Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Methane”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

Toward delineating the structure and function of the particulate methane monooxygenase from methanotrophic bacteria.

The particulate methane monooxygenase (pMMO) is a complex membrane protein complex that has been difficult to isolate and purify for biochemical and biophysical characterization because of its instability in detergents used to solubilize the enzyme. In this perspective, we summarize the progress recently made toward obtaining a purified pMMO-detergent complex and characterizing the enzyme in pMMO-enriched membranes. The purified pMMO is a multi-copper protein, with ca. 15 copper ions sequestered into five trinuclear copper clusters: two for dioxygen chemistry and alkane hydroxylation (catalytic or C-clusters) and three to provide a buffer of reducing equivalents to re-reduce the C-clusters following turnover (electron transfer or E-clusters). The enzyme is functional when all the copper ions are reduced. When the protein is purified under ambient aerobic conditions in the absence of a hydrocarbon substrate, only the C-clusters are oxidized; there is an apparent kinetic barrier for electron transfer from the E-cluster copper ions to the C-clusters under these conditions. Evidence is provided in support of both C-clusters participating in the dioxygen chemistry, but only one C-cluster supporting alkane hydroxylation. Acetylene modification of the latter C-cluster in the hydrophobic pocket of the active site lowers or removes the kinetic barrier for electron transfer from the E-clusters to the C-clusters so that all the copper ions could be fully oxidized by dioxygen. A model for the hydroxylation chemistry when a hydrocarbon substrate is bound to the active site of the hydroxylation C-cluster is presented. Unlike soluble methane monooxygenase (sMMO), pMMO exhibits limited substrate specificity, but the hydroxylation chemistry is highly regioselective and stereoselective. In addition, the hydroxylation occurs with total retention of configuration of the carbon center that is oxidized. These results are consistent with a concerted mechanism involving direct side-on insertion of an active singlet "oxene" from the activated copper cluster across the "C-H" bond in the active site. Finally, in our hands, both the purified pMMO-detergent complex and pMMO-enriched membranes exhibit high NADH-sensitive as well as duroquinol-sensitive specific activity. A possible role for the two reductants in the turnover of the enzyme is proposed.

Alphaproteobacteria↗

Biochemical characterization of MmoS, a sensor protein involved in copper-dependent regulation of soluble methane monooxygenase.

Methane monooxygenase (MMO) enzymes catalyze the oxidation of methane to methanol in methanotrophic bacteria. Several strains of methanotrophs, including Methylococcus capsulatus (Bath), express a membrane-bound or particulate MMO (pMMO) at high copper-to-biomass ratios and a soluble MMO (sMMO) form when copper is limited. The mechanism of this "copper switch" is not understood. The mmoS gene, located downstream of the sMMO operon, encodes a sensor protein that is part of a two-component signaling system and has been proposed to play a role in the copper switch. MmoS from M. capsulatus (Bath) has been cloned, expressed, and purified. The purified protein is a tetramer of molecular mass 480 kDa. Optical spectra indicate that MmoS contains a flavin cofactor, identified as flavin adenine dinucleotide (FAD) by fluorescence spectroscopy and chromatographic analysis. The redox potential of the MmoS-bound FAD, which binds within the N-terminal PAS-PAC domains, is -290 +/- 2 mV at pH 8.0 and 25 degrees C. Despite extensive efforts, MmoS could not be loaded with Cu(I) or Cu(II), indicating that MmoS does not sense copper directly. These data suggest that MmoS functions as a redox sensor and provide new insight into the copper-mediated regulation of sMMO expression.

Bacterial Proteins↗

Reactions of nitric oxide with the reduced non-heme diiron center of the soluble methane monooxygenase hydroxylase.

