controlled antibiotic release, thus implantation of microspheres in a blend with allografts seemed to be a promising carrier system for the orthopaedic applications.

Animals↗
PubMed2006

Characterization and in vitro degradation of salicylate-derived poly(anhydride-ester microspheres).

The aim of this study was to investigate how glass transition temperature (Tg) influenced polymer microsphere formation and degradation of three chemically, similar novel salicylatebased poly(anhydride-esters): poly[1,6-bis(o-carboxyphenoxy)hexanoate] (CPH), Tg = 59 degrees C; poly[1,8-bis(o-carboxyphenoxy)octanoate] (CPO), Tg = 30 degrees C; and poly[1,10-bis(ocarboxyphenoxy) decanoate] (CPD), Tg = 27 degrees C. Microspheres of these polymers were prepared using a modified oil-in-water solvent evaporation method and processed by either resuspension or washed by centrifugation. The morphology of the microspheres determined by scanning electron microscopy (SEM) revealed that an extra washing step appears to increase aggregation as the Tg decreases; whereas only limited aggregation occurred in the polymer with the lowest Tg, CPD, in those not washed by centrifugation. Residual polyvinyl alcohol apparently affected the drug release rates from the microspheres by a stabilization process that produced an 8 h lag time and a 5% decrease in the amount of drug released over a 7 day period compared to microspheres washed free of PVA. These results demonstrate that salicylate-based poly(anhydride-esters) with sufficiently high Tgs, can be processed into microspheres that release salicylate over a time period amenable for drug delivery applications.

Anhydrides↗
PubMedDate not supplied

5-fluorouracil loaded chitosan microspheres for chemoembolization.

In this study, chitosan microspheres were prepared by a suspension cross-linking technique. A petroleum ether/mineral oil mixture was used as the suspension medium which includes an emulsifier, e.g. Tween-80. Glutaraldehyde was used as the cross-linker. 5-Fluorouracil was incorporated in the matrix for the possible use of the microspheres in chemoembolization. The size and size distribution of the chitosan microspheres varied in the size range of 100-200 microns, by changing the emulsifier concentration, stirring rate, chitosan/solvent ratio and drug/chitosan solution ratio. In summary, the size and size distribution of the microspheres decreased when the emulsifier concentration and stirring rate were increased. Smaller microspheres with narrower size distributions were obtained when the chitosan/solvent ratio and drug/chitosan ratio were lower. It was possible to load the chitosan microspheres with 5-FU to a concentration of 10.4 mg 5-FU/g chitosan. Around 60% of the loaded drug was released within the first 24 h, then the release rate became much slower.

Chemoembolization, Therapeutic↗
PubMedDate not supplied

Carboplatin-loaded PLGA microspheres for intracerebral injection: formulation and characterization.

The purpose of this study is to prepare and characterize injectable carboplatin-loaded poly(D,L,-lactic-co-glycolic) acid copolymer (PLGA) microspheres for the intracerebral treatment of malignant glioma. The microspheres were prepared by an acetone/mineral oil emulsion and solvent evaporation method. Preparation variables were optimized and the following processing conditions resulted in the highest drug loading and best yields of the microspheres compared with those prepared with the other variables: the PLGA concentration was 8% (w/w) in the internal phase; the emulsifier (Span 80) concentration was 8% (w/w) in the external phase; the ratio of the internal phase: the external phase was 1:8; the stirring speed was 1500 rpm; the emulsion time was 15 min; the solvent evaporation time was 3.75 hr. Microspheres so prepared were analysed for size distribution, drug loading, in vitro release and morphological characteristics. The drug release in phosphate buffer solution started with a 10-day slow release period, followed by a fast near zero order release period from 12 to 22 days. The carboplatin release in brain homogenate was slower than in phosphate buffer solution. The morphological changes of the microspheres during the in vitro degradation correlated with the drug relase profile. In conclusion, the carboplatin-loaded PLGA microspheres were specifically prepared to meet the specification as an injectable and biodegradable brain implant.

Animals↗