Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Assembly process”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52Linked to original sources
PubMed2004

Perfect orientation ordered in-situ one-dimensional self-assembly of Mn-doped PbSe nanocrystals.

We demonstrate a novel approach for the large-scale, shape-controlled synthesis of one-dimensional (1D) corrugated nanoarrays of Pb(1-x)Mn(x)Se nanocrystals (0.002 < or = x < or = 0.008) through an in-situ self-assembly without using either capping polymer or ionic surfactant. The one-step-prepared 1D nanoarrays exhibit a well-defined morphology, single-crystal orientation, and clean surface without amorphous contamination. The average diameter of the 1D nanoarrays can be controlled and varied from <10 to 80 nm by finely tuning the assembly temperature and the growth time. Four growth models were suggested to explain the in-situ self-assembly processes based on the fundamental building blocks of octahedral nanocrystals by sharing [111] facets.

Journal Article↗
PubMed2004

Self-recognition, structure, stability, and guest affinity of pyrogallol[4]arene and resorcin[4]arene capsules in solution.

In the present study, we used diffusion NMR to probe the structures and characteristics of the products obtained from the self-assembly of resorcin[4]arenes 1a and 1b and pyrogallol[4]arenes 2a and 2b in CDCl(3) solutions. It was found that all four molecules self-assemble into hexameric capsules. The hexameric capsules of pyrogallol[4]arenes 2a and 2b were found to be more stable than the capsules of resorcin[4]arenes 1a and 1b in polar media. We also studied the role of water molecules in the self-assembly of the different capsules and found that water molecules are part of the hexameric capsules of resorcin[4]arenes 1a and 1b but not in the capsules of pyrogallol[4]arenes 2a and 2b. It was found that the self-assembly process between the resorcin[4]arenes and pyrogallol[4]arenes proceeds with self-recognition. When mixing two macrocycles of different types in a chloroform solution, no heterohexamers are formed, only the capsule constructed from the same macrocycle is detected. However, when two resorcin[4]arenes (i.e., 1a and 1b) or two pyrogallol[4]arenes (i.e., 2a and 2b) are mixed, heterohexamers are formed over time. In addition, we found that resorcin[4]arenes and pyrogallol[4]arenes differ significantly in their guest affinity. The capsules of 1a and 1b can accommodate both the tertiary alkylamines and their respective ammonium salts, while the capsules of 2a and 2b encapsulate only the neutral tertiary alkylamines.

Journal Article↗
PubMed2004

Highly efficient dye-sensitized solar cells with a titania thin-film electrode composed of a network structure of single-crystal-like TiO2 nanowires made by the "oriented attachment" mechanism.

In this study, single-crystal-like anatase TiO(2) nanowires were formed in a network structure by surfactant-assisted self-assembling processes at low temperature. The crystal lattice planes of the nanowires and networks of such wires composed of many nanoparticles were almost perfectly aligned with each other due to the "oriented attachment" mechanism, resulting in the high rate of electron transfer through the TiO(2) nanonetwork with single-crystal-like anatase nanowires. The direction of crystal growth of oriented attachment was controlled by changing the mole ratio of acetylacetone to Ti, that is, regulating both the adsorption of surfactant molecules via control of the reaction rate and the surface energy. A single-crystalline anatase exposing mainly the [101] plane has been prepared, which adsorbed ruthenium dye over 4 times higher as compared to P-25. A high light-to-electricity conversion yield of 9.3% was achieved by applying the titania nanomaterials with network structure as the titania thin film of dye-sensitized solar cells.

Journal Article↗
PubMed2004

Synthesis of n-type perylene bisimide derivatives and their orthogonal self-assembly with p-type oligo(p-phenylene vinylene)s.

