Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Stearates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
PubMed1990

Intraperitoneal free fatty acids induce severe hypocalcemia in rats: a model for the hypocalcemia of pancreatitis.

Indirect evidence suggests a causative role for intraperitoneal free fatty acids (FFA) in hypocalcemia associated with pancreatitis. We examined the effects of intraperitoneal injection of four naturally occurring FFAs on serum calcium in rats. Two saturated FFAs, stearate and palmitate, induced little or no hypocalcemia. Two unsaturated FFAs, oleate and linoleate, caused dramatic hypocalcemia in treated versus control rats (6.3 +/- 1.4 and 5.3 +/- 0.7 mg/dl, respectively, versus 10.1 +/- 0.6). Dose-response studies demonstrated that minute quantities of oleate (100 microliters per 250 g rat) caused marked hypocalcemia (7.2 +/- 0.3 mg/dl). Treated versus control rats also revealed a decrease in ionized calcium (3.15 +/- 0.2 versus 5.6 +/- 0.05 mg/dl) and magnesium (1.4 +/- 0.15 versus 2.0 +/- 0.10), an appropriate increase in PTH levels (1670 +/- 451 versus 396 +/- 235 pg/ml), and a fall in calcitonin levels (70.4 +/- 21.3 versus 47.5 +/- 16.4 pg/ml) but no change in albumin or phosphate levels. In vitro, the Ksp of calcium dioleate was shown to be 5.3 x 10(-8) m3/liter3; thus under physiologic conditions 100 microliters oleate binds 7.2 mg calcium, or approximately twice the total ECF ionized calcium in the rat. The amounts of intraperitoneal FFA that can easily be achieved in pancreatitis complex pathophysiologically significant amounts of calcium and may lead to severe hypocalcemia.

Animals↗
PubMed1991

Effect of ascorbic acid esters on hepatic glutathione levels in mice treated with a hepatotoxic dose of acetaminophen.

Acetaminophen (APAP) with or without ascorbyl stearate (AS) or ascorbyl palmitate (AP) was administered by gavage to male Swiss-Webster mice at a dose of 600 mg/kg for each chemical. The biochemical markers of hepatotoxicity, serum transaminases (serum glutamate pyruvate transaminase [SGPT], serum glutamate oxaloacetic transaminase [SGOT]) and serum isocitrate dehydrogenase (SICD) activities were monitored after APAP and APAP + AP or AS dosing. There were significant reductions in serum transaminase and SICD activities in the APAP- + ascorbate ester-treated animals as compared to APAP-positive controls. Oral coadministration of APAP with AP or AS did not prevent the initial hepatic GSH depletion (15 min-4 hr postdosing). However, hepatic GSH content began to rise in the APAP + AS or AP-treated animals at 4 hr and reached control values within 12 hr postdosing. Urinary mercapturate conjugates were also significantly higher in the APAP + AP or AS-treated animals as compared to APAP alone when measured over a 60-min postdosing period. Plasma sulfobromophthalein (BSP) retention was approximately eight times higher in APAP-treated animals as compared to the APAP + ascorbate ester treatments indicating maintenance of hepatic excretory functions in presence of AP or AS. Prior depletion of hepatic GSH by diethyl maleate (DEM) did not alter hepatoprotective effects of AP or AS in the presence of APAP. Hepatic ascorbate levels also peaked at 4 hours after APAP + AP or AS treatments. The possible role of L-ascorbic acid esters in GSH regeneration following co-administration of a hepatotoxic dose and APAP is discussed.

Acetaminophen↗
PubMed1987

Arachidonic acid, stearic acid, and diacylglycerol accumulation correlates with the loss of phosphatidylinositol 4,5-bisphosphate in cerebrum 2 seconds after electroconvulsive shock: complete reversion of changes 5 minutes after stimulation.

