Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Porosity”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
PubMed1994

A novel skeletal drug-delivery system using self-setting calcium phosphate cement. 4. Effects of the mixing solution volume on the drug-release rate of heterogeneous aspirin-loaded cement.

The effect of the mixing solution volume was investigated on the in vitro drug-release rate of a novel drug-delivery device based on a self-setting bioactive calcium phosphate cement containing aspirin as a model drug. Equimolar mixtures of metastable calcium phosphate powders containing various proportions (3-40 w/w %) of seed hydroxyapatite crystals transformed into hydroxyapatite after being mixed with dilute phosphoric acid. The drug release from cement pellets in vitro into a 0.1 mol/L phosphate buffer at pH 7.40 and 37 degrees C by the rotating disk method continued for more than 1 week. The drug-release rate from the cement increased with increasing volumes of mixing solution. The relationship between the liquid/powder ratio and the porosity of the cement was a straight line, indicating that the cement porosity depended on the amount of the mixing solution, but was independent of the amount of seed crystals. Drug release from the cement followed the modified Fick's law, with the rate increasing with the amount of mixing solution, since the porosity depended on the amount. The tortuosity of the cements was estimated from the modified Fick's equation, and the relationships between the drug release rate and the tortuosity of the pore in the drug-loaded cement in the plots were nonlinear. The results suggested that the drug-release rates from the cement were controlled by the drug diffusion in the pores.

Aspirin↗
PubMed1995

1H-NMR microscopy of tablets.

A 1H-nuclear magnetic resonance (NMR) microscopy method was utilized for the first time to determine the porosity distribution of physically intact tablets. The main advantage of this newly developed method was that porosity cross sections through whole tablets or specific locations could be obtained without mechanically destroying the tested tablet. This was achieved by filling tablet cavities with silicone oil under vacuum. The amount of silicone oil locally within the tablet was then determined by 1H-NMR microscopy, revealing the inverse inner structure. To reduce the measuring time, a paramagnetic gadolinium complex was added to the silicone oil. The cross sectional signals produced by 1H-NMR microscopy through the tablet were transformed into a color image by a specially designed computer graphic program. To improve the signal-noise ratio an algorithm of 3D-filtering was introduced. The maximal spatial resolution achieved with this method was about 95 microns for a cube's edge length corresponding to some 380,000 positions in a 9-mm-diameter compression-coated tablet. Uneven porosity distributions within tablets, cracks, or cavities could be visualized with this newly developed method. Different compaction mechanisms were observed with plastic- or brittle-type tablets. The different states of densification during compaction of powders could be detected. The integrity of compression coatings was determined to be dependent on the pressure load and the location of the core within the coat.

Magnetic Resonance Imaging↗
PubMed2004

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization.

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.

Absorption↗
PubMed2006

Solvent-assisted room-temperature compression molding approach to fabricate porous scaffolds for tissue engineering.

This study investigated the room-temperature compression molding/particle leaching approach to fabricate three-dimensional porous scaffolds for tissue engineering. Scaffolds with anatomical shapes (ear, joint, tube, cylinder) were made from biodegradable poly(D,L-lactide) and poly[(D,L-lactide)-co-glycolide]. The utility of this room-temperature compression approach comes from the effect of solvent assistance, but the tendency for post-molding scaffold shrinkage is a problem unique to this method and is thus examined with emphasis in this paper. Scaffold shrinkage was found to be tolerable under normal fabrication conditions with high salt contents, which is just what the preparation of highly porous scaffolds requires. Furthermore, the resultant porosities after salt leaching were measured as well as the initial scaffold shrinkages after solvent evaporation, and the relation between them was revealed by theoretical analysis and confirmed by comparison with experimental measurements. The pores were interconnected, and porosity can exceed 90%. The effects of porosity on the mechanical properties of porous scaffolds were also investigated. This convenient fabrication approach is a prospective method for the tailoring of porous scaffolds for a variety of possible applications in tissue engineering and tissue reconstruction.

Biocompatible Materials↗
PubMed2006

Organic amendments affecting sorption, leaching and dissipation of fungicides in soils.

