Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
PubMed1986

A vacuum microbalance technique for studies on the wettability of powders.

A vacuum microbalance technique has been used to evaluate the wettability of powders. The rate of uptake, and equilibrium weight of uptake, of water vapour onto outgassed powder samples, of differing wettabilities, were determined at different known temperatures. Standard techniques of data analysis were used to establish the enthalpy, entropy and Gibb's free energy of the activation and adsorption processes. The values obtained appeared to be in the correct order of magnitude and those for activation clearly reflected the relative wettability of the powders. Tests for compensation demonstrated that with the exception of phenobarbitone, there was probably a common mechanism producing the adsorption.

Adsorption↗
PubMed1989

Effect of Surface-Active Pseudomonas spp. on Leaf Wettability.

Different strains of Pseudomonas putida and P. fluorescens isolated from the rhizosphere and phyllosphere were tested for surface activity in droplet cultures on polystyrene. Droplets of 6 of the 12 wild types tested spread over the surface during incubation, and these strains were considered surface active; strains not showing this reaction were considered non-surface active. Similar reactions were observed on pieces of wheat leaves. Supernatants from centrifuged broth cultures behaved like droplets of suspensions in broth; exposure to 100 degrees C destroyed the activity. Average contact angles of the supernatants of surface-active and non-surface-active strains on polystyrene were 24 degrees and 72 degrees , respectively. The minimal surface tension of supernatants of the surface-active strains was about 46 mN/m, whereas that of the non-surface-active strains was 64 mN/m (estimations from Zisman plots). After 6 days of incubation, wheat flag leaves sprayed with a dilute suspension of a surface-active strain of P. putida (WCS 358RR) showed a significant increase in leaf wettability, which was determined by contact angle measurements. Increasing the initial concentration of bacteria and the amount of nutrients in the inoculum sprayed on leaves reduced the contact angles from 138 degrees on leaves treated with antibiotics (control) to 43 degrees on leaves treated with surface-active bacteria. A closely related strain with no surface activity on polystyrene did not affect leaf wettability, although it was present in densities similar to those of the surface-active strain. Nutrients alone could occasionally also increase leaf wettability, apparently by stimulating naturally occurring surface-active bacteria. When estimating densities of Pseudomonas spp. underneath droplets with low contact angles, it appeared that populations on leaves treated with a surface-active strain could vary from about 10 to 10 CFU cm, suggesting that the surface effect may be prolonged after a decline of the population. The possible ecological implications are discussed.

Journal Article↗
PubMed2003

Effects of oxygen plasma treatment on the surface wettability and dissolution of furosemide compacts.

The plasma irradiation of furosemide (frusemide) was investigated as a possible technique for increasing the dissolution rate of this drug. Oxygen plasma was used to generate oxygen-containing functional groups on the surface of the compact to increase the wettability of the surface and the dissolution rate of the drug. Compacts of furosemide (300 mg) were produced using a stainless steel die and punch assembly, which was placed into a KBr press. The time of the plasma treatment was varied to assess the effect if any upon the dissolution rate and the wettability of the drug. Dissolution experiments of the plasma-treated and untreated compacts were carried out using the paddle apparatus method. Dissolution was carried out at 37 degrees C using 1 L of 0.1 M HCl and phosphate buffer (pH 6). The wettability was assessed by contact angle measurements using the sessile drop technique. Untreated and plasma-treated samples were analysed by scanning electron microscopy at x 5000 magnification. Plasma treatment was found to lower the equilibrium contact angle from approximately 50 to 35 degrees but the dissolution rate was not significantly affected. This was attributed to fusion of the surface by the plasma treatment.

Diuretics↗
PubMed1983

Effect of substratum wettability and charge on adhesion in vitro and encapsulation in vivo by insect haemocytes.

The circulating leucocytes of insects, the haemocytes, adhere to and encapsulate foreign material that enters the insect's body cavity. The thickness of the capsule depends not only on the insect species but also on the nature of the object concerned, a fact that is of great importance to invading parasites and pathogens. In this paper, some of the factors that may stimulate haemocyte adhesion and subsequent encapsulation of the object have been investigated using abiotic materials with surfaces of different charge and wettability. The negativity and wettability of surfaces of polystyrene beads and plates can be increased by pretreatment with acid, and adhesion of haemocytes to these modified surfaces has been examined in vivo and in vitro. A similar proportion of haemocytes of the locust Schistocerca gregaria adhere to the plates in vitro, irrespective of the changes in charge and wettability, but the adhesion of haemocytes of the cockroach Periplaneta americana is proportional to the increases in both parameters. These differences in cell behaviour are reflected in vivo: cockroach haemocytes form thicker capsules around more hydrophilic and more negatively charged polystyrene beads, while locust cells encapsulate both types of surface to the same, minimal, degree. Positively and negatively charged Sepharose beads are encapsulated more thickly than are neutral beads in cockroaches; negatively charged Sepharose beads are not encapsulated at all in locusts. There are thus obvious differences between the two species in the ways in which their haemocytes respond to these modified abiotic surfaces. It is suggested that capsule thickness in vivo depends on the initial cell-substratum contact; different surfaces stimulate the cell to different extents, which in turn causes variations in the recruitment of other cells to the capsule.

