SEARCH · Search PubMed

Results for “Enzyme Stability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

PubMed2001

Determination of inhibitors' potency (IC50) by a direct high-performance liquid chromatographic method on an immobilised acetylcholinesterase column.

An immobilised acetylcholinesterase (AChE) stationary phase was prepared by using an in situ AChE immobilisation procedure. A stainless steel column packed with epoxide silica was connected to the HPLC system and the enzyme solution at pH 5.8 was recycled through the column at a flow-rate of 0.5 ml/min for 24 h. The activity of the immobilised AChE was determined by injecting the substrate acetylthiocholine, using as mobile phase 0.1 M phosphate buffer (pH 7.4) containing Ellman's reagent [5,5'-dithio-bis(2-nitrobenzoic acid)] and measuring the area of the obtained peak with UV detection at 412 nm. The effect of AChE inhibitors tacrine, edrophonium and donepezil were evaluated by the simultaneous injection of each inhibitor with the substrate. The resulting decrease in the AChE activity, as expressed by the decrease of the peak area detected at 412 nm, was related to the concentration and potency of the solutes. The obtained IC50 values were compared with those derived by the conventional spectrophotometric method. This immobilized enzyme reactor, included in a chromatographic system, can be used for the rapid screening for new inhibitors allowing for the on-line determination of a compound's inhibitory potency. The advantages over the conventional methods are the increased enzyme stability and system automation which allows a large number of compounds to be analysed continuously.

Acetylcholinesterase↗

PubMed2000

Fabrication of oral acid resistant Fermosorb (Ferment + sorbent)-type preparations can be simplified using industrial Bacillus subtilis culture filtrates as an enzyme source.

In our recent article [Biziulevicius, G.A. and Zukaite, V., 1999. Int. J. Pharm. 189, 43-55] we described a novel approach in design of oral preparations intented for intestinal delivery of enzymes, based on reversible immobilization of the latter onto the polymer matrix. Fermosorb (ferment + sorbent)-type preparations, produced in such a way, are characterized as two-component delayed-release enzyme formulations being stable at acidic pH and thus ensuring the protection of an active substance in the environment of the gastric region and liberating the active substance through dissociation of the enzyme-polymer complex at neutral pH values characteristic for the intestines. In the present paper we report our updated findings showing that the technology of fabrication of two Fermosorb-type preparations manufactured (namely Fermosorb and Polyferm) can be simplified (as well as their production cost reduced) substituting the acetone precipitated enzyme preparation solutions, currently used as an enzyme source, by their precursors--industrial Bacillus subtilis culture filtrates. Moreover, we give a description of how one more Fermosorb-type preparation aimed at intestinal delivery of amylolytic enzymes can be produced in a similar manner. Determination of immobilization conditions has revealed, that irrespectively of the enzyme origin (lytic, proteolytic or amylolytic) and its source (1%, acetone precipitated preparation solution or culture filtrate), optimal for immobilization v/w ratio of the liquid phase and the polymer matrix (Biocarb L) remains the same and is equal to 10:1 (approximate). The main differences have been found to be in optimal for immobilization pH values as well as process duration in regard to the two enzyme sources applied. In case of proteolytic and amylolytic enzymes only one of the variables was different (process duration for the first ones, optimal pH for the second ones), while in case of lytic enzymes both variables were different. The percentage of the enzymes activity uptaken from the reaction mixture formed by either of the enzyme sources and the polymer matrix (approximately 60%) as well as activity losses at drying the enzyme-polymer complexes ( approximately 20%), tolling in the final activity yield of near 40%, were found to be very similar.

Administration, Oral↗

PubMed2002

Long term stability of rh-Cu/Zn-superoxide dismutase (SOD)-liposomes prepared by the cross-flow injection technique following International Conference on Harmonisation (ICH)-guidelines.

