Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DISINFECTANTS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources

[Skin disinfectants for nerve blocks and their long-lasting antimicrobial effects].

Although epidural catheterization has many advantages in anesthesia and in the treatment of acute pain, spinal epidural abscess is a serious complication after the procedure. Since it is presumed that the epidural space is contaminated by bacteria on the skin via the space around the catheter, it seems important to clarify bacterial re-growth after application of skin disinfectant. Therefore, bacterial growths on human back 1, 2 days, and 1 week after application of disinfectants were studied in summer and winter to elucidate whether there are differences between the two seasons. Four disinfectants, 0.5% chlorhexidine in 80% ethyl alcohol (CA), 0.2% benzalkonium in 80% ethyl alcohol (BA), 10% povidone iodine (PI), and 80% ethyl alcohol (EA) were applied on the back of 76 adult healthy volunteers, and the specimens were taken by agar-contact method. The frequencies of positive cultures for bacteria were higher in summer than in winter. The frequencies of positive culture in summer after the applications of CA, BA, PI, and EA were as follows, respectively: 50%, 20%, 5%, and 40% after 1 day; 47%, 50%, 60%, and 50% after 2 days; and 82%, 82%, 70%, and 64% after 1 week. In winter, these frequencies after the application of CA, BA, PI, and EA were as follows, respectively: 0%, 0%, 18%, and 18% after 1 day; 5%, 26%, 32%, and 58% after 2 days; and 21%, 21%, 32%, and 42% after 1 week. We conclude that when an epidural catheter is in situ, more frequent skin disinfection has to be carried out, preferably by CA, in summer than in winter, since the presence of sweat on the back seems to hasten the re-growth of bacteria.

Abscess↗

[Changes of the elastomer impression materials after their immersion in some disinfection agents for AIDS infection control purposes].

In achieving infection control in the dental office and the dental laboratory it has been suggested that impressions made in the dental office should be disinfected before they are send to the dental laboratory. In this study we examined the solubility and the linear changes of some elastomer impression materials after their immersion in disinfection agents after ten, twenty and forty minute time intervals. The disinfection agents used were: 75% alcohol, domestic chlorine 10%, the agent sterile pack (isopropyl alcohol) and 2% activated glutaraldehyde (SIDEX). Water was used as control. Our findings show that all types of elastomer impression materials appear to suffer insignificant changes both linear and weight-wise but polyether impression materials show significant changes in almost all the disinfection agents that were used and the time intervals that were studied.

Acquired Immunodeficiency Syndrome↗

[Public health-microbiological evaluation of housekeeping combinations for cleaning and disinfecting bed pans in the hospital].

For prophylaxis of infection in hospital and for staff care protection the bed pans used by hospital patients should be disinfected. Nowadays this is done mostly thermically in automatic disinfection systems. In Germany there is no regulation for the hygienic-microbiological check-up of these machines. The routine testing method for disinfection machines of bed pans is demonstrated. Under hygienic-microbiological aspects the technical procedures in disinfection machines are described and explained.

Bacteriological Techniques↗

[Effect of disinfection on linear and dimensional stability of impression materials].

Given the potential for transfer of pathogenic microorganisms from dental impressions, a method for surface disinfection of impressions is needed to prevent spread of infection by way of impressions and casts made from them. The effects of disinfectant solutions on the impression materials linear and dimensional stability to prevent viral infections are investigated in this article. For this purpose, irreversible hydrokolloid and silicon rubber base impression materials and five disinfectant solutions were used. No apparent linear and dimensional change could be detected after 30 minute immersion in any of the disinfectants tested.

Dental Impression Materials↗

[The influence of disinfectants on colloidal impression materials and dental stones].

