Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
PubMed2005

Functional properties of edible agar-based and starch-based films for food quality preservation.

Edible films made of agar (AG), cassava starch (CAS), normal rice starch (NRS), and waxy (glutinous) rice starch (WRS) were elaborated and tested for a potential use as edible packaging or coating. Their water vapor permeabilities (WVP) were comparable with those of most of the polysaccharide-based films and with some protein-based films. Depending on the environmental moisture pressure, the WVP of the films varies and remains constant when the relative humidity (RH) is >84%. Equilibrium sorption isotherms of these films have been measured; the Guggenheim-Anderson-de Boer (GAB) model was used to describe the sorption isotherm and contributed to a better knowledge of hydration properties. Surface hydrophobicity and wettability of these films were also investigated using the sessile drop contact angle method. The results obtained suggested the migration of the lipid fraction toward evaporation surface during film drying. Among these polysaccharide-based films, AG-based film and CAS-based film displayed more interesting mechanical properties: they are transparent, clear, homogeneous, flexible, and easily handled. NRS- and WRS-based films were relatively brittle and have a low tension resistance. Microstructure of film cross section was observed by environmental scanning electron microscopy to better understand the effect of the structure on the functional properties. The results suggest that AG-based film and CAS-based films, which show better functional properties, are promising systems to be used as food packaging or coating instead of NRS- and WRS-based films.

Agar↗
PubMed2005

Variation in concentrations of the fungicides tebuconazole and dichlofluanid following successive applications to greenhouse-grown lettuces.

Residual levels and degradation rates of tebuconazole and dichlofluanid in lettuce plants grown in a greenhouse under agricultural conditions typical of northwestern Spain were studied. Lettuce plants were sprayed four times with a homogeneous 0.2% aqueous solution of Folicur Combi (wettable powder containing 40% dichlofluanid and 10% tebuconazole) at a rate of 2500 g/ha. Samples were collected 1, 5, and 9 days after the first two applications and at times ranging from 1 to 27 days after the last two applications. All samples were stored in a refrigerator at 4 degrees C. Fungicide levels were determined by solid-liquid extraction (SLE) followed by gas chromatography and mass spectrometry detection (GC-MSD). Recovery was good for tebuconazole (98%) but low for dichlofluanid (29%); precision was good (<10% for both analytes), and quantification limits were low (<1.5 mg/kg). Seven days after the last application, dichlofluanid levels were below the maximum allowed limit established in Spain (10 mg/kg), but tebuconazole levels were above the corresponding limit (5 mg/kg). Tebuconazole concentration dynamics was accurately fitted by zeroth- or combined first- and zeroth-order models (depending on variety), but modeling of the behavior of dichlofluanid was less satisfactory, probably due to its instability.

Agriculture↗
PubMed2004

Bacterial ghost technology for pesticide delivery.

Bacterial ghosts are nondenaturated empty cell envelopes of Gram-negative bacteria produced by E-mediated lysis. Such envelopes from the plant-adhering bacterium Pectobacterium cypripedii were tested for their ability to adhere to plant material and to be used as carriers for pesticide delivery. We show, using fluorescence-labeled P. cypripedii ghosts, that depending on the target plants 55 or 10% (rice or soya, respectively) of the applied bacterial ghosts was retained on the leaves after heavy simulated rain (84 mm). Furthermore, the bacterial ghosts could be loaded with the lipophilic triazole fungicide tebuconazole. In subsequent plant experiments in the glass house, the efficacy of the loaded bacterial ghost for resistance to rainfall and the protective and curative effects against the pathogens Erysiphe graminis, Leptosphaeria nodorum, and Pyrenophora teres on barley and wheat and against Sphaerotheca fuliginea on cucumber were tested. The bacterial ghosts were compared primarily with a commercial tebuconazole formulation, a wettable powder, as it has similar physical characteristics. The comparison revealed similar effects and showed consistently higher or comparable efficacy against the pathogens. The standard operational comparison with the most protective, cereal specific emulsion of oil in water displayed that the bacterial ghosts had equal to or lower efficacy than the emulsion. This study confirmed the potential of bacterial ghost platform technology as a new alternative carrier system for pesticides.

Bacteria↗
PubMed1999

Effect of temperature and humidity on the formation of dibutylurea in benlate fungicide.

