Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Dentin Permeability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources

Protective effect of the in situ pellicle on dentin erosion - an ex vivo pilot study.

AIM: The acquired pellicle is well known as an anti-erosive proteinaceous layer on enamel, but its protective properties on dentin have not been investigated in detail until now. The aim of the present ex vivo study was to evaluate the erosive effects on pellicle coated dentin. METHODS: Bovine dentin slabs were exposed to the oral cavity of one subject for 120 min for in situ pellicle formation. Subsequently, the slabs were incubated with HCl (pH 2.3) in vitro for 5 min and erosive calcium-release was measured photometrically. In addition, the acid treated specimens were evaluated by transmission electron microscopy (TEM). Pellicle free samples served as controls. RESULTS: Calcium erosion from the pellicle coated dentin slabs amounted to 23.5+/-2.9 microg Ca/min (pellicle free samples: 32.2+/-4.2 microg Ca/min). The difference was statistically significant (p < or = 0.05). In pellicle coated as well as in uncoated dentin samples, TEM-evaluation showed a demineralised dentinal surface layer which thickness ranged between 3 and 6 microm. The pellicle itself was partially dissolved but not removed by hydrochloric acid treatment. CONCLUSION: The protective properties of the acquired pellicle against an erosive challenge of the dentinal surface are limited. The dentinal pellicle functions like an ion permeable network rather than a barrier.

Adult↗

Permeability of marginal hybrid layers in composite restorations.

The goal of adhesive dentistry is to restore the peripheral seal of dentin lost from removal of enamel. Unfortunately, the hybrid layer (HL) that is used to create that seal is permeable to small ions or molecules, even in the absence of detectable, interfacial gap formation via nanoleakage. This nanoleakage results from several mechanisms including incomplete infiltration of adhesive monomers into demineralized collagen matrix, presence of hydrophilic monomers, and insufficient removal of solvent or water that remains trapped inside the HL. These mechanisms lead to a porous interface with nanometer-sized channels that increase the permeability of the HL. The null hypothesis tested in this study was that water and acidic solution storage are able to alter in vitro the resin-dentin interface, further increasing the marginal hybrid layer (MHL) permeability. Class II cavities were made in vitro. The specimens were stored in water for 1 week and in lactic acid solution for 3 days. Polyvinyl siloxane impressions of restoration margins were taken before and after storage in water and lactic acid solution. Polyether replicas were obtained using the silicon impressions as molds. Replicas and original samples were observed under scanning electron microscopy. Lines of water droplets were detected on MHLs and overlying adhesive only after storage. Replicas obtained after acidic solution storage showed great numbers of irregularities such as gaps, voids, and degradation of the dentin-restoration surface margin, but also a great number of droplets. Dentin-restoration resin interfaces absorb water and are damaged by storage in dilute lactic acid. The presence of water droplets probably indicates water that flows out of the interface during the setting time of the impression and thus represents an index of marginal HL water permeability.

Acrylic Resins↗

Phospholipids in amelogenesis and dentinogenesis.

Phospholipids have been identified in enamel and dentin. Before demineralization, a group of phospholipids extracted by lipid solvents was associated with cell membranes and is therefore closely related to cell growth and intracellular regulations. After demineralization, a second group of phospholipids, associated with the extracellular matrix, was extracted; this group is probably linked to the mineralized phase. Using imidazole-osmium tetroxide fixation of rat incisors, we stained cellular unsaturated fatty acids, so that we could visualize the membrane domains, coated pits, and endocytic inclusions. Filipin, a probe for cholesterol, varied in density along the plasma membrane of secretory ameloblasts, and allowed us to visualize membrane remnants inside the forming enamel. With respect to phospholipids located in the extracellular matrix, the malachite-green-glutaraldehyde (MGA) method or iodoplatinate (IP) reaction retains and visualizes enamel and dentin phospholipids. In predentin, aggregates appearing as granules and filaments, or liposome-like structures, were located in the spaces between collagen fibrils. In dentin, organic envelopes coating the crystals, also named "crystal-ghost" structures, outlined groups of collagen fibrils. Histochemical data provided evidence that phospholipids are co-distributed or interact with proteoglycans. Radioautography after IP reaction established that [3H] choline was detected in dentin as early as 30 min after the intravenous injection of the labeled precursor, before any labeling was seen in odontoblasts and predentin. This suggests that blood-serum-labeled phospholipids pass between odontoblasts, cross the distal permeable junctional complex, and diffuse in dentin prior to any cellular uptake and phospholipid synthesis. Pharmacologically and genetically induced pathology also supports the suggestion that phospholipids play an important role in the formation and mineralization of dental tissues.

