Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GOLD”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

Dipole-dipole plasmon interactions in gold-on-polystyrene composites.

Red-shifting of the optical absorption spectra of aggregates of gold nanoparticles by dipole-dipole interactions is of considerable interest, both for theoretical reasons and because the phenomenon can be potentially exploited in various applications. A convenient and practical way to control the effect is to assemble the aggregated ensemble of n gold nanoparticles on the outer surface of larger dielectric spheres. Here, we show by experiment and calculation how the spectra of these structures can be systematically morphed from that of isolated gold particles, through the regime of broad absorption dominated by particle-particle interactions, and finally to the limiting case of a continuous nanoshell. The experimental data were produced using the process of deposition-precipitation, which provides a facile method to decorate polystyrene microspheres with gold nanoparticles. There is no need for prior functionalization of the microsphere surface in our method of deposition-precipitation. Calculations were carried out using a code based on the discrete dipole approximation (DDA). The spectra were dominated by three effects. These were a peak absorption at about 540 nm produced by the conventional plasmon resonance of spherical gold nanoparticles, a broad absorption in the range 600-900 nm caused by diverse dipole-dipole interactions between particles, which strengthened as the number of attached gold particles increased and finally, when n was large, an absorption peak due to the onset of nanoshell-like resonances. The experimental spectra could be successfully fitted by spectra calculated using combinations of these effects.

Journal Article↗

Mechanism of laser-induced size-reduction of gold nanoparticles as studied by nanosecond transient absorption spectroscopy.

Gold nanoparticles with an average diameter of approximately 8 nm (Au approximately 15,000) were irradiated with a tightly focused pulse laser at 355 nm in an aqueous solution of sodium dodecyl sulfate (SDS). Transient absorption spectra of the solution were measured at 25-100 ns after the laser irradiation. The observed transient absorption around 720 nm is assignable to the 2p <-- 1s transition of solvated electrons produced via multiple ionization of the gold nanoparticles. The nascent charge state of the gold nanoparticles was estimated from the transient absorbance. The dependence of the charge state on the SDS concentration shows a gradual increase from approximately +60 to approximately +70 in the 2 x 10(-4) to 3 x 10(-4) M range and an abrupt increase up to approximately +710 at the critical micelle concentration (CMC) of SDS, 8 x 10(-3) M. TEM measurements after laser irradiation reveal that the gold nanoparticles fragment into Au(approximately 1000) at a SDS concentration of 3 x 10(-4) M, whereas they are significantly dissociated into Au(approximately 100) above the CMC. The observed correlation between the nascent charge states and the extent of size reduction of the gold nanoparticles after the laser treatment indicates that the size reduction is caused by the Coulomb explosion of the highly charged gold nanoparticles. The mechanism of laser-induced size reduction is quantitatively discussed based on the liquid drop model.

Journal Article↗

Preparation of supported gold nanoparticles by a modified incipient wetness impregnation method.

In this work, we show that if the mere procedure of impregnation of oxide supports with chloroauric acid, which is well-known to lead to large gold particles, is followed by a step of washing with ammonia, small gold particles (3-4 nm) can be obtained after a treatment of calcination at 300 degrees C on any type of oxide supports (alumina, titania, silica). Moreover, gold leaching is very limited during the washing step, and a large range of gold loadings (0.7-3.5 wt %) can be achieved. Elemental analysis, Raman spectroscopy, and temperature programmed desorption under argon show that this ammonia posttreatment results in the removal of chloride ligands from the coordination sphere of Au(III) precursor and their replacement by ammine ligands, leading to an ammino-hydroxo or an ammino-hydroxo-aquo gold complex and not to gold hydroxide. The Au/TiO(2) catalysts prepared with this modified procedure of impregnation are almost as active as those prepared by deposition-precipitation with urea in the CO oxidation reaction performed at room temperature.

Journal Article↗

Alkanethiol-induced structural rearrangements in silica-gold core-shell-type nanoparticle clusters: an opportunity for chemical sensor engineering.

