Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polymerization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources
PubMed1994

Comparison of titanium and absorbable polymeric surgical clips for use in laparoscopic cholecystectomy.

The use of hemostatic surgical clips is crucial in laparoscopic surgery. Metal clips can cause significant interference with computerized tomography, may have poor holding power, and may erode into important anatomic structures. Polymeric absorbable clips, which have advantages over metallic clips, are evaluated in this study. In vitro and in vivo studies were undertaken to evaluate the hold force, rate of degradation, tissue reactivity and safety of absorbable polymeric clips. Absorbable and titanium clips were applied across excised canine cystic ducts and both axial and transverse pull-off forces were measured. In the second phase, absorbable clips were implanted subcutaneously into male rats and the strength remaining within the clips was measured after 7, 10, 14, or 21 days. In phase 3, 30 pigs were randomized into six groups and each animal underwent a laparoscopic cholecystectomy. The cystic duct and artery were ligated with absorbable polymeric clips (experimental group) or titanium clips (control group). Animals were sacrificed at 7, 14, or 28 days and a celiotomy was performed. Intraabdominal adhesions were assessed and scored. The force required to dislodge the absorbable clip was significantly greater than for metallic clips for both axial and transverse forces. Absorbable clip strength retention decreased over time as expected with a retention of 11% original strength by the 21st day. Adhesions were highest when bile spillage occurred, but did not differ significantly between either clip type. Absorbable polymeric clips were hemostatically effective in this laparoscopic model and may offer advantages over metallic clips.

Animals↗
PubMed1988

The polymerization of amino acid adenylates on sodium-montmorillonite with preadsorbed polypeptides.

We studied the spontaneous polymerization of amino acid adenylates on Na-montmorillonite in dilute, neutral suspension, after polypeptides were adsorbed on the clay. This led to the unexpected finding that the degrees of polymerization (DP's) of the oligo- and poly-peptides obtained depended on the amounts of polypeptides that were preadsorbed. Plotting average molecular weights obtained against c-spacings of the clay platelet aggregates which widened as a result of polypeptide addition and adsorption before the polymerization, does not permit an obvious explanation of these observations. The best correlation assigns a role to the fractional occupation of the individual intercalation layers of the polypeptides, as the adsorption increases towards a first complete mono-interlayer, then to an incipient and eventually to a complete double layer on to a third interlayer, after which the clay stacking breaks up. Spacings which correspond to an intermediate occupation of any of the three successive interlayers favor amino acids self-addition to polymers. The opposite is true for nearly empty or filled intercalation layers. We hypothesize and describe, how a catalytic activity may derive from c-spacings that offer adsorption sites for the reagent amino acid adenylate within the peripheral recesses of irregularly stacked clay platelets by bringing the anhydride bonds and neutral amino groups into favorable reaction distances. Moderately filled intercalation spaces may also act as sinks for the newly formed oligomers and facilitate the freeing of reaction sites for the occupation by fresh reagent. The c-spacings required for these mechanisms are the result of the intercalation of the preadsorbed polymer, but similar conditions prevail when polymers are adsorbed as they are generated during polymerization.

Adenosine Monophosphate↗
PubMedDate not supplied

Polymeric thiols as enzyme activators of serum creatine phosphokinase.

Several hydrophilic polymeric thiols were prepared from amino-activated polymeric supports by reaction with N-acetylhomocystein ethiolactone. Supports include agaroses, cellulose, Glycophase controlled-pore glass, and Matrex acrylic beads. Thiol content in these polymers was 3-72 mumol SH/g dry polymer. Several were effective solid-phase activators of the sulfhydryl-dependent enzyme creatine phosphokinase at concentrations comparable to that of monomeric thiol required for enzyme activation. The kinetic activation curves for the polymeric and the monomeric (thioglucose) activators were similar, suggesting unhindered interaction of the enzyme with the polymeric activator.

