Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Alginates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 901 records · Page 50Linked to original sources
PubMed2006

The influence of implantation site on the biocompatibility and survival of alginate encapsulated pig islets in rats.

This work investigated the impact of implantation sites on the biocompatibility of alginate encapsulated pig islets. Non-diabetic rats were implanted with adult pig islets encapsulated in alginate either intraperitoneally (IP; n=25), subcutaneously (SC; n=37) or under the kidney capsule (KC; n=34). Capsule biocompatibility (retrieval rate, capsule diameter, degree of capsule broken and cellular overgrowth, CD68/CD3 staining) as well as islets viability and functionality were assessed until 30 days after transplantation. Implantation site did not significantly influence the biocompatibility of empty alginate capsules after transplantation (n=48). Most of the empty capsules (>90%) were retrieved after harvesting and were free of cellular overgrowth until day 30 post-transplantation. Three days after implantation, no significant difference for encapsulated pig islets was observed in terms of capsule biocompatibility and islet functionality in peritoneum, KC or subcutaneously. However, between days 5 and 30 after transplantation, explanted capsules from IP demonstrated a higher degree of broken capsules (>13%) and capsules with severe cellular overgrowth (>50%, CD68+ infiltration) than capsules removed from SC and KC (p<0.05). This was associated with a significant reduction of islet viability, insulin content and insulin secretion. In rats, the peritoneum site seems not appropriate for promoting the engraftment of encapsulated pig islets. Kidney subcapsular and subcutaneous spaces represent an interesting alternative.

Alginates↗
PubMed2006

Cell-compatible covalently reinforced beads obtained from a chemoenzymatically engineered alginate.

A chemoenzymatic strategy has been exploited to make covalently linked alginate beads with high stability. This was achieved by grafting mannuronan (alginate with 100% mannuronic acid (M)) with methacrylate moieties and then performing two enzymatic steps converting M to guluronic acid (G) in alternating sequences (MG-blocks) and in G-blocks. In this way a methacrylate grafted alginate with better gel-forming ability was achieved. Covalent bindings were introduced into the beads by using a photoinitiating system that initiated polymerization of the methacrylate moieties. The covalent links were demonstrated by beads remaining intact after treatment with EDTA. The new chemoenzymatic photocrosslinked (CEPC) beads were compatible with cells with low post-encapsulation ability like C2C12 myoblasts and human pancreatic islets. The islets continued secreting insulin after encapsulation. On contrary, cells with a high post-encapsulation proliferative ability like 293-endo cells died within 2-week post-encapsulation. The exceptional stability and the cell compatibility of the new CEPC beads make them interesting as bioreactors for delivering therapeutic proteins in future applications.

Alginates↗
PubMed2006

Characterizing short-term release and neovascularization potential of multi-protein growth supplement delivered via alginate hollow fiber devices.

Multi-protein (10-250 kDa) endothelial cell growth supplement (ECGS) contains growth factors of varying sizes resulting in advanced release rates from diffusion-based drug delivery devices. As a result, the biochemical stimulus provided by ECGS for neovascularization in the critical initial stages of cell transplantation in artificial organs may differ from that for single growth factor delivery. In this study, both in vitro and in vivo studies were conducted with ECGS to correlate in vitro release of multiple angiogenic growth factors to vascularization potential in vivo. The short-term release of ECGS from calcium alginate gels supported in the lumen of polypropylene (PP) hollow fibers was investigated in vitro for up to 142 h. The overall time constant increased from 2, 2.2 and 6.3 h as the alginate concentration was increased from 1.5%, 2% and 3%, respectively. However, time constants for individual species ranged from 1.5 to 77 h. The in vivo bioactivity of released ECGS was assessed for up to 21 days using a Lewis rat model implanted with 1.5% calcium alginate gels supported in PP and polysulfone hollow fibers. For the ECGS-releasing PP hollow fiber system, a two-fold increase in neovascularization with respect to the control was observed for the period between 7 and 17 days post-implantation at the device-tissue interface (p<0.05).

Alginates↗
PubMed2006

Inhibition of in vitro chondrogenesis in RGD-modified three-dimensional alginate gels.