Ameloblasts↗

A mathematical model of potassium ion diffusion in dentinal tubules.

Desensitizing agents containing potassium ions (K+) are believed to inactivate intradental nerves by raising extracellular [K+]. A mathematical model was used to investigate factors affecting [K+] in dentinal tubules. The most important factors affecting the steady-state tubular [K+] were the tubular fluid-flow velocity, salivary [K+] and the permeability to potassium (k) of the barrier between the tubule and the pulp. Tubular [K+] decreased with increasing outward flow velocity and increasing k. whereas the dimensions of the tubule and odontoblast process had little effect. Following a 1 min simulated application of 500 mmol/1 K+ to the dentine surface, [K+] at the inner end of the tubule increased above steady-state levels for 20-30 min. The maximum [K+] attained at the inner end of the tubule was around 30 mmol/l for an impermeable barrier (k = 0) and flow velocity of 1.4 microns/s, but lower maximum tubular [K+] were achieved when either the outward flow velocity or k was increased. The model suggests that applying potassium-containing preparations to dentine may increase [K+] at the inner ends of dentinal tubules to levels sufficient to inactivate intradental nerves. However, the localized increase in [K+] is transient, and the concentration change will be lessened by conditions that increase the tubular fluid-flow velocity or the permeability of the barrier between the tubule and pulp.

Dentin↗

[Histopathology of the dentomaxillary system in experimental fluorosis].

Dynamics of experimental dental fluorosis and regress of the process were studied on albino rats. Fluorine produced a selective toxic action on the tissues of the permanently growing incisors causing disturbances of the dentine- and amelogenesis, and also derangement of the pulp circulation. Changes in the bone tissue of the jaws were characterized by the progressive porosity phenomena. It appeared that regress of the process required a definite duration of the restorative period.

Amelogenesis↗

In vitro determination and quantification of 30% hydrogen peroxide penetration through dentin and cementum during bleaching.

Bleaching pulpless teeth with 30% hydrogen peroxide was reported to cause external cervical root resorption. It was hypothesized that H2O2 penetrated open dentin tubules to initiate an inflammatory response that could result in root resorption. No direct experimental evidence was provided to support this theory. An in vitro model for determination and quantification of H2O2 penetration during bleaching procedures is suggested. Artificial defects of the cementum covering the cementoenamel junction were performed in 22 extracted human premolars. After 15 minutes of thermocatalytic bleaching, H2O2 could be detected in the medium surrounding all the tested teeth. Cervical root permeability to 30% H2O2 could reach up to 82% of the total amount applied.

Dental Cementum↗

Nerve-pulp interactions.

Pulpal haemodynamics are naturally intermeshed with inflammatory responses. Cellular and humoral factors may be the vehicles that aid in physiological regulation, but when these systems are overly activated, they may lead to pathological changes. Sensory nerves may initiate inflammatory reactions when activated, and interestingly, recent findings show that vasoconstrictor nerves in the pulp can inhibit the release of neurally stored vasoactive and inflammatory mediators. Thus, there are options for endogenous control of inflammation. Perhaps a variation in the effectiveness of such control can explain why symptoms of hypersensitivity and pain are so unpredictable and individual. What naturally occurring agents are involved in early tissue changes and how do they act? Some agents exert their effects both on vessels and nerves. Thus, there is an intriguing mutual interplay between nerves and tissue reactions. A prolonged, painful stimulation may generate increased blood flow and inflammation, and vice versa, inflammation may lead to pain. This complexity of mechanisms generates many questions that need answers.

Animals↗

Prerestorative bleaching: effect on microleakage of Class V cavities.

The effect of bleaching extracted teeth on the microleakage of subsequently placed Class V composite resin restorations was evaluated. Ten extracted premolars were stored in water at 37 degrees C to serve as controls. Ten premolars were exposed to a carbamide peroxide gel for three 2-hour periods per day for 9 days. These specimens were stored in water at 37 degrees C except during treatment periods. Class V cavity preparations were then placed at the cementoenamel junction of the facial and lingual surfaces of all teeth. Half of the teeth of each group were restored with Scotchbond 2/Silux Plus and half were restored with Prisma Universal Bond 3/AP.H. After 24 hours of storage in 37 degrees C water, the teeth were thermally stressed for 100 cycles. Microleakage was assessed by dye penetration. The results demonstrated that prerestorative bleaching did not affect the marginal seal of subsequently placed restorations.