The effects of electroconvulsive shock (750 msec, 130 V, 150 pps) on the endogenous content of rat cerebral lipids were studied 2, 5, 10, 20, 30, 60, and 300 sec after stimulation. Rapid enzyme inactivation in situ was attained by high-power head-focused microwave irradiation (6.5 kW, 2450 MHz). At 10 sec, phosphatidylinositol 4,5-bisphosphate (PIP2) mass had decreased by 249 nmol per g wet wt, mainly due to loss of arachidonate and stearate. At the same time, the stearoyl-arachidonoyl glycerol accumulated, although to a lesser extent than the loss exhibited in PIP2. Changes in phosphatidylinositol and in phosphatidylinositol 4-phosphate mass were not statistically significant. Free fatty acids and diacylglycerols accumulated to 395 nmol per g wet wt; arachidonic and stearic acids composed 322 nmol of these lipids. Hence, the reduction in content of PIP2 is sufficient to account for 80% of the increases in free fatty acid and diacylglycerol mass. Thirty-three and 12 nmol of accumulated free palmitic and docosahexaenoic acids, respectively, are not accounted for by the loss of PIP2. Sixty seconds after stimulation, PIP2 content returned to 90% of control levels, while diacylglycerol tended to remain below control levels. Free fatty acids had not returned to control levels by 60 sec, with the exception of docosahexaenoic acid. At 300 sec, PIP2, diacylglycerol, and free fatty acids had all returned to control levels.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed1988

Developing rod photoreceptors from normal and mutant Rd mouse retinas: altered fatty acid composition early in development of the mutant.

The phospholipid and fatty acid contents of developing rod photoreceptor cells were determined in dissociated photoreceptor cells obtained from normal mice and from rd mice exhibiting an inherited retinal degeneration. Photoreceptors were dissociated from retinas by mechanical agitation after mild protease treatment and characterized by light and electron microscopy. Phospholipid classes were isolated by thin-layer chromatography, and fatty acyl groups separated and quantitated by capillary gas-liquid chromatography. Developing photoreceptor cells of normal retinas accumulated all phospholipid classes, but in proportions which shifted with age. The mole % contents of phosphatidylcholine (PC) and phosphatidylinositol (PI) decreased with age, whereas phosphatidylethanolamine (PE) and phosphatidylserine (PS) increased. The content of the polyunsaturated fatty acid docosahexaenoate (22:6), expressed as nmol/microgram lipid phosphorus, increased rapidly during development, whereas arachidonate (20:4) content tended to decline. Mono-unsaturated fatty acid levels (palmitoleate, 16:1; oleate, 18:1) declined with age. Among saturated fatty acids, palmitate (16:0) decreased during normal development, whereas stearate (18:0) increased. The total mass of phospholipid/photoreceptor cell in the normal, adult mouse retina was estimated to be approximately 14 pg. The total phospholipid content and mole % distribution of individual phospholipid classes in immature rd photoreceptors were similar to values for normal cells. In contrast, significant changes in fatty acid composition were detected between immature rd cells and normal cells. Rd cells generally had higher levels of saturated (myristate, 14:0; palmitate, 16:0) and monounsaturated fatty acids (oleate, 18:1) and lower levels of polyunsaturated fatty acids (arachidonate, 20:4; docosahexaenoate, 22:6), suggesting that fatty acid metabolism is altered by expression of the rd gene and/or by the associated impairment of photoreceptor cell differentiation.

Animals↗
PubMed1989

Changes in free fatty acids, phospholipids, and cholesterol following impact injury to the rat spinal cord.

Free fatty acids (FFA), phospholipid, and cholesterol levels were measured in spinal cord samples from rats subjected to low (25 g-cm), moderate (50 g-cm), or severe (100 g-cm) impact trauma to the T10 spinal segment. All degrees of injury caused early (15 min) declines in total phospholipids after trauma; phospholipid levels remained significantly below controls in rats subjected to moderate and severe injuries for up to 3 days, whereas phospholipids had returned to baseline values by 4 hr in the low injury group. Rapid and persistent decreases in cholesterol levels were observed for all injury groups. Severe trauma was associated with biphasic increases in FFA levels: levels were elevated at 5 and 15 min post-trauma and had declined by 30 min; a second elevation was observed at 1 hr, progressively increasing to reach a maximum at 24 hr, before declining over the next 6 days. Low and moderate injuries caused similar early total FFA increases; later increases were significantly smaller than in the severely injured group. Among the free fatty acids, significant increases were observed in palmitate, stearate, oleate, linoleate, linolenate, arachidonate, and docosahexaenoate. These findings indicate that traumatic spinal cord injury results in early, transient, postinjury membrane phospholipid hydrolysis, the magnitude of which is relatively independent of the severity of injury. More delayed and sustained lipid hydrolysis also occurs after trauma, the magnitude of which is related to the severity of injury.