Metalaxyl and tricyclazole are two fungicides widely used in Spain in vineyard and rice crops respectively. In this study an investigation has been made of the effect of three organic amendments [two commercial amendments, solid fertiormont (SF) and liquid fertiormont (LF), and a residue from the olive oil production industry, alperujo (OW)] on fungicide fate in soils. Changes in soil porosity on amendment were studied by mercury intrusion porosimetry, sorption-desorption studies were performed by the batch equilibration method, dissipation of metalaxyl and tricyclazole in the soil was studied at - 33 kPa moisture content and 20 degrees C and leaching was studied in hand-packed soil columns. Amendments with SF and LF reduced soil porosity, while OW increased porosity through an increase in pore volume in the highest range studied. Tricyclazole sorbed to soils to a much higher extent than metalaxyl. With some exceptions, sorption of both fungicides increased on amendment, especially in the case of SF-amended soils, which rendered the highest K(oc) values. In soils amended with the liquid amendment LF, sorption either remained unaffected or decreased, and this decrease was much higher in the case of metalaxyl and a soil with 70% clay. In this clay soil, amendment with OW, of very high soluble organic matter content, also decreased metalaxyl sorption. Tricyclazole is more persistent in soil than metalaxyl, and both fungicides were found to be more persistent in amended soils than in unamended soils. Leaching of metalaxyl and tricyclazole in soil columns was inversely related to sorption capacity. The low recoveries of tricyclazole in leachates and in soil columns when compared with metalaxyl, a less persistent fungicide, were attributed to diffusion into micropores and to increase in sorption with residence time in the soil, both processes favoured by the low mobility of tricyclazole.

Adsorption↗
PubMed1998

Measurement of heat conduction through stacked screens.

This paper describes the experimental apparatus for the measurement of heat conduction through stacked screens as well as some experimental results taken with the apparatus. Screens are stacked in a fiberglass-epoxy cylinder, which is 24.4 mm in diameter and 55 mm in length. The cold end of the stacked screens is cooled by a Gifford-McMahon (GM) cryocooler at cryogenic temperature, and the hot end is maintained at room temperature. Heat conduction through the screens is determined from the temperature gradient in a calibrated heat flow sensor mounted between the cold end of the stacked screens and the GM cryocooler. The samples used for these experiments consisted of 400-mesh stainless steel screens, 400-mesh phosphor bronze screens, and two different porosities of 325-mesh stainless steel screens. The wire diameter of the 400-mesh stainless steel and phosphor bronze screens was 25.4 micrometers and the 325-mesh stainless steel screen wire diameters were 22.9 micrometers and 27.9 micrometers. Standard porosity values were used for the experimental data with additional porosity values used on selected experiments. The experimental results showed that the helium gas between each screen enhanced the heat conduction through the stacked screens by several orders of magnitude compared to that in vacuum. The conduction degradation factor is the ratio of actual heat conduction to the heat conduction where the regenerator material is assumed to be a solid rod of the same cross sectional area as the metal fraction of the screen. This factor was about 0.1 for the stainless steel and 0.022 for the phosphor bronze, and almost constant for the temperature range of 40 to 80 K at the cold end.

Alloys↗
PubMedDate not supplied

Effect of a growth hormone treatment on bone orthotropic elasticity in dwarf rats.

A refinement of the current ultrasonic elasticity technique was used to measure the orthotropic elastic properties of rat cortical bone as well as to quantify changes in elastic properties, density, and porosity of the dwarf rat cortex after a treatment with recombinant human growth hormone (rhGH). The ultrasonic elasticity technique was refined via optimized signal management of high-frequency wave propagation through cubic cortical specimens. Twenty dwarf rats (37 days old) were randomly assigned to two groups (10 rats each). The dwarf rat model (5-10% of normal GH) was given subcutaneous injections of either rhGH or saline over a 14-day treatment period. Density was measured using Archimedes technique. Porosity and other microstructural characteristics were also explored via scanning electron microscopy and image analysis. Statistical tests verified significant decreases in cortical orthotropic Young's (-26.7%) and shear (-16.7%) moduli and density (-2.42%) concomitant with an increase in porosity (+125%) after rhGH treatments to the dwarf model (p < 0.05). A change in material symmetry from orthotropy toward planar isotropy within the radial-circumferential plane after GH treatments was also noted. These results demonstrate some alteration in bone properties at this time interval. Structural implications of these changes throughout physiological loading regimens should be explored.