Benomyl [methyl 1-(butylcarbamoyl)-2-benzimidazolecarbamate] is the active ingredient in DuPont Benlate fungicides. The formation of N, N'-dibutylurea (DBU), a phytotoxic degradation product of benomyl, in Benlate formulations was evaluated by analyzing Benlate samples maintained under simulated storage conditions and assessing the effects of temperature and humidity on sample moisture content, benomyl degradation, and the rate of DBU formation. Benomyl degraded during storage by the elimination of n-butylisocyanate (BIC) to form methyl 2-benzimidazole carbamate (MBC; carbendazim). Liberated BIC could then proceed to react with water to form DBU (first-order rate constant of 8.4 x 10(-)(4) s (-)(1)). The degradation of benomyl and subsequent formation of DBU were dependent on the temperature and highly dependent on the humidity of the storage environment. At the lower humidity storage conditions the rates of DBU formation were significantly higher in the dry flowable (DF) formulation than in the wettable powder (WP) formulation. The initial moisture content of Benlate DF samples was higher than those of Benlate WP samples, although the Benlate WP samples absorbed more moisture upon incubation. These results may yield insight on the appearance of high levels of DBU found in some boxes and bags of Benlate DF and Benlate WP formulations.

Benomyl↗
PubMed2001

Synthesis of a series of oligo(ethylene glycol)-terminated alkanethiol amides designed to address structure and stability of biosensing interfaces.

A strategy for the synthesis of a series of closely related oligo(ethylene glycol)-terminated alkanethiol amides (principally HS(CH(2))(m)CONH(CH(2)CH(2)O)(n)H; m = 2, 5, 11, 15, n = 1, 2, 4, 6, 8, 10, 12) and analogous esters has been developed. These compounds were made to study the structure and stability of self-assembled monolayers (SAMs) on gold in the prospect of designing new biosensing interfaces. For this purpose, monodisperse heterofunctional oligo(ethylene glycols) with up to 12 units were prepared. Selective monoacylation of the symmetrical tetra- and hexa(ethylene glycol) diols as their mesylates with the use of silver(I) oxide was performed. The synthetic approach was based on carbodiimide couplings of various oligo(ethylene glycol) derivatives to omega-(acetylthio) carboxylic acids via a terminal amino or hydroxyl function. SAM structures on gold were studied with respect to thickness, wettability (water contact angles approximately 30 degrees ), and conformation. A good fit was obtained for the relation between monolayer thickness (d) and the number of units in the oligo(ethylene glycol) chain (n): d = 2.8n + 21.8 (A). Interestingly, the corresponding infrared spectroscopy analysis showed a dramatic change in conformation of the oligomeric chains from all-trans (n = 4) to helical (n > or = 6) conformation. A crystalline helical structure was observed in the SAMs for n > 6.

Journal Article↗
PubMed2005

Contact angle saturation in electrowetting.

Electrowetting is the phenomenon of contact angle decrease under the influence of an external voltage applied across the solid/liquid interface. Electrowetting offers an interesting possibility to enhance the wettability of hydrophobic materials without altering the chemical composition of the system and thus could be incorporated in various microfluidic devices. Electrowetting is fundamentally an electrocapillary effect occurring on an insulated solid electrode (hence the change of the solid/liquid interfacial tension with voltage follows Lippmann's equation). A limiting contact angle value larger than zero is achieved even at very large external voltages. Saturation precludes full wetting of the substrate and restricts the magnitude of the capillary force variation. Contact angle saturation has been given various interpretations (e.g., charge trapping, air ionization) but appears to reflect a natural thermodynamic limit rather than being simply a defective property. The limiting value of the contact angle is given by the Young equation when the value of the solid/liquid interfacial tension reaches zero. The model is in excellent agreement with our own results and often gives an adequate description of published data. It also suggests that the saturation limit is determined by the material properties of the system and electrowetting at voltages exceeding this threshold is essentially a nonequilibrium process.

Electrochemistry↗
PubMed2005

Stable superhydrophobic surface via carbon nanotubes coated with a ZnO thin film.

We report the formation of a stable superhydrophobic surface via aligned carbon nanotubes (CNTs) coated with a zinc oxide (ZnO) thin film. The CNT template was synthesized by chemical vapor deposition on an Fe-N catalyst layer. The ZnO film, with a low surface energy, was deposited on the CNT template by the filtered cathodic vacuum arc technique. Contact angle measurement reveals that the surface of the ZnO-coated CNTs is superhydrophobic with water contact angle of 159 degrees . Unlike the uncoated CNTs surface, the ZnO-coated CNTs surface shows no sign of water seepage even after a prolonged period of time. The wettability of the surface can be reversibly changed from superhydrophobicity to hydrophilicity by alternation of ultraviolet (UV) irradiation and dark storage.

Hydrophobic and Hydrophilic Interactions↗
PubMed2005

Photochemically patterned poly(methyl methacrylate) surfaces used in the fabrication of microanalytical devices.