3-Mercaptopropionic Acid↗
PubMed1987

Pyridoxylated polymerized hemoglobin solution processing. Interest of a membrane molecular fractionation step.

Glutaraldehyde hemoglobin polymerization gives too many high polymers, resulting in a too viscous solution. We describe here an alternate method leading to superior results, as compared to the classical one. This method includes a molecular fractionation step using a tangential flow ultrafiltration that secondarily lowers the unpolymerized tetramer's content of a mildly polymerized, pyridoxylated hemoglobin solution (Pyr-Poly Hb). This leads to an adequately polymerized product with a lesser high polymer content, implying a lower viscosity. We thus obtain a pyridoxylated, polymerized molecular fractionated solution presenting suitable features as a blood substitute: A 7.5 g% hemoglobin 2 g% albumin solution had a 16% unpolymerized tetramer's ratio, a 1.8 mPas viscosity, a P50 of 2.8 kPa, a Hill coefficient of 2.1, a binding coefficient of 1.3 mL/g, a colloid osmotic pressure of 2.4 kPa, and a methemoglobin concentration of 3% Male-Sprague-Dawley rats undergoing an isovolumic blood exchange with this Pyr-Poly Hb solution, down to a 2% hematocrit, present a mean survival time of 20 h.

Animals↗
PubMed1997

Acrylamide and carbon disulfide treatments increase the rate of rat brain tubulin polymerization.

Acrylamide and carbon disulfide produce central-peripheral distal axonopathy in experimental animals and humans. The main feature of this disease is the focal swellings containing neurofilaments in distal axons, followed by nerve degeneration beyond these swellings. We studied the possible role of tubulin assembly kinetics in this disease. The rats were either administered acrylamide (50 mg/kg, ip, saline) or exposed to carbon disulfide (700 ppm, 9 h) via inhalation for 12 and 15 d, respectively. Tubulin, purified from both acrylamide-(10.37 +/- 0.3 vs 11.3 +/- 0.15) and carbon disulfide-treated (9.72 +/- 0.5 vs 11.18 +/- 0.25) rat brains showed increase in Vmax (OD/min x 10(3)) of its polymerization. However, only acrylamide treatment showed a decrease in time to Vmax, when brain supernatant was used for tubulin polymerization. In vitro addition of acrylamide (0.1-1 mM) to bovine brain tubulin also showed a decrease in time to Vmax (16-21%) of its polymerization. Carbon disulfide treatment of rats, on the other hand, showed a decrease in MAP-2 and an increase in a 120-kDa peptide concentration. The latter showed immunoreactivity with anti-MAP-2. The increase in the rate of tubulin polymerization by acrylamide and carbon disulfide treatment may alter the rate of transport of axonal constituents, including neurofilament, and contribute toward their accumulation in the focal swellings observed in this neuropathy.

Acrylamides↗
PubMed2003

Modeling the chemistry of plasma polymerization using mass spectrometry.

The goal of the project is a solvent free painting shop. The environmental technologies laboratory is developing processes of plasma etching and polymerization. Polymerized thin films are first-order corrosion protection and primer for painting. Using pure acetylene we get very nice thin films which were not bonded very well. By using air as bulk gas it is possible to polymerize, in an acetylene plasma, well bonded thin films which are stable first-order corrosion protections and good primers. UV/Vis spectroscopy shows nitrogen oxide radicals in the emission spectra of pure nitrogen and air. But nitrogen oxide is fully suppressed in the presence of acetylene. IR spectroscopy shows only C=O, CH(2) and CH(3) groups but no nitrogen species. With the aid of UV/Vis spectra and the chemistry of ozone formation it is possible to define reactive traps and steps, molecule depletion and processes of proton scavenging and proton loss. Using a numerical model it is possible to evaluate these processes and to calculate theoretical mass spectra. Adjustment of theoretical mass spectra to real measurements leads to specific channels of polymerization which are driven by radicals especially the acetyl radical. The estimated theoretical mass spectra show the specific channels of these chemical processes. It is possible to quantify these channels. This quantification represents the mass flow through this chemical system. With respect to these chemical processes it is possible to have an idea of pollutant production processes.