Animals↗
PubMed2005

The construction and investigation of PLGA artificial bone by biomimetic mineralization.

To modify the surface property of poly lactide-co-glycolide (PLGA) by biomimetic mineralization to construct a new kind of artificial bone. PLGA films and 3-diamensional (3-D) porous scaffolds hydrolyzed in alkaline solution were minerilized in SBF for 14 days. The morphology and composition of the mineral grown on PLGA were analyzed with SEM, FTIR and XRD. The porosity of the scaffolds was detected by using the liquid displacement method. The compressive strength of the scaffolds was detected by using a Shimadzu universal mechanic tester. An obvious mineral coating was detected on the surface of films and scaffolds. The main component of the mineral was carbonated hydroxyapatite (HA) similar to the major mineral component of bone tissues. The porosity of the un-mineralized and mineralized porous scaffolds was (84.86 +/- 8.52) % and (79.70 +/- 7.70) % respectively. The compressive strength was 0.784 +/- 0.156 N/mm2 in un-mineralized 3-D porous PLGA and 0.858 +/- 0.145 N/mm2 in mineralized 3-D porous PLGA. There were no significant differences between the mineralized and un-mineralized scaffolds (P > 0.05) in porosity and biomechanics. Biomimetic mineralization is a suitable method to construct artificial bone.

Biocompatible Materials↗
PubMed2006

Cancellous bone from porous Ti6Al4V by multiple coating technique.

A highly porous Ti6Al4V with interconnected porous structure has been developed in our previous study. By using a so-called "Multiple coating" technique, the porous Ti6Al4V can be tailored to resemble cancellous bone in terms of porous structure and mechanical properties. A thin layer of Ti6Al4V slurry was coated on the struts of base porous Ti6Al4V to improve the pore structure. After two additional coating, pore sizes ranged from 100 microm to 700 microm, and the porosity was decreased from approximately 90% to approximately 75%, while the compressive strength was increased from 10.3 +/- 3.3 MPa to 59.4 +/- 20.3 MPa and the Young's modulus increased from 0.8 +/- 0.3 GPa to 1.8 +/- 0.3 GPa. The pore size and porosity are similar to that of cancellous bone, meanwhile the compressive strength is higher than that of cancellous bone, and the Young's modulus is between that of cancellous bone and cortical bone. Porosity, pore size and mechanical properties can be controlled by the parameters in such multiple coating processes. Therefore the porous Ti6Al4V with the characteristics of cancellous bone is expected to be a promising biomaterial for biomedical applications.

Alloys↗
PubMed2006

Hydroxyapatite (HA) bone scaffolds with controlled macrochannel pores.

Hydroxyapatite (HA) macrochanneled porous scaffolds, with a controlled pore structure, were fabricated via a combination of the extrusion and lamination processes. The scaffold was architectured by aligning and laminating the extruded HA and carbon filaments. The macrochannel pores were formed by removing the carbon filaments after thermal treatments (binder removal and sintering). The porosity of the scaffolds was varied between 48 and 73% with a controlled pore size of approximately 450 microm, by adjusting the fractions of HA and carbon filaments. As the porosity was increased from 48 to 73%, the compressive strength decreased from 11.5 to 3.2 MPa. However, the osteoblast-like cell responses on the scaffold, such as the proliferation rate and alkaline phosphatase (ALP) activity, were significantly enhanced as the porosity was increased.

Alkaline Phosphatase↗
PubMed1990

The nonlinear characteristics of soft gels and hydrated connective tissues in ultrafiltration.