The goal of this study was to investigate the effects of adhesion to the arginine-glycine-aspartic acid (RGD) sequence on the chondrogenesis of bone marrow stromal cells (BMSCs). Synthetic RGE- and RGD-containing peptides were conjugated to sodium alginate, and bovine BMSCs were seeded onto 2D alginate surfaces or encapsulated in 3D gels. BMSCs spread specifically on RGD-modified surfaces, and spreading was inhibited by a soluble RGD peptide and by anti-beta1 and anti-alpha(v)beta3 integrin blocking antibodies. After 7 days in 3D gel culture, the chondrogenic supplements (TGF-beta1 and dexamethasone) significantly stimulated chondrocytic gene expression (collagen II, aggrecan, and Sox-9) and matrix accumulation (collagen II and sGAG) in RGE-modified gels, but this response was inhibited in the RGD-modified gels. Inhibition of sGAG synthesis increased with increasing RGD density, and synthesis was partially rescued by adding a soluble RGD peptide. Addition of an anti-alpha(v)beta3 integrin blocking antibody had no effect on chondrogenesis, while an anti-alpha5 antibody reduced sGAG accumulation. Overall, this study demonstrates that interaction with the RGD motif significantly inhibits the initial chondrogenesis of BMSCs within 3D alginate gels. These results provide new insights into the role of cell-matrix interactions in regulating chondrogenesis and highlight the importance of choosing appropriate biomaterials for tissue engineering therapies.

Adsorption↗
PubMed2006

Physical and biological properties of barium cross-linked alginate membranes.

We describe the manufacture of highly stable and elastic alginate membranes with good cell adhesivity and adjustable permeability. Clinical grade, ultra-high viscosity alginate is gelled by diffusion of Ba2+ followed by use of the "crystal gun" [Zimmermann H. et al., Fabrication of homogeneously cross-linked, functional alginate microcapsules validated by NMR-, CLSM- and AFM-imaging. Biomaterials 2003;24:2083-96]. Burst pressure of well-hydrated membranes is between 34 and 325kPa depending on manufacture and storage details. Water flows induced by sorbitol and raffinose (probably diffusional) are lower than those caused by PEG 6000, which may be related to a Hagen-Poiseuille flow. Hydraulic conductivity, L(p), from PEG-induced flows ranges between 2.4x10(-12) and 6.5x10(-12) m Pa(-1)s(-1). Hydraulic conductivity measured with hydrostatic pressure up to 6 kPa is 2-3 orders of magnitude higher and decreases with increasing pressure to about 3x10(-10) m Pa(-1)s(-1) at 4kPa. Mechanical introduction of 200 microm-diameter pores increases hydraulic conductivity dramatically without loss of mechanical stability or flexibility. NMR imaging with Cu2+ as contrast agent shows a layered structure in membranes cross-linked for 2h. Phase contrast and atomic force microscopy in liquid environment reveals surface protrusions and cavities correlating with steps of the production process. Murine L929 cells adhere strongly to the rough surface of crystal-bombarded membranes. NaCl-mediated membrane swelling can be prevented by partial replacement of salt with sorbitol allowing cell culture on the membranes.

Alginates↗
PubMed2005

Environmental effects and desorption characteristics on heavy metal removal using carboxylated alginic acid.

Effects of ionic strength and organic materials on copper ion uptake capacity using carboxylated alginic acid which showed very high metal ion uptake capacity were investigated. The ionic strength only had a slight effect on the decrease of copper ion uptake capacity regardless of NaCl concentration. And, the effect of organic materials such as NTA (nitrilotriaceticacid) and sodium hypophosphite on the copper ion uptake capacity was negligible. When the lead ion adsorbed on carboxylated alginic acid was desorbed by NTA, which showed high desorption efficiency, the best optimum concentration of NTA was about 0.01 M. Also desorption efficiency decreased, however, concentration factor increased as S/L ratio which is defined as the ratio of adding amount of adsorbed and volume of desorbing agent increased. In sequential adsorption and desorption cycles, the lead uptake capacity on carboxylated alginic acid was relatively maintained through cycles 1-5.

Adsorption↗
PubMed2003

cDNA cloning of an alginate lyase from abalone, Haliotis discus hannai.

