Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Transition Temperature”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
PubMed1999

Determination of the viscosity of an amorphous drug using thermomechanical analysis (TMA).

PURPOSE: To evaluate thermomechanical analysis (TMA) as a technique for determining the viscosity of amorphous pharmaceutical materials. This property of amorphous drugs and excipients is related to their average rate of molecular mobility and thus to their physical and chemical stability. METHODS: Indomethacin was selected as a model amorphous drug whose viscosity has previously been reported in the literature. A Seiko TMA 120C thermomechanical analyzer was utilized in isothermal penetration mode to determine the viscosity of the amorphous drug over the maximum possible range of temperatures. RESULTS: Using a cylindrical penetration geometry it was possible to accurately determine the viscosity of amorphous indomethacin samples by TMA over the temperature range from 35 to 75 degrees C. The results were consistent with those reported in the literature using a controlled strain rheometer over the range 44-75 degrees C. The limiting lower experimental temperature for the TMA technique was extended to significantly below the calorimetric glass transition temperature (Tg approximately 42 degrees C), thus allowing a direct experimental determination of the viscosity at Tg to be made. CONCLUSIONS: Thermomechanical analysis can be used to accurately determine the viscosity of amorphous pharmaceutical materials at temperatures near and above their calorimetric glass transition temperatures.

Anti-Inflammatory Agents, Non-Steroidal↗
PubMed1999

Superconductivity and the c axis spectral weight of high-T(c) superconductors

The temperature dependence of the c axis spectral weight (frequency integral of the interplane conductivity) of high transition temperature (high-T(c)) superconductors is shown to be a probe of thermal and quantal fluctuations of the phase of the superconducting order parameter. The behavior of underdoped cuprates is shown to be a natural consequence of superconducting pairing without long-ranged phase coherence. Very underdoped cuprates are found to have strong phase fluctuations, even for temperatures much less than the transition temperature.

Journal Article↗
PubMed1994

Further studies on physicochemical properties of mitochondrial membranes during the formation process of megamitochondria in the rat liver by hydrazine.

Physicochemical properties of lipids extracted from hepatic mitochondria of rats fed with 1% hydrazine diet for 3 days (3H-mitochondria) and 7 days (7H-mitochondria) were studied using differential scanning calorimetry and the fluorescence polarization measurements. Results obtained from lipids extracted from 3H-mitochondria were as follows: (1) Thermotropic phase transition temperatures (Tm) were elevated with a distinct increase in transition enthalpy (delta H) compared to those of the control due to increases in relative amounts of phosphatidylethanolamine (PE) and phosphatidylserine (PS) in phospholipid species. (2) Tm in lipids and phospholipids extracted from 3H-mitochondria was elevated with decreases in delta H after the addition of Ca2+, whereas delta H of the control was increased after the addition of Ca2+. (3) Phosphatidylcholine (PC) liposomes containing PE or PS at concentrations corresponding to PE/PC or PS/PC ratio in 3H-mitochondria showed elevations of transition temperatures with decreases in delta H values after the addition of Ca2+, whereas those containing PE or PS ratio at concentrations corresponding to PE/PC or PS/PC in the control mitochondria showed increases in delta H values after the addition of Ca2+. (4) There were essentially no changes in membrane fluidity between lipids extracted from 3H-mitochondria and those extracted from the control mitochondria. Addition of Ca2+ to lipids extracted from 3H-mitochondria, however, caused elevation of membrane fluidity while those extracted from the control mitochondria showed no changes in membrane fluidity after the addition of Ca2+. (5) Increases in the ratio of unsaturated fatty acids to saturated fatty acids (U/S ratio) in phospholipids extracted from 3H-mitochondria were found to be mainly due to those in PS. These data may suggest that hydrazine modifies the membrane of mitochondria favorable for the membrane fusion via enhanced acidic phospholipid-Ca2+ interactions.

Animals↗
PubMed2005

Comparative study on the properties of acrylic bone cements prepared with either aliphatic or aromatic functionalized methacrylates.