Journal Article↗
PubMed2001

Effect of enzyme impurities on phenol removal by the method of polymerization and precipitation catalyzed by Coprinus cinereus peroxidase.

The removal of phenol by peroxidase-catalyzed polymerization was examined using the Coprinus cinereus peroxidases at different levels of impurity with respect to contamination. The phenol removal efficiency was improved by lowering the peroxidase purity. Acidic and high molecular weight proteins present as impurities in the peroxidase solution had some positive effect on the phenol-polymerizing reaction. The residual enzyme activity, either only in the solution or both in the solution and on the precipitate during the polymerizing reaction, was measured. The results indicate that the main effect of impurities in the peroxidase solution was the suppression of the adsorption of peroxidase molecules on the polymerized precipitate.

Adsorption↗
PubMed1997

GS-164, a small synthetic compound, stimulates tubulin polymerization by a similar mechanism to that of Taxol.

PURPOSE: During our search for new microtubule effectors as anticancer agents, we have found that a small synthetic molecule designated GS-164 interferes with the assembly of porcine microtubule proteins and has cytotoxic activity against a wide range of human tumor cell lines. In this study, we investigated mode of action of the compound in comparison with Taxol and colcemid. METHODS: To gain an insight into the mode of action of GS-164, we used an in vitro microtubule polymerization assay and a flow-cytometric measurement technique. Microtubule organization and the level of tubulin polymerization in HeLa cells were also examined by immunofluorescence microscopy and cytoskeletal protein analyses, respectively. RESULTS: GS-164 stimulated assembly of microtubule proteins in vitro in a concentration-dependent and a GTP-independent manner. Furthermore, as with Taxol, the microtubule polymerization induced by GS-164 was antagonized by podophyllotoxin, a tubulin polymerization inhibitor, and microtubules formed by GS-164 were resistant to disassembly by calcium or low temperatures. GS-164 in the micromolar range arrested the cell cycle of HeLa cells in the mitotic phase leading to cell death. GS-164 also increased the amounts of cellular microtubules in HeLa cells, resulting in the formation of microtubule bundles. CONCLUSION: These results indicate that GS-164 stimulates microtubule assembly by a similar mechanism to that of Taxol. A comparative conformational analysis of GS-164 and Taxol suggested that the structure of the former mimics the minimum essential sites of Taxol required to exert the Taxol-like activities described above. Although the cytotoxicity of GS-164 against human tumor cells was 1000-fold lower than that of Taxol and GS-164 was one-tenth as active as Taxol in vitro, these findings pave the way for synthesizing clinically useful anticancer agents using GS-164 as a lead compound.

Animals↗
PubMed2006

Gamma-radiation induced polymerization of a chiral monomer: a new way to produce chiral amplification.

The treatment of the terpene beta(-)pinene with gamma radiation (at dose level: 150, 300 and 600 kGy) causes its polymerization into a resin and into a dimer. The yield of the resin and of the dimer appears to be linearly dependent to the radiation dose. The structure of the products was studied by FT-IR spectroscopy also in comparison to a reference beta(-)pinene resin prepared by cationic polymerization. A highly ordered structure was found in the case of the radiopolymer in comparison to the resin from cationic polymerization. Polarimetric measurements have shown astonishing enhancement in the optical activity of the radiopolymer and radiodimer in comparison to the starting optical activity of the beta(-)pinene monomer. Also DSC (differential scanning calorimetry) data supports the unexpected highly ordered structure for the beta(-)pinene radiopolymer in comparison to the resin prepared by cationic polymerization. The results have been discussed in terms of amplification of chirality caused by gamma radiation and the implications of this fact on the mechanism of chiral amplification on prebiotic molecules.