The soluble methane monooxygenase system from Methylococcus capsulatus (Bath) catalyzes the oxidation of methane to methanol and water utilizing dioxygen at a non-heme, carboxylate-bridged diiron center housed in the hydroxylase (H) component. To probe the nature of the reductive activation of dioxygen in this system, reactions of an analogous molecule, nitric oxide, with the diiron(II) form of the enzyme (Hred) were investigated by both continuous and discontinuous kinetics methodologies using optical, EPR, and Mössbauer spectroscopy. Reaction of NO with Hred affords a dinitrosyl species, designated Hdinitrosyl, with optical spectra (lambdamax = 450 and 620 nm) and Mössbauer parameters (delta = 0.72 mm/s, DeltaEQ = 1.55 mm/s) similar to those of synthetic dinitrosyl analogues and of the dinitrosyl adduct of the reduced ribonucleotide reductase R2 (RNR-R2) protein. The Hdinitrosyl species models features of the Hperoxo intermediate formed in the analogous dioxygen reaction. In the presence of protein B, Hdinitrosyl builds up with approximately the same rate constant as Hperoxo ( approximately 26 s-1) at 4 degrees C. In the absence of protein B, the kinetics of Hdinitrosyl formation were best fit with a biphasic A --> B --> C model, indicating the presence of an intermediate species between Hred and Hdinitrosyl. This result contrasts with the reaction of Hred with dioxygen, in which the Hperoxo intermediate forms in measurable quantities only in the presence of protein B. These findings suggest that protein B may alter the positioning but not the availability of coordination sites on iron for exogenous ligand binding and reactivity.

Bacterial Proteins↗

An EPR study of the dinuclear iron site in the soluble methane monooxygenase from Methylococcus capsulatus (Bath) reduced by one electron at 77 K: the effects of component interactions and the binding of small molecules to the diiron(III) center.

Reduction of the soluble methane monooxygenase hydroxylase (MMOH) from Methylococcus capsulatus (Bath) in frozen 4:1 buffer/glycerol solutions at 77 K by mobile electrons generated by gamma-irradiation produces an EPR-detectable, mixed-valent Fe(II)Fe(III) center. At this temperature the conformation of the enzyme remains essentially unaltered during reduction, so the mixed-valent EPR spectra serve to probe the active site structure of the EPR-silent, diiron(III) state. The EPR spectra of the cryoreduced samples reveal that the diiron(III) cluster of the resting hydroxylase has at least two chemically distinct forms, the structures of which differ from that of the equilibrium Fe(II)Fe(III) site. Their relative populations depend on pH, the presence of component B, and formation of the MMOH/MMOB complex by reoxidation of the reduced, diiron(II) hydroxylase. The formation of complexes between MMOB, MMOR, and the oxidized hydroxylase does not measurably affect the structure of the diiron(III) site. Cryogenic reduction in combination with EPR spectroscopy has also provided information about interaction of MMOH in the diiron(III) state with small molecules. The diiron(III) center binds methanol and phenols, whereas DMSO and methane have no measurable effect on the EPR properties of cryoreduced hydroxylase. Addition of component B favors the binding of some exogenous ligands, such as DMSO and glycerol, to the active site diiron(III) state and markedly perturbs the structure of the diiron(III) cluster complexed with methanol or phenol. The results reveal different reactivity of the Fe(III)Fe(III) and Fe(II)Fe(III) redox states of MMOH toward exogenous ligands. Moreover, unlike oxidized hydroxylase, the binding of exogenous ligands to the protein in the mixed-valent state is allosterically inhibited by MMOB. The differential reactivity of the hydroxylase in its diiron(III) and mixed-valent states toward small molecules, as well as the structural basis for the regulatory effects of component B, is interpreted in terms of a model involving carboxylate shifts of a flexible glutamate ligand at the Fe(II)Fe(III) center.

Binding Sites↗

Probing the mechanism of C-H activation: oxidation of methylcubane by soluble methane monooxygenase from Methylosinus trichosporium OB3b.