The current market position of liposomes as drug carriers is still being discussed with regard to large scale production, product characterisation and the stability of the dispersions. In this study, long term stability of liposomal suspensions with encapsulated rh-Cu/Zn-superoxide dismutase was tested according to the International Conference on Harmonisation (ICH) recommendations. The guidelines of the ICH provide general requirements for stability testing for registration and export in particular. The Institute of Applied Microbiology has examined a process to produce large amounts of pharmaceutical-grade liposomes for the treatment of inflammatory diseases by topical application. For the evaluation of its long-term storage stability, liposomal stability and protein stability were tested under appropriate conditions. Therefore, size alterations of the vesicles, protein release and protein activity were evaluated. During the observation period, neither significant alterations of the liposomes nor any protein degradation could be detected. In the light of these findings our liposomal formulations seem to provide chemical, physical and biological stability according to the definitions of the ICH. Appropriate lipid compounds and environmental factors, in combination with an optimised process and adequate storage conditions, facilitate the production of liposome dispersions suitable as drug carriers on the market.

Drug Stability↗

PubMed2002

A new amperometric enzyme electrode for alcohol determination.

A new enzyme electrode for the determination of alcohols was developed by immobilizing alcohol oxidase in polvinylferrocenium matrix coated on a Pt electrode surface. The amperometric response due to the electrooxidation of enzymatically generated H(2)O(2) was measured at a constant potential of +0.70 V versus SCE. The effects of substrate, buffer and enzyme concentrations, pH and temperature on the response of the electrode were investigated. The optimum pH was found to be pH 8.0 at 30 degrees C. The steady-state current of this enzyme electrode was reproducible within +/-5.0% of the relative error. The sensitivity of the enzyme electrode decreased in the following order: methanol>ethanol>n-butanol>benzyl alcohol. The linear response was observed up to 3.7 mM for methanol, 3.0 mM for ethanol, 6.2 mM for n-butanol, and 5.2 mM for benzyl alcohol. The apparent Michaelis-Menten constant (K(Mapp)) value and the activation energy, E(a), of this immobilized enzyme system were found to be 5.78 mM and 38.07 kJ/mol for methanol, respectively.

Alcohol Oxidoreductases↗

PubMed2002

Amperometric enzyme electrode for organic peroxides determination prepared from horseradish peroxidase immobilized in poly(vinylferrocenium) film.

Organic peroxides, t-butyl hydroperoxide, 2-butanone peroxide, cumene hydroperoxide and t-butyl peracetate, were determined by an amperometric enzyme electrode. The enzyme electrode was prepared through electrostatic immobilization of horseradish peroxidase (HRP) in a polyvinylferrocenium (PVF) film. A PVF(+)ClO(4)(-) film was coated on a Pt foil at +0.70 V by electrooxidation of polyvinylferrocene in methylene chloride with 0.1 M tetrabutylammonium perchlorate (TBAP). The enzyme modified electrode PVF(+)HRP(-) was prepared by anion-exchange in a solution of HRP(-) in 0.05 M phosphate buffer at pH 8.5. FTIR spectroscopy was used to identify PVF, PVF(+)ClO(4)(-), and PVF(+)HRP(-). The immobilized amount of the enzyme in the film was determined by UV spectroscopy. The effects of the polymeric film thickness, bulk enzyme concentration used in the immobilization treatment and the temperature on the performance of enzyme electrode were investigated. The inhibitory effect of oxygen was also examined. Linearities, lower detection limits, active life times and sensitivities of the electrode were determined for each peroxide.

Benzene Derivatives↗

PubMed2002

A hydrogen biosensor made of clay, poly(butylviologen), and hydrogenase sandwiched on a glass carbon electrode.

A hydrogen gas (H(2)) biosensor was developed in which hydrogenase (H(2)ase) was immobilized and sandwiched between two layers of a montmorillonite clay and poly(butylviologen) (PBV) mixture on a glass carbon electrode. The immobilized PBV efficiently enhanced the electron transfer among the electrode, H(2)ase, and methyl viologen in solution. Both PBV and methyl viologen acted as the electron carrier in the clay-PBV-H(2)ase modified electrode. The clay-PBV-H(2)ase electrode catalyzed the oxidation of H(2) to protons (H(+)) with the electrons being transferred by viologen groups to the electrode. The activation energy of this process was 38+/-2 kJ/mol at pH 7. The catalytic current of the clay-PBV-H(2)ase electrode increased linearly when exposed to increasing concentrations of H(2) gas. In contrast, this electrode showed no activity when exposed to three combustible compounds, namely, carbon monoxide, methane and methanol. The optimum pH range for the oxidation of H(2) by the clay-PBV-H(2)ase electrode was from 7 to 10. Electron transfer process in the clay-PBV-H(2)ase electrode is discussed.

Aluminum Silicates↗

PubMed2002

Hydrogen peroxide sensitive amperometric biosensor based on horseradish peroxidase entrapped in a polypyrrole electrode.

The enzyme horseradish peroxidase (HRP) has been entrapped in situ by electropolymerization of pyrrole onto a platinum electrode. The latter was previously coated by a polypyrrole layer for better adhesion of the biocatalyst film and in order to avoid the enzyme folding onto the Pt electrode. The biosensor allowed the determination of hydrogen peroxide in the concentration range comprised between 4.9 x 10(-7) and 6.3 x 10(-4) M. The biosensor retained more than 90% of its original activity after 35 days of use.

Biosensing Techniques↗

PubMed2003

Surface functionalization of polypyrrole film with glucose oxidase and viologen.

A surface modification technique was developed for the functionalization of polypyrrole (PPY) film with glucose oxidase (GOD) and viologen moieties. The PPY film was first graft copolymerized with acrylic acid (AAc) and GOD was then covalently immobilized through the amide linkage formation between the amino groups of the GOD and the carboxyl groups of the grafted AAc polymer chains in the presence of a water-soluble carbodiimide. Viologen moieties could also be attached to the PPY film via graft-copolymerization of vinyl benzyl chloride with the PPY film surface followed by reaction with 4,4'-bipyridine and alpha,alpha'-dichloro-p-xylene. X-ray photoelectron spectroscopy (XPS) was used to characterize the PPY films after each surface modification step. Increasing the AAc graft concentration would allow a greater amount of GOD to be immobilized but this would decrease the electrical conductivity of the PPY film. The activity of the immobilized GOD was compared with that of free GOD and the kinetic effects were also studied. The immobilized GOD was found to be less sensitive to temperature deactivation as compared to the free GOD. The results showed that the covalent immobilization technique offers advantages over the technique involving the entrapment of GOD in PPY films during electropolymerization. The presence of viologen in the vicinity of the immobilized GOD also enabled the GOD-catalyzed oxidation of glucose to proceed under UV irradiation in the absence of O(2).

Acrylates↗

PubMed2003

Optical biosensor consisting of glutathione-S-transferase for detection of captan.

The optical biosensor consisting of a glutathione-S-transferase (GST)-immobilized gel film was developed to detect captan in contaminated water. The sensing scheme was based on the decrease of yellow product, s-(2,4-dinitrobenzene) glutathione, produced from substrates, 1-chloro-2,4-dinitrobenzene (CDNB) and glutathione (GSH), due to the inhibition of GST reaction by captan. Absorbance of the product as the output of enzyme reaction was detected and the light was guided through the optical fibers. The enzyme reactor of the sensor system was fabricated by the gel entrapment technique for the immobilized GST film. The immobilized GST had the maximum activity at pH 6.5. The optimal concentrations of substrates were determined with 1 mM for both of CDNB and GSH. The optimum concentration of enzyme was also determined with 100 microg/ml. The activity of immobilized enzyme was fairly sustained during 30 days. The proposed biosensor could successfully detect the captan up to 2 ppm and the response time to steady signal was about 15 min.

Biosensing Techniques↗

PubMed2004

Amperometric determination of laminarin using immobilized beta-1,3-glucanase.

A novel sensor system equipped with a reactor packed with beads containing immobilized beta-1,3-glucanase and glucose oxidase was developed for the amperometric determination of laminarin concentration. The proposed sensor system consisted of a reactor, an oxygen electrode, a flow cell, a pump, a buffer tank, and a recorder. The measurement was performed with a flow injection system. The optimum conditions for the sensor system were as follows: transfer solution, pH 7.0; 0.1 M phosphate buffer solution; flow rate, 0.15 ml/min; and sample volume, 50 microl. The response was correlated to the laminarin concentration. The calibration curve was obtained between 50 and 0.5 mg/ml laminarin (R2 = 0.994). The detection limit was 50 microg/ml laminarin (the ratio of signal/noise = 3). The relative standard deviations were 2.0% (n = 15) and 2.5% (n = 15) for 0.4 and 1.0 mg/ml laminarin solutions, respectively. One assay was completed within 5 min. Results suggest that the sensor can be used not only for the analysis of seaweed and health-enhancing foods but also for monitoring the initial pollution of the marine environment.

Biosensing Techniques↗

PubMed1999

Sensitive amperometric biosensor for the determination of biogenic and synthetic amines using pea seedlings amine oxidase: a novel approach for enzyme immobilisation.

We prepared a new inorganic sorbent based on modified triazine (2-[4,6-bis (aminoethylamine)-1,3,5-triazine]-Silasorb; BAT-Silasorb) which binds pea seedlings amine oxidase (PSAO) very tightly without loss of its catalytic activity. This unique feature as well as the wide substrate specificity of PSAO was successfully utilised in the construction of an amperometric biosensor based on a carbon paste electrode for the fast and sensitive detection of various amines at a formal potential 0 mV versus Ag/AgCl reference electrode. The reaction layer of the biosensor is created by the direct immobilisation of PSAO at the electrode surface via affinity carrier BAT-Silasorb. Used arrangement facilitates a simple restoration of the inactive biosensor. An amperometric signal results from horseradish peroxidase catalysed reduction of H2O2, a secondary product of the oxidative deamination of amines, catalysed by PSAO. The sensor was used for the basic characterisation of 55 biogenic and synthetic amines, from numerous mono-, di- and polyamines to various hydroxy-, thio-, benzyl- and aromatic derivatives in order to establish its suitability as a postcolumn detector. Its high sensitivity to putrescine 20.0 +/- 0.64 mA l-1 per mol (636.9 +/- 2.03 mA l-1 per mol per cm2), a limit of detection of 10 nmol l-1 (determined with respect to a signal-to-noise ratio 3:1), a linear range of current response to 0.01-100 mumol l-1 concentration of substrate and good reproducibility all indicate that the sensor could be applied to future industrial and clinical analyses.

Amine Oxidase (Copper-Containing)↗

PubMed2000

Designed evolution of enzymatic properties.

By providing a simple and reliable route to enzyme improvement, directed evolution has emerged as a key technology for enzyme engineering and biocatalysis. Recent advances include the evolution of a novel catalytic activity using the alpha/beta barrel scaffold, evolution of a cofactor-free monooxygenase, and the engineering of regulatable enzymes. New screening systems for enantioselectivity and protein solubility, and the continuing stream of new methods for creating enzyme libraries further extend evolution's reach.

Biotechnology↗

PubMed2002

Directed evolution of enzymes and pathways for industrial biocatalysis.

Directed evolution has become a powerful tool for developing enzyme and whole cell based biocatalysts. Significant recent advances include the creation of novel enzyme functions and the development of several new efficient directed evolution methods. The combination of directed evolution and rational design promises to accelerate the development of biocatalysts for applications in the pharmaceutical, chemical and food industries.

Catalysis↗

PubMed2002

Enzyme technology and bioprocess engineering.