A one-dimensional ultrafiltration problem of fluid flow through a soft permeable tissue or gel under high pressure and compressive strain is solved. A finite deformation biphasic theory is used to model the behavior of the soft porous permeable solid matrix. This theory includes a Helmholtz free energy function which depends on the three principal invariants (I, II, III) of the right Cauchy-Green tensor and which satisfies the Baker-Ericksen inequalities on the principal stresses and strains. The dependence of the porosity phi f and the solidity phi s on deformation is deduced and a generalization of the exponential strain-dependent functional form for the permeability, k = k0 exp (M epsilon), of Lai and Mow (Biorheology 103, 111-123, 1980) is proposed. In this one-dimensional problem, we show that the dependence of the permeability on phi f, phi s, and III is equivalent to its dependence on hydration as proposed by Fatt and Goldstick (J. Colloid Sci. 20, 962-988, 1965). The exact solution of the ultrafiltration problem is derived and asymptotic and numerical methods are used to evaluate it. For high pressures and finite strains, the solution provides some surprising effects. The theory predicts that a material starting with a homogeneous porosity will have a strongly non-homogeneous porosity throughout the column during ultrafiltration. The resulting change in pore size through the filtration column may be very important in understanding its filtration characteristics. It is also found that there is a long delay time, up to 10 to 15 min, before the filtration velocity reaches an equilibrium. In filtration experiments where the rate of mass transport across the tissue or column of gel is important, sufficient time must be allowed for the steady state to be reached.

Animals↗
PubMedDate not supplied

Geometric properties and the predicted mechanical behavior of adult human clavicles.

An image processing system was used to examine histomorphometric properties of 15 adult male and female human clavicles. Variations in porosity, cross-sectional area, anatomic and principal moments of inertia were assessed at 2.5-5.0% increments along the length of the clavicles. The clavicle's biomechanical behavior (axial, flexural, and torsional rigidities and the critical force for buckling) was modeled from these data using beam theory. Over threefold variations in porosity and moments of inertia were found along the length of the s-shaped clavicle--the greatest porosity and moments of inertia were located in the variably shaped sternal and acromial thirds of the bone in contrast to the denser and smaller, more circulatory shaped central third of the bone. Clavicle orientation, as indicated by the direction of greatest resistance to bending (maximum principal moment of inertia), was found to rotate from a primarily cranio-caudal orientation at the sternum to a primarily anterior-posterior orientation at the acromion. Based on cross-sectional geometry, section moduli, and estimates of flexural and torsional rigidity, the clavicle was found to be weakest in the central third of its length. These data concur with the fracture location most commonly reported clinically. Analysis of Euler buckling predicted a minimum critical force for buckling during axial loading of approximately two to three body weights for an average adult. Thus, buckling, or a combination of axial loading and bending or torsional loading, must be considered as possible failure mechanisms for this commonly injured bone.

Acromion↗
PubMed1995

Hydroxyapatite-based porous aggregates: physico-chemical nature, structure, texture and architecture.

At the request of medical teams from the maxillofacial sector, a highly porous ceramic support based on hydroxyapatite of around 70-80% porosity was produced with a pore size distribution similar to bone texture (< 10 microns, approximately 3 vol%; 10-150 microns, approximately 110 vol%; > 150 microns, approximately 86 vol%). The ceramic substrates were conceived not only as a fillers for bone cavities, but also for use as drug dispensers and as supports to host cells to produce particular therapeutic agents. A method is suggested to obtain a substrate of high porosity, exploiting the impregnation of spongy substrate with hydroxyapatite ceramic particles. X-ray and scanning electron microscopy analyses were carried out to evaluate the nature of the new ceramic support in comparison with the most common commercial product; pore size distribution and porosity were controlled to known hydroxyapatite ceramic architecture for the different possible uses.

Biocompatible Materials↗
PubMed1991

On the significance of remodeling space and activation rate changes in bone remodeling.