The soluble form of methane monooxygenase (MMO) isolated from methanotrophic bacteria catalyzes the O2-dependent conversion of methane to methanol, as well as the adventitious oxidation of many other hydrocarbons. In past studies, it was reported that the oxidation reaction of methylcubane, a radical clock substrate, catalyzed by MMO from Methylococcus capsulatus (Bath) gave only cubylmethanol as the product rather than methylcubanol(s) or rearranged products characteristic of a radical formed on the methyl group [Choi, S.-Y., Eaton, P. E., Hollenberg, P. F., Liu, K. E., Lippard, S. J., Newcomb, M., Putt, D. A., Upadhyaya, S. P., and Xiong, Y. (1996) J. Am. Chem. Soc. 118, 6547-6555]. Such a substrate radical intermediate would be expected if the mechanism of MMO involves hydrogen atom abstraction as indicated by many previous mechanistic studies. Here it is shown that the reaction of methylcubane with the reconstituted MMO system from Methylosinus trichosporium OB3b yields both cubylmethanol and methylcubanols, with methyl hydroxylation favored over cubyl hydroxylation. This unexpected regioselectivity indicates steric effects on the reaction in agreement with past product distribution studies. In addition, the apparent majority product of the reaction is tentatively assigned as one of the possible rearranged products for this radical probe, on the basis of gas chromatography and mass spectrometry data. This result suggests the formation of a radical intermediate in the reaction, thus supporting a radical-based mechanism for this form of MMO.

Bacteria↗

Density functional studies of oxidized and reduced methane monooxygenase. Optimized geometries and exchange coupling of active site clusters.

The conflicting protein crystallography data for the oxidized form (MMOH(ox)) of methane monooxygenase present a dilemma regarding the identity of the solvent-derived bridging ligands within the active site: do they comprise a diiron unit bridged by 1H2O and 1OH(-) as postulated for Methylococcus capsulatus or 2OH(-) ligands as suggested for Methylosinus trichosporium? Using models derived explicitly from the M. capsulatus and M. trichosporium protein data, spin-unrestricted density functional methods have been used to study two structurally characterized forms of the hydroxylase component of methane monooxygenase. The active site geometries of the oxidized (MMOH(ox)) and two-electron-reduced (MMOH(red)) states have been geometry optimized using several quantum cluster models which take into account the antiferromagnetic (AF) and ferromagnetic (F) coupling of electron spins. Trends in cluster geometries, energetics, and Heisenberg J values have been evaluated. For the majority of models, calculated geometries are in good agreement with the X-ray analyses and appear relatively insensitive to the F or AF alignment of electron spins on adjacent Fe sites. Discrepancies between calculation and experiment appear in the orientation of the coordinated His and Glu amino acid side chains for both MMOH(ox) and MMOH(red) and also in unexpected intramolecular proton transfer in the MMOH(ox) cluster models. There is additional dispersion between (and among) calculated and experimental Fe(3+)-OH(-) distances with relevance to the correct protonation state of the solvent-derived ligands. In an accompanying paper (Lovell, T.; Li, J.; Noodleman, L. Inorg. Chem. 2001, 40, 5267), a comparison of the related energetics of the active site models examined herein is further evaluated in the full protein and solvent environment.

Binding Sites↗

Supramolecular structures of cadmium(II) coordination polymers: a new class of ligands formed by linking tripodal tris(pyrazolyl)methane units.

The new ligands C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (pz = pyrazolyl ring), 1 (ortho), 2 (meta), and 3 (para), that can potentially bond two or more metal centers were obtained in a single step from the reaction of the appropriate dibromoxylene, 2 equiv of tris-2,2,2-(1-pyrazolyl)ethanol, and excess NaH. Although the arrangement of the tris(pyrazolyl)methane units in the solid-state structures of 1 and 3 are similar, the orientation of these groups with respect to the phenyl ring are different, with 1 showing a twisted structure and 3 a stepped structure. The reaction of [Cd(2)(THF)(5)][BF(4)](4) with the appropriate ligand yields each of the three coordination polymers of the formula [C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)Cd](BF(4))(2)](n), 4 (ortho), 5 (meta), and 6 (para). In the solid-state structures of all three each tris(pyrazolyl)methane unit is tridentate, with each ligand bonded to two different cadmium(II) atoms, forming a coordination polymer containing 6-coordinate, pseudooctahedral cadmium(II) centers. Polymers 4 and 5 form wavelike chains whereas 6 is arranged in a stepped structure similar to the free ligand. The different connecting patterns of each ligand lead to very different supramolecular structures, structures organized by the BF(4)(-) groups through weak C-H...F hydrogen bonds. Crystallographic information: 1 is monoclinic, P2(1)/n, a = 16.3157(13) A, b = 8.5880(6) A, c = 21.9227(17) A, alpha = gamma = 90 degrees, beta = 100.134(2) degrees, Z = 4; 3 is monoclinic, P2(1)/n, a = 9.1965(9) A, b = 12.9185(12) A, c = 12.7306(12) A, alpha = gamma = 90 degrees, beta = 104.099(2) degrees, Z = 2; 4 is triclinic, P1, a = 10.7877(19) A, b = 12.582(2) A, c = 15.409(3) A, alpha =103.860(4) degrees, beta = 94.123(4) degrees, gamma = 92.573(4) degrees, Z = 2; 6 is monoclinic, C2/c, a = 23.023(3) A, b = 12.2588(14) A, c = 18.119(2) A, alpha = gamma = 90 degrees, beta = 121.281(2) degrees, Z = 4.