The impact of directed evolution and site-specific mutagenesis on the industrial utility of enzymatic catalysis through the modification of enzyme structure and function is clearly an important area of research in bioprocess engineering. High-throughput screening for novel or improved enzyme activities, both by more efficiently exploring nature's diversity and by creating new diversity in the test tube, allows new bioprocesses to be developed. Similarly, innovations in enzyme technology that address novel ways to apply enzymes in bioprocesses also have an impact on bioprocess engineering. Several recent developments have been made in this latter aspect of bioprocess engineering.

Biotechnology↗

PubMed2003

Immobilised enzymes: carrier-bound or carrier-free?

Recent advances have been made in the development of carrier-free immobilised enzymes and several criteria established for the selection of immobilised enzymes for biotransformations. The pros and cons of carrier-free versus carrier-bound immobilised enzymes and of each type of carrier-free enzyme are discussed.

Catalysis↗

PubMed2001

Site-directed mutagenesis studies of rat steroid 5alpha-reductase (isozyme-1): mutation of residues in the cofactor binding and C-terminal regions.

We have investigated the roles of highly conserved glycine (G175, G185), negatively charged (E188, D165) and histidine residues (H233, H237) in rat steroid 5alpha-reductase (isozyme-1), on NADPH, testosterone (T) binding and enzyme activity. The mutations G175R and G175S result in a two- to threefold increase in K(m)(NADPH) and an approximately fourfold decrease in the V(max) with no change in K(m)(T). The mutation G185W resulted in a fivefold decrease in K(m)(NADPH) and an eightfold decrease in V(max), with no change in K(m)(T), whereas the mutations E188Q and D165N both resulted in inactive enzyme. Steady-state kinetic measurements showed that the mutation H233R resulted in an approximately 40-fold decrease in V(max), an approximately 20-fold increase in K(m)(T) and no alteration in K(m)(NADPH), whereas the mutation H237R resulted in virtually inactive enzyme. The results suggest that the conserved glycines are not essential for cofactor binding and activity, and that the negatively charged residues may contribute to enzyme stability, whereas the C-terminal histidines appear to be involved in substrate binding and catalytic activity.

3-Oxo-5-alpha-Steroid 4-Dehydrogenase↗

PubMed2003

Developments in industrially important thermostable enzymes: a review.

Cellular components of thermophilic organisms (enzymes, proteins and nucleic acids) are also thermostable. Apart from high temperature they are also known to withstand denaturants of extremely acidic and alkaline conditions. Thermostable enzymes are highly specific and thus have considerable potential for many industrial applications. The use of such enzymes in maximising reactions accomplished in the food and paper industry, detergents, drugs, toxic wastes removal and drilling for oil is being studied extensively. The enzymes can be produced from the thermophiles through either optimised fermentation of the microorganisms or cloning of fast-growing mesophiles by recombinant DNA technology. In this review, the source microorganisms and properties of thermostable starch hydrolysing amylases, xylanases, cellulases, chitinases, proteases, lipases and DNA polymerases are discussed. The industrial needs for such specific thermostable enzyme and improvements required to maximize their application in the future are also suggested.

Bacteria↗

PubMed2003

Chitosan from Syncephalastrum racemosum used as a film support for lipase immobilization.

Chitosan from a native Mucoralean strain, Syncephalastrum racemosum, isolated from herbivorous dung (Northeast-Brazil), was used as a film support for lipase immobilization. S. racemosum showed highest chitosan yield (152 mg g dry mycelia weight(-1); 15.2% of dry mycelia weight) among the nine strains screened, which presented 89% D-glucosamine. A chitosan film was used for lipase (EC 3.1.1.3) immobilization using glutaraldehyde as a bifunctional agent. The immobilized lipase retained 47% (12.6 micromol s(-1) m(-2)) of its initial catalytic activity after four cycles of reaction. This result is comparable (same order of magnitude) to that of the enzyme immobilized on film made from commercially available crustacean chitosan.

Animals↗