We report here the photochemical surface modification of poly(methyl methacrylate), PMMA, microfluidic devices by UV light to yield pendant carboxylic acid surface moieties. Patterns of carboxylic acid sites can be formed from the micrometer to millimeter scale by exposure of PMMA through a contact mask, and the chemical patterns allow for further functionalization of PMMA microdevice surfaces to yield arrays or other structured architectures. Demonstrated here is the relationship between UV exposure time and PMMA surface wettability, topography, surface functional group density, and electroosmotic flow (EOF) of aqueous buffer solutions in microchannels made of PMMA. It is found that the water contact angle on PMMA surfaces decreases from 70 degrees to 24 degrees after exposure to UV light as the result of the formation of carboxylic acid sites. However, upon rinsing with 2-propanol, the water contact angle increases to approximately 80 degrees , and this increase is attributed to changes in surface roughness resulting from removal of low molecular weight PMMA formed from scission events. In addition, the surface roughness and surface coverage of carboxylic acid groups exhibit a characteristic trend with UV exposure time. Electroosmotic flow (EOF) in PMMA microchannels increases upon UV modification and is pH dependent. The possible photolysis mechanism for formation of carboxylic acid groups on PMMA surfaces under the conditions outlined in this work is discussed.

Carboxylic Acids↗
PubMed2006

Controlled amine functionality in self-assembled monolayers via the hidden amine route: chemical and electronic tunability.

A synthetic strategy for fabricating a dense amine functionalized self-assembled monolayer (SAM) on hydroxylated surfaces is presented. The assembly steps are monitored by X-ray photoelectron spectroscopy, Fourier transform infrared- attenuated total reflection, atomic force microscopy, variable angle spectroscopic ellipsometry, UV-vis surface spectroscopy, contact angle wettability, and contact potential difference measurements. The method applies alkylbromide-trichlorosilane for the fabrication of the SAM followed by surface transformation of the bromine moiety to amine by a two-step procedure: S(N)2 reaction that introduces the hidden amine, phthalimide, followed by the removal of the protecting group and exposing the free amine. The use of phthalimide moiety in the process enabled monitoring the substitution reaction rate on the surface (by absorption spectroscopy) and showed first-order kinetics. The simplicity of the process, nonharsh reagents, and short reaction time allow the use of such SAMs in molecular nanoelectronics applications, where complete control of the used SAM is needed. The different molecular dipole of each step of the process, which is verified by DFT calculations, supports the use of these SAMs as means to tune the electronic properties of semiconductors and for better synergism between SAMs and standard microelectronics processes and devices.

Journal Article↗
PubMed2006

A novel carbon electrode material for highly improved EDLC performance.

Porous materials, developed by grafting functional groups through chemical surface modification with a surfactant, represent an innovative concept in energy storage. This work reports, in detail, the first practical realization of a novel carbon electrode based on grafting of vinyltrimethoxysilane (vtmos) functional group for energy storage in electric double layer capacitor (EDLC). Surface modification with surfactant vtmos enhances the hydrophobisation of activated carbon and the affinity toward propylene carbonate (PC) solvent, which improves the wettability of activated carbon in the electrolyte solution based on PC solvent, resulting in not only a lower resistance to the transport of electrolyte ions within micropores of activated carbon but also more usable surface area for the formation of electric double layer, and accordingly, higher specific capacitance, energy density, and power capability available from the capacitor based on modified carbon. Especially, the effects from surface modification become superior at higher discharge rate, at which much better EDLC performance (i.e., much higher energy density and power capability) has been achieved by the modified carbon, suggesting that the modified carbon is a novel and very promising electrode material of EDLC for large current applications where both high energy density and power capability are required.

Journal Article↗
PubMed2006

Fabrication of highly antireflective silicon surfaces with superhydrophobicity.

Highly antireflective porous silicon surfaces with superhydrophobicity were obtained by means of chemical etching and fluoroalkylsilane self-assembly. The results show that wettability and reflectivity of these surfaces strongly depend on the etching method and the resultant surface morphology. All of the four resultant porous silicon surfaces by alkaline etching, acidic etching, thick Pt-assisted acidic etching, and thin Pt-assisted acidic etching can reduce reflectance, but the efficiency differs greatly. Except for the alkaline etching, the porous silicon surfaces produced by the other three etching methods can reach superhydrophobicity after fluoroalkylsilane modification. These differences are due to the different surface morphology and roughness. Moreover, the porous silicon surface produced by thin Pt-assisted acidic etching presents abundant holes and particles with diameters ranging from nanometers to submicrometers. This morphology enables the porous silicon surface to own a very low reflectance value that is averaged to be about 3% over the whole experimental photon wavelength spanning 300-800 nm.