An alginate lyase, termed HdAly in the present paper, was isolated from the hepatopancreas of abalone, Haliotis discus hannai, by ammonium sulfate fractionation, followed by TOYOPEARL CM-650M column chromatography. Enzymatic properties of HdAly were similar to those of previously reported Haliotis and Turbo poly(M) lyases, e.g., it preferentially degraded a poly(beta-D-mannuronate)-rich substrate with an optimal pH and temperature at pH 8.0 and 45 degrees C, respectively. In order to determine the primary structure of abalone lyase that is still poorly understood, cDNAs for HdAly were cloned by PCR from the abalone hepatopancreas cDNA library and sequenced. From the nucleotide sequences of the cDNAs, the sequence of 909 bp in total was determined, and the amino acid sequence of 273 residues was deduced from the translational region of 822 bp locating at nucleotide positions 27-848. The N-terminal region of 16 residues, except for the initiation Met in the deduced sequence, was regarded as the signal peptide since it was absent in the HdAly protein and showed high similarity to the consensus sequence for signal peptides of eukaryote secretary proteins. This suggests that HdAly is initially produced as a precursor possessing the signal peptide in hepatopancreatic cells and then secreted into digestive tract as the mature form. Thus, the mature HdAly was regarded to consist of 256 residues with the calculated molecular mass of 28895.5 Da. The amino acid sequence of HdAly showed 85 and 28% identity to those of Turbo cornutus alginate lyase SP2 and the C-terminal region of Chlorella virus lyase-like protein CL2, respectively, while it showed no significant identity to those of any bacterial alginate lyases. In order to provide the basis for the structure-function studies and various applications of the abalone lyase, a bacterial expression system was constructed by means of the HdAly-cDNA and pET-3a expression plasmid. Although the active recombinant HdAly was hardly produced at a cultivation temperature 37 degrees C in Escherichia coli BL21 (DE3), a small amount of soluble and active enzyme could be produced when the temperature was lowered to 19 degrees C.

Alginates↗
PubMed2005

Periodate oxidation of sodium alginate in water and in ethanol-water mixture: a comparative study.

Periodate oxidation of sodium alginate in aqueous solution as well as a dispersion in 1:1 ethanol-water was examined. The oxidation proceeded smoothly in both media, and the kinetics of oxidation was surprisingly similar. Polymer cleavage was observed in both media, but it was extensive in ethanol-water. The weight-average molar mass (Mw) of the oxidized product obtained from aqueous solution showed a gradual decrease with increase in the periodate concentration, whereas, except for very high periodate equivalent, the change in Mw was not reflected with increase in concentration of periodate in ethanol-water. The oxidized alginate obtained from the ethanol-water mixture was found to be more efficient in crosslinking proteins such as gelatin, leading to hydrogels. Oxidation of a dispersion has the advantage of generating large quantities of the oxidized alginate in higher yield with one reaction using less solvent.

Alginates↗
PubMed2005

Decoloration of textile dyes by alginate-immobilized Trametes versicolor.

Alginate-immobilized Trametes versicolor decolorized Amaranth at similar rates in repeated batch culture when the dye was present in either (i) modified Kirk's medium containing 0.22 gl(-1) ammonium tartrate, (ii) the same buffer, thiamine, trace elements and glucose concentrations as in the modified Kirk's medium, or (iii) glucose alone at either 1, 5 or 10 gl(-1). With glucose alone (0.5 gl(-1)), Amaranth, Reactive Black 5, Reactive Blue 19 and Direct Black 22 had first-order decoloration rate constants of 0.56, 0.76, 0.52, and 0.15 h(-1), respectively. Mixtures of these dyes were also completely decolorized. After four successive decolorations, beads were kept in storage solutions for 48 d at 6 degrees C. CaCl2 (1g l(-1)) was the best storage solution as the beads were easier to handle and had the fastest decoloration rates after storage. Decoloration rates were faster with lower viscosity (less than 2000 cps) alginates and with softer beads which had a lower resistance to compression. Fungal colonization of the beads resulted in higher biomass concentrations with a corresponding higher decoloration rate but the beads became larger, had a lower resistance to compression and a higher percentage of bead breakage in a stirred tank reactor. Biomass, recovered from beads in which there was no growth, could be dispersed while the biomass from colonized beads formed a hollow, spherical shell due to growth on and near the bead surface and no growth in the bead interior. If alginate-immobilized T. versicolor is to be used in a stirred tank reactor, a high biomass loading during the immobilization phase and no fungal growth in the beads is recommended to have high decoloration rates and low bead breakage.

Alginates↗
PubMed2005

Application of high-performance anion-exchange chromatography with pulsed amperometric detection and statistical analysis to study oligosaccharide distributions--a complementary method to investigate the structure and some properties of alginates.

Alginates comprised of essentially alternating units of mannuronic (M) acid-guluronic (G) acid (MG-alginate), and G-blocks isolated from a seaweed where subjected to partial acid hydrolysis at pH 3.5 The chain-length distribution of oligosaccharides in the hydrolysate were investigated by statistical analysis after their separation with high-performance anion-exchange chromatography and pulsed amperometric detection (HPAEC-PAD). Simulated depolymerisation of the MG-alginate provided an estimate of the ratio between two acid hydrolysis rate constants (p=8.3+/-1) and the average distribution of the MM linkages in the original sample of polysaccharide chains. In conclusion, we found HPAEC-PAD together with statistical analysis was a useful method to investigate the fine structure and some properties of binary polysaccharides.

Alginates↗
PubMed2005

Chitosan-reinforced alginate microspheres obtained through the emulsification/internal gelation technique.

Alginate microspheres prepared by emulsification/internal gelation were chosen as carriers for a model protein, hemoglobin (Hb). Reinforced chitosan-coated microspheres were obtained by an uninterrupted method, in order to simplify the coating process, minimize protein losses during production and to avoid Hb escape under acidic conditions. Microspheres recovery was evaluated as well as its morphology by determination of Hb encapsulation efficiency and microscopic observation, respectively. The formation of chitosan membrane made of it interaction with alginate was assessed by DSC (differential scanning calorimetry) and FT-IR (Fourier-transform infrared spectrometry) studies. Spherical uncoated microspheres with a mean diameter of 20 microm and encapsulation efficiency above 89% were obtained. Coated microspheres provided similar encapsulation efficiency but a higher mean diameter was obtained due to microspheres clumping during the coating step. Protein loss occurred mainly during emulsification rather than recovery. FT-IR and DSC together indicated electrostatic interactions between alginate carboxylate and chitosan ammonium groups as the main forces for complex formation. Hb release from microspheres showed a pH-dependent profile and was affected by chitosan coating. Under simulated gastric conditions, a total Hb burst release from uncoated microspheres was decreased with one-stage and two-stage chitosan coatings (68% and 28%, respectively). At pH 6.8, the Hb release from coated microspheres was fast but incomplete. These results suggest an optimization of the coating method to protect Hb under acidic conditions and to permit a complete but sustained release of Hb.

Alginates↗
PubMed2005

Short- and long-term effects of a dietary yeast beta-glucan (Macrogard) and alginic acid (Ergosan) preparation on immune response in sea bass (Dicentrarchus labrax).

The present study investigated the immunomodulatory activity of Ergosan, an algal extract containing alginic acid, and Macrogard, a yeast extract containing beta-glucans, on innate and specific immunity in sea bass (Dicentrarchus labrax). Four cycles of experimental feeding using normal fish feed formulation (control group) supplemented with Ergosan (0.5%) or Macrogard (0.1%) were performed at 60-day intervals (15 days of treatment+45 days of suspension). Serum complement, lysozyme, total proteins and heat shock protein (HSP) concentrations were measured at 15, 30 and 45 days from the end of the first 15-day feeding cycle (short term) and 45 days after the end of each feeding cycle over a 35-week period (long term). The percentage of B- and T-lymphocytes in peripheral blood leucocytes and gut were measured over long-term trial. Significant elevation (P < 0.05) in serum complement activity occurred in sea bass fed with alginic acid and glucans, at 15 days from the end of first cycle of treatment. Significant elevation (P < 0.05) in serum lysozyme, gill and liver HSP concentration were observed in the same experimental groups at 30 days from the end of treatment, whereas a significant increase (P < 0.05) of complement activity was only observed in fish that received an Ergosan diet. At 45 days from the end of treatment, complement, lysozyme and HSP concentration did not differ among groups. Over the long-term period, no significant differences were observed in innate and specific immune parameters, survival, growth performances and conversion index in treated and control fish. A dramatic decrease of both innate and acquired immune parameters was observed during the winter season in all groups, followed by a partial recovery when water temperature increased. Reduction in complement and lysozyme activities was significatively correlated (p < 0.01) to water temperature variation. The results suggested the potential of alginic acid and beta-glucans to activate some innate immune responses in sea bass, and particularly under conditions of immunodepression related to environmental stress.