Animals↗
PubMed1977

[Physiology and biochemistry of streptomycetes. VIII. Esterase activity and production of turimycin in cultures of Streptomyces hygroscopicus JA 6599].

Esterase in cell-free extracts of Streptomyces hygroscopicus JA 6599 has a temperature-optimum of 35 degrees C, a pH-optimum with p-nitrophenylacetate as substrate at pH 7.7--8.1, with alpha-naphthylacetate at pH 7--9. Michaelis constants in cell-free extracts: with alpha-naphthylacetate Km = = 0.71 mM, with p-nitrophenylacetate Km = 0.21 mM. Phenylesters were better hydrolyzed than naphthylesters, phenylacetate was best hydrolyzed; beta-naphthylacetate was better hydrolyzed than alpha-naphthylacetate. Among the naphthylesters the ester of propionic acid was hydrolyzed best. Caprylate, stearate, and 0,0-diethyl-0-(p-nitrophenyl)-phosphate inhibit the splitting of alpha-naphthylacetate. A comparison with esterases of other biological origin shows that the enzyme studied can be a carboxylesterase (E.C.3.1.1.1.). In cultures of JA 6599 V13 and JA 6599-6 the change of esterase activity during the fermentation was determined. We found a carrelation between the enzymatic activity and the antibiotic-concentration in the culture medium.

Acetates↗
PubMed2002

Development of polymer film dosage forms of lidocaine for buccal administration: II. Comparison of preparation methods.

In previous studies, we prepared film dosage forms of lidocaine (LC) with hydroxypropylcellulose (HPC) as a film base using the solvent evaporation (SE) method. However, from the viewpoint of environmental issues, a reduction in organic solvent use in pharmaceutical and other industries is required. In this study, we prepared the LC films by direct compression of the physical mixture (DCPM method) and direct compression of the spray dried powder (DCSD method). Magnesium stearate, which was required as a lubricant for direct compression, showed no effect on the LC release rate. The LC release rate (%/h) was independent of the compression pressure, but a higher pressure was preferable to easily remove the film from the punches. An increase in the film weight decreased the LC release rate expressed in %/h, whereas no significant effect of film weight was observed on the LC release rate from unit surface area expressed in mg/h/cm(2). The LC release rate (%/h) was independent of the LC content, suggesting that the LC release rate (mg/h) can be quantitatively controlled by changing the LC content in the formulation. The LC release rate and penetration rate were affected by the preparation method; that is, DCPM method < DCSD method < SE method. The LC penetration rates through excised hamster oral mucosa were linearly correlated to the release rate of un-ionized LC, which was estimated by the LC release rate multiplied by the un-ionized fraction of LC for the HPC film dosage form.

Administration, Buccal↗
PubMed2003

Characterization of physical mixtures and directly compressed tablets of sulfamerazine polymorphs: implications on in vitro release characteristics.

The present study evaluates the effects of excipients, compression pressure, and relative humidity (RH) on the stability of sulfamerazine polymorphs (referred here as SMZ I and SMZ II) and their release from directly compressed tablets using differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and dissolution analysis. SMZ I and SMZ II tablets were compressed with magnesium stearate (MGST), and microcrystalline cellulose (MCC) at 5000, 7500, and 10,000 lbs. pressures and stored at 40, 75, 95, and 100% RH conditions for 5 weeks. There were indications of possible drug-excipient interaction in the binary mixtures under different relative humidity conditions from the DSC data, but they could not be confirmed by PXRD because the crystal structures of the drug and excipients remained unaltered. The crystal structures of the polymorphs in the tablet also remained unaltered under the above conditions. There were, however, significant differences observed in the drug release properties of the two polymorphs. SMZ II was found in general to have a higher rate of drug release than SMZ I. Extensive gelation of MCC under higher moisture conditions, compression pressure during tableting, and inherent tabletability of the sulfamerazine crystals were factors that affected drug release. All these factors contributed towards prolonging the disintegration and deaggregation of the tablet particles and were therefore concluded to be the rate limiting steps for the dissolution process.