Journal Article↗
PubMed2006

Self-organization of carbon nanotubes in evaporating droplets.

Here, we report a simple and efficient way for organizing carbon nanotubes, in particular, single-wall carbon nanotubes (SWNTs) into ordered structures from their dilute solutions. It was found that drying a droplet of carbon nanotube solution at room temperature on a wettable surface such as glass or silica wafer led to redistribution, accumulation, and organization of carbon nanotubes along the perimeter of the droplet. Unlike the aggregation behaviors of colloid nanoparticles, anistropic carbon nanotubes tended to show two orientations in a ring deposit: one parallel to the outer perimeter of the ring and the other normal to it in the interior. Drying droplets of SWNT solutions at high temperatures exhibited a long-range ordered structure. In addition, droplet drying may cause size separation of carbon nanotubes and pattern formation through interactions between droplets. This result helps us not only to further understand fluid dynamics during the drying process but also to provide a promising and simple strategy for either assembling carbon nanotubes on a surface or organizing them into well-aligned films and fibers.

Journal Article↗
PubMed2006

Adsorption of glucose oxidase onto plasma-polymerized film characterized by atomic force microscopy, quartz crystal microbalance, and electrochemical measurement.

Adsorption of glucose oxidase (GOD) onto plasma-polymerized thin films (PPF) with nanoscale thickness was characterized by atomic force microscopy (AFM), quartz crystal microbalance (QCM), and electrochemical measurements. The PPF surface is very flat (less than 1-nm roughness), and its properties (charge and wettability) can be easily changed while retaining the backbone structure. We focused on three types of surfaces: (1) the pristine surface of hexamethyldisiloxane (HMDS) PPF (hydrophobic and neutral surface), (2) an HMDS PPF surface with nitrogen-plasma treatment (hydrophilic and positive-charged surface), and (3) an HMDS PPF surface treated with oxygen plasma (hydrophilic and negative-charged surface). The AFM image showed that the GOD molecules were densely adsorbed onto surface 2 and that individual GOD molecules could be observed. The longer axis of GOD ellipsoid molecules were aligned parallel to the surface, called the "lying position", because of electrostatic association. On surface 1, clusters of GOD molecules did not completely cover the original PPF surface (surface coverage was ca. 60%). The 10-nm-size step height between the GOD clusters and the PPF surface suggests that the longer axes of individual GOD molecules were aligned perpendicular to the surface, called the "standing position". On surface 3, only a few of the GOD molecules were adsorbed because of electrostatic repulsion. These results indicate that the plasma polymerization process can facilitate enhancement or reduction of protein adsorption. The AFM images show a corresponding tendency with the QCM profiles. The QCM data indicate that the adsorption behavior obeys the Langmuir isotherm equation. The amperometric biosensor characteristics of the GOD-adsorbed PPF on a platinum electrode showed an increment in the current because of enzymatic reaction with glucose addition, indicating that enzyme activity was mostly retained in spite of irreversible adsorption.

Adsorption↗
PubMed2006

Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties.

Dual function of self-cleaning and antireflection can be created in double-layered TiO2-SiO2 nanostructured films. The film were prepared by (1) layer-by-layer deposition of multilayered SiO2 nanoparticles with polydiallyldimethylammonium (PDDA) cations, (2) layer-by-layer deposition of multilayered titanate nanosheets with polications on PDDA/SiO2 multilayer films, and (3) burning out the polymer and converting titanate nanosheets into TiO2 by hearing at 500 degrees C. The as-prepared films, consisting of a porous SiO2 bottom layer and a dense TiO2 top layer, improved the transmittance of glass or quartz substrates, as demonstrated by transmission spectra collected at normal incidence. The photocatalytic properties of the films were studied by the change of the water contact angle together with the decay of the IR absorption of the hydrocarbon chain of octadecylphosphonic-acid-modified films under 2.6 mW cm-2 UV illumination. Both the antireflective and the photocatalytic properties of the films were dependent on the number of PDDA/nanosheet bilayers deposited. however, excellent surface wettability of the films for water was obtained, independent of the preparation conditions. The experimental findings are discussed in terms of the special structure of the double-layered nanostructured film.

Catalysis↗
PubMed2006

Self-organized microporous structures based on surfactant-encapsulated polyoxometalate complexes.

