Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DENTAL CAVITY LINING”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources

Microleakage of a new cavity varnish with a high-copper spherical amalgam alloy.

In a study in vitro Copalite and Barrier cavity varnishes were applied to the walls of class 1 prepared cavities before placing Tytin, a high-copper amalgam. Tests with 45Ca and autoradiographs showed that at six months only Copalite was effective in preventing microleakage. At one year neither Barrier nor Copalite was preventing leakage.

Copper↗

[Experimental study of the effect of a photopolymerizable glass ionomer cavity liner on pulp pressure and temperature].

The biocompatibility of a light curing glass ionomer cement was studied for its pulpal effect when used as a capping agent in a dentin cavity. Pulpal pressure and temperature were recorded in 14 dog canines after placement of the glass ionomer cement. No increase was observed in 12 specimens on 14 samples. These results indicate that no pulpal effect can be demonstrated when using Vitrabond as a dentin capping agent.

Animals↗

Class II composite resin restorations: a three-year clinical study of six different posterior composites.

Class II restorations of five light-cured posterior composite materials (Occlusion, P 30, Fulfil, Profile and Heliomolar) were followed for three years, and restorations of another material (Distalite) were followed for two years. Twenty-four dentists from The Public Dental Health Service in the county of Bohuslän placed 242 Class II restorations in 213 patients. The restorations were evaluated after three years using the USPHS criteria. Stone casts were used to categorize quantitatively the amount of occlusal wear according to the Leinfelder method. No differences could be found between the different materials regarding clinical properties. The failure rate (USPHS ratings Charlie) was low, 6.5 per cent. The average occlusal wear after three years for most of the materials was about 100 micrometers. Heliomolar showed a better resistance to wear compared with the other materials.

Acid Etching, Dental↗

In vitro assessment of the microleakage around preventive resin (laminate) restorations.

The purpose of this study was to evaluate in vitro, the microleakage of laminate restorations using two resin systems and the influence of etching and curing regimen on the leakage. A total of 135 extracted, human third molars with similar occlusal dimensions were chosen. Cavities were prepared and the teeth were then separated into nine groups of fifteen teeth each. The incidence of microleakage in this study varied between no leakage and 46.7 percent. Leakage of preventive resin restorations was reported to occur in 16.7 percent to 25 percent of cases. The fact that the variables tested in this study had no significant effect on the microleakage would suggest that the leakage is dependent on that of the fissure sealant. The group restored with a fissure sealant containing releasable fluoride and an adhesion promoter performed well in this study.

Acid Etching, Dental↗

[Pulp toxicity of the acid components of acid-base reaction cements].

Laser-Doppler-flowmetry enables us to assess microcirculatory changes in the tooth pulp. This method can also be used for testing the histocompatibility of dental materials. The acid components of Tenet and Ketac-Cem are examined for tissue tolerance. This is done by assessing the incisal and apical changes in pulpal microcirculation. The phosphoric acid of Tenet causes an almost complete collapse of the incisal microcirculation just a short time after its application. The tartrate of Ketac-Cem causes long-lasting hyperaemia, whereas the acryl-maleinate-copolymer has no discernible effects.

Animals↗

Time required for placement of composite versus amalgam restorations.

This study was designed to develop an indirect method for measuring the time required for restoration placement; and to compare the operator time required for placement of amalgam and composite resins in posterior teeth in children. Forty children, aged seven to nine years old, were selected to participate. Either amalgam or an experimental resin was used to restore the primary and permanent molars. All restorations and sealants were completed under the rubber dam. Each restorative appointment was videotaped with a color video camera mounted on the ceiling. Ninety-six restorative procedures were reviewed and evaluated for the amount of time necessary to accomplish them. The Class I permanent molar composite restoration required 35 percent more insertion and finishing time than did the amalgam.

Bicuspid↗

Protective effects of cavity liners on dentin.

Smear layers are very soluble in acidic solutions. Removal of smear layers increases dentin permeability and the potential for pulpal irritation. In this study, smear layers were treated with either saline, Barrier, Copalite, LC-Scotchbond, Hydroxyline, or DDS 1 & 2 to determine how well they protected the dentin from subsequent acid attack with 37% phosphoric acid for two minutes. Using both SEM and permeability measurements, the materials were ranked from least to most effective as: Saline less than Barrier = Copalite less than Hydroxyline = Scotchbond = DDS 1 & 2.