Gamma Rays↗
PubMed1986

Polymerization of acrylamide at acid pH using uranyl nitrate.

A new photopolymerizing reagent, uranyl nitrate, is used for the polymerization of acrylamide gels at low pH. The amount of uranyl nitrate (0.2 mg/ml) required for the polymerization of gels at pH 3.0 is considerably less than that of persulfate (7 mg/ml). Use of this reagent obviates the need for the removal of excess of persulfate by preelectrophoresis. The electrophoretic separation of basic proteins in uranium-polymerized gels showed faster movement and better resolution of proteins and proved the gels to be versatile, uniform, and reproducible. Electrophoresis of trypsin in these gels does not affect the enzymatic activity. The catalyst can also be used for the polymerization of gels containing 3 M urea.

Acrylic Resins↗
PubMed1976

Polymeric collagen fibrils. An example of substrate-mediated steric obstruction of enzymic digestion.

Polymeric collagen fibrils have been reacted with fluorescein and rhodamine isothiocyanates to produce fluorescent dye-labelled fibrils, containing seven dye substituents per molecule of tropocollagen within the polymeric collagen fibrils. Two dye-labelled peptides per molecule of tropocollagen were solubilised by trypsin (EC 3.4.21.4) from the telopeptide regions and four dye-labelled peptides were located in the helical regions solubilised by bacterial collagenase (EC 3.4.24.3). The solubilisation of dye-labelled peptides from these insoluble substrates were employed to measure the kinetics of trypsin and collagenase digestion of the telopeptide and helical regions, respectively, of the insoluble polymeric collagen fibrils. These studies demonstrated an apparent excess of enzyme for the readily available substrate under conditions when it was known that a vast excess of substrate existed in the reaction mixture calculated in terms of a molecular ratio. A point of equivalence was established for both trypsin and bacterial collagenase, approximately one enzyme molecule per 870 substrate molecules. On either side of this point the quantity of products formed was controlled by either the enzyme concentration or the substrate concentration. The results can be explained in terms of the inaccessibility of tropocollagen molecules within the molecular architecture of the polymeric collagen fibrils. The external layer of tropocollagen molecules obstruct collagenolytic enzymes penetrating to, and forming enzyme-substrate complexes with, the bulk of the substrate within the interior of the fibrils.

Binding Sites↗
PubMed1975

Kinetic analysis of the polymerization process of actin.

The polymerization process of actin was examined by measuring the amount of flow birefringence and by analyzing release of labeled inorganic phosphate from the bound [gamma-32P]ATP upon polymerization of G-actin to F-actin. Comparison of the above experimental results with the electron microscopic data of Kawamura and Maruyama (J. Biochem., 67, 437-457, 1970) suggested that growth and redistribution steps occurred simultaneously during polymerization. Attempt was made to simulate the polymerization process of actin by calculating the kinetic equations numerically. The results of simulation suggested that it was necessary to take into consideration the association and dissociation between F-actin particles as well as the association and dissociation between F-actin and G-actin.

Actins↗
PubMed1976

Polymerization of protamine sulphate by carbodiimide and interaction of isolated protamine polymers with human red blood cells.

A method using a water-soluble carbodiimide to polymerize protamine sulphate is described. The behaviour of polymerized protamine in Sephadex chromatography and in polyacrylamide gel electrophoresis indicates that protamine has been polymerized into aggregates with defined molecular weights. Turbidimetrical titrations of the isolated protamine polymers with dextran sulphate show that the cationic charge density has been conserved after polymerization. The binding characteristics of the protamine polymers to human red blood cells as measured by cell electrophoresis indicate increased affinity with increased molecular weight of the polymer.

Binding Sites↗
PubMed1979

Some properties of Physarum actinin. A regulatory protein of actin polymerization.