Self-organized microporous structures based on a series of surfactant-encapsulated polyoxometalate complexes (SECs) have been prepared by using ordered condensed droplets as a template. Among these structures, ordered honeycomb structures were obtained and characterized in detail by taking (DODA)(12)H[Eu(SiW(11)O(39))2] (SEC-1) as an example. Optical microscope, atomic force microscopic, and scanning electron microscopic measurements confirmed the formation of three-dimensional microporous structure, in which the top surface shows a highly ordered honeycomb structure. As compared to common solvent-casting films, the corresponding honeycomb films are more hydrophobic and possess more ordered lamellar structures. Both the wettability and the size of SECs exert significant influence on the formation of microporous structures. The proper hydrophobicity of SECs was proposed to be an essential factor for the formation of honeycomb films, and large-sized SECs are favorable for the fabrication of highly ordered honeycomb structures. The conditions for the formation of different surface morphologies have been discussed in terms of the contact angle of SECs at the interface between water and chloroform, and a contact angle slightly greater than 90 degrees is found to be a prerequisite for the formation of honeycomb structures. The results reported in this paper not only help to further comprehend the mechanism of the formation of honeycomb structures, but also provide some guidance for the design of ordered microporous films based on organic/inorganic hybrid materials, exemplified by the organic/nanoparticle complexes.

Journal Article↗
PubMed2004

Mixed alkanethiol self-assembled monolayers as substrates for microarraying applications.

In current microarraying experiments, data quality is in large part determined by the quality of the spots that compose the microarray. Since many microarrays are made with contact printing techniques, microarray spot quality is fundamentally linked to the surface characteristics of the microarray substrate. In this work, surface coatings, consisting of self-assembled monolayers (SAMs) of mixed alkanethiol molecules, were used to control the surface properties of the microarray substrate. X-ray photoelectron spectroscopy and equilibrium contact angle measurements were performed in order to confirm the chemical content and wettability of these surface coatings. To test their performance in microarraying applications, sample microarrays were printed on these mixed alkanethiol films and then characterized with a noncontact visual metrology system and a fluorescence scanner. This work demonstrates that utilizing mixed alkanethiol SAMs as a surface coating provides spatially homogeneous surface characteristics that are reproducible across multiple microarray substrates as well as within a substrate. In addition, this paper demonstrates that these films are stable and robust as they can maintain their surface characteristics over time. Overall, it is demonstrated that SAMs of mixed alkanethiols serve as a useful surface coating, which enhances spot and therefore data quality in microarraying applications.

Alkanes↗
PubMed2004

Assembly of colloidal particles by evaporation on surfaces with patterned hydrophobicity.

Drops containing suspended particles are placed on surfaces of patterned wettability created using soft lithography; the drop diameter is large compared to the dimensions of the patterns on the substrate. As the three-phase contact line of the drop recedes, spontaneous dewetting of the hydrophobic domains and flow into the hydrophilic domains create discrete fluid elements with peripheries that can mimic the underlying surface topography. Suspended particles are carried with the fluid into the wetted regions and deposit there as the discrete fluid domains evaporate. If particle volume fractions are sufficiently high, the entire wetted domain can be covered with colloidal crystals. At lower volume fractions, flow within the evaporating fluid element can direct the deposition of colloidal particles at the peripheries of the domains. High-resolution arrays of particles were obtained with a variety of features depending upon the relative size of the wetting regions to the particles. When the wetting region is larger than the particles, three-dimensional and two-dimensional arrays of ordered particles mimicking the shape of the wetting pattern form, depending on the particle volume fraction. For lower volume fractions, one-dimensional (1-D) arrays along the wet/non-wet boundaries form. When the particle size is similar to the height of fluid on the wetted domain, zero-dimensional distributions of single particles centered in the wet regions can form for wetted squares or 1-D distributions (stripes) form along the axis of striped domains. Finally, when the wetting region is smaller than the particle size, the particles do not deposit within the features but are drawn backward with the receding drop. These results indicate that evaporation on surfaces of patterned wetting provides a highly parallelizable means of tailoring the geometry of particle distributions to create patterned media.

Journal Article↗
PubMed2004

Structure of microparticles in solid-stabilized emulsions.

Emulsions of oil and water stabilized by adsorbed solid particles are known as solid-stabilized emulsions (often referred to as Pickering emulsions). Using confocal microscopy, we have studied the assembly of colloidal-sized polystyrene particles in poly(dimethylsiloxane)-in-water solid-stabilized emulsions. Monodisperse polystyrene particles, when included in the emulsions at low concentrations, were found to form small patches with local "hexagonal" order, separated by other particle-free domains. Polystyrene particles with different sizes (1 and 4 microm) and different wettability could simultaneously segregate to the emulsion interface; even mixtures of hydrophobic and hydrophilic solid particles were found to simultaneously segregate to the same interface.

Letter↗