Acid Etching, Dental↗

Microleakage of glass ionomer/composite laminate Class V restorations.

The aim of this investigation was to evaluate the effects on microleakage of pretreating dentin with polyacrylic acid (PAA), prior to placing a glass ionomer base/composite laminate restoration. Class V erosion-type lesions with the incisal margin on enamel and the cervical margin below the cemento-enamel junction (CEJ), were prepared in 50 sound extracted teeth. These teeth were divided into five dentin treatment groups: A) 10% PAA; B) 20% PAA; C) and D) 40% PAA; E) no dentin preconditioning. In groups A, B, C and E, a glass ionomer base was placed within 1 mm of the margins. In group D the glass ionomer base extended to the cervical margin. The glass ionomer base and the incisal enamel were etched with 37% phosphoric acid prior to placing a bonding agent and restoring with a composite. The restorations were finished and polished and the teeth were stored in distilled water at 37 degrees C for 7 days. They were thermocycled in 0.5% fuchsin dye for 500 cycles (5 degrees C to 60 degrees C), embedded in epoxy resin, and sectioned at 250 mu intervals through the restorations. The section of each tooth exhibiting the most severe dye penetration along the tooth/restoration interface was evaluated and scored both incisally and cervically: 0 = no leakage; 1 = leakage up to the glass ionomer base; 2 = leakage up to 1/2 the wall length; 3 = leakage exceeding 1/2 the wall length. Cervically, the median leakage for all groups was 3.0. Incisally, the median leakage for all the groups was 0.0.(ABSTRACT TRUNCATED AT 250 WORDS)

Acrylic Resins↗

Practical considerations concerning glass ionomer cements used for basing amalgam restorations.

Despite the intense interest in composite resins, amalgam is still the direct restorative material of choice in posterior teeth where there are significant occlusal forces. The criteria for basing an amalgam are ill-defined, and the research regarding the use of cavity varnish is equivocal. The purpose of this article is to examine the clinical characteristics of six glass ionomer cement materials, currently being marketed as base/liner materials, when used for basing amalgam restorations. It is not the purpose of this article to set criteria for use of a base.

Color↗

[Adhesion of liners to dentin. In vivo experiments].

Research was performed in vivo on 42 vital teeth. Cavities of I and V Class where made, than restored with glass ionomer liners and composites. The teeth were extracted, stained and sectioned. Optic microscope did not show any stain under the ionomer liner, even in cases where composites were infiltrated. Electron microscope did not show any gap between ionomer liner and dentin.

Adhesiveness↗

Better restorative, greater prevention.

The dentist must fully appreciate that restorative procedures, done well, are an integral part of prevention. Poorly condensed materials and poorly adapted margins of restorations are often the reasons for marginal leakage, recurrent caries and pulp involvement.

Dental Caries↗

Effectiveness of a universal adhesive on dentine--an in-vitro study.

The purpose of this study was to test the effectiveness of a universal bonding agent (Prisma Universal Bond) when used in dentine cavities. The measurement of marginal contraction gaps was the basis for determining the effectiveness of this bonding agent. The use of the bonding agent led to a significant reduction in restoration marginal gaps. Thermocycling of restorations with the bonding agent resulted in a widening of the marginal gaps though this was not significant. It was interesting to note that some thermocycled restorations showed no marginal gaps.

Adhesives↗

[Optical and scanning electron microscope study of gingival microleakage in Class II composite restorations].

It has been studied the gingival microleakage and the polymerization contraction gap in composites class II restorations. The influence of two different composites, a microparticle [Heliomolar (Vivadent)] and a high filled one [P-50 (3M)], has been compared with different adhesion systems: a) gingival enamel acid-etch technique. b) Dentinal adhesives [Gluma (Bayer) and Scotchbond 2 (3M)]. c) A adhesive varnish [Dentin Protector (Vivadent)]. The gingival microleakage is only prevented when a microparticle composite [Heliomolar (Vivadent)] and a adhesive varnish [Dentin Protector (Vivadent)] are used together.

Acid Etching, Dental↗