Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GLASSES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
PubMed2000

Adherence of Streptococcus mutans to an E-glass fiber-reinforced composite and conventional restorative materials used in prosthetic dentistry.

The adherence of Streptococcus mutans to E-glass used in fiber-reinforced composites, denture base polymer, and four other restoratives was investigated. The materials were studied with and without a parotid saliva and serum pellicle. Specimens of the studied materials (E-glass, denture base polymer, titanium, cobalt-chromium alloy, gold alloy, and grained feldspar ceramic) were incubated in a suspension of S. mutans, allowing initial adhesion to occur. The degree of bacterial adhesion was studied using scanning electron microscopy (SEM). The studied uncoated materials showed rather similar adhesion of S. mutans. Saliva coating resulted in a decrease of adherence to all materials except glass. With a saliva pellicle E-glass showed the strongest ability to bind S. mutans, and it differed significantly from the other studied materials. Serum coating markedly decreased adhesion to all materials, and only minor differences among the studied materials were observed. The results of this study suggest that the studied restoratives are rather similar with respect to S. mutans adhesion and that a saliva pellicle may promote adhesion of S. mutans to glass fibers.

Bacterial Adhesion↗
PubMed2000

Initial events at the bioactive glass surface in contact with protein-containing solutions.

Upon implantation, bioactive glass undergoes a series of reactions that leads to the formation of a calcium phosphate-rich layer. Most in vitro studies of the changes that occur on the surface of bioactive glass have employed the use of buffer solutions with compositions reflecting the ionic composition of interstitial fluid. Although these studies have documented the physical and chemical changes associated with bioactive glass immersed in aqueous media, they do not reveal the effect of serum proteins and cells that are present at the implantation site. In the present study, we document, using atomic force microscopy (AFM) and Rutherford backscattering spectrometry (RBS), significant differences in the reaction layer composition, thickness, morphology, and kinetics of formation arising from the presence of serum proteins. The data reveal that the uniform and rapid adsorption of serum proteins on the surface may serve to protect the surface from further direct interaction with the aqueous media, slowing down the transformation reactions. This finding is in agreement with previous studies that have shown that the presence of serum proteins significantly delays the formation of hydroxyapatite at the surface of bioactive glass. These data also support the hypothesis that initial reaction layers in vivo interact with cells in order to produce the tissue-bioactive glass interface typically observed on ex vivo specimens.

Alpha Particles↗
PubMed2001

Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane-glass hybrid microchip.

We report on the development of a hybrid polydimethylsiloxane (PDMS)-glass microchip for genetic analysis by functional integration of polymerase chain reaction (PCR) and capillary gel electrophoresis (CGE), and on related temperature control systems for PCR on a PDMS-glass hybrid microchip. The microchip was produced by molding PDMS against a microfabricated master with comparatively simple and inexpensive methods. PCR was successfully carried out on the PDMS-glass hybrid microchip with 500 bp target of lambdaDNA and the amplified gene was subsequently analyzed by CGE on the same PDMS-glass microchip. The chip could be considered as an inexpensive single-use apparatus compared to glass or silicon-made microchips for the same purpose.

Bacteriophage lambda↗
PubMed2001

Towards dynamic coating of glass microchip chambers for amplifying DNA via the polymerase chain reaction.

As microchip technology evolves to allow for the integration of more complex processes, particularly the polymerase chain reaction (PCR), it will become necessary to define simple approaches for minimizing the effects of surfaces on the chemistry/processes to be performed. We have explored alternatives to silanization of the glass surface with the use of additives that either dynamically coat or adsorb to the glass surface. Polyethylene glycol, polyvinylpyrrolidone (PVP), and hydroxyethylcellulose (HEC) have been explored as potential dynamic coatings and epoxy (poly)dimethylacrylamide (EPDMA) evaluated as an adsorbed coating. By carrying out analysis of the PCR products generated under different conditions via microchip electrophoresis, we demonstrate that these coating agents adequately passivate the glass surface in a manner that prevents interference with the subsequent PCR process. While several of the agents tested allowed for PCR amplification of DNA in glass, the EPDMA was clearly superior with respect to ease of preparation. However, more efficient PCR (larger mass of amplified product) could be obtained by silanizing the glass surface.