Electrostatically bonded SiO2.Au nanoparticle clusters form by reaction of 3-aminopropylsilane-modified SiO2 spheres (470 nm) with citrate-coated gold nanoparticles (9.7 nm) in water. Reaction of the clusters with 0.01 M KBr or HCl solution induces desorption of the gold nanoparticles within minutes. Reaction of the clusters with alkanethiols CnH2n+1SH (n = 2-18) at 80 degrees C causes the gold nanoparticles to form stringlike gold nanoparticle structures for thiols with short alkane groups (n = 2, 3, 4) and hexagonally packed arrays of gold nanoparticles for thiols with long alkane groups (n = 5-18) on the silica surfaces. The structural changes indicate that the bonding between Au and SiO2 nanoparticles has changed from electrostatic to van der Waals. Elemental analyses show that the reaction with hexanethiol does not affect the Au/Si/O composition of the SiO2.Au cluster, and Raman spectra on the hexanethiol-reacted cluster indicate the formation of a thiol SAM on the gold nanoparticles. The thiol-reacted SiO2.Au clusters display characteristic shifts of the absorption maxima in the visible spectra, and there is an inverse relation between these shifts and the lengths of the alkyl groups in the thiols. This relationship can be understood in terms of the free electron model for metals. The use of SiO2.Au nanoparticle clusters as coulometric sensors for the qualitative detection of thiols is discussed.

Journal Article↗

Synthesis and reactivity of dimethyl gold complexes supported on MgO: characterization by infrared and X-ray absorption spectroscopies.

Dimethyl gold complexes bonded to partially dehydroxylated MgO powder calcined at 673 K were synthesized by adsorption of Au(CH3)2(acac) (acac is C5H7O2) from n-pentane solution. The synthesis and subsequent decomposition of the complexes by treatment in He or H2 were characterized with diffuse reflectance Fourier transform infrared (DRIFT), X-ray absorption near edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) spectroscopies. The XANES results identify Au(III) in the supported complexes, and the EXAFS and DRIFTS data indicate mononuclear dimethyl gold complexes as the predominant surface gold species, consistent with the lack of Au-Au contributions in the EXAFS spectrum and the presence of nu(as)(CH3) and nu(s)(CH3) bands in the IR spectrum. EXAFS data show that each complex is bonded to two oxygen atoms of the MgO surface at an Au-O distance of 2.16 angstroms. The DRIFT spectra show that reaction of Au(CH3)2(acac) with MgO at room temperature also formed Mg(acac)2 and H(acac) species on the support. Treatment of the dimethyl gold complexes in He or H2 at increasing temperatures varying from 373 to 573 K removed CH3 ligands and caused aggregation forming zerovalent gold nanoclusters of increasing size, ultimately with an average diameter of about 30 angstroms. Analysis of the gas-phase products during the genesis of the gold clusters indicated formation of CH4 (consistent with removal of CH3 groups) and CO2 at 473-573 K, associated with decomposition of the organic ligands derived from acac species. O2 and CO2 were also formed in the decomposition of ubiquitous carbonates present on the surface of the MgO support.

Journal Article↗

Electrocapillary at contact: potential-dependent adhesion between a gold electrode and a mica surface.

Using the electrochemical surface forces apparatus, we investigated adhesion (from pull-off measurements) between gold and mica as the potential of the gold surface was changed externally. Measurements were performed at different concentrations of KClO(4) in a potential window where the gold electrode is ideally polarizable. At applied potentials where the gold-mica interactions are repulsive, we obtain double layer forces that are predictable by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloid stability but deviate from the theory at short range. At applied potentials where the gold-mica interactions are attractive, we observed a very strong dependence of adhesion on the applied potential, a result that cannot be directly related to DLVO theory. We show, however, that an approach based on electrocapillary thermodynamics can be employed to model the potential dependence of adhesion seen in our measurements. This electrocapillary approach presents evidence of charging at the gold-mica interface and stresses the relation between the charge within and outside of the contact area.

Journal Article↗

Immobilization of gold nanorods onto acid-terminated self-assembled monolayers via electrostatic interactions.