Anti-Infective Agents↗
PubMed2003

Inverse gas chromatography: considerations about appropriate use for amorphous and crystalline powders.

The use of inverse gas chromatography to assess surface properties of a range of pharmaceutical powders was examined. The powders were two sources of hydroxy propylmethyl cellulose (HPMC), microcrystalline cellulose, magnesium stearate, and acyclovir. These were selected to cover a range for properties from amorphous to crystalline, hydrophilic to hydrophobic, and high to low aqueous solubility. It was found that many powders gave a similar value for the dispersive surface energy, which is surprising given the differences in chemical nature. It is likely that this is due to the use of infinite dilution giving rise to the study of specific regions of the powder surface only. The values obtained for dispersive energies were not influenced by packing mass or flow rate of the carrier gas. The retention of polar probes on the column was a concern for the amorphous HPMC samples. This gave rise to derived values for acid-base nature which varied depending on sample mass and carrier gas flow rate. The data show that care must be taken when studying amorphous samples for which it is possible to obtain diffusion into the material rather than just surface adsorption of probes. Despite these problems, it was still possible to differentiate between the samples (including differences between the two HPMC samples) by use of polar probes. It was also possible to see differences in absorption into the sample, reflecting the different physical forms. For example, microcrystalline cellulose behaved very differently to HPMC. It can be concluded that inverse gas chromatography is a valuable characterization tool, but it must be used with care especially with respect to polar probes on amorphous samples.

Acyclovir↗
PubMed2004

Intrinsic adhesion force of lubricants to steel surface.

The intrinsic adhesion forces of lubricants and other pharmaceutical materials to a steel surface were quantitatively compared using Atomic Force Microscopy (AFM). A steel sphere was attached to the tip of an AFM cantilever, and its adhesion forces to the substrate surfaces of magnesium stearate, sodium stearyl fumarate, lactose, 4-acetamidophenol, and naproxen were measured. Surface roughness varied by an order of magnitude among the materials. However, the results clearly showed that the two lubricants had about half the intrinsic adhesion force as lactose, 4-acetamidophenol, and naproxen. Differences in the intrinsic adhesion forces of the two lubricants were insignificant. The lubricant molecules were unable to cover the steel surface during AFM measurements. Intrinsic adhesion force can slightly be modified by surface treatment and compaction, and its tip-to-tip variation was not greater than its difference between lubricants and other pharmaceutical particles. This study provides a quantitative fundamental basis for understanding adhesion related issues.

Adhesiveness↗
PubMed2004

The influence of excipients on drug release from hydroxypropyl methylcellulose matrices.

The influence of commonly used excipients, spray-dried lactose (SDL), microcrystalline cellulose (MCC), and partially pregelatinized maize starch (Starch 1500) on drug release from hydroxypropyl methylcellulose (HPMC, hypromellose) matrix system has been investigated. A model formulation contained 30%w/w drug, 20%w/w HPMC, 0.5%w/w fumed silica, 0.25%w/w magnesium stearate, and 49.25%w/w filler. Chlorpheniramine maleate and theophylline were used as freely (1 in 4) and slightly (1 in 120) water-soluble drugs, respectively. It was found that for both drugs, addition of 20 to 49.25%w/w Starch 1500 resulted in a significant reduction in drug release rates compared to when MCC or SDL was used. The study showed that using lactose or microcrystalline cellulose in the formulations resulted in faster drug release profiles. Partially pregelatinized maize starch contributed to retardation of both soluble and slightly soluble drugs. This effect may be imparted through synergistic interactions between Starch 1500 and HPMC and the filler actively forming an integral part within the HPMC gel structure.

Chemistry, Pharmaceutical↗
PubMed2004

Determination of P-glycoprotein inhibition by excipients and their combinations using an integrated high-throughput process.