A factor termed Physarum actinin was isolated and partially purified from plasmodia of a myxomycete, Physarum polycephalum. When Physarum actinin was mixed with purified Physarum or rabbit striated muscle G-actin in a weight ratio of about 1 actinin to 9 actin and then the polymerization of G-actin induced, G-actin polymerized to the ordinary F-actin on addition of 0.1 M KCl. However, it polymerized to Mg-polymer on addition of 2 mM MgCl2. The reduced viscosity (etasp/C) of the Mg-polymer was 1.2 dl/g, about one-seventh of that of the F-actin (7.4 dl/g). The sedimentation coefficient of the Mg-polymer was 22.8 S, almost the same as that of the F-actin (29.4 S). The Mg-polymer showed the specific ATPase activity of the order of 1 . 10(-3) mumol ATP/mg actin per min. It was shown that Physarum actinin copolymerized with G-actin to form Mg-polymer on addition of 2 mM MgCl2. The molecular weights of Physarum actinin were about 90 000 in salt-free or slat solutions and 43 000 in a dodecyl sulfate solution. The range of salting out with ammonium sulfate was 50--65% saturation, which was different from that of Physarum actin (15--35% saturation). Physarum actinin did not interact with Physarum myosin or muscle heavy meromyosin. When the weight ratio of actinin to actin increased, the flow birefringence of the formed Mg-polymer decreased, and it became almost zero at the weight ratio of 1 actinin to 5 actin. ATPase activity reached the maximum level (2.2 . 10(-3) mumol ATP/mg actin per min) at the same ratio. On the addition of Physarum actinin to purified Physarum F-actin which had been polymerized on addition of 2 mM MgCl2 the viscosity decreased rapidly, suggesting that the F-actin filaments were broken in the smaller fragments or that they transformed to Mg-polymers. A factor with properties similar to Physarum actinin was isolated from acetone powder of sea urchin eggs.

Actinin↗
PubMed1987

Effects of acetaldehyde on polymerization of microtubule proteins.

The in vitro effects of ethanol and acetaldehyde on polymerization of calf brain microtubular proteins (MTP) were examined. While ethanol up to 100 mM had no effect on the polymerization of MTP, acetaldehyde above 0.5 mM had an inhibitory effect. This effect was not dependent on the presence of microtubule-associated proteins (MAPs), since acetaldehyde had a similar effect on the polymerization of highly purified tubulin. Electron microscopy revealed that the number and the length of microtubules at equilibrium was reduced by the presence of acetaldehyde. Acetaldehyde raised the critical concentration for tubulin assembly and caused greater inhibition at lower tubulin concentrations. Acetaldehyde augmented the depolymerizing effects of Ca2+ on preassembled microtubules. In addition, acetaldehyde itself caused depolymerization of microtubules but only in the absence of MAPs. Long-term (19.5 h) incubation of MTP with acetaldehyde led to significant loss of polymerization ability which could not be reversed by removal of acetaldehyde. This loss of activity was apparently independent of the observed formation of reducible adducts between acetaldehyde and MTP.

Acetaldehyde↗
PubMed1988

Mucus glycoprotein gels. Role of glycoprotein polymeric structure and carbohydrate side-chains in gel-formation.