We report the immobilization of gold nanorods onto self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid (16-MHA). The simple two step protocol involves formation of a SAM of 16-MHA molecules onto gold-coated glass slides and subsequent immersion of these slides into the gold nanorod solution. The nanorods, formed by a seed-mediated, surfactant-assisted synthesis protocol, are stabilized in solution due to surface modification by the surfactant cetyltrimethylammonium bromide (CTAB). Attractive electrostatic interactions between the carboxylic acid group on the SAM and the positively charged CTAB molecules are likely responsible for the nanorod immobilization. UV-vis spectroscopy has been used to follow the kinetics of the nanorod immobilization. The nature of interaction between the gold nanorods and the 16-MHA SAM has been probed by Fourier transform infrared spectroscopy (FTIR). The surface morphology of the immobilized rods is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements. SEM was also used to determine the density of the immobilized nanorods as a function of the pH of immobilization. Control over the surface coverage of the immobilized gold nanorods has been demonstrated by simple pH variation. Such well-dispersed immobilized gold nanorods with control over the surface coverage could be interesting substrates for applications such as surface-enhanced Raman spectroscopy (SERS).

Journal Article↗

Synthesis of gold nanoparticles from an organometallic compound in supercritical carbon dioxide.

This article presents the synthesis of gold nanoparticles in a single-phase supercritical fluid carbon dioxide solvent. The gold nanoparticles were formed by the reduction of triphenylphosphine gold(I) perfluorooctanoate with dimethylamineborane. Transmission electron microscopy, X-ray photoelectron spectroscopy, and UV-vis spectroscopy reveal the formation of gold nanoparticles of 1 nm in diameter. A high dispersion stability of the gold nanoparticles in supercritical carbon dioxide can be obtained by binding both triphenylphosphine and fluorocarbon ligands on the surface of the gold nanoparticles.

Letter↗

Probing BSA binding to citrate-coated gold nanoparticles and surfaces.

The interaction of bovine serum albumin (BSA) with gold colloids and surfaces was studied using zeta-potential and quartz crystal microbalance (QCM) measurements, respectively, to determine the surface charge and coverage. The combination of these two measurements suggests that BSA binding to gold nanoparticles and gold surfaces occurs by an electrostatic mechanism when citrate is present. The binding of BSA to bare gold is nearly two times greater than the binding of BSA to a citrate-coated gold surface, suggesting that protein spreading (denaturation) on the surface may occur followed by secondary protein binding. On the other hand, binding to citrate-coated gold surfaces can be fit to a Langmuir isotherm model to obtain a maximum surface coverage of (3.7 +/- 0.2) x 10(12) molecules/cm(2) and a binding constant of 1.0 +/- 0.3 microM(-1). The zeta-potential measurements show that the stabilization of colloids by BSA has a significant contribution from a steric mechanism because the colloids are stable, even at their isoelectric point (pI approximately 4.6). To be consistent with the observed phenomena, the electrostatic interactions between BSA and citrate must consist of salt-bridges, for example, of the carboxylate-ammonium type, between the citrate and the lysine on the protein surface. The data support the role of strong electrostatic binding but do not exclude contributions from steric or hydrophobic interactions with the surface adlayer.

Journal Article↗

Synthesis of tetraoctylammonium-protected gold nanoparticles with improved stability.

This paper shows that an introduction of thiosulfate anions in place of bromide anions greatly improves both chemical and thermal stability of tetraoctylammonium-protected gold nanoparticles. Tetraoctylammonium thiosulfate [(Oct)4N+-O3SS]-protected gold nanoparticles are synthesized by the reduction of (Oct)4N+-AuCl4 to Au(I)-SSO3-, followed by the addition of sodium borohydride. The presence of thiosulfate anions instead of bromide anions on the surface of gold nanoparticles results in a significant dampening of the surface plasmon band of gold at 526 nm due to the strong interaction between thiosulfate and the gold nanoparticle surface. Cyanide decomposition and heating treatment studies suggest that (Oct)4N+-O3SS-protected nanoparticles have much higher overall stability compared to (Oct)4N+-Br-protected gold nanoparticles.

Journal Article↗

Edge-spreading lithography: use of patterned photoresist structures to direct the spreading of alkanethiols on gold.

Edge-spreading lithography (ESL) has been extended to fabricate gold structures with different geometries and feature sizes on silicon substrates. In the present variant of ESL, we used photoresist structures patterned on a thin film of gold to transport alkanethiol molecules from an elastomeric stamp to the gold surface where they formed a self-assembled monolayer (SAM) along the edge of each resist feature. The emerging SAM could expand laterally on the gold via reactive spreading, during which the footprints of the resist structures were enlarged in the same fashion. Upon removal of the photoresist, selective etching of gold revealed those regions that were protected by the SAM, yielding accurate outlines of the resist features on the substrate. The width of resultant gold structures was determined by the distance over which the monolayer expanded during spreading, and could be conveniently controlled well below 200 nm by varying the contact time and/or the concentration of alkanethiol in the ink.