Alginates↗
PubMed2004

Interaction between alginates and manganese cations: identification of preferred cation binding sites.

Algal and bacterial alginates have been studied by means of 13C NMR spectroscopy in presence of paramagnetic manganese ions in order to reveal the nature of their interaction with bivalent cations. It is found that the mannuronate blocks bind manganese cations externally near their carboxylate groups, while guluronate blocks show the capability to integrate Mn2+ into pocket-like structures formed by adjacent guluronate residues. In alternating mannuronate-guluronate blocks, manganese ions preferentially locate in a concave structure formed by guluronate-mannuronate pairs. Partial acetylation of the alginate generally reduces its capability to interact with bivalent cations, however, the selectivity of the binding geometry is conserved. The results may serve as a hint for the better understanding of the alginate gelation in presence of calcium ions.

Alginates↗
PubMed2004

The influence of chitosan and sodium alginate and formulation variables on the formation and drug release from pellets prepared by extrusion/spheronisation.

The influence of the incorporation of two oppositely charged hydrophilic natural polymers, chitosan and sodium alginate, alone and in combination, on the ability of formulations containing a model drug (paracetamol) to form spherical pellets by the process of extrusion/spheronisation and the properties of the pellets, has been undertaken. A statistically experimental design was employed to allow the major factors which determined the properties of the pellets, to be identified. A standardised procedure was used to prepare the pellets with a ram producing the extrudate for spheronisation. Statistical analysis of the results indicated that the formulation variables of the type and level of the polymer, the proportion of the model drug, and the proportion of the microcrystalline cellulose influenced (a) the quantity of liquid binder required to produce a good formulation (narrow size range and high value for the shape factor indicating sphericity), (b) the steady-state extrusion force, (c) the pellet perimeter, (d) the apparent pellet density and (e) the porosity of the pellets. The median size of the pellets of the "good formulation" could only be related to the chitosan and sodium alginate content of the formulations. The proportion of the drug, chitosan and sodium alginate content of the formulation significantly influenced the in vitro dissolution of the model drug (paracetamol). The drug release mechanism differed with the formulation variables, although if the pellets remained intact during the dissolution test, diffusion was the controlling mechanism. There was no significant advantage to be gained by using a mixture of the two polymers in terms of retarding drug release.

Acetaminophen↗
PubMed2005

Chitosan-alginate multilayer beads for controlled release of ampicillin.

The aim of this study is to develop multilayer beads with improved properties for controlled delivery of the antibiotic ampicillin. Ionotropic gelation was applied to prepare single and multilayer beads using various combinations of chitosan and Ca(2+) as cationic components and alginate and polyphosphate as anions. Beads prepared with higher concentrations of chitosan entrapped more ampicillin. During incubation in simulated gastric fluid, the beads swelled and started to float but did not show any sign of erosion. Single layer chitosan-alginate beads released 70% of the drug within 4 h. Multilayer beads released only 20-30% in the same period of time. During subsequent incubation in simulated intestinal fluid, both single and multilayer beads continued to release drug. At least part of this release is due to disintegration of the beads. The rate of release both in gastric and intestinal fluid and the kinetics of disintegration in intestinal fluid can be controlled by changing the chitosan concentration in the coagulation fluid. The release of the drug can also be controlled by the degree of cross-linking using polyphosphate. Cross-linked multilayer beads were prepared that released only 40% of the entrapped drug during 24 h. It is concluded that chitosan-alginate multilayer beads, cross-linked with polyphosphate offer an opportunity for controlled gastrointestinal passage of compounds with low molecular weight like ampicillin.