This paper quantifies the relative contributions of the remodeling space and the accumulation of Haversian canals to bone porosity at various ages. It also examines the importance of variations in the rate of bone remodeling that occur during growth and aging, and as a result of trauma and disease. The dependence of the remodeling space (cavities due to resorbing, reversing, and refilling BMUs) and the Haversian canal components of porosity on the Basic Multicellular Unit (BMU) activation frequency are mathematically formulated. A graph is developed using data for the cortex of the human rib which shows the extent to which porosity is primarily due to the remodeling space in children, and to accumulated Haversian canals in adults. It is shown that the diminution of activation frequency between birth and age 35 contributes to the concurrent increase in bone volume fraction, and the increase in activation frequency after age 35 contributes to the subsequent decline of bone volume fraction. An equation is derived for determining the time rate of change of activation frequency using two fluorochrome labels.

Aging↗
PubMedDate not supplied

Recovery from disuse osteopenia coincident to restoration of muscle strength in mdx mice.

The objective of this study was to compare the tibial structure and the strength of the tibia during muscle weakness and after recovery in mdx mice (which demonstrate X-linked muscular dystrophy and subsequent muscle regeneration) and age-matched control mice. The extent of disuse atrophy produced by muscle weakness and recovery following restoration of normal muscle strength could then be determined. The tibiae adjacent to weakened tibialis anterior muscles of 4-week-old mdx mice had significantly reduced radiographic density (p < 0.05) and cortical thickness (p < 0.001), and increased porosity (p < 0.001) compared to age-matched controls, suggesting development of disuse osteopenia. Significantly less force was required to break mdx tibiae than age-matched control tibiae (p < 0.05). In addition, Sharpey's fiber density was reduced (p < 0.001), suggesting a weakened attachment of the tibialis anterior muscle to bone. At 12 weeks, during the period of muscle regeneration, mdx tibial cortical thickness (p < 0.001) and porosity (p < 0.01) remained significantly lower, but percent calcium and Sharpey's fiber and radiographic densities were significantly greater (p < 0.001) than in age-matched controls, suggesting that bone mineralization and muscle attachment strength had increased to above normal levels in parallel with recovery of strength by the attached muscle. By 18 weeks, mdx tibial cross-sectional area, cortical thickness, and porosity remained significantly less (p < 0.001) than normal. Although Sharpey's fiber density was greater than in age-matched controls (p < 0.001) by 18 weeks, mdx tibial percent calcium (p < 0.005) and Sharpey's fiber density (p < 0.001) were significantly reduced from levels in 12-week-old mdx animals. There was significantly less deformation of the tibia prior to fracture in mdx than control tibiae at 18 weeks of age, suggesting tibial brittleness. Thus, at the site of attachment of mdx muscle to osteopenic bone, the remodelling which accompanies recovery of muscle strength is atypical, and produces an attachment of greater strength than function appears to require. These observations suggest that data are needed regarding bone mass and muscle-bone attachments in humans with disuse osteopenia, DMD, and other neuromuscular diseases.

Animals↗
PubMed1996

Qualitative alterations of cortical bone in female rats after long-term administration of growth hormone and glucocorticoid.