Journal Article↗

Photocatalytic deposition of a gold nanoparticle onto the top of a SiN cantilever tip.

We propose a new technique for depositing a gold nanoparticle onto the tip of a dielectric support. We employed the photocatalytic effect of titanium dioxide for the deposition. When the titanium dioxide immersed in a solution including gold ions is subject to optical exposure, the excited electrons in the conduction band reduce gold ions into gold metal. Illumination by an evanescent wave generated with a total reflection configuration limits the deposition region to the very tip. In experiments we obtained 100-300 nm gold particles on SiN cantilever tips for atomic force microscopes. The contrast of evanescent interference fringes measured by a near-field scanning optical microscope with this gold nanoparticle probe has proved to be higher than that with a non-deposited SiN probe by a factor of 1.5.

Journal Article↗

Adiponectin expression is paradoxically increased in gold-thioglucose-induced obesity.

Following the chemically-induced lesion of the ventromedial nucleus, gold-thioglucose treated rodents display hypothalamic leptin resistance, hyperphagia, hyperinsulinemia and obesity. Despite the exuberant hyperinsulinemia following gold-thioglucose treatment, systemic insulin sensitivity is preserved during the early phase of the obesity syndrome, resulting in extensive fat production and markedly increased leptin levels. Leptin and adiponectin levels are inversely associated in vivo. However, the reciprocal relationship between leptin and adiponectin can not be explained by in vitro observations, suggesting the involvement of the central nervous system. We measured leptin and adiponectin expression levels in gold-thioglucose obese and control mice. In this study, we show that gold-thioglucose treatment causes a profound reduction in the number of hypothalamic glucokinase transcripts in rodents. Also, we demonstrate that the adiponectin expression levels and protein content are increased in gold-thioglucose treated animals, which can explain the increased insulin sensitivity during the early phase of the obesity syndrome. Furthermore, as the increased leptin production in gold-thioglucose obese mice is not paralleled by reduced adiponectin production, our data suggest that the inverse regulation between leptin and adiponectin levels is, at least partially, mediated via the hypothalamus.

Adiponectin↗

Flow cytometry for quantification of retrogradely labeled retinal ganglion cells by Fluoro-Gold.

PURPOSE: To count retrogradely labeled retinal ganglion cells by Fluoro-Gold. METHODS: Retinal ganglion cells were retrogradely labeled using bilateral injections of Fluoro-Gold into the superior colliculus. One week after injections, retinas were dissociated and immunolabeled using specific antibody against Fluoro-Gold. The Fluoro-Gold labeled cells were then counted using flow cytometry. RESULTS: Flow cytometry revealed that approximately 7% of the dissociated retinal cells were ganglion cells retrogradely labeled by Fluoro-Gold (Fig. 1B). Based on the total count of retinal cells per eye, the total number of retinal ganglion cells was estimated at approximately 131,250 +/- 2,542 per rat eye. The coefficient of variation of counts was calculated as 1.98%. CONCLUSIONS: The use of flow cytometry facilitates simple, reproducible and rapid quantification of virtually all of the retinal ganglion cells labeled by Fluoro-Gold in a single rat eye.

Animals↗

Fluid retention in Bioplasty Misti Gold II breast prostheses with development of capsular contracture.

We compared the incidence of capsular contracture in an implant (Bioplasty Misti Gold II) which has a textured surface and is filled with polyvinyl-pirrolidone (PVP)-hydrogel, with that in saline-filled implants with textured surfaces when the implants are placed subcutaneously during immediate reconstruction after subcutaneous mastectomy. In 41 patients, mean age 55 years (range 30-81), with breast cancer that was not suitable for breast conservation, 20 patients had 22 Misti Gold II prostheses inserted (two patients bilaterally) and 21 patients had saline-filled prostheses (one patient bilaterally). The development of capsular contracture was assessed using Baker's classification and applanation tonometry. Fourteen patients with Misti Gold II implants were classified one year postoperatively as Baker 2 and 3 compared with five with saline-filled implants (p = 0.01). On applanation tonometry 16 of the Misti Gold II group had an operative:postoperative ratio of < or = 0.75, compared with 50% in the saline-filled group (p = 0.096). In the 12 Misti Gold II prostheses that were removed because of capsular contracture between 13-40 months postoperatively, the volume in the prostheses had increased by 48%. The poor results obtained with the Misti Gold II prosthesis can be explained by the volume that they gained after implantation as a result of osmosis.