Acrylic Resins↗
PubMedDate not supplied

Formaldehyde activity on historical glass objects in museum microclimate.

Degradation of some cultural heritage monuments has been caused by interaction with the closest environment (micro-climate). Amount of separate compounds is very small and because of it, this fact becomes neglected. Time and temperature can induce their activity finally causing deterioration. In this category organic compounds can be interpreted as one of museum show - case element. This statement has been improved by testing glass objects and their suitable sensors (model glasses). Destructive activity of formaldehyde on historical glasses belonging to the XVIII-th c. objects with totally different compositions has been confirmed by carried out experiments. For historical material which is very limited, sensor glass method has been applied. Sensors are prepared on the base of results of chemical analyses of original glass chemical analyses and melted on laboratory scale (according to historical data). Induced corrosion for sensor supports knowledge about deterioration process in real micro-environmental conditions. The following testing methods were used: scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), optical interferometer (OI), inductively couple plasma (ICP).

Formaldehyde↗
PubMed1985

Glass fiber dermatitis.

Many workers exposed to glass fibers experience an intense pruritus (itching), sometimes accompanied by erythema, erosions, and dermatitis. Patch tests to glass fibers provoked a papulovesicular dermatitis in about 25% of normal persons. Workers in the glass wool industry, whether or not clinically symptomatic, had the same levels of patch-test reactivity. A battery of skin tests failed to identify persons with an increased susceptibility to glass fiber pruritus. Some workers' skin becomes hardened by continuous exposure. This hardening is lost after a one-month holiday but is quickly regained. Barrier creams had no protective value in preventing glass fiber dermatitis.

Age Factors↗
PubMed1991

A cross-sectional study of pulmonary function among workers exposed to multimetals in the glass bangle industry.

Spirometric lung functions were evaluated in 220 asymptomatic glass bangle workers exposed to the salts of various heavy metals, such as arsenic, lead, zinc, copper, manganese, cobalt, cadmium, and selenium, which are used as coloring agents in the manufacture of glass bangles. The mean values of various spirometric variables (viz. FVC, FEV1, IMBC, and PEFR) were within normal range (more than 80% of the predicted values) in both smoking and nonsmoking glass bangle workers and did not reveal any significant differences in comparison with those observed in the unexposed controls. However, variables such as FEV1/FVC% ratio, FEF25-75 and FEF75-85 were reduced significantly (p less than 0.001) in the exposed group. The reduction was more marked in the smoking glass bangle workers indicating additive effect of cigarette smoking on the small airways. The exposed group showed a significantly higher prevalence (16.3%) of respiratory impairment in comparison to that observed in the controls (7.9%) as a result of exposure to various metals in the work environment (p less than 0.01). The respiratory impairment observed in the exposed group indicated primarily restrictive pattern of pulmonary abnormality (10.4%), while the controls revealed only 1.1% prevalence of this disease (p less than 0.001). The effect of the duration of exposure on the prevalence of respiratory impairment in the glass bangle industry revealed significantly higher prevalence (p less than 0.05) in those who worked for more than 10 years (23.0%) than in those who worked for less than 10 years (10.8%) thereby indicating that the duration of exposure is directly related to the prevalence of respiratory impairment.

Adult↗
PubMed1994

Fibrous glass and cancer.

Some argue that fibrous glass (glass wool) should not be considered as a likely human carcinogen and hence should not be listed in the Seventh Annual Report on Carcinogens (ARC) prepared by the National Toxicology Program (NTP) and mandated by the U.S. Congress. In examining this issue, data from both laboratory experiments (animal studies) and epidemiologic studies (human data) are reviewed with the results evaluated according to the criteria established by the International Agency for Research on Cancer (IARC) and adopted in slightly modified form by the NTP for classifying substances as human carcinogens or likely human carcinogens. From our comprehensive review of the available information, we conclude that fibrous glass materials are carcinogenic, and in view of the NTP and IARC definitions should be listed in the ARC. Our review then examines the carcinogenic potency of glass fibers to humans in comparison with asbestos fibers and concludes that on a fiber-per-fiber basis, glass fibers may be as potent or even more potent than asbestos. The implications of these findings are then presented for regulatory purposes in the occupational setting.