Bone cements prepared with methacrylic acid (MAA) and diethyl amino ethyl methacrylate (DEAEM) were compared with formulations employing 4-methacryloyloxybenzoic acid (MBA) and 4-diethyaminobenzyl methacrylate (DEABM) as comonomer. The influence of these new aromatic monomers on various physicochemical, setting and mechanical properties was assessed. Surface characterization demonstrated that bone cements prepared with any of the functionalized monomers exhibited increasing hydrophilicity with monomer concentration and that the aromatic monomers provided more hydrophilic cements than their aliphatic counterparts for low concentrations of the functional monomer. It was also found that bone cements prepared with high amounts of the acidic aliphatic monomer provided the highest exotherm of reaction and their setting times were shorter than MBA based cements. On the other hand, DEABM containing bone cements exhibited shorter setting times than DEAEM formulations and slightly higher peak temperatures. In general, it was found that the glass transition temperature increased with the presence of acidic comonomer and decreased when alkaline comonomers were present, especially aliphatic ones. When aromatic methacrylates were used at 0.05 molar fraction, the highest tensile and compressive strength were achieved i.e. 46 and 118 MPa for MBA and 51 and 108 MPa for DEABM formulations. A further increase in the aromatic monomer concentration led to cements of low mechanical properties due to solubility problems as revealed by SEM.

Benzoates↗
PubMed2002

La(3+) and Gd(3+) induce shape change of giant unilamellar vesicles of phosphatidylcholine.

Lanthanides such as La(3+) and Gd(3+) are well known to have large effects on the function of membrane proteins such as mechanosensitive ionic channels and voltage-gated sodium channels, and also on the structure of phospholipid membranes. In this report, we have investigated effects of La(3+) and Gd(3+) on the shape of giant unilamellar vesicle (GUV) of dioleoylphosphatidylcholine (DOPC-GUV) and GUV of DOPC/cholesterol by the phase-contrast microscopy. The addition of 10-100 microM La(3+) (or Gd(3+)) through a 10-microm diameter micropipette near the DOPC-GUV (or DOPC/cholesterol-GUV) triggered several kinds of shape changes. We have found that a very low concentration (10 microM) of La(3+) (or Gd(3+)) induced a shape change of GUV such as the discocyte via stomatocyte to inside budded shape transformation, the two-spheres connected by a neck to prolate transformation, and the pearl on a string to cylinder (or tube) transformation. To understand the effect of these lanthanides on the shape of the GUV, we have also investigated phase transitions of 30 microM dipalmitoylphosphatidylcholine-multilamellar vesicle (DPPC-MLV) by the ultra-sensitive differential scanning calorimetry (DSC). The chain-melting phase transition temperature and the L(beta') to P(beta') phase transition temperature of DPPC-MLV increased with an increase in La(3+) concentration. This result indicates that the lateral compression pressure of the membrane increases with an increase in La(3+) concentration. Thereby, the interaction of La(3+) (or Gd(3+)) on the external monolayer membrane of the GUV induces a decrease in its area (A(ex)), whereas the area of the internal monolayer membrane (A(in)) keeps constant. Therefore, the shape changes of the GUV induced by these lanthanides can be explained reasonably by the decrease in the area difference between two monolayers (DeltaA=A(ex)-A(in)).

Calorimetry, Differential Scanning↗
PubMed2006

Surfactant-free hydrothermal synthesis of highly tetragonal barium titanate nanowires: a structural investigation.

Barium titanate nanowires synthesized with a surfactant-free hydrothermal method have been characterized by various techniques such as transmission electron microscopy (TEM), scanning electron microscopy (SEM), synchrotron X-ray diffraction, X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. The TEM and SEM analyses show the uniform cylindrical nanowires. The Rietveld refinement with synchrotron X-ray powder diffraction showed that the lattice parameters of cubic and tetragonal phases were a (= b = c) = 4.0134 A and a (= b) = 3.9998 A, c = 4.0303 A, respectively. The final weighted R-factor, R(wp), was 6.75% and the goodness of fit indicator was 1.30. The mass fraction of tetragonal and cubic phases based on the refined scale factor for the two phases were 98.4% and 1.6%, respectively, which clearly show the nanowires are tetragonal. The XPS analysis has shown that as-obtained BaTiO3 nanowires were phase pure. The Raman spectra confirm the tetragonal phase of the BaTiO3 nanowires. The dielectric constant measurement shows the shift in the transition temperature (Tc = 105 degrees C) compared to the bulk transition temperature (Tc = 132 degrees C). The dielectric constant at Tc was 174 measured at 1 kHz frequency.