The structure of mucus glycoprotein gels from the pig gastrointestinal tract was investigated by mechanical spectroscopy. Gastric, duodenal, and colonic mucus had the same mechanical profile, characteristic of a viscoelastic gel. The gel structure collapsed on destruction of the polymeric structure of the component glycoprotein by reduction with 0.2M mercaptoethanol or after proteolysis with papain. The progressive weakening of mechanical properties and the decrease in polymeric glycoprotein content were measured as functions of time of reduction. A linear correlation was obtained between the gel quality [defined by tan delta, the ratio of the loss modulus (G'') to the storage modulus (G')] and the proportion of polymeric to subunit glycoprotein in the mucus. Purified mucus glycoprotein, at the same concentration as that in native mucus, resulted in a gel with mechanical properties no different from those of the respective native secretion, demonstrating that the glycoprotein alone could reproduce the gel-forming properties of mucus. After proteolytic digestion, all native secretions and reconstituted mucus showed an absence of Newtonian behaviour in the frequency dependence of dynamic viscosity at low frequencies. This provided evidence that the noncovalent interactions, characteristic of the native gel matrix, were still present after proteolytic digestion when the nonglycosylated protein core accessible to proteinases had been removed. These results were interpreted to show (a) a common mechanism for gel-formation in gastric, duodenal, and colonic mucus; (b) that the polymeric structure of mucus glycoproteins confers the three-dimensional structure necessary for formation of the gel network; and (c) that noncovalent interactions which arise between the glycoprotein molecules by relatively stable interdigitation of the carbohydrate side-chains are involved in formation of the gel network.

Animals↗
PubMed1986

Occurrence of two beta-tubulin isoforms with different polymerizing abilities in L5178Y cells.

Mouse lymphoma L5178Y cells express at least two isoforms of beta-tubulin, designated M beta I and M beta II, as revealed by isoelectrofocusing, whereas two independently isolated normal T-cell clones, 3D10 and K23, express only M beta I. M beta II-tubulin is more acidic (pI, 5.10) than M beta I-tubulin (pI, 5.15). L5178Y cells were disrupted under the microtubule-stabilizing conditions, followed by centrifugation to separate fractions containing polymerized and unpolymerized tubulin. We found that a proportion of M beta II to total beta-tubulins is larger in the fraction containing unpolymerized tubulin than in that containing polymerized tubulin. In addition, when tubulin was purified from extracts of L5178Y cells by repeated cycles of polymerization-depolymerization, the M beta II-tubulin isoform was gradually lost during the successive purification steps. The low recovery of M beta II-tubulin was observed, irrespective of the presence or absence of MAPs, and even in the presence of an excess amount of essentially polymerizable porcine brain tubulin. These results indicate that M beta II-tubulin is less able to polymerize than is M beta I-tubulin, both in vivo and in vitro.

Animals↗
PubMed1990

Correlation between chemotactic peptide-induced changes in chlorotetracycline fluorescence and F-actin content in human neutrophils: a role for membrane-associated calcium in the regulation of actin polymerization?

Several observations indicate that the triggering event for receptor-mediated actin polymerization takes place in or close to the plasma membrane. Stimulation of human neutrophils with the chemotactic peptide formylmethionyl-leucyl-phenylalanine (fMet-Leu-Phe) causes rapid and transient changes in both chlorotetracycline (CTC) fluorescence and the cellular content of filamentous actin (F-actin), thus suggesting a regulatory role for membrane-bound calcium in actin polymerization. In the present study, tetracaine, a proposed antagonist to membrane-bound calcium, totally inhibited the rebinding of the membrane calcium released by fMet-Leu-Phe. This was accompanied by a magnified and sustained increase in the cellular content of F-actin. In agreement, N-ethylmaleimide, an inhibitor of motile functions, completely abolished the fMet-Leu-Phe-triggered changes in both CTC fluorescence and F-actin content and rapidly reversed the responses when added after the peptide. The tumor promoter phorbol-12-myristate-13-acetate, caused only small changes in CTC fluorescence and F-actin content, and reduced a subsequent fMet-Leu-Phe-induced CTC response and actin polymerization. Inhibition of the breakdown of phosphatidylinositol 4,5-bisphosphate, by calcium depletion, had no significant effects on the fMet-Leu-Phe-induced CTC response and alterations in F-actin content, whereas pretreatment with pertussis toxin totally inhibited both these responses. Consequently, the strong correlation between changes in CTC fluorescence and F-actin content, found in this study, suggests a triggering or modulating role of membrane-associated calcium on actin polymerization in human neutrophils.

Actins↗