Animals↗
PubMed1989

Hydrogel lens wettability during overnight wear.

The in vivo wettability of soft contact lenses worn by a group of 10 subjects was monitored over a 24-hour period including 8 hours closed eye. Two types of lenses were tested: Igel 67 (Prima) and Bausch & Lomb 70. They were each worn once in both eyes by all the subjects. The in vivo wettability of the lenses tested was evaluated by measuring the pre-lens non-invasive break-up-time (NIBUT) and assessing the nature of the pre-lens tear film structure. The results obtained showed good wettability throughout the study and no difference between the two materials tested, but a significant difference between open and closed eye wear. The tear film was far more stable (p less than 0.01) immediately upon waking (mean NIBUT 21.2 s) than during open eye wear (mean NIBUT 11.2 s). Also at waking the pre-lens lipid layer was thicker than during open eye wear and the lens surface had a greater mucous coating. The presence of a more stable pre-lens tear film at waking was associated with a different tear film structure. We believe these differences in pre-lens tear film structure are responsible for the greater stability recorded.

Adult↗
PubMed1998

Relative importance of surface wettability and charged functional groups on NIH 3T3 fibroblast attachment, spreading, and cytoskeletal organization.

Understanding the relationships between material surface properties, adsorbed proteins, and cellular responses is essential to designing optimal material surfaces for implantation and tissue engineering. In this study, we have prepared model surfaces with different functional groups to provide a range of surface wettability and charge. The cellular responses of attachment, spreading, and cytoskeletal organization have been studied following preadsorption of these surfaces with dilute serum, specific serum proteins, and individual components of the extracellular matrix. When preadsorbed with dilute serum, cell attachment, spreading, and cytoskeletal organization were significantly greater on hydrophilic surfaces relative to hydrophobic surfaces. Among the hydrophilic surfaces, differences in charge and wettability influenced cell attachment but not cell area, shape, or cytoskeletal organization. Moderately hydrophilic surfaces (20-40 degree water contact angle) promoted the highest levels of cell attachment. Preadsorption of the model surfaces with bovine serum albumin (BSA) resulted in a pattern of cell attachment very similar to that observed following preadsorption with dilute serum, suggesting an important role for BSA in regulating cell attachment to biomaterials exposed to complex biological media.

3T3 Cells↗
PubMed2002

In vitro mineralization of a glass-ceramic of the MgO-3CaO x P2O5-SiO2 system: wettability studies.

The calcium phosphate deposition on the surface of a bioactive glass-ceramic of the MgO-3CaO. P(2)O(5)-SiO(2) system during a 1-week immersion in biological model fluids, was investigated through wettability studies. Two model fluids with chemical composition similar to the human blood plasma were tested: Hanks' balanced salt solution (HBSS) and a simulated body fluid (SBF) with a higher calcium content. The effect of the presence of albumin, both in solution or previously adsorbed to the surface, was assessed. The behavior observed using two SBF solutions prepared with and without TRIS buffer was compared. The surface free energy of the glass-ceramic samples was determined, before and after immersion, and dynamic contact angle analysis was performed using the biological model fluids as scanning liquids. Scanning electron microscope observations and x-ray photoelectron spectroscopy (XPS) analysis were performed to complement the wettability studies. The experimental results led to the conclusion that the precipitation of a calcium phosphate film in HBSS occurred mainly when the immersion solution was renewed daily or in the presence of adsorbed albumin. In SBF, the addition of TRIS buffer seemed to inhibit the formation of the calcium phosphate film.

Biocompatible Materials↗
PubMed1993

Effect of plasma treatment on the wettability of elastomeric impression materials.

This study investigated the effect of "plasma treatment" on the wettability of impression materials and void formation in die stone casts. Four addition reaction silicones, one condensation reaction silicone, and one polyether impression material were used. Wettability was determined before and after plasma treatment by contact angle registration of a saturated aqueous solution of calcium sulfate (CaSO4) on flