Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Films”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
PubMed1990

Film-induced negative affect triggers overeating in restrained eaters.

We tested the effects of film-induced negative affect (i.e., exposure to a frightening film) in 60 women classified as either restrained or unrestrained eaters on the basis of their responses to the Revised Restraint Scale (Herman & Polivy, 1980). Exposure to the frightening film, in contrast to a neutral film, was associated with increases in anxiety, sadness, and anger. High restraint subjects exposed to the frightening film ate more than did equally restrained subjects exposed to a neutral film or low restraint subjects exposed to either film. Thus, negative affect triggered overeating among restrained eaters. Although unrestrained eaters exposed to the frightening film ate less than those who viewed the neutral film, this difference was not statistically significant. These results suggest that negative affect may prompt overeating in persons who attempt to restrict their caloric intake.

Adult↗
PubMed2001

Near infrared reflectance spectroscopy for the fast identification of PVC-based films.

Near infrared (NIR) reflectance spectroscopy was used to develop a non-destructive and rapid qualitative method for the analysis of plastic films used by the pharmaceutical industry for blistering. Three types of films were investigated: 250 microm PVC [poly(vinyl chloride)] films, 250 microm PVC films coated with 40 g m(-2) of PVDC [poly(vinylidene dichloride)] and 250 microm PVC films coated with 5 g m(-2) of TE (Thermoelast) and 90 g m(-2) of PVDC. Three analyses were carried out using different pre-treatment options and a PLS (partial least squares) algorithm. Each analysis was aimed at identifying one type of film and rejecting all types of false sample (different thickness, colour or layer). True and false samples from four plastics manufacturers were included in the calibration sets in order to obtain robust methods that were suitable regardless of the supplier. Specificity was demonstrated by testing validation sets against the methods. The tests showed 0% of type I (false negative identification) and 1% of type II errors (false positive identification) for the PVC method, 13 and 3%, respectively, for the PVC-PVDC method and no error for the PVC-TE-PVDC method. Type II errors, mostly due to the slight sensitivity of the methods to film thickness, are easily corrected by simple thickness measurements. This study demonstrates that NIR spectroscopy is an excellent tool for the identification of PVC-based films. The three methods can be used by the pharmaceutical industry or plastics manufacturers for the quality control of films used in blister packaging.

Drug Packaging↗
PubMed2003

Preparation and characterisation of novel thick sol-gel titania film photocatalysts.

The preparation and characterization of thick (9 microns), clear, mechanically robust and photocatalytically active films of nanocrystalline anatase titania are described. XRD and SEM analysis show the films comprise 13 nm particles of anatase TiO2. Thin (54 nm) films of the 'paste' TiO2, along with sol-gel titania films made by a more traditional route are also prepared and characterised. All titania films mediate the photocatalytic destruction of stearic acid with a quantum yield of 0.0016 +/- 0.0003, using either 365 nm (i.e. BLB) or 254 nm (germicidal) light. P25 TiO2 films also appear to mediate the same process with a similar formal quantum efficiency. Of all the films tested, the thick paste TiO2 films are the most ideally suited for use with near UV light, for reasons which are discussed. All the titania films tested exhibit photoinduced superhydrophilicity.

Journal Article↗
PubMed2006

Photochemical electron transfer through [corrected] the interface of hybrid films of titania nano-sheets and mono-dispersed spherical mesoporous silica particles.

Photochemical Electron Transfer (ET) between an organic dye, the porphyrin derivative TMPyP, and an electron acceptor, methyl viologen MV2+, have been investigated at the interface of two different inorganic films, i.e., layered titania nano-sheets (TNS) and a monolayer film of spherical and mono-dispersed mesoporous silica (sMPS) particles (ca. 0.5 microm). TMPyP ions were intercalated within the sMPS nano-cavities to form (TMPyP-sMPS) while MV2+ ions were intercalated into the TNS interlayers to form (MV2+-TNS). The (TMPyP-sMPS) and (MV2+-TNS) films were then stacked on a silica substrate in this order to form a (MV2+-TNS)/(TMPyP-sMPS) film and, upon UV light irradiation, ET could be induced. However, when this film was stacked inversely, i.e., for the (TMPyP-sMPS)/(MV2+-TNS) films on a silica substrate, no photoinduced ET were observed. Interestingly, however, even for this photo-inactive inversely stacked film, ET could be generated by inserting a gold vapor-deposited layer between the (MV2+-TNS) and (TMPyP-sMPS) films. The conjugation conditions at the interface of the inversely stacked (TMPyP-sMPS)/(MV2+-TNS) hybrid film were, thus, confirmed to strongly affect the photoinduced electron transfers and their efficiencies.