Administration, Inhalation↗
PubMed2001

Enzyme stabilization by covalent binding in nanoporous sol-gel glass for nonaqueous biocatalysis.

A unique nanoporous sol-gel glass possessing a highly ordered porous structure (with a pore size of 153 A in diameter) was examined for use as a support material for enzyme immobilization. A model enzyme, alpha-chymotrypsin, was efficiently bound onto the glass via a bifunctional ligand, trimethoxysilylpropanal, with an active enzyme loading of 0.54 wt%. The glass-bound chymotrypsin exhibited greatly enhanced stability both in aqueous solution and organic solvents. The half-life of the glass-bound alpha-chymotrypsin was >1000-fold higher than that of the native enzyme, as measured either in aqueous buffer or anhydrous methanol. The enhanced stability in methanol, which excludes the possibility of enzyme autolysis, particularly reflected that the covalent binding provides effective protection against enzyme inactivation caused by structural denaturation. In addition, the activity of the immobilized alpha-chymotrypsin was also much higher than that of the native enzyme in various organic solvents. From these results, it appears that the glass-enzyme complex developed in the present work can be used as a high-performance biocatalyst for various chemical processing applications, particularly in organic media. Published by John Wiley & Sons

Chymotrypsin↗
PubMed2002

Bioactive glass as bone-graft substitute for posterior spinal fusion in rabbit.

Bioactive glass S53P4 and autogenous bone were studied as bone graft materials for spinal fusion in a rabbit model. Sixteen rabbits underwent surgery by a dorsal approach. A bioactive glass, a combination of bioactive glass and autogenous bone (70/30 vol%), and autogenous bone were implanted at two thoracolumbar vertebraes for 4 and 12 weeks. The volume, consolidation to vertebrae, and fusion of the graft material were evaluated with plain-film radiology, computed tomography (CT) and bone-mineral density measurements, and compared with histomorphometrical measurements. Radiological consolidation by CT of bone graft to underlying vertebrae at 12 weeks was observable in all groups. This was histologically confirmed as bone was growing from the vertebrae into the graft material. Radiologic fusion of vertebraes was, at 12 weeks, observable in all groups in 50--75% of the cases. The radiologic fusion seen at the CT scans could, however, not be confirmed by histology in any of the three groups. Significant differences for graft material and observation period with the use of bone-mineral density measurements (Hounsfield units) were also observable, with the highest measured values for the bioactive glass group and the lowest for the autogenous bone group. The results indicate that bioactive glass have potential as bone-graft material in spinal fusion. The reliability of radiologic evaluation methods in spinal surgery using bone substitutes is also questioned and discussed.

Animals↗
PubMed2002

Porous polymer/bioactive glass composites for soft-to-hard tissue interfaces.

Porous composites consisting of a polysulfone (or cellulose acetate) matrix and bioactive glass particles were prepared by phase separation techniques. Microstructures were designed for potential application as an interconnect between artificial cartilage and bone. The effects of polymer type, concentration and molecular weight, as well as bioactive glass size and content, on the microstructures of the composites were studied. The composites have asymmetric structures with dense top layers and porous structures beneath. The microstructural features depend most strongly on the type of polymer, the interaction between the polymer and bioactive glass, and the glass content. The dense top layer could be removed by abrasion to make a structure with large pores (20-150 microm) exposed. Composites were immersed in simulated body fluid at body temperature. The growth of hydroxycarbonate apatite inside and on the composites demonstrates their potential for integration with bone. Composite modulus and break strength increased with increasing glass content due to the change in composition and pore content.

Adsorption↗
PubMed1981

The ultrastructure of the interface between a glass ceramic and bone.

The interface of alkali-poor glass ceramic implanted in femora of male Sprague-Dawley rats shows soft tissue, chondroid, osteoid, and bone in connection with the implant. The ultrastructure of the interface with soft tissue mainly exhibits a corrosion process, during which the dissolution of the crystalline phase of the glass ceramic precedes the dissolution of the glassy phase. Macrophages are involved in this process phagocytosing debris of the glassy phase and removing as well as dissolving the remainders of the glass ceramic. Under circumstances not yet fully understood, the corrosion stops, and ground substance like material is deposited, which can be, at least partially, mineralized. After the disappearance of macrophages, chondroblasts, and/or osteoblasts lay down collagen fibrils and ground substance in which matrix vesicles are discernible, representing initial foci of mineralization. Areas with bone connection display collagen fibers and deposits of apatite crystals in close relationship to the bulk glass ceramic as well as small particles mainly derived from the glassy phase of the implant, providing the micromorphological substrate for the shearing and tensile strength of the interface between glass ceramic and bone.