Analysis of Variance↗

The LEC (Long-Evans Cinnamon) rat as an animal model for bilirubin-induced tooth pigmentation.

The LEC (Long-Evans Cinnamon) rat is well known as a useful animal model for hepatic disease. We noticed the green pigmentation in incisors 2-3 weeks after acute hepatitis accompanied by severe jaundice. This study was undertaken to elucidate the cause of this phenomenon. Half of the pigmented teeth were examined by histopathological analysis and microradiographic analysis. Pigmentation was observed as a green stripe that ran parallel to the incremental line in the dentine. The microradiographic analysis disclosed enhanced permeability of the pigmented area as compared with other areas. The rest of pigmented teeth were dried, powdered and bilirubin was extracted with chloroform /methanol/acetic acid, 30:10:0.5; v/v under sonication. After centrifugation, the supernatant was collected and evaporated. The residue was dissolved in chloroform and its absorption spectrum measured after diazo reaction to reveal the presence of bilirubin. The spectral characteristics indicated the presence of bilirubin in the pigmented teeth. Thus, the LEC rat may be useful animal model for bilirubin-induced tooth pigmentation.

Animals↗

Critical analysis of an experimental set-up generally used for the permeability evaluation of dental lining material.

The diffusion constants of iodide through dentine membranes were determined. The DI-values were within the range generally obtained by other investigators. When the estimation of the diffusion coefficient through a well defined polycarbonate membrane was calculated the value was strongly affected by the diffusion through the unstirred diffusion layer. By using such an experimental approach it seems necessary to develop a new cell equipped with a double stirring system (one in each compartment) in order to reduce strongly the thickness of the unstirred diffusion layer.

Dental Cavity Lining↗

[Effect of phenolic resin fluid on the dentin resistance].

SEM observation was made in the experiment to analyze the ultrastructure of resinified dentin. Phenolic resin fluid permeates in to the dentinal-tubule and set in it. The permeability of this agent was also able to permeate into intercellular substance and changed the appearance of inter-weaved fibril to the condition of agent had set. According to the Fracture Mechanics, it was not beneficial to resist the fracture progress if the microspace had been fulfilled by the agent. The tensile stress of resinified dentin was 387 kg/cm2, which was 30 kg/cm2 lower than that of unresinified-dentin.

Dentin↗

The permeability of human cementum in vitro measured by electron paramagnetic resonance.

The structure and permeability of cementum are changed during the course of periodontal disease. In this study, the transport of water-soluble, spin-labelled molecules through cementum was studied by electron paramagnetic resonance (EPR). Cementum samples cut from different parts of the root were classified into four different groups: (A) samples exposed to the oral environment, (B) samples exposed to the periodontal-pocket environment; (C) samples cut from periodontally involved teeth but not exposed to saliva or periodontal pocket and (D) samples from sound young teeth extracted for orthodontic reasons. In order to obtain undamaged cementum, a dentine layer was left on each sample. Two methods were used to measure the diffusion coefficients of spin-labelled molecules in cementum dentine samples. First, the method of one-dimensional EPR imaging (EPRI) was used to evaluate the penetration of spin-labelled molecules into the cementum/dentine structure. Second, the diaphragm-cell method was used to determine the diffusion coefficients of the labelled molecules through the cementum under steady-state conditions. The results indicate that the interface between cementum and dentine is a barrier to diffusion. A set of diffusion (D) and partition (K) coefficients to describe the molecular transport in cementum, barrier and dentine was generated from the experimental data of both methods. For cementum (c), the barrier (b) and dentine (d) these coefficients were: Dc= 10(-8)cm2/s, Db= 10(-10)cm2/s, Dd= 10(-6)cm2/s and K=0.1. For the particular periodontally involved and uninvolved teeth the value of the rate-limiting barrier was DbA= 0.3 +/- 0.03 x 10(-10)cm2/s, DbB= 1 +/-0.3 x 10(-10)cm2/s, DbC= 0.3 +/- 0.03 x 10(-10)cm2/s, DbD= 0.4 +/- 0.05 x 10(-10)cm2/s. The largest diffusion flux across the dental hard tissue was found in the samples that had been exposed to the pocket environment (3.1 +/- 0.2) x 10(-9)cm2/s (p < 0.01), which coincided with the permeability calculated from the data evaluated by EPRI. The transport of the labelled molecules into and through the cementum dentine samples depends on the structure of the dental hard tissues, which changes during the course of periodontal disease. Knowledge of molecular diffusion across the tooth cementum/dentine structure is likely to be important for planning new treatments for periodontal disease.

Adolescent↗