Biocompatible Materials↗
PubMed2000

Atomic force microscopy imaging of polycrystalline CuInSe2 thin films

In this study, atomic force microscopy (AFM) imaging has been used to study the structural properties of polycrystalline CuInSe2 films, which are widely used as absorber materials in thin film solar cell devices. This technique demonstrated an excellent capability for the reproducible imaging of these rough polycrystalline materials. AFM imaging in combination with statistical analysis revealed distinct differences in the structural properties (i.e. grain width and height distributions, root-mean-square (RMS) and peak to valley (R(p-v)) roughness values) as a function of the specific growth technique used and the bulk composition of the films. In the case of Cu-rich films, prepared by the H2Se/Ar treatment of Cu/In/Cu alloys, rough surface structures were in general observed. Statistical analysis revealed two distinct distribution of grains in these samples (1.0-2.5 &mgr;m and 3-5.5 &mgr;m) with large RMS and R(p-v) roughness values of 380 nm and 2.6 &mgr;m, respectively. In-rich films were characterized by the presence of much smaller, roughly circular clusters with a significant reduction in both the width and height distributions as well as RMS and R(p-v) roughness values. The most successful growth techniques, in terms of producing homogeneous and dense films, were in the cases of H2Se/Ar treated metallic InSe/Cu/InSe alloys and the coevaporation of all materials to form CuInSe2. Both these techniques produced absorber films with very narrow grain width and height distributions as well as small roughness values. It was possible to establish that high efficiency devices are associated with the use of absorber films with narrow width distributions between 0.5 and 2 &mgr;m and small RMS (> 300 nm) roughness values. These values are used as a figure of merit in our laboratories to evaluate the structural properties of our CuInSe2 thin films.

Journal Article↗
PubMed2002

Characterization of nitride thin films by electron backscatter diffraction.

Thin films incorporating GaN, InGaN and AlGaN are presently arousing considerable excitement because of their suitability for UV and visible light-emitting diodes and laser diodes. However, because of the lattice mismatch between presently used substrates and epitaxial nitride thin films, the films are of variable quality In this paper we describe our preliminary studies of nitride thin films using electron backscattered diffraction (EBSD). We show that the EBSD technique may be used to reveal the relative orientation of an epitaxial thin film with respect to its substrate (a 90 degrees rotation between a GaN epitaxial thin film and its sapphire substrate is observed) and to determine its tilt (a GaN thin film was found to be tiltedby 13 +/- 1 degrees towards [1010]GaN), where the tilt is due to the inclination of the sapphire substrate (cut off-axis by 10 degrees from (0001)sapphire towards (1010)sapphire). We compare EBSD patterns obtained from As-doped GaN films grown by plasma-assisted molecular beam epitaxy (PA-MBE) with low and high As4 flux, respectively. Higher As4 flux results in sharper, better defined patterns, this observation is consistent with the improved surface morphology observed in AFM studies. Finally, we show that more detail can be discerned in EBSD patterns from GaN thin films when samples are cooled.

Journal Article↗
PubMed2000

Promotive effects of a silk film on epidermal recovery from full-thickness skin wounds.

We examined the effects of the transparent fibroin film (silk film) on full-thickness skin wounds. Full-thickness dermatotomies (15 mm x 9 mm) were prepared on the dorsal wall of CRJ:CD-1 nu/nu (ICR nu/nu) mice. The area of the wounds dressed with silk film was reduced to 10% of that made by the dermatotomy 14 days after the dermatotomy and were covered with regenerated epidermis 21 days after the dermatotomy. In contrast, less recovery and epidermal regeneration were found 14 days after dermatotomy in the wounds dressed with a conventional hydrocolloid dressing (Duro Active). Furthermore, only partial incomplete epidemal growth was obtained 21 days after dermatotomy. Most importantly, the healing time of wounds dressed with silk film was 7 days shorter than those dressed with DuoActive dressing. The silk film showed an almost similar or slightly better promotive effect as the lyophilized porcine dermis (Alloask D), which is used as a dressing for burns, ulcers, and decubitis. Histologic findings revealed that there was greater collagen regeneration and less inflammation and neutrophil-lymphocyte infiltration of the wounds dressed with silk film than with DuoActive dressing. It is clear that regeneration of the epidermis and dermis of the wound beds covered with silk film was faster than with DuoActive dressing. Finally, silk film is easily obtainable, sterilizable, and transparent, and it allows easy observation of tissue recovery. Therefore, silk film offers advantages over other dressings and may be clinically useful for wound treatment.