In view of prophylaxis against hospital infections, following tests were performed: Two kinds of alginate impression materials (ALGIACE and Aligix-S) and two kinds of agar impression materials (CARTRIILLOID and RUBBERLLOID) were immersed for 30 minutes in the following six kinds of disinfectants; 0.1% benzethonium chloride (benzethonium), 1% chlorhexidine gluconate (hexidine), 1% chlorhexidine gluconate added with surfactants (hexidine surfactant), 1% sodium hypochlorite (hypochlorous acid), 2% glutaraldehyde (glutaral) and 1% formaldehyde (formalin). Changes in size of the impression materials with time were then measured. Three kinds of dental stones (SHIMOMURA DENTAL PLASTER, NEW PLASTONE and SURSTONE) were infused into the impression surfaces after treatment with disinfectants, and the surface roughness and hardness of the yielded surfaces of the samples were measured. The results obtained are as follows: 1) As to ALGIACE, although the rates of changes in size lay within the range of +/- 0.3% when immersed in hexidine, hexidine surfactant and hypochlorous acid, the infusion of either one of SHIMOMURA DENTAL PLASTER, NEW PLASTONE or SURSTONE into the impression showed an effect on the stone surface. 2) As to Algix-S, the rate of changes in size lay within the range of +/- 0.3% when immersed in all the disinfectants, and the influsions of NEW PLASTONE and SURSTONE after immersing in benzethonium, hexidine surfactant and glutaral gave a slight effect on the stone surface. 3) As to CARTRILLOID, the rates of change in size lay within the range of +/- 0.3% except for the immersion in hexidine; the influsion of SHIMOMURA DENTAL PLASTER into the impression, the influsion of NEW PLASTONE after immersing in benzethonium and formalin and the influsions of NEW PLASTONE and SURSTONE after immersing in glutaral gave a slight effect on teh stone surface. 4) As to RUBBERLLOID, the rates of changes in size lay within the range of +/- 0.2% when immersed each disinfectant; the influsion of SHIMOMURA DENTAL PLASTER after immersing in hypochlorous acid and that of either one of SHIMOMURA DENTAL PLASTER, NEW PLASTONE or SURSTONE after immersing in benzethonium, glutaral and formalin gave a slight effect on the stone surface.

Calcium Sulfate↗

[Patch test of mercury compounds and disinfectant solutions and the clinical picture of mercury contact dermatitis].

The results of patch tests with mercury compounds and disinfectant solutions as well as the clinical picture of mercury contact dermatitis are presented and discussed. During the period from Nov. 1983 to Dec. 1986, 686 patients were tested with mercury compounds. During the 13 year period from 1974-1986, 118 patients were tested with disinfectant solutions and 59 patients with mercury contact dermatitis were seen. Among the disinfectant solutions tested, the highest incidence of positive reaction, 11.5%, was obtained with thimersal. Cross sensitization has been shown between mercurochrome and ammoniated mercury, but no statistical correlation existed that demonstrated cross sensitization between mercury and thimerosal until our study. Therefore, the allergen in mercurochrome contact dermatitis is mercury. No statistical correlation could be established between the occurrence of atopic dermatitis and the patch test reactions to mercury compounds. The contactants were mercurochrome, thimerosal, and broken thermometers in 49 out of 59 cases of mercury contact dermatitis. Consequently, the number of occurrence of mercury dermatitis can be reduced by the elimination of the use of these two disinfectant solutions and the substitution of electric thermometers for mercury thermometers.

Adolescent↗

Contact lens disinfection to prevent transmission of viral disease.

Current FDA standards for contact lens disinfecting systems require that viricidal activity be demonstrated against just one strain of herpes simplex virus, type 1. Small and nonenveloped viruses (e.g., adenoviruses) may be more resistant to disinfection than herpes simplex virus (HSV); however, the efficacy of disinfection systems against these other agents is not routinely tested. Currently approved methods of chemical and thermal lens disinfection do appear to be efficient means to inactivate HSV and the human immunodeficiency virus, both of which have lipid envelopes.

Acquired Immunodeficiency Syndrome↗

Regression analysis of use-dilution disinfectant test data as an alternative to current registration practices.

The historical application of probit analysis applied to the use-dilution disinfectant test is discussed. Attention is focused on earlier work which either deleted or incompletely applied confidence limits leading to much current controversy in disinfectant test interpretation. It is proposed that the probit analysis approach applied to disinfectants is indeed feasible and that a more complete application of confidence limits to the assay will yield more reliable data than those currently required for disinfectant product registration with the Environmental Protection Agency. A suggested modified registration protocol using probit analysis is offered as an alternative to the current registration guidelines.