Journal Article↗
PubMed2006

The influence of phenyl and phenoxy modification in the hydrophobic tails of di-n-alkyl phosphate amphiphiles on aggregate morphology.

A series of di-n-alkyl phosphate amphiphiles containing phenyl and phenoxy groups in the hydrophobic tails were synthesised, and their aggregation behaviour was investigated using fluorescence spectroscopy, differential scanning calorimetry, and cryo-electron microscopy. The aggregates displayed a wide variety of aggregate morphologies. The incorporation of a phenyl group into the end or in the middle of the alkyl chain lowered the main phase transition temperature, resulting in closed vesicles only above the phase transition temperature. Introducing a phenoxy group at the end of the alkyl chain resulted in open bilayer structures and bicelles.

Journal Article↗
PubMed1997

Effect of lipoteichoic acid on thermotropic membrane properties.

Lipoteichoic acid, diglucosyldiacylglycerol, and phosphatidylglycerol isolated from Staphylococcus aureus were embedded in dipalmitoylglycerophosphoglycerol vesicles, and their thermotropic influence on this matrix was studied by differential scanning calorimetry. The natural fatty acids of phosphatidylglycerol effected peak broadening and a decrease in molar heat capacity. These effects were more pronounced with the glycolipid, which also increased the main transition temperature. With the lipoteichoic acid mixtures, two broad main transition peaks were observed, possibly due to different levels of lipoteichoic acid in vesicles. Both peaks showed a further upshift in transition temperatures and a pronounced decrease in molar heat capacity. Since the diacylglycerol moieties of all three amphiphiles were practically identical, the differences in the thermotropic effects have to be ascribed to the different structures of the head groups. Diglucosyldiacylglycerol is proposed to exert an additional effect by hydrogen bonding the hydroxyls of the sugar rings to their phospholipid neighbors. The stronger effect of lipoteichoic acid points to dynamic interactions of the long hydrophilic chain with the vesicle surface, which stabilize the membrane structure.

Calorimetry, Differential Scanning↗
PubMed1981

Visco-elastic properties of pour (fluid) denture base resins.

A number of pour-type denture base resins were found to have low glass transition temperatures, indicating a propensity to thermal distortion. These low transition temperatures reflected high residual monomer contents. Furthermore, such materials exhibited high mechanical loss tangents, consistent with high creep rates observed previously.

Acrylic Resins↗
PubMedDate not supplied

The effect of the lipid bilayer state on fluorescence intensity of fluorescein-PE in a saturated lipid bilayer.

Fluorescein-PE is a fluorescence probe that is used as a membrane label or a sensor of surface associated processes. Fluorescein-PE fluorescence intensity depends not only on bulk pH, but also on the local electrostatic potential, which affects the local membrane interface proton concentration. The pH sensitivity and hydrophilic character of the fluorescein moiety was used to detect conformational changes at the lipid bilayer surface. When located in the dipalmitoylphosphatidylcholine (DPPC) bilayer, probe fluorescence depends on conformational changes that occur during phase transitions. Relative fluorescence intensity changes more at pretransition than at the main phase transition temperature, indicating that interface conformation affects the condition in the vicinity of the membrane. Local electrostatic potential depends on surface charge density, the local dielectric constant, salt concentration and water organisation. Initial increase in fluorescence intensity at temperatures preceding that of pretransition can be explained by the decreased value of the dielectric constant in the lipid polar headgroups region related in turn to decreased water organisation within the membrane interface. The abrupt decrease in fluorescence intensity at temperatures between 25 degrees C and 35 degrees C (DPPC pretransition) is likely to be caused by an increased value of the electrostatic potential, induced by an elevated value of the dielectric constant within the phosphate group region. Further increase in the fluorescence intensity at temperatures above that of the gel-liquid phase transition correlates with the calculated decreased surface electrostatic potential. Above the main phase transition temperature, fluorescence intensity increase at a salt concentration of 140 mM is larger than with 14 mM. This results from a sharp decline of the electrostatic potential induced by the phosphocholine dipole as a function of distance from the membrane surface.