Excipients often used in pharmaceutical formulations have been reported to have inhibitory effects on P-glycoprotein, an important membrane-associated transport protein. Because inhibition of efflux transporters can have an effect on drug bioavailability, identification of these excipients and their extent of inhibition are therefore important for pharmaceutical development. We have developed an automated and integrated high-throughput process for identifying these excipients and their combinations. Common excipients containing polyethylene glycol (PEG) in the chemical structure were screened using a cytotoxic cell growth assay, and excipients giving inhibition were further combined to identify synergistic effects. Our screens identified excipients previously reported to inhibit P-glycoprotein, such as PEG stearates, PEG fatty acid esters, polysorbates, and poloxamers. We also found new excipients, such as those in the PEG glyceryl fatty acid family, which were among the best inhibitors identified. Dose-response studies of these compounds and of cyclosporin A indicated that the extent of inhibition depended logarithmically on the concentration. This suggests a similar mechanism by which inhibition is obtained, despite widely varying chemical structures. In the particular set of combinatorial studies performed, which involved >20,000 samples, we found that inhibitory effects in binary combinations followed the single-excipient logarithmic trend, rather than being synergistic. These experiments showcased the potential for integrated high-throughput processes that enable combinatorial screens which would otherwise be difficult to perform manually.

ATP Binding Cassette Transporter, Subfamily B, Mem↗
PubMed2006

Prediction of tablet hardness based on near infrared spectra of raw mixed powders by chemometrics.

The purpose of this research is to elucidate the effect of lubricant mixing on tablet hardness by near-infrared (NIR) chemometrics as a basic study of process analytical technology. Formulation cellulose (F-C) consisted of sulpyrine (SP), microcrystalline cellulose (MC), and magnesium stearate (MgSt). Formulation lactose/starch (F-L) consisted of SP bulk drug powder, spray-dried lactose (SL), corn starch (CS), and MgSt. First, F-L and F-C without MgSt were mixed in a twin-shell mixer for 60 min. MgSt was added to the mixed powder, and was mixed for various mixing times, after which the mixed powders were compressed by 8-mm diameter punch and die. NIR spectra of raw mixed powders of F-L and F-C were taken using a reflection type of Fourier transform NIR spectra spectrometer, and chemometric analysis was performed using principal component regression (PCR). The tablet hardnesses of F-L and F-C decreased with increasing mixing time. All NIR spectra of the mixed powders of F-L and F-C fluctuated depending on mixing time. In order to predict tablet hardness before tablet compression, NIR spectra of F-L and F-C mixed powders were analyzed and evaluated for hardness by PCR. The minimum standard error of cross-validation values could be realized by using five- and six-principal component models, respectively. In the cases of F-L and F-C, the relationships between the actual and predicted tablet hardnesses showed straight lines, respectively. In the regression vectors of F-L and FC, the peaks related to hydrogen groups of SP, CS, and MC appeared as positive peaks. In contrast, the peaks related to hydrocarbon due to MgSt appeared as negative peaks in the regression vectors. The calibration models to evaluate the tablet hardness were obtained based on NIR spectra of raw mixed powders by PCR. This approach to predicting tablet hardness prior to compression could be used as a routine test to indicate the quality of the final product without spending time and energy to produce samples of questionable quality.

Cellulose↗
PubMed1975

Hydrolysis of fatty acid esters of acetaminophen in buffered pancreatic lipase systmes I.

A series of fatty acid esters of acetaminophen were prepared beginning with acetate, the propionate, and all even-numbered fatty acids and going through the octadecanoate. The enzymatic hydrolysis of all derivatives was studied in vitro with varying amounts of lipase assed to the hydrolysis mixtures. Under the conditions of the in vitro hydrolysis, it was observed that all derivatives were hydrolyzed more readily in an aqueous medium at pH 7.8. A positive relationship was seen between the hydrolysis rates and the concentration of lipase at this pH. There was a negative relationship between the chain length of the acyl moiety and the corresponding hydrolysis rates. The short chain esters were hydrolyzed at rates many times more rapid than the long chain esters. The intermediate chain-lenght ester, p-acetamidophenyl decanoate, p-acetamidophenyl laurate, and p-acetamidophenyl myristate, were hydrolyzed at intermedediate time periods extending over 12 hr, approaching completion at 97.5, 87.5, and 80.5%, respectively, when 18 Wilson units of lipase was used in each milliliter of hydrolysis mixture. The longer chain esters, p-acetamidophenyl palmitate and p-acetamidophenyl stearate, were hydrolyzed to the extent of 16 and 8%, respectively, over 12 hr under the same in vitro conditions.