Animals↗
PubMed2005

Local dynamic mechanical properties in model free-standing polymer thin films.

High-frequency sinusoidal oscillations of a coarse-grained polymer model are used to calculate the local dynamic mechanical properties (DMPs) of free-standing polymer thin films. The storage modulus G(') and loss modulus G(") are examined as a function of position normal to the free surfaces. It is found that mechanically soft layers arise near the free surfaces of glassy thin films, and that their thickness becomes comparable to the entire film thickness as the temperature approaches the glass transition T(g). As a result, the overall stiffness of glassy thin films decreases with film thickness. It is also shown that two regions coexist in thin films just at the bulk T(g); a melt-like region (G(') G(")) in the middle of the film. Our findings on the existence of a heterogeneous distribution of DMPs in free-standing polymer thin films provide insights into recent experimental measurements of the mechanical properties of glassy polymer thin films.

Journal Article↗
PubMedDate not supplied

Photocatalytic activity of TiO2 particulate films prepared by depositing TiO2 particles with various sizes.

TiO2 particles of various sizes were prepared by grinding in cyclohexanone, and TiO2 particulate films were obtained by depositing these TiO2 particles with various sizes onto a glass or quartz substrate. The effect of the particle size and thickness on the photocatalytic properties of the films was evaluated via oxidative degradation of gaseous 2-propanol. The initial rate of 2-propanol degradation under UV light irradiation for the films deposited with 30 nm TiO2 particles increased with increasing film thickness up to 600 nm, and reached a saturated value above this film thickness. Photocatalytic activity for the films with thickness below 600nm was larger when smaller TiO2 particles were deposited onto the substrate, due to the increase in the surface area of the particulate films. Furthermore, saturated values of the photocatalytic activity for thick films were smaller for the films deposited with smaller particles, which is mainly attributed to the change in crystal form of the particles during the grinding treatment.

2-Propanol↗
PubMedDate not supplied

Microparticles prepared by grinding of polymeric films.

Microparticles were prepared by a film grinding method, whereby thin drug-containing ethylcellulose films were cryogenically ground into microparticles. The particle size and shape of the microparticles could be controlled by the thickness of the films and by the milling time. The encapsulation efficiency as well as the in vitro drug release depended on the physical state of the drug in the ethylcellulose matrix (dispersed vs dissolved). Increased drug loadings and decreased particle size and film thickness increased the drug release. Microparticles prepared from cast films were more dense and had a slower drug release compared to microparticles prepared from sprayed films or from films prepared from an aqueous colloidal ethylcellulose dispersion, Aquacoat ECD. Lamination of the drug-containing film with a drug-free polymer layer on both sides resulted in a reduced drug release. Hydrophilic plasticizers acted as pore-formers and accelerated drug release, while lipophilic plasticizers reduced the drug release. The solubility of the drug in the organic polymer solution was one of the main parameters to achieve high encapsulation efficiencies and extended drug release, while dispersed drug was released much faster. The drug release from microparticles prepared by film grinding was faster than from microparticles prepared by the solvent evaporation method. The faster release was attributed to the fractured surface of the ground particles. Grinding of microparticles, which were prepared by the solvent evaporation, also resulted in a faster release.

Biocompatible Materials↗
PubMed2005

The hygroscopicity of moisture barrier film coatings.

The hygroscopicity of three commercial moisture-barrier film coatings, namely, Eudragit L30 D-55 (methacrylic acid-ethyl acrylate copolymer), Opadry AMB (polyvinyl alcohol based system), and Sepifilm LP 014 (hypromellose, microcrystalline cellulose, and stearic acid based formulation), was investigated using a dynamic vapor sorption apparatus. Moisture uptake by cast films and uncoated and coated tablet cores, which were designed to be hygroscopic, low hygroscopic, and waxy, was measured following exposure to repeat relative humidity (RH) cycles of 0-50-0-50-0%, 0-75-0-75-0%, and 0-90-0-90-0% RH at 25 degrees C. Eudragit cast film exhibited the fastest equilibration but was also the least hygroscopic. Sepifilm had the fastest sorption and took up the greatest mass of water. The rate of uptake for Opadry film was similar to Sepifilm. However, this film continued to sorb moisture for a longer period. When returned to 0% RH it retained moisture in the film showing that it had a high affinity for moisture within the film. The data for the different cores indicated that there was very little benefit in using a moisture barrier film on cores with low hygroscopicity, the mass gain being a sum of that which would be expected to sorb to the film and that which sorbs to the uncoated core. There was, however, some advantage for hygroscopic cores where, even though the barrier coatings allowed substantial water sorption into the core, the extent of this was less and the rate of uptake lower than for the uncoated sample.