1,2-Dipalmitoylphosphatidylcholine↗
PubMedDate not supplied

[Ion permeability of bilayer membranes formed from synthetic phospholipids in the phase transition region].

Ion permeability of black lipid membranes formed from synthetic phospholipids has been studied. The resistance of BLM formed from phosphatidylcholine, tiophosphatidylcholine, threealkylphosphate and threealkyltiophosphate was 10(7)--10(8) Ohm.cm2. It was shown that the membrane potential of the 10--30 mV arised in KCl gradient indicating the preference cation conductance in synthetic lipid membranes. A sharp decrease of the membrane conductance near to the phase transition temperature was discovered. The change of conductance by phase transition temperature was sensitive to chemical nature of the polar head of phospholipids used.

Electric Conductivity↗
PubMed1979

Differential polarized phase fluorometric investigations of diphenylhexatriene in lipid bilayers. Quantitation of hindered depolarizing rotations.

Differential polarized phase fluorometry has been used to investigate the depolarizing rotations of 1,6-diphenyl-1,3,5-hexatriene (DPH) in isotropic solvents and in lipid bilayers. For DPH dissolved in isotropic solvents, there is a precise agreement between the observed and predicted values for maximum differential tangents, indicating that in these media DPH is a free isotropic rotator. In lipid bilayers the tangent defects (i.e., the differences between the calculated and the observed maximum differential tangents) are too large to be explained by anisotropy in the depolarizing rotations but are accounted for by hindered isotropic torsional motions for the fluorophore [Weber, G (1978) Acta Phys. Pol A 54, 173]. This theory describes the depolarizing rotations of the fluorophore by its rotational rate R (in radians/second) and the limiting fluorescence anisotropy (r) at times long compared with the fluorescence lifetime. Through the combined use of both steady-state anisotropy measurements and differential phase measurements, we have demonstrated that one may obtain unique solutions for both R and r. For DPH embedded in vesicles prepared from dimyristoyl-, dipalmitoyl-, and distearoylphosphatidylcholines, the depolarizing motions are highly hindered at temperatures below the transition temperature (Tc) but are unhindered above Tc. The apparent rotational rates of the probe do not change significantly at Tc. These data suggest that the changes observed in the steady-state anisotropy near Tc derive primarily from changes in the degree to which the probe's rotations are hindered, and only to a small extent from changes in rotational rate. For DPH embedded in bilayers that contained 25 mol % cholesterol, no clear transition occurred and the rotations appeared to be hindered at all temperatures. The rotational motions of DPH embedded in dioleolyphosphatidylcholine were found to be far less hindered, but the rotational rates were similar to those obtained in the saturated phosphatidylcholines. Finally, the data show that in an anisotropic environment, such as that of a lipid bilayer, steady-state fluorescence anisotropy measurements alone cannot yield quantitatively meaningful rotational rates. Extrapolation of steady-state aniosotropy data to the quantitation of membrane viscosity is therefore difficult, if not invalid; however, qualitative comparisons can be useful.

Fluorescence Polarization↗
PubMed1976

Randomization of membrane lipids in relation to transport system assembly in Escherichia coli.