Four different (chiral) electron-deficient (n-type) perylene bisimides containing aliphatic, aromatic, or ethyleneoxide side chaines have been synthesized and fully characterized. All of them form supramolecular stacks in apolar methylcyclohexane (MCH) solution as demonstrated by concentration- and temperature-dependent absorption, circular dichroism, and fluorescence studies. One derivative was investigated in more detail in the solid state and proven to be liquid crystalline and capable of forming nanometer-sized fiberlike networks when drop-cast from MCH. Optical spectroscopy techniques show that perylene bisimide and an oligo(p-phenylene vinylene) (p-type) derivative orthogonally self-assemble into separate nanosized p-and n-type stacks in MCH. In contrast in toluene only molecularly dissolved species are present. In films deposited from MCH as well as from toluene photoinduced electron transfer takes place from the p-type material to the n-type material. As a result of the orthogonal self-assembly process, in films from MCH an ordered network of fibers was formed, whereas in films from toluene no ordering was observed. However, probably due to the lateral orientation on the surface and the presence of long aliphatic chains pointing toward the electrodes, efficient bulk heterojunction solar cells could not be constructed.

Journal Article↗
PubMed2005

Semiconductor rings fabricated by self-assembly of nanocrystals.

Three types of nonlinear organization schemes for creating ringlike semiconductors have been elucidated with the self-assembly of nanocrystals in aqueous phase under one-pot conditions. The synthetic architecture is based on morphological controls of primary nanocrystals which possess an intrinsic hexagonal symmetry. As most semiconducting materials have similar hexagonal (or cubic) crystal symmetries, in principle, the self-assembling processes revealed in this work should be extendable to other semiconductor nanocrystals.

Journal Article↗
PubMed2006

Monoliths of aligned silica-polypeptide hexagonal platelets.

Water soluble alpha-helical polypeptides were used to prepare silica coated hexagonal single crystal platelets in concentrated solutions. To our knowledge, there is no other instance where polymer single crystals, typically formed under high dilution, can be grown in a bulk material. This unprecedented self-assembly process relies on complex cooperative interactions where silica condensation mediates the growth of polypeptide crystals, which in turn template silica overgrowth. The helices were also used to align samples giving monoliths composed of highly oriented layers of platelets. Overall, this procedure allows preparation of composites with good structural order and complexity via a simple biomimetic process.

Biomimetic Materials↗
PubMed2006

Supramolecular self-assembly of dendronized polymers: reversible control of the polymer architectures through acid-base reactions.

Acid-base switchable supramolecular dendronized polyacetylenes (DPAs) with increasing steric bulk on going from generation one [G1] to three [G3], were constructed using multiple self-assembly processes between Fréchet-type [G1]-[G3]-dendritic dialkylammonium salts and a dibenzo[24]crown-8-containing polymer. The formation of the supramolecular systems is acid-base switchable to either an ON (rodlike dendronized polymers) or an OFF (flexible polymers) state. Thus, by controlling the superstructures of the supramolecular polymers with the [G1]-[G3] dendrons, it is possible to induce conformational changes within the polymer backbones. The supramolecular dendronized polymers, as well as their threading-dethreading properties, were characterized by (1)H NMR and UV absorption spectroscopies, gel permeation chromatography (GPC) and light scattering (LS). Independent measures of molecular weight (GPC, LS) indicate that DPAs behave as increasingly rigid macromolecules with each generation in solution. Molecular dynamics simulations of each DPA suggest that the lengths of the polymer backbones increase accordingly. Atomic force microscopy of the [G3]-dendronized polystyrene (DPS), as well as the DPAs, reveal surface morphologies indicative of aggregated superstructures.

Journal Article↗
PubMed2006

Formation of ordered mesoporous films from in situ structure inversion of azo polymer colloidal arrays.