Disinfectants↗

[The use of UV rays for the disinfection of water. I. Microbiologic studies of drinking water].

As a physical disinfection method without chemicals required the ultraviolet irradiation was tested for disinfection of drinking water. The survival was measured as a function of exposure to radiation for S. enteritidis, E. cloacae, C. freundii, S. marcescens, E. coli, K. pneumoniae und S. faecium. The bacteria were grown in trypton soya broth until they were well into the exponential phase. Two different UV-disinfection units were tested. Both consist of cylindrical shaped chambers with one low-pressure mercury-discharge lamp with their longitudinal axis parallel to the chambers. With 10(6) cfu/ml the experiments were done with three different rates of flow of 7,2 m3/h, 4,0 m3/h and 2,0 m3/h. The minimum exposures to radiation necessary to cause a 99.999% reduction were 10-86 mWs/cm2 depending on the test bacterium and on the UV-disinfection unit. The minimum doses ranged for S. enteritidis up to 13 mWs/cm2, for E. coli up to 21 mWs/cm2, for K. pneumoniae up to 39 mWs/cm2, for S. faecium up to 42 mWs/cm2, for E. cloacae up to 43 mWs/cm2, for C. freundii up to 72 mWs/cm2, and for S. marcescens up to 86 mWs/cm2.

Bacteria↗

[Rapid disinfection of surfaces with a chlorine-releasing scouring agent].

Experiments using artificially contaminated tile-surfaces, broth as well as an artificial soil based on flavour and raw egg as suspension medium for the test-microorganisms (S. aureus, E. coli, P. aeruginosa and C. albicans) resulted in marked inoculum reductions by the following cleaning and disinfection method: a thick, fluid and Chlorine releasing scouring agent was spread onto wetted surface, the surface wiped clean and left for 10 min before being rinsed with tap water. This procedure lead within few minutes to germ reductions similar to those achieved within one or more hours by disinfections with aldehyde based compounds or other well established disinfectants. This fact should be kept in mind when discussing old and new procedures for disinfection of surfaces.

Candida albicans↗

[The emission of toxic ingredients from disinfectant solutions into the air].

The development of peracidous disinfectants allows a disinfection, inactivating an incomparable large spectrum of microorganisms and showing special advantages of toxicology. There is no release of evaporable toxic substances into the air after disinfection with the exception of products based on peracetic acid. In this paper cell cultures are chosen as indicator for the toxicity of evaporable substances. It is shown that the cells were able to propagate in the presence of active oxygen containing disinfectants as well as in the blanc test. However, there was no propagation of cells in presence of formaldehyde, glutardialdehyde and peracetic acid.

Cell Division↗

[Bactericidal activity of disinfectants against certain bacterial strains of S. aureus].

The bactericidal activity of twenty disinfectants against S. aureus was evaluated by a suspension and capacity test. The effect of interfering substances (organic matter and hard water) on the activity of these disinfectants was investigated by a number of experimental trials. The sensibility of S. aureus to sodium laurylsulfate and zinc pyrithione was affected by proteins. The interference of proteins was not evident for the other disinfectants. The polyvinylpyrrolidone-iodine 7% and the cresol saponatum tolerated the presence of proteins in distilled water, but they were influenced by them in hard water; on the contrary, the zinc pyrithione was more active in hard water than in distilled water. Generally, the second and third incremental addition of microorganisms did not practically alter the bactericidal effect of the majority of disinfectants.

Disinfectants↗

Acanthamoeba-contaminated hydrogel contact lenses. Susceptibility to disinfection.

Acanthamoeba keratitis has frequently been associated with contact lens use. In this study, contaminated hydrogel contact lenses of patients were subjected to disinfection by thermal hydrogen peroxide and chemical (quaternary ammonium) systems. New hydrogel contact lenses contaminated by incubation on Acanthamoeba polyphaga plates were similarly subjected to the disinfection systems described above. Thermal disinfection was universally effective in eradicating acanthamoeba, whereas hydrogen peroxide and quaternary ammonium disinfection were ineffective. Scanning electron microscope photomicrographs suggest that acanthamoeba may adhere to surfaces of hydrogel contact lenses. These findings have significant implications for soft contact lens users.