Journal Article↗

DFT calculations of isomer shifts and quadrupole splitting parameters in synthetic iron-oxo complexes: applications to methane monooxygenase and ribonucleotide reductase.

To predict isomer shifts and quadrupole splitting parameters of Fe atoms in the protein active sites of methane monooxygenase and ribonucleotide reductase, a correlation between experimental isomer shifts ranging 0.1-1.5 mm s(-)(1) for Fe atoms in a training set with the corresponding density functional theory (DFT) calculated electron densities at the Fe nuclei in those complexes is established. The geometries of the species in the training set, consisting of synthetic polar monomeric and dimeric iron complexes, are taken from the Cambridge structural database. A comparison of calculated Mössbauer parameters for Fe atoms from complexes in the training set with their corresponding experimental values shows very good agreement (standard deviation of 0.11 mm/s, correlation coefficient of -0.94). However, for the Fe atoms in the active sites of the structurally characterized proteins of methane monooxygenase and ribonucleotide reductase, the calculated Mössbauer parameters deviate more from their experimentally measured values. The high correlation that exists between calculated and observed quadrupole splitting and isomer shift parameters for the synthetic complexes leads us to conclude that the main source of the error arising for the protein active sites is due to the differing degrees of atomic-level resolution for the protein structural data, compared to the synthetic complexes in the training set. Much lower X-ray resolutions associated with the former introduce uncertainty in the accuracy of several bond lengths. This is ultimately reflected in the calculated isomer shifts and quadrupole splitting parameters of the Fe sites in the proteins. For the proteins, the closest correspondence between predicted and observed Mössbauer isomer shifts follows the order MMOH(red), RNR(red), MMOH(ox), and RNR(ox), with average deviations from experiment of 0.17, 0.17, 0.17-0.20, and 0.32 mm/s, but this requires DFT geometry optimization of the iron-oxo dimer complexes.

Chemical Phenomena↗

Reactions of methane with titanium atoms: CH3TiH, CH2=TiH2, agostic bonding, and (CH3)2TiH2.

Laser-ablated titanium atoms react with methane to form the insertion product CH3TiH, which undergoes a reversible photochemical alpha-H transfer to give the methylidene complex CH2=TiH2. On annealing a second methane activation occurs to produce (CH3)2TiH2. These molecules are identified from matrix infrared spectra by isotopic substitution (CH4, 13CH4, CD4, CH2D2) and comparison to DFT frequency calculations. The computed planar structure for singlet ground-state CH2=TiH2 shows CH2 distortion and evidence for agostic bonding (H-C-Ti, 91.4 degrees), which is supported by the spectra for CHD=TiHD.

Journal Article↗

Structural and electronic differences of copper(I) complexes with tris(pyrazolyl)methane and hydrotris(pyrazolyl)borate ligands.