This work shows that mesoporous polymeric films with spherical and elliptical pores can be obtained by in situ structure inversion of the azo polymer colloid arrays through selective interaction with solvent. The epoxy-based azo polymer contained both the pseudo-stilbene-type azo chromophores and the hydrophilic carboxyl groups. The colloidal spheres of the azo polymer were prepared by gradual hydrophobic aggregation of the polymeric chains in THF-H2O media, induced by a steady increase in the water content. Ordered 2D arrays of the hexagonally close-packed colloidal spheres were obtained by the vertical deposition method. After the solvent (THF) annealing, the ordered 2D arrays were directly transformed to mesoporous films through the sphere-pore inversion. Under the same condition, the 2D arrays composed of the ellipsoidal colloids, which were obtained by the irradiation of a polarized Ar+ laser beam on the colloidal sphere arrays, could be transformed to films with ordered elliptical pores. To our knowledge, this is the first example to demonstrate that mesoporous structures can be directly formed from the colloidal arrays of a homopolymer through structure inversion. This observation can shed new light on the nature of self-assembly processes and provide a feasible approach to fabricate mesoporous structures without the infiltration-removal step. By exploring the photoresponsive properties of the materials, mesoporous film with special pore structure and properties can be expected.

Journal Article↗
PubMed2006

A gold nanoparticle based approach for screening triplex DNA binders.

Nanoparticle assemblies interconnected with DNA triple helixes can be used to colorimetrically screen for triplex DNA binding molecules and simultaneously determine their relative binding affinities based on melting temperatures. Nanoparticles assemble only when DNA triple helixes form between DNA from two different particles and a third strand of free DNA. In addition, the triple helix structure is unstable at room temperature and only forms in the presence of triplex DNA binding molecules which stabilize the triple helix. The resulting melting transition of the nanoparticle assembly is much sharper and at a significantly higher Tm than the analogous triplex structure without nanoparticles. Upon nanoparticle assembly, a concomitant red-to-blue color change occurs. The assembly process and color change do not occur in the presence of duplex DNA binders and therefore provide a significantly better screening process for triplex DNA binding molecules compared to standard methods.

Base Sequence↗
PubMed2006

Sequence-specific detection of femtomolar DNA via a chronocoulometric DNA sensor (CDS): effects of nanoparticle-mediated amplification and nanoscale control of DNA assembly at electrodes.

We herein report a novel nanoparticle-based electrochemical DNA detection approach. This DNA sensor is based on a "sandwich" detection strategy, which involves capture probe DNA immobilized on gold electrodes and reporter probe DNA labeled with gold nanoparticles that flank the target DNA sequence. Electrochemical signals are generated by chronocoulometric interrogation of [Ru(NH(3))(6)](3+) that quantitatively binds to surface-confined capture probe DNA via electrostatic interactions. We demonstrated that the incorporation of a gold nanoparticle in this sensor design significantly enhanced the sensitivity and the selectivity. Nanoscale control of the self-assembly process of DNA probes at gold electrodes further increased the sensor performance. As a result of these two combined effects, this DNA sensor could detect as low as femtomolar (zeptomoles) DNA targets and exhibited excellent selectivity against even a single-base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.

DNA↗
PubMed2006

Toward monodispersed silver nanoparticles with unusual thermal stability.

A novel in situ autoreduction route has been developed, by which monodispersed silver nanoparticles with tunable sizes could be easily fabricated on silica-based materials, especially inside the channels of mesoporous silica (MPS). 13C CP/MAS NMR spectroscopy was employed to monitor the whole assembly process. It was demonstrated that the amino groups of APTS (aminopropyltriethoxyl silane)-modified MPS can be used to anchor formaldehyde to form novel reducing species (NHCH2OH), on which Ag(NH3)2NO3 could be in situ reduced. Monodispersed silver nanoparticles were thus obtained. In situ XRD and in situ TEM experiments were used to investigate and compare the thermal stabilities of silver nanoparticles on the external surface of silica gels (unconfined) and those located inside the channels of SBA-15 (confined). It was observed that unconfined silver nanoparticles tended to agglomerate at low temperatures (i.e., lower than 773 K). The aggregation of silver nanoparticles became more serious at 773 K. However, for those confined silver nanoparticles, no coarsening process was observed at 773 K, much higher than its Tammann temperature (i.e., 617 K). Only when the treating temperature was higher than 873 K could the agglomeration of those confined silver nanoparticles happen with time-varying via the Ostwald ripening process. The confinement of mesopores played a key role in improving the thermal stabilities of silver nanoparticles (stable up to 773 K without any observable coarsening), which is essential to the further investigations on their chemical (e.g., catalytic) properties.