Animals↗
PubMedDate not supplied

A new glass-ceramic for bone replacement: evaluation of its bonding to bone tissue.

Glass powders (350 mesh) of the composition MgO, 4.6; CaO, 44.9; SiO, 34.2; PO, 16.3; CaF, 0.5 in weight ratio were compacted, heated to 1050 degrees C at a rate of 5 degrees C/min and kept at 1050 degrees C for 2 h. The resultant glass-ceramic having oxyapatite, fluoroapatite, and wollastonite crystals showed high bending and compressive strengths of 157 and 1060 MPa, respectively. The biocompatibility and bonding ability of this new glass-ceramic to the bone tissue was evaluated using rabbit tibial bones, and the failure load to break the bonding of several ceramics (the new glass-ceramic, dense hydroxyapatite, 45S5 Bioglass, alumina-ceramic) to bone tissues was measured. The new glass-ceramic showed tight bonding to bone comparable with dense hydroxyapatite, and in 25 weeks its load was 70% of that of bone tissue.

Animals↗
PubMed1989

Mechanical properties of BIS-GMA resin short glass fiber composites.

The use of short glass fibers as a filler for dental restorations or cement resins have not been examined extensively. The mechanical properties and untreated glass fibers (5 microns dia x 25 microns) in Bis-phenol A glycidyl methacrylate (BIS-GMA) diluted with triethylene-glycol dimethacrylate (TEGDMA) resin were investigated for possible use as a restorative dental composite or bone cement. Compression, uniaxial tension and fracture toughness tests were conducted for each filler composite mixtures of 40, 50, 60 and 70%. Set time and maximum temperature of polymerization were determined. The results show that the elastic modulus, tensile strength and compressive strength are dependent on the percent of filler content. Elastic modulus and compressive yield (0.2%) strength of silane treated glass fibers filled composite increased from 2.26 to 4.59 GPa and 43.3 to 66.6 MPa, respectively, wtih increasing the filler content while the tensile strength decreased from 26.7 to 18.6 MPa. The elastic modulus of the untreated composite was less than that of the silane treated fiber composite. The tensile strength and compressive strengths were 20 to 50% lower than those of silane treated composites. The fracture toughness of the silane treated glass fiber additions were not significantly different from the untreated additions. The highest fracture toughness was obtained at 50% filler content with 1.65 MPa m.5. Set time increased from 3.5 to 7.7 minutes with increased filler content and peak temperature dropped from 68.3 to 34 degrees C. The results of this study indicate that the addition of silane coated glass fiber to BIS-GMA resin increased the elastic modulus, tensile and compressive strengths compared with non-treated fibers. The addition of either treated or non-treated fibers increased the set time of the material and decreased the maximum temperature.

Bisphenol A-Glycidyl Methacrylate↗
PubMed1993

Dissolution, leaching, and Al2O3 enrichment at the surface of bioactive glasses studied by solution analysis.

Five glass compositions in or near the bioactive region in the system SiO2-Na2O-CaO-P2O5-Al2O3-B2O3 were studied in vitro by immersion in Tris buffer. The Si concentration can be taken as a measure of the amount of dissolved glass, whereas the Na concentration can be used to estimate the thickness of the Si-rich (Si gel) layer. Upon immersing a bioactive glass into Tris buffer, a surface layer of a few micrometer thickness is dissolved during the first 8 h. During the first few hours of immersion, the rate of dissolution of the glass network is equal to or exceeds that of the growth of the Si-rich layer. If the glass contains Al2O3, most of the aluminum that would be released due to dissolution of the silica network is enriched in the Si-rich surface layer that forms due to leaching. Al2O3 is not only bonded by the Si gel but also interferes with formation of calcium phosphate.