Copper(I) complexes with tripodal nitrogen-containing neutral ligands such as tris(3,5-diisopropyl-1-pyrazolyl)methane (L1') and tris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3'), and with corresponding anionic ligands such as hydrotris(3,5-diisopropyl-1-pyrazolyl)borate (L1-) and hydrotris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)borate (L3-) were synthesized and structurally characterized. Copper(I) complexes [Cu(L1')Cl] (1), [Cu(L1')(OClO3)] (2), [Cu(L1')(NCMe)](PF6) (3a), [Cu(L1')(NCMe)](ClO4) (3b), [Cu(L1')(CO)](PF6) (4a), and [Cu(L1')(CO)](ClO4) (4b) were prepared using the ligand L1'. Copper(I) complexes [Cu(L3')Cl] (5) and [Cu(L3')(NCMe)](PF6) (6) with the ligand L3' were also synthesized. Copper(I) complexes [Cu(L1)(NCMe)] (7) and [Cu(L1)(CO)] (8) were prepared using the anionic ligand L1-. Finally, copper(I) complexes with anionic ligand L3- and acetonitrile (9) and carbon monoxide (10) were synthesized. The complexes obtained were fully characterized by IR, far-IR, 1H NMR, and 13C NMR spectroscopy. The structures of both ligands, L1' and L3', and of complexes 1, 2, 3a, 3b, 4a, 4b, 5, 6, 7, and 10 were determined by X-ray crystallography. The effects of the differences in (a) the fourth ligand and the counteranion, (b) the steric hindrance at the third position of the pyrazolyl rings, and most importantly, (c) the charge of the N3 type ligands, on the structures, spectroscopic properties, and reactivities of the copper(I) complexes are discussed. The observed differences in the reactivities toward O2 of the copper(I) acetonitrile complexes are traced back to differences in the oxidation potentials determined by cyclic voltammetry. A special focus is set on the carbonyl complexes, where the 13C NMR and vibrational data are presented. Density functional theory (DFT) calculations are used to shed light on the differences in CO bonding in the compounds with neutral and anionic N3 ligands. In correlation with the vibrational and electrochemical data of these complexes, it is demonstrated that the C-O stretching vibration is a sensitive probe for the "electron richness" of copper(I) in these compounds.

Borates↗

Synthesis of zinc, copper, nickel, cobalt, and iron complexes using tris(pyrazolyl)methane sulfonate ligands: a structural model for N,N,O binding in metalloenzymes.

Ligands of intermediate steric bulk were designed to mimic metalloenzymes with histidine and carboxlyate binding sites. The reaction between tris(3-isopropylpyrazolyl)methane and butyllithium followed by SO3NMe3 in THF yielded the new ligand lithium tris(3-isopropylpyrazolyl)methane sulfonate (LiTpmsiPr). Various metal salts reacted with LiTpmsiPr to give the octahedral complexes M(TpmsiPr)2 (M = Zn, Cu, Ni, Co, Fe) in which each ligand has N,N,O binding to the metal. In the reaction between LiTpmsiPr and ZnCl2, in addition to the major product Zn(TpmsiPr)2, [LiTpmsiPrZnCl2].2THF was also formed as a minor product with a tetrahedral zinc atom coordinated to either N,N,Cl,Cl in the solid phase or N,N,N,Cl in acetonitrile solution. Although TpmsiPr is coordinatively flexible and can act as a bipodal or tripodal ligand, it appears to favor the formation of octahedral L2M complexes.

Binding Sites↗

Characterization of the particulate methane monooxygenase metal centers in multiple redox states by X-ray absorption spectroscopy.

The integral membrane enzyme particulate methane monooxygenase (pMMO) converts methane, the most inert hydrocarbon, to methanol under ambient conditions. The 2.8-A resolution pMMO crystal structure revealed three metal sites: a mononuclear copper center, a dinuclear copper center, and a nonphysiological mononuclear zinc center. Although not found in the crystal structure, solution samples of pMMO also contain iron. We have used X-ray absorption spectroscopy to analyze the oxidation states and coordination environments of the pMMO metal centers in as-isolated (pMMO(iso)), chemically reduced (pMMO(red)), and chemically oxidized (pMMO(ox)) samples. X-ray absorption near-edge spectra (XANES) indicate that pMMO(iso) contains both Cu(I) and Cu(II) and that the pMMO Cu centers can undergo redox chemistry. Extended X-ray absorption fine structure (EXAFS) analysis reveals a Cu-Cu interaction in all redox forms of the enzyme. The Cu-Cu distance increases from 2.51 to 2.65 A upon reduction, concomitant with an increase in the average Cu-O/N bond lengths. Appropriate Cu2 model complexes were used to refine and validate the EXAFS fitting protocols for pMMO(iso). Analysis of Fe EXAFS data combined with electron paramagnetic resonance (EPR) spectra indicates that Fe, present as Fe(III), is consistent with heme impurities. These findings are complementary to the crystallographic data and provide new insight into the oxidation states and possible electronic structures of the pMMO Cu ions.