Acanthamoeba↗

[Testmethod for the evaluation of procedures for the hygienic disinfection of hands. Part 1: Discription of testmethod (author's transl)].

A detailed test design for the evaluation of procedures for the hygienic disinfection of hands is described together with suitable methods for statistical analysis of the results. In principle the release of testbacteria from the finger-tips of artificially contaminated hands is measured before and after disinfection. A procedure under test is accepted if it is not less effective than a standard-disinfection procedure. As such the disinfection with iso-propanol 60% (ml/ml) applied through 1 min was agreed upon. This standard procedure is to be performed the same day with the same day with the same testpersons and under identical environmental conditions prior to the procedure under test.

1-Propanol↗

[Comparison of efficacy of 14 procedures for the hygienic disinfection of hands (author's transl)].

The efficacy of 14 procedures for the hygienic disinfection of hands mostly with commerical preparations was tested by a new experimental model developed at the Institute of Hygiene of the university Vienna (1,3). The disinfectant power was clearly dependent on the duration of treatment as well as on the kind of alcohol used in the preparation (n-Propanol better than iso-Propanol better than Ethanol). After one minute the efficacy of all preparations containing one of the three alcohols as active agent was well comparable to that of the standard procedure which according to our proposal (5) uses iso-Propanol 60% (ml/ml) for 1 minute. For preparations with n-Propanol as the main active agent (Satinazid and Sterillium) this was true even after treatment for a period as short as 0.5 min. In our opinion disinfecting detergents are out of place for hygienic disinfection of hands. One preparation representing this group (Versuchspräparat A) was far less effective than the standard procedure.

1-Propanol↗

Disinfection of metal and plastic pelvic specula in general practice.

One hundred and sixteen general practices in Wellington were surveyed about their use and disinfection of gynaecological specula. Two thirds of the practices used metal specula which were adequately disinfected by boiling for at least one hour. Of the 46 practices that used plastic specula, only four always disposed of them, as recommended, after use. Aldehyde or halogen disinfectants which are effective against all important sexually-transmitted disease (STD) organisms were used by only 13 of the 42 practices that recycled specula. The remaining 29 practices used quaternary ammonium or diguanide disinfectants which may not be effective against all STD organisms.

Disinfection↗

Hospital disinfection and antibiotic policies.

A disinfectant policy should provide information on all types of disinfectants and on procedures for their use. Requirements for chemical disinfection are mainly limited to cleaning areas of contaminated spillage, decontamination of certain heat-labile instruments e.g. fiberscopes, and disinfection of the skin. Antibiotic policies are necessary to ensure rationalization of therapy, to prevent the emergence of resistance, to limit or control the use of toxic agents and avoid the unnecessary use of costly agents. Hospitals should provide a list of freely available antibiotics and introduce varying restrictions on others. A short guide to therapy, especially prophylaxis, should be provided for the medical staff.

Anti-Bacterial Agents↗

Risk of wound and pelvic infection after laparoscopic tubal sterilization: instrument disinfection versus sterilization.

To determine if disinfection, rather than sterilization, of laparoscopic equipment leads to an increase in the risk of postlaparoscopy infection, the authors analyzed data from a multicenter prospective study conducted by the Centers for Disease Control on the safety of sterilizing operations. From September 1978 through July 1981, 3903 women underwent laparoscopic tubal sterilization procedures in which the equipment was sterilized with ethylene oxide (58%) or disinfected with glutaraldehyde (42%). The overall risk of wound infection in each group was 1.5 per 100 women. The relative risk of wound infection for disinfection versus sterilization of the equipment was 0.5 when adjusted for differences in the two groups. The corresponding relative risk of pelvic infection was 1.2. These results suggest that laparoscopy equipment disinfected with glutaraldehyde is not associated with an increased risk of wound or pelvic infection compared with equipment sterilized with ethylene oxide.

Adolescent↗