A serious side effect of glucocorticoid treatment is the development of osteoporosis. We have earlier shown that long-term glucocorticoid administration results in a decrease in longitudinal bone growth, cortical bone mass, and biomechanical strength, while growth hormone administration increases these parameters. The result of biomechanical testing also indicates that glucocorticoid administration reduces the quality of bone. The glucocorticoid-induced osteopenia could not be inhibited by concomitant administration of large doses of growth hormone. The aim of the present study was to evaluate why glucocorticoid administration decreases the quality of cortical bone and why growth hormone administration had no beneficial effect on glucocorticoid-induced osteopenia. Five groups of female rats (3 1/2 months old) were treated for 80 days as follows: (1) glucocorticoid (prednisolone: Delcortol 5 mg/kg/day); (2) glucocorticoid and growth hormone; (3) saline; (4) growth hormone (recombinant human growth hormone 5 mg/kg/day); (5) Food restriction (consisting of restricted access to food to reduce their weight gain to match with that of the glucocorticoid injected rats). The animals were injected with tetracycline (15 mg/kg), 18 and 3 days before sacrifice, respectively. Furthermore, a baseline group (3 1/2-month-old female rats) was examined in order to enable us to differentiate between age-related changes and changes due to the hormone administration. Cortical mid-diaphysial cross sections of the femora were prepared and used for histological examination including determination of bone porosity, bone formation rate, and determination of the area of endosteal cavities as an indication of bone resorption. Furthermore, a cortical bone cylinder was cut from the mid-diaphysis and used for examinations of wet weight, dry weight, ash weight, volume, collagen content, and apparent density. Glucocorticoid administration resulted in an almost complete arrest of bone formation as shown by a decreased bone formation rate and a decreased periosteal mineralizing surface. Glucocorticoid administration also increased the porosity of bone indicating increased osteoclast activity. The increased porosity was due to a glucocorticoid-induced increase in the number of endosteal cavities in the mid-diaphysial cross section of the femora. The decreased bone formation and the increased bone resorption can explain the decrease in bone mass (volume and ash weight) found after glucocorticoid administration. Growth hormone administration, on the other hand, resulted in a marked increase in bone formation as shown by a marked increase in bone formation rate and periosteal mineralizing surface. In agreement with this, we found an increase in cortical bone mass (volume and ash weight). When the two hormones were given concomitantly, growth hormone administration did not increase bone formation. Our findings indicate the reason why growth hormone has no beneficial effect on cortical osteopenia induced by a high dose of glucocorticoid with protracted effect.

Administration, Oral↗
PubMed2005

High strength, low stiffness, porous NiTi with superelastic properties.

Near-stoichiometric NiTi with up to 18% closed porosity was produced by expansion at 1200 degrees C of argon-filled pores trapped by powder metallurgy within a NiTi billet. When optimally heat-treated, NiTi with 6-16% porosity exhibits superelasticity, with recoverable compressive strains up to 6% at a maximum compressive stress up to 1700 MPa. The apparent Young's modulus of NiTi with 16% porosity, measured during uniaxial compression, is in the range of 15-25 GPa (similar to human bone), but is much lower than measured ultrasonically (approximately 40 GPa), or predicted from continuum elastic mechanics. This effect is attributed to the reversible stress-induced transformation contributing to the linear elastic deformation of porous NiTi. The unique combination of low stiffness, high strength, high recoverable strains and large energy absorption of porous superelastic NiTi, together with the known biocompatibility of NiTi, makes this material attractive for bone-implant applications.

Bone Substitutes↗
PubMed2005

Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications.

In the engineering of soft tissues, scaffolds with high elastance and strength coupled with controllable biodegradable properties are necessary. To fulfill such design criteria we have previously synthesized two kinds of biodegradable polyurethaneureas, namely poly(ester urethane)urea (PEUU) and poly(ether ester urethane)urea (PEEUU) from polycaprolactone, polycaprolactone-b-polyethylene glycol-b-polycaprolactone, 1,4-diisocyanatobutane and putrescine. PEUU and PEEUU were further fabricated into scaffolds by thermally induced phase separation using dimethyl sulfoxide (DMSO) as a solvent. The effect of polymer solution concentration, quenching temperature and polymer type on pore morphology and porosity was investigated. Scaffolds were obtained with open and interconnected pores having sizes ranging from several mum to more than 150 microm and porosities of 80-97%. By changing the polymer solution concentration or quenching temperature, scaffolds with random or oriented tubular pores could be obtained. The PEUU scaffolds were flexible with breaking strains of 214% and higher, and tensile strengths of approximately 1.0 MPa, whereas the PEEUU scaffolds generally had lower strengths and breaking strains. Scaffold degradation in aqueous buffer was related to the porosity and polymer hydrophilicity. Smooth muscle cells were filtration seeded in the scaffolds and it was shown that both scaffolds supported cell adhesion and growth, with smooth muscle cells growing more extensively in the PEEUU scaffold. These biodegradable and flexible scaffolds demonstrate potential for future application as cell scaffolds in cardiovascular tissue engineering or other soft tissue applications.

Absorbable Implants↗