Alginates↗
PubMed2005

Molecular interaction in alginate beads reinforced with sodium starch glycolate or magnesium aluminum silicate, and their physical characteristics.

Diclofenac calcium-alginate (DCA) beads were reinforced with different amounts of sodium starch glycolate (SSG) or magnesium aluminum silicate (MAS) and were prepared using ionotropic gelation method. Complex formation of sodium alginate (SA) and SSG or MAS in calcium-alginate beads was revealed using FTIR spectroscopy. Differential scanning calorimetric study indicated that diclofenac sodium (DS) in amorphous form was dispersed in the matrix of DCA beads. The thermal behavior of SSG-DCA and MAS-DCA beads was similar to the control bead. Both additives can improve the entrapment efficiency of DCA beads. The swelling and water uptake of the beads depended on the properties of incorporated additives. The SSG-DCA beads showed a higher water uptake and swelling than MAS-DCA beads. Moreover, the swelling of the beads showed a good correlation with the square root of time. The release kinetic of the beads in pH 6.8 phosphate buffer was swelling controlled mechanism, while that in distilled water followed Higuchi's model. The slower release rate and the longer lag time in pH 6.8 phosphate buffer was obtained from the SSG-DCA and MAS-DCA beads because of complex formation between SA and SSG or MAS. However, SSG in the beads could increase the release of DS from the beads in distilled water because it acted as a channeling agent. In contrast, MAS retarded the release of DS from the beads in distilled water due to the stronger matrix formation.

Alginates↗
PubMed2005

Cross-linking of dried paracetamol alginate granules Part 1. The effect of the cross-linking process variables.

This paper reports on the cross-linking of dried (<5% moisture) paracetamol alginate granules with calcium chloride solutions. The effect of calcium concentration, temperature of the treatment solution, stirring speed and time used during cross-linking of granules on water uptake by the granules during cross-linking and physical properties of the cross-linked and dried granules were studied. A full factorial study of these factors each at two levels was used (CaCl2.2H2O: 20, 100 mg/ml; temperature: 25, 45 degrees C; stirrer speed: 25, 240 rpm; time: 1.5 and 5.5 min) to treat dried stock granules (size: 0.8-1.0 mm) containing the model drug paracetamol and sodium alginate powder (1:1) which were prepared using conventional aqueous granulation under low shear. In addition to SEM and photomicrography, the physical properties studied were water uptake during cross-linking, yield, aggregation behaviour, moisture content, drug content, early stage drug release [over 10 s (R10) and the next 50 s (R50)] and calcium and sodium content of the unwashed cross-linked granules. Dry granules were successfully cross-linked. The treatment factors significantly affected most of the response variables. The variables most affected were water uptake (78-254%), drug entrapment (58-86%), early release (R10: 1.2-6.4% and R50: 3.0-12.2%), granule aggregation (0-70%), calcium (6.02-12.4%) and sodium content (1.2-6.44%). SEM photographs suggest that low calcium treated granules were less porous in nature compared to high calcium treated granules. Low shear drug alginate granules can be cross-linked in dried state. The properties of the cross-linked granules can be modified by altering the treatment process.

Acetaminophen↗
PubMed2005

Mechanisms of formation and disintegration of alginate beads obtained by prilling.

In this paper, compendial sodium alginate beads have been manufactured by laminar jet break-up technology. The effect of polymer concentration, viscosity and polymeric solution flow rate on the characteristics of beads was studied. Size distribution of alginate beads in the hydrated state was strongly dependent on the flow rate and viscosity of polymer solutions, since a transition from laminar jet break-up conditions to vibration-assisted dripping was observed. The re-hydration kinetics of dried beads in simulated gastric fluid (SGF) showed that the maximum swelling of beads was reached after 1-2 h, with an increase in volume of two to three times and a time lag dependent on the polymer concentration. The re-hydration swelling profiles in simulated intestinal fluid (SIF) showed no time lag and higher swelling volume; moreover, in this medium after the maximum swelling was reached, the bead structure was quickly disaggregated because of the presence in the medium of phosphate able to capture calcium ions present in the alginate gel structure.

Alginates↗