Journal Article↗
PubMed2006

Peptide-directed microstructure formation of polymers in organic media.

Synthesis and peptide-guided self-assembly of an organo-soluble peptide-polymer conjugate, comprising a sequence-defined polypeptide and a poly(n-butyl acrylate), are described. The amino acid sequence of the peptide encodes a high tendency to adopt an antiparallel beta-sheet motif, and thus programs the formation of tapelike microstructures. Easy synthesis and controllable self-assembly is ensured by the incorporation of structure breaking switch defects into the peptide segment. This suppresses temporarily the aggregation tendency of the conjugate as shown by circular dichroism, infrared spectroscopy (FT-IR), and atomic force microscopy (AFM). A pH-controlled rearrangement in the switch segments restores the native peptide backbone, triggering the self-assembly process and leading to the formation of densely twisted tapelike microstructures as could be observed by AFM and transmission electron microscopy. The resulting helical superstructures, when deposited on a substrate, are 2.9 nm high, 10 nm wide, and up to 2.3 mum long. The helical pitch is about 37 nm, and the pitch angle is 48 degrees . The helical superstructures undergo defined entanglement to form superhelices, leading to the formation of soft, continuous organo-gels. A twisted two-dimensional core-shell tape is proposed as a structure model, in which the peptide segments form an antiparallel beta-sheet with a polymer shell.

Circular Dichroism↗
PubMed2006

Liquid-crystalline polymers from cationic dendronized polymer-anionic lipid complexes.

The use of cationic dendronized polymers as a polyelectrolytic system for templating thermotropic liquid-crystalline phases (LC) via complexation and self-assembly with counter-charged ionic lipids is described. The topology of the LC phases resulting from the self-assembly process, their lattice parameter, and the interpenetration of lipid chains is discussed via birefringency analysis and small-angle X-ray scattering. Depending on the generation of the dendronized polymer and the length of the alkyl chains, amorphous, lamellar, and columnar tetragonal phases are observed. A structural model is proposed which accounts for the systematic variations of alkyl chain length as well as polymer generation. Owing to the reversible nature of the ionic complexation, this process proves high relevance for nanoporous channels, biomimetic, transport, and nanotemplating applications.

Journal Article↗
PubMed2006

Photoreversibly switchable superhydrophobic surface with erasable and rewritable pattern.

We report the facile fabrication of a functional nanoporous multilayer film with wettability that is reversibly tunable between superhydrophobicity and superhydrophilicity with UV/visible irradiation. Our approach controls surface roughness with an electrostatic self-assembly process and makes use of the photoresponsive molecular switching of fluorinated azobenzene molecules. Selective UV irradiation onto the nanostructured substrate was used to realize substrates with erasable and rewritable patterns of extreme wetting properties. Our findings will open up new avenues for external stimuli-responsive smart surfaces.

Journal Article↗
PubMed2004

Viologen-calix[6]arene pseudorotaxanes. Ion-pair recognition and threading/dethreading molecular motions.