Copper↗

Metallacycles of iron, zinc, and cadmium assembled by polytopic bis(pyrazolyl)methane ligands and fluoride abstraction from BF4-.

Reactions of the arene-linked bis(pyrazolyl)methane ligands m-bis[bis(1-pyrazolyl)methyl]benzene (m-[CH(pz)2]2C6H4, Lm) and 1,3,5-tris[bis(1-pyrazolyl)methyl]benzene (1,3,5-[CH(pz)2]3C6H3, L3) with BF4- salts of divalent iron, zinc, and cadmium result in fluoride abstraction from BF4- and formation of fluoride-bridged metallacyclic complexes. Treatment of Fe(BF4)2.6H2O and Zn(BF4)2.5H2O with Lm leads to the complexes [Fe2(mu-F)(mu-Lm)2](BF4)3 (1) and [Zn2(mu-F)(mu-Lm)2](BF4)3 (2), in which a single fluoride ligand and two Lm molecules bridge the two metal centers. The reaction of [Cd2(thf)5](BF4)4 with Lm results in the complex [Cd2(mu-F)2(mu-Lm)2](BF4)2 (3), which contains dimeric cations in which two fluoride and two Lm ligands bridge the cadmium centers. Equimolar amounts of the tritopic ligand L3 and Zn(BF4)2.5H2O react to give the related monofluoride-bridged complex [Zn2(mu-F)(mu-L3)2](BF4)3 (4), in which one bis(pyrazolyl)methane unit on each ligand remains unbound. NMR spectroscopic studies show that in acetonitrile the zinc metallacycles observed in the solid-state remain intact in solution.

Journal Article↗

Syntheses of Cationic, Six-Coordinate Cadmium(II) Complexes Containing Tris(pyrazolyl)methane Ligands. Influence of Charge on Cadmium-113 NMR Chemical Shifts.

Treating a thf (thf = tetrahydrofuran) suspension of Cd(acac)(2) (acac = acetylacetonate) with 2 equiv of HBF(4).Et(2)O results in the immediate formation of [Cd(2)(thf)(5)](BF(4))(4) (1). Crystallization of this complex from thf/CH(2)Cl(2) yields [Cd(thf)(4)](BF(4))(2) (2), a complex characterized in the solid state by X-ray crystallography. Crystal data: monoclinic, P2(1)/n, a = 7.784(2) Å, b = 10.408(2) Å, c = 14.632(7) Å, beta = 94.64(3) degrees, V = 1181.5(6) Å(3), Z = 2, R = 0.0484. The geometry about the cadmium is octahedral with a square planar arrangement of the thf ligands and a fluorine from each (BF(4))(-) occupying the remaining two octahedral sites. Reactions of [Cd(2)(thf)(5)](BF(4))(4) with either HC(3,5-Me(2)pz)(3) or HC(3-Phpz)(3) yield the dicationic, homoleptic compounds {[HC(3,5-Me(2)pz)(3)](2)Cd}(BF(4))(2) (3) and {[HC(3-Phpz)(3)](2)Cd}(BF(4))(2) (4) (pz = 1-pyrazolyl). The solid state structure of 3 has been determined by X-ray crystallography. Crystal data: rhombohedral, R&thremacr;, a = 12.236(8) Å, c = 22.69(3) Å, V = 2924(4) Å(3), Z = 3, R = 0.0548. The cadmium is bonded to the six nitrogen donor atoms in a trigonally distorted octahedral arrangement. Four monocationic, mixed ligand tris(pyrazolyl)methane-tris(pyrazolyl)borate complexes {[HC(3,5-Me(2)pz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (5), {[HC(3,5-Me(2)pz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (6), {[HC(3-Phpz)(3)][HB(3,5-Me(2)pz)(3)]Cd}(BF(4)) (7), and {[HC(3-Phpz)(3)][HB(3-Phpz)(3)]Cd}(BF(4)) (8) are prepared by appropriate conproportionation reactions of 3or 4 with equimolar amounts of the appropriate homoleptic neutral tris(pyrazolyl)borate complexes [HB(3,5-Me(2)pz)(3)](2)Cd or [HB(3-Phpz)(3)](2)Cd. Solution (113)Cd NMR studies on complexes 3-8 demonstrate that the chemical shifts of the new cationic, tris(pyrazolyl)methane complexes are very similar to the neutral tris(pyrazolyl)borate complexes that contain similar substitution of the pyrazolyl rings.