The distribution of newly synthesized lipid molecules in the pre-existing lipid phase of the membrane was studied in whole cells of the fatty acid requiring Escheria coli strain K1062. The fluorescence probe N-phenyl-1-naphthylamine revealed reversible lipid phase transitions in cells supplemented with cis-delta9-octadecenoate (transition temperature Tt = 14 degrees C; width of the transition deltaT = 13 degrees C) or trans-delta9-hexadecenoate (Tt = 27 degrees C; deltaT = 7 degrees C). Cells were first grown in the presence of cis-delta9-octadecenoate at 37 degrees C and subsequently for various periods in the presence of trans-delta9-hexadecenoate at 37 or 22 degrees C, i.e. above or below the transition of the newly formed lipids. Reproducible phase transitions with single, well-defined Tt values between 14 and 27 degrees C were observed under both conditions. Beta-Galactoside transport induced in a similar experiment before or during a change in the fatty acid composition showed a single change in activation energy at a temperature close to the lipid transition temperature, Tt. Starvation of cis-delta9-octadecenoate-supplemented cells for this fatty acid led to a gradual rise in the transition temperature, due to an increase in the percentage of saturated acyl chains in the membrane lipids. It is concluded that under all conditions investigated a mixed lipid phase composed of newly synthesized and pre-existing lipid molecules is formed in the membrane. Since conserved domains of newly synthesized lipids surrounding simultaneously formed transport proteins could not be demonstrated, the results do not support a membrane assembly mechanism proposed by N. Tsukagoshi and C. F. Fox [(1973), Biochemistry 12, 2822-2829]. It rather appears that newly formed lipid molecules are continuously released from their sites of synthesis into the lipid matrix by a rapid diffusion-controlled process.

Biological Transport↗
PubMed1985

Temperature-induced conformational transition in rabbit muscle aldolase studied by temperature dependence of sulfhydryl reactivity.

A temperature-induced non-denaturing conformational transition in rabbit muscle aldolase has been as subject of discussion and controversy for some period of time. In this study the temperature dependence of the reactivity of aldolase SH groups is investigated in order to detect subtle changes in the enzyme conformation. For model thiol-containing systems such as cysteine, glutathione and bovine serum albumin, linear Arrhenius plots have been obtained for the reaction with 5,5'-dithiobis(2-nitrobenzoic acid). On the other hand, for rabbit muscle pyruvate kinase, a protein which undergoes temperature-induced conformational transition, the plot obtained is nonlinear with a break at the temperature (18 degrees C) close to that reported earlier. In the case of aldolase the Arrhenius plots for three slowly reacting SH groups (Cys-72, 289, 338) and a fast reacting group (Cys-239) are nonlinear with a break at about 26-27 degrees C. The fluorescence measurements show that a plot of the fluorescence intensity of tryptophan residues versus temperature exhibits a break at the same temperature. It is shown that the observed conformational change is fully reversible. In the presence of the competitive inhibitor hexitol 1,6-bisphosphate, which is known to protect Cys-72 and Cys-338 from chemical modification, the Arrhenius plot exhibits a break for the fast reacting Cys-239 residue and is linear for the slowly reacting Cys-289. It is found that 0.6 M urea increases the transition temperature for all exposed SH groups of aldolase. The above results show that at several points in the aldolase molecule, including the active-site region, an abrupt change of microenvironments takes place with temperature. The competitive inhibitor protects a portion of aldolase molecule against the thermal transition.

Animals↗
PubMed2005

Evidence of microphase separation in controlled pore glasses.

The phase separation of a mixture of water and isobutyric acid (iBA) confined in the pore space of Controlled Pore Glass (CPG) 10-75 has been studied by 1H NMR relaxometry and 1H-pulsed field gradient (PFG) diffusion measurements. For an acid-rich mixture (mass fraction 54 wt% iBA), evidence of a phase separation process in the pores was obtained, which occurs in a temperature window between 32 and 39 degrees C, as indicated in the PFG data by an anomalous temperature dependence of the diffusion coefficient and in the relaxation data by a bi-exponential magnetization decay. The phase separation temperature of the mixture in the pore is slightly lower than in the bulk mixture of the same composition (41 degrees C) and extends over a finite temperature range. A qualitative model of the phase separation process in the pores is developed, which assumes a temperature-dependent domain-like structure of the liquid below the phase transition temperature and a breakdown of these domains upon reaching the transition temperature.