Adsorption↗
PubMed2001

Hot-melt coating: water sorption behavior of excipient films.

Hot-melt coating allows encapsulation of water-labile, drug-laden substrates to form a barrier that resists moisture ingress. To understand the interaction of water with excipients that can form moisture-protective coatings, sorption behavior of films of lipidic (glyceryl behenate) and polymeric (polyvinyl alcohol) coating excipients was investigated. A simple and rapid method using a new, fully automated instrumental technique to investigate the sorption/desorption behavior of excipient films is reported. Further, the influence of temperature and film thickness on the sorption behavior of films is examined. Both excipient films displayed sorption isotherms that were classified as type III and demonstrated hysteresis during desorption. The sorption data for both films did not follow the Langmuir model, and the BET model could only be used restrictively. The GAB model fitted the sorption data at all conditions and over the entire range of water activity studied. The ability of the Young and Nelson model to explain the hysteresis behavior, from analytical and mechanistic perspectives, is evaluated. Temperature and film thickness were found to profoundly influence the nature of moisture interaction and distribution of moisture in the excipient films. An Arrhenius-type relationship was observed between equilibrium moisture content of excipient films and temperature at constant water activity.

Excipients↗
PubMed2003

Buccal delivery of acyclovir from films based on chitosan and polyacrylic acid.

The aim of the present work was to investigate the possibility of achieving buccal delivery of a problematic drug, acyclovir, from films based on chitosan hydrochloride (HCS) and polyacrylic acid sodium salt (PAA). At first, the ionic interaction between HCS and PAA in distilled water was investigated by means of rheological and turbidimetric analysis. Films containing 1 mg/cm2 of acyclovir and based on pure HCS and on HCS and PAA mixed in different ratios were prepared by casting technique. The films were subjected to hydration, rheological, mucoadhesion, drug release, "wash away," and permeation/penetration measurements. A commercial cream containing acyclovir and an aqueousacyclovir suspension were used as references. The addition of PAA to HCS produced a decrease in film hydration. Films based on HCS/PAA weight ratio close to interaction productstoichiometry were characterized by higher rigidity and better "wash away" properties with respect to the other films and the reference formulation. The worst mucoadhesive properties were shown by films based on mixing ratios close to interaction product stoichiometry. The addition of PAA to HCS produced a lowering in drug release profile. All the films examined promoted the permeation of acyclovir across porcine cheek epithelium when compared with acyclovir suspension and the commercial cream. The penetration enhancement properties were affected by the mixing ratio of the two polymers. The film based on 1/1.3 HCS/PAA weight ratio, besides possessing the best resilience properties on the mucosa, was also characterized by the highest permeation profile and, therefore, represents a promising formulation for buccal delivery of acyclovir.

Absorption↗
PubMed1972

The orientation of rhodopsin and other pigments in dry films.

When rhodopsin in a gelatin film is dried, the rhodopsin chromophores orient primarily in the plane of the film. When the film is wetted, the chromophores disorient. These changes are reversible. When rhodopsin in a wet film. is bleached in the presence of hydroxylamine and redried, the retinal oxime which results is oriented more perpendicularly to the plane of the film. These orientations in dry gelatin films resemble those in the disc membranes of rod outer segments. A variety of other proteins are similarly oriented in dry gelatin films: methemoglobin, cytochrome c, phycocyanin. Films of methemoglobin and cytochrome c display prominently the high Soret band near 410 nm when measured with unpolarized light passing through the face of the fim, but display no Soret band at all with light passing through the edge of the film. All of these orientations imply a large asymmetry of the protein micelles, perhaps conferred upon them by linear polymerization in the course of drying. Such asymmetry can be demonstrated directly with rhodopsin. A wet paste of rhodopsin-digitonin micelles, sheared between glass slides, becomes highly oriented, the rhodopsin chromophores lining up in the direction of shear, the retinal oxime produced by bleaching orienting more perpendicularly to the shear.

Acetates↗
PubMed1991

Effect of hydrogel lens wear on tear film stability.