Adult↗

Measurement error correction for logistic regression models with an "alloyed gold standard".

Recently, some authors have questioned the validity of methods which correct relative risk estimates for measurement error and misclassification when the "gold standard" used to obtain information about the measurement error process is itself imperfect. When such an "alloyed" gold standard is used to validate the usual exposure measurement, the bias in the "regression calibration" (Rosner et al., Stat Med 1989; 8:1051-69) measurement-error correction factor for relative risks estimated from logistic regression models is derived. This quantity is a function of the correlations of the "alloyed" gold standard (X) and the usual exposure assessment method (Z) with the truth, of the ratio of the variances of X and Z, and of the correlation between the errors in the "alloyed" gold standard and the errors in the usual exposure assessment method. In this paper, it is proven that if the errors between Z and X are uncorrelated, the regression calibration method has no bias even when the gold standard is "alloyed." When a third method of exposure assessment is available and it is reasonable to assume that the errors in this method are uncorrelated with the errors in the other two exposure assessment methods, point and interval estimates of the correlation between the errors in X and Z are derived. These methods are illustrated here with data on the measurement of physical activity, vitamins A and E, and poly- and monounsaturated fat. In addition, when a third exposure assessment method is available, a modification of standard regression calibration is derived which can be used to calculate point and interval estimates of relative risk that are corrected for measurement error in both X and Z. This new method is illustrated here with data from the Health Professionals Follow-up Study, a study investigating the associations between physical activity and colon cancer incidence and between vitamin E intake and coronary heart disease. It is shown that in these examples, correlations of the errors in X and Z tended to be small. Even when moderate, estimates of relative risk corrected for error in both X and Z were not very different from the estimates which assumed that X was a true gold standard.

Bias↗

Gold tracer studies of muscle regeneration.

Rabbits were injected with soluble gold, and cold injury was inflicted upon their extraocular muscles. Following the typical freeze-thaw damage in which the myofiber basement membrane is preserved, a polymorphonuclear granulocyte exudation occurred. At this stage only a few interstitial cells with long processes contained gold. At one and two days abundant mononuclear cells with gold were observed at the site of injury. In subsequent stages of muscle regeneration the amount of tracer decreased but myoblasts, and even fully formed myotubes, often contained detectable gold. Some data on "in vivo" gold salt kinetics and the specificity of gold localization were utilised in the study of the relation between mononuclear interstitial cells and myoblasts.

Animals↗

Application of digital image analysis and flow cytometry to enumerate marine viruses stained with SYBR gold.

A novel nucleic acid stain, SYBR Gold, was used to stain marine viral particles in various types of samples. Viral particles stained with SYBR Gold yielded bright and stable fluorescent signals that could be detected by a cooled charge-coupled device camera or by flow cytometry. The fluorescent signal strength of SYBR Gold-stained viruses was about twice that of SYBR Green I-stained viruses. Digital images of SYBR Gold-stained viral particles were processed to enumerate the concentration of viral particles by using digital image analysis software. Estimates of viral concentration based on digitized images were 1.3 times higher than those based on direct counting by epifluorescence microscopy. Direct epifluorescence counts of SYBR Gold-stained viral particles were in turn about 1.34 times higher than those estimated by the transmission electron microscope method. Bacteriophage lysates stained with SYBR Gold formed a distinct population in flow cytometric signatures. Flow cytometric analysis revealed at least four viral subpopulations for a Lake Erie sample and two subpopulations for a Georgia coastal sample. Flow cytometry-based viral counts for various types of samples averaged 1.1 times higher than direct epifluorescence microscopic counts. The potential application of digital image analysis and flow cytometry for rapid and accurate measurement of viral abundance in aquatic environments is discussed.

Cyanobacteria↗