Journal Article↗
PubMedDate not supplied

[Nonsymmetrical polymethine dyes as fluorescent probes for the study of microviscosity of membrane phospholipid bilayers].

Nonsymmetrical polymethine dyes are shown to be applied as a new approach in the studies of phospholipid membrane microviscosity. The method requires determination of the intensity ratio for the long-wave length (Ig) and short-wave length (Ik) bands of fluorescence spectra in the region of 730-770 nm at exitation 600 nm. It allows determination of microviscosity by comparative measurements of the fluorescence parameter Ig/Ik in the model medium of the known viscosity (glycerol) and the object under study. Microviscosity in egg phosphatidylcholine vesicules (liposomes) is found to be 0.6-1.2 P. It depends on the surface curvature (size of vesicle), cholesterol content and temperature. It the studies of dimiristoylphosphatidyl choline liposomes the changes in microviscosity at the phase transition temperature are shown to be from 4.5 to 1.1 P. The transition temperature is 24.5 degrees C, the transition range being 2.2 degrees C. The results of this work demonstrate the advantages of the suggested approach to study mobility in phospholipid membranes and confirm it to be promising to study natural membranes and whole cells.

Fluorescent Dyes↗
PubMed1992

Hexagonal phase forming propensity detected in phospholipid bilayers with fluorescent probes.

The fluorescence emission spectrum of N epsilon-dansyl-L-Lys undergoes a marked blue shift when incorporated from aqueous solution into phospholipid bilayers. This shift is greater for membranes composed of dipalmitoleoylphosphatidylcholine than for membranes of dipalmitoleoylphosphatidylethanolamine. With the latter but not the former lipid, the fluorescence emission from N epsilon-dansyl-L-Lys is markedly temperature-dependent. The marked temperature dependence of N epsilon-dansyl-L-Lys fluorescence in bilayers of dipalmitoleoylphosphatidylethanolamine is greatest as the sample is heated close to the bilayer to hexagonal phase transition temperature. The fluorescence emission properties of another probe of membrane surface hydrophobicity, Laurdan, also exhibit marked changes at temperatures just below the bilayer to hexagonal phase transition temperature. At these temperatures, the generalized polarization begins to increase rather than decrease with temperature, and the emission intensity decreases markedly. Such effects are not observed over the same temperature range with phosphatidylcholine. Thus, both dansyl-L-lysine and Laurdan provide probes to measure changes in the physical properties of membrane bilayers which occur when these bilayers are heated close to the temperature required for transition to the hexagonal phase.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed1983

Cooperative effects in the interaction between melittin and phosphatidylcholine model membranes. Studies by temperature scanning densitometry.

The interaction between the peptide melittin from bee venom with multilamellar liposomes of dipalmitoylphosphatidylcholine or egg yolk phosphatidylcholine has been studied by the method of temperature scanning densitometry, yielding information on the specific volume of the association products and on the changes during the thermotropic transition of the lipids. The effects of the interaction were found to be biphasic with respect to melittin concentration; below 10(-3) mol per mol of phospholipid, an increase in transition temperature, abolition of the pretransition, a reduction in the transition volume of the lipids by about 25%, and a nonadditive increase in apparent specific volume of the complexes were observed. Only minor changes in these parameters could be detected between molar ratios of 10(-3) and 10(-2). Above 1 mol % melittin, the transition temperature decreased and the transition volume approached zero around 10 mol %. Since the effects in the low concentration range cannot be accounted for only by local perturbations around the actual sites of interaction, it is concluded that the interaction involves long range effects of melittin affecting several hundreds of phospholipid molecules. The results are discussed in terms of a phospholipid cluster model, whereby the interaction with melittin leads to a cooperative transition of entire clusters to a state of expanded volume. It is suggested that this transition may be important to the activating effect of melittin on membrane enzymes and to enhanced membrane permeability and lysis.

Bee Venoms↗