A calix[6]arene wheel, whose cavity has been extended and rigidified by N-phenylureido groups on the upper rim, forms pseudorotaxane species with molecular axles containing the viologen (4,4'-bipyridinium) unit in CH(2)Cl(2) solution. In these conditions, the self-assembly process is very efficient, with associated DeltaG degrees values of around -8 kcal mol(-1). The counteranions of the bipyridinium-based threads play indeed an important role in the formation of the complex. The use of either tosylate or hexafluorophosphate salts of the guests affects both the stability of the complexes and the rate of the threading process. Such effects have been interpreted in terms of ion-pair recognition, suggesting that coordination of the counteranions of the viologen thread by the ureido groups of the calixarene wheel is crucial for the breaking of tight ion pairs prior to threading. The rate constants of the threading/dethreading reactions coupled with the redox processes of the viologen unit of the axle have been obtained by means of cyclic voltammetry. The pseudorotaxane species undergo fast dethreading (submicrosecond time scale) on electrochemical reduction of the guest. The heterogeneous electron-transfer kinetics for the reduction of the viologen unit is slowed upon encapsulation into the calixarene cavity.

Journal Article↗
PubMed1997

Recognition of Bipyridinium-Based Derivatives by Hydroquinone- and/or Dioxynaphthalene-Based Macrocyclic Polyethers: From Inclusion Complexes to the Self-Assembly of [2]Catenanes.

A range of pi-electron-rich macrocyclic polyethers incorporating dioxybenzene (hydroquinone) and/or dioxynaphthalene units have been synthesized in good yields by simple two-step procedures. These macrocycles are able to bind bipyridinium-based guests as a result of a series of cooperative noncovalent bonding interactions. These molecular recognition events can be extended to the self-assembly of [2]catenanes incorporating the bipyridinium-based cyclophane, cyclobis(paraquat-p-phenylene), and the macrocyclic polyethers incorporating dioxybenzene and -naphthalene units. The efficiencies of these self-assembly processes were found to depend upon the stereoelectronic features of the pi-electron-rich macrocycles-namely, the nature and the substitution pattern of the aromatic units. X-ray crystallographic analysis of some of these [2]catenanes proved unequivocally the relative geometries of the interlocked components. In addition, in the case of those asymmetric [2]catenanes incorporating two different aromatic units within their macrocyclic polyether components, only one of the expected two translational isomers was observed in the solid state. In particular, in all the structures examined, the 1,4-dioxybenzene and 1,5-dioxynaphthalene units are located within the cavity of the tetracationic cyclophane component in preference to other regioisomeric dioxynaphthalene units that reside alongside. Variable-temperature (1)H NMR spectroscopic investigation of the geometries adopted by these [2]catenanes in solution revealed the same selectivity that was observed for one translational isomer over another in the solid state.

Journal Article↗
PubMed1997

Translational Isomerism in Some Two- and Three-Station [2]Rotaxanes.

The template-directed syntheses of three [2]rotaxanes are described. They all have dumbbell components, with both hydroquinone and resorcinol rings inserted into polyether chains terminated by tetraarylmethane stoppers, that become encircled during the key self-assembly processes by the tetracationic cyclophane, cyclobis(paraquat-p-phenylene), with its two pi-electron deficient bipyridinium units. It has been demonstrated by low-temperature (1)H NMR spectroscopy that the pi-electron deficient tetracationic cyclophane has a remarkably high preference to reside around the hydroquinone ring in these molecular shuttles. This observation illustrates how a very small constitutional difference-hydroquinone versus resorcinol recognition sites-can lead to the overwhelming preference for one translational isomer over another in this particular range of [2]rotaxanes.

Journal Article↗
PubMed2005

Self-assembly of ordered 3D Pd nanospheres at a liquid/liquid interface.

A novel route for the self-assembly of nanoparticles to nanospheres at a liquid/liquid interface has been developed to prepare palladium nanospheres. It has proved that the interface offers an excellent site and plays a key role in the self-assembly of nanoparticles to nanospheres. The palladium nanospheres are characterized by electron microscopy, energy-dispersive X-ray analysis, UV-visible spectroscopy, X-ray diffraction spectroscopy, and X-ray photoelectron spectroscopy. The mechanism of the self-assembly process is also proposed.

Journal Article↗