Aluminum Oxide↗
PubMed1993

Solution effects on the surface reactions of three bioactive glass compositions.

The in vitro five-stage surface reactions of two bioactive glass compositions, 45S5 and 52S4.6, and one bioinert glass, 60S3.8, exposed to three simulated body fluids (SBF) were analyzed using Fourier Transform infrared Spectroscopy (FTIR). There was little effect of SBF composition on ion exchange, silica hydrolysis, and silica polymerization (stages 1-3) of glass with silica content up to 52 wt%. However, calcium and phosphate ions in SBF accelerated the formation of an amorphous calcium-phosphate (a-CP) layer (stage 4), and crystallization (stage 5) of the hydroxycarbonate apatite (HCAp) layer. The magnesium ions had a retardation effect on the kinetics of stages 4 and 5, but little effect on stages 1-3. In SBF solutions which contained calcium and phosphate ions an amorphous calcium-phosphate (a-CaP) layer formed on even a 60S3.8 glass which was not bioactive in vivo. However, the a-CaP layer did not crystallize to form HCAp. Thus, there is a significant contribution from the ions present in the SBF solutions to the HCAP formation and crystallization of HCAp on bioactive glasses. Also, silanol repolymerization is necessary for rapid crystallization of HCAp.

Apatites↗
PubMed1995

Bone-bonding behavior under load-bearing conditions of an alumina ceramic implant incorporating beads coated with glass-ceramic containing apatite and wollastonite.

Alumina ceramic with a porous surface coated with glass-ceramic containing apatite and wollastonite (AW-GC) was implanted in a state of press-fit under load-bearing conditions in the femoral condylus of the mongrel dog and compared with a non-glass-ceramic-coated alumina ceramic. A trapezoid alumina ceramic implant (7 x 10 x 5 mm) with a lateral recess (0.9 mm deep) coated with alumina ceramic beads (mean diameter, 750 microns) in a single layer was prepared. The alumina ceramic beads were bonded to the alumina ceramic substratum using an identical alumina binder. The thickness of coating was 10-50 microns (mean, 30 microns). The surface of the beads and the substratum of the alumina implant were coated with AW-GC. A pull-out test and histologic examination were performed at 4, 8, and 24 weeks after implantation. The interfacial shear load was significantly increased from 8 to 24 weeks in both groups. The shear load of the glass-ceramic-coated implant was significantly greater than that of the noncoated implant at every stage. The interface shear load of the noncoated implant was 12.13 +/- 2.76 kg at 4 weeks, 13.92 +/- 4.18 kg at 8 weeks, and 24.17 +/- 5.17 kg at 24 weeks after implantation. The interface shear load of the glass-ceramic-coated implant was 17.96 +/- 2.81 kg at 4 weeks, 24.92 +/- 9.87 kg at 8 weeks, and 34.83 +/- 4.12 kg at 24 weeks after implantation. Histologic examination showed more ingrown bone tissue in the glass-ceramic-coated implants. It is suggested that AW-GC stimulated the bone ingrowth.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed2003

Suppression of subcritical crack growth in a leucite-reinforced dental glass by ion exchange.

Glass-ceramic materials are frequently used in prosthetic dentistry because of their excellent esthetics. Problematic aspects of glass ceramics are their limited strength, the scatter in their strength data, and their time-dependent strength decrease due to subcritical crack growth effects. The short-term strength level can be significantly increased by an ion-exchange process in a potassium salt. A dual ion-exchange process in KNO3/NaNO3 can additionally improve the scatter-in-strength. The objective of the present study was to examine the effect of a single and a dual ion-exchange process on the characteristic time-dependent strength decrease of a leucite-reinforced dental glass. The parameters of subcritical crack growth were evaluated by using the constant stress rate flexural strength test. Both ion-exchange processes showed a pronounced effect on the subcritical crack growth of the glass-ceramic material. The exponential crack parameter n was increased from 25 to 52 by the single-exchange and to 107 by the dual-exchange process, respectively. We conclude that the time-dependent strength decrease of a dental glass-ceramic material can be significantly limited by the ion-exchange process. This could improve the clinical reliability of dental restorations made from this class of materials.

Aluminum Silicates↗