Acetaminophen↗
PubMed1976

Influence of hydrophobic materials on dissolution of a nondisintegrating hydrophilic solid (potassium chloride).

A nondisintegrating hydrophilic solid was covered with coatings of hydrophobic materials as a model to study their influence on dissolution rates. Both solution and sublimation techniques were satisfactory for producing coatings of stearic acid. Only a sublimation method was applicable to magnesium stearate, but the resulting coating consisted mainly of a pyrolysis product, stearone. Reductions in dissolution rates in a continuous-flow system could best be interpreted by assuming that they reflected changes in the area of the hydrophilic solid exposed to the solvent. This concept is based on the assumptions that the intrinsic dissolution rate of uncoated potassium chloride did not change and that no dissolution occurred from coated areas. The most important factors controlling the dissolution rate were the strength of attachment of the hydrophobic coat to the surface of the hydrophilic substrate and the thickness of the coat.

Ketones↗
PubMed1976

Effect of storage at specified temperature and humidity on properties of three directly compressible tablet formulations.

Direct compression tablets containing sodium starch glycolate, an alginate derivative, or povidone as a disintegrant, magnesium stearate as a lubricant, amaranth as a tracer, and dibasic calcium phosphate dihydrate as the matrix were stored for 30 days at 23 degrees and 75% relative humidity (R.H.), 45 degrees and 75% R.H., and 65 degrees and 40% R.H. Samples were evaluated after 0, 10, 20, and 30 days for size, hardness, and dissolution characteristics. Although no significant changes in the dimensions or hardness of the three tablet formulations, prepared at three different compaction pressures, were observed, the dissolution efficiency of the systems showed significant changes, some systems dissolving more rapidly and some more slowly after storage. In some cases, the changes were so substantial as to indicate the possibility of significant changes of the bioavailability of drugs formulated in such systems. The relevance of this work to the problem of evaluating aging effects on the physical properties of tablets is discussed.

Drug Stability↗
PubMed1976

Effect of nonionic surfactants on percutaneous absorption of salicylic acid and sodium salicylate in the presence of dimethyl sulfoxide.

Fifteen nonionic surfactants, 10% (w/w), were each incorporated into white petrolatum USP ointment base containing 10% (w/w) salicylic acid or 11.6% (w/w) sodium salicylate with 10% (w/w) dimethyl sulfoxide. Percutaneous absorption was determined from blood salicylate levels in New Zealand white rabbits at regular intervals for 8 hr following application of the ointment. Percutaneous absorption of salicylic acid was increased significantly when sorbitan monopalmitate, sorbitan trioleate, poloxamer 231, poloxamer 182, polyoxyethylene 4 lauryl ether, polyoxyethylene 2 oleyl ether, or polyoxyl 8 stearate was added to the ointment containing dimethyl sulfoxide, salicylic acid, and white petrolatum. Percutaneous absorption of sodium salicylate was increased significantly when sorbitan monolaurate, sorbitan monopalmitate, or poloxamer 182 was added to the ointment containing dimethyl sulfoxide, sodium salicylate, and white petrolatum.

Animals↗
PubMed1977

Surface tension lowering and dissolution rate of hydrocortisone from solid solutions of selected n-acyl esters of cholesterol.

The dissolution of hydrocortisone into simulated intestinal fluid from lipid delivery systems followed second-order kinetics. As the ratio of hydrocortisone to lipid was increased from 1:1 to 1:6, the dissolution rate decreased. Solvent deposition of solid solutions of hydrocortisone and lipid on lactose resulted in the enhancement of the dissolution rate. For the 1:1 hydrocortisone-lipid solid solutions, the rank order of the dissolution rate was hydrocortisone-cholesteryl stearate, hydrocortisone, hydrocortisone-cholesterol, hydrocortisone-cholesteryl acetate, hydrocortisone-cholesteryl palmitate, hydrocortisone-cholesteryl n-butyrate, hydrocortisone-cholesteryl laurate, and hydrocortisone-cholesteryl n-decylate. A direct correlation was found between the dissolution rate of hydrocortisone and the surface tension lowering of simulated intestinal fluid by the corticoid and various lipids.

Chemical Phenomena↗