Journal Article↗

Temperature-dependent photochemistry of 1,3-diphenylpropenes. The di-pi-methane reaction revisited.

The temperature-dependent photochemical behavior of 1,3-diphenylpropene and several of its 3-substituted derivatives has been investigated over a wide temperature range. The singlet state is found to decay via two unactivated processes, fluorescence and intersystem crossing, and two activated processes, trans,cis isomerization and phenyl-vinyl bridging. The latter activated process yields a diradical intermediate which partitions between ground-state reactant and formation of the di-pi-methane rearrangement product. Kinetic modeling of temperature-dependent singlet decay times and quantum yields of fluorescence, isomerization, di-pi-methane rearrangement, and nonradiative decay provides rate constants and activation parameters for each of the primary and secondary processes. Substituents at the 3-position are found to have little effect on the electronic spectra or unactivated fluorescence and intersystem crossing pathways. However, they do effect the activated primary and secondary processes. Thus, the product ratios are highly temperature dependent.

Journal Article↗

Adsorption isotherm and other properties of methane in zeolite A from an intermolecular potential derived from ab initio calculations.

A classical Lennard-Jones potential is derived from a fit to the ab initio energies obtained from an all-electron mixed-basis calculation for methane in zeolite LTA. The potential predicts the heat of adsorption, adsorption isotherm, and self-diffusivity of methane in excellent agreement with experiment. This study suggests, for the first time, that ab initio energies-in addition to experimental data-can form a good basis for derivation of accurate classical potentials between organic and inorganic elements.

Journal Article↗

Dihydrogen and methane elimination from adducts formed by the interaction of carbenium and silylium cations with nucleophiles.

Stationary points for reactions R'R' 'HX(+) + YH --> [R'R' 'X-Y](+) + H(2) (I) and R'(CH(3))HX(+) + YH -->[R'HX-Y](+) + CH(4) (II) (R', R' ' = CH(3), H; X = C, Si; Y = CH(3)O, (CH(3))(2)N, and C(6)H(5)) are located and optimized by the B3LYP/aug-cc-pVDZ method. A similar mechanism was found to be operative for both types of reactions with X = C and X = Si. Formation of the intermediate (adduct) results in the transfer of electron density from the electron-rich bases to the X atoms and in the growth of a positive charge on a hydrogen atom attached to Y. This mobile proton may shift from Y to X, and the relative energies of transition states for elimination reactions (Delta) depend on the ability of the X atom to retain this proton. Therefore, Deltagrows on going from Si to C and with increasing numbers of methyl substituents. For X = C, the Deltavalue for both reactions correlates well with the population of the valence orbitals of X in a wide range from -44 kcal/mol (methyl cation/benzene) to 31 kcal/mol (isopropyl cation/methanol). For X = Si this range is more narrow (from -19 to -5.0 kcal/mol), but all Delta values are negative with the exclusion of silylium ion/benzene systems, adducts of which are pi- rather than sigma-complexes. The energy minima for product complexes for H(2) elimination are very shallow, and several are dissociative. However, complexes with methane which exhibit bonding between X and the methane hydrogen are substantially stronger, especially for systems with X = Si. The latter association energy may reach 8 kcal/mol (Si...H distance is 2 A).

Journal Article↗

Mild, aqueous, aerobic, catalytic oxidation of methane to methanol and acetaldehyde catalyzed by a supported bipyrimidinylplatinum-polyoxometalate hybrid compound.

We have demonstrated that a bipyrimidinylplatinum-polyoxometalate, [Pt(Mebipym)Cl2]+[H4PV2Mo10O40]-, supported on silica is an active catalyst for the aerobic oxidation of methane to methanol in water under mild reaction conditions. Further oxidation of methanol yields acetaldehyde. The presence of the polyoxometalate is presumed to allow the facile oxidation of a Pt(II) intermediate to a Pt(IV) intermediate and to aid in the addition of methane to the Pt catalytic center.

Journal Article↗