Noninvasive break-up time (NIBUT) of the tears was measured in a controlled, randomized, double-masked study to assess: (1) the stability of the prelens tear film during wear of new high and low water content lenses and (2) the stability of the precorneal tear film following lens removal after 1 h of wear. The prelens tear film NIBUT of 6 subjects was found to be relatively constant over a 1-h wearing period, averaging 6.1 +/- 1.1 s (mean +/- SEM). These values were significantly (Scheffe's S test, p less than 0.05) lower than those recorded for the precorneal tear film before lens insertion (33.5 +/- 10.6; mean +/- SEM), although 85% of prelens tear film NIBUT's were greater than the 3-s average interblink period reported previously for soft lens wearers. After lens removal, precorneal tear film NIBUT was reduced significantly compared to prewear levels (Scheffe's S test, p less than 0.05) for up to 15 min. Application of the monomolecular growth model to the NIBUT recovery data revealed a half-time for recovery of 6.0 min, with recovery 95% complete 25.8 min after lens removal. Lens type was not a significant factor in tear film stability, either during wear or after lens removal. The basis for reduced precorneal tear film NIBUT after lens removal is unknown; however, a disruption of the mucin layer coating the corneal epithelium is the most likely mechanism. Indeed, the technique of measuring precorneal tear film NIBUT after lens removal may be a useful determinant of the extent to which contact lens wear disrupts the precorneal mucin layer, providing an indication of the susceptibility of the cornea to a variety of complications.

Blinking↗
PubMed2005

Surface pressure measurements of human tears and individual tear film components indicate that proteins are major contributors to the surface pressure.

PURPOSE: Tear film stability has been associated with a low surface tension (high surface pressure), which has been attributed to a variety of tear film components. In this study, we examined the contribution of various tear proteins, mucin, and meibomian lipids to the surface pressure of human tears. METHODS: A Langmuir trough was used to measure and compare the surface activities of albumin, lipocalin, beta-lactoglobulin, lactoferrin, lysozyme, secretory IgA, mucin, meibomian lipid, and tears. RESULTS: All proteins exhibited surface activity. The surface pressure-area (Pi-A) profiles of most protein films at equilibrium surface pressure (Pieq) were sigmoidal and showed hysteresis between the expansion and compression phases of the cycle. Pieq of most proteins took 4-9 hours to occur. By contrast, the Pi-A profiles for meibomian lipid films were hyperbolic rather than sigmoidal and had little hysteresis, and Pieq was attained within 1 hour. The Pi-A profiles of mucin films showed mostly hyperbolic characteristics with small hysteresis. The Pi-A profiles of films of tears were sigmoidal, showed strong hysteresis, and reached Pieq at about 5 hours. Partitioning of the proteins and whole tears into the subphase also occurred. CONCLUSION: Comparison between the dynamic Pi-A profiles of tears and those of individual tear film components shows that tear film proteins not only are capable of surface activity but also are major contributors to the surface activity of the tear film.

Albumins↗
PubMed2002

Swelling-induced morphology in ultrathin supported films of poly(d,l-lactide).

In this study we describe a surface morphology that arises when ultrathin supported films of poly(d,l-lactide) are immersed in water. The films are initially flat with a rms roughness of approximately 2 nm. After immersion the surfaces of the films are covered with craters. The craters have a narrow distribution of sizes and are typically micrometers in diameter. They have depths in the 10-100 nm range. In situ atomic force microscopy shows that the craters occur as a result of a blistering process, which occurs when the films delaminate from the silicon substrate. The films buckle away from the substrate to give a nonzero initial diameter and then the blisters proceed to grow until they reach a maximum size. At any point during the growth process, the blisters can be made to collapse by removing the films from water. This phenomenon is explained in terms of a laterally confined swelling film, which has a buckling instability and releases excess strain energy by wrinkling. An expression for the initial buckling wavelength is extracted using the expressions for a buckling plate. Information about the mechanical properties of the films and the surface interaction between the film and substrate can also be obtained by considering the kinetics of blister growth.

Journal Article↗
PubMed1998

Characterization of thin polymer films by X-ray reflectometry with synchrotron radiation.

X-ray reflectivity (XR) measurements with a synchrotron radiation source were carried out for thin polymer films on a glass plate. From the XR data, the film thickness and surface and interface roughnesses could be determined. In addition, the appropriate conditions and precision for measurements were also discussed. Kiessig fringes were observed clearly for specular XR measurements of poly(methylmethacrylate) thin film. Analysis of the XR data allowed the determination of the film thickness very precisely. By a curve-fitting procedure of the XR profile, the film-surface roughness and film-substrate interface roughnesses were determined. A Fourier transform of the XR data was performed as an alternative method of evaluating the film thickness. The values for the film thickness obtained by the curve-fitting procedure and Fourier-transform procedure were slightly different from each other. One possibility for the cause of this difference may be an integral error and/or cut-off effect in the Fourier-transform procedure. The XR technique with synchrotron radiation is a very powerful tool for structural characterization of thin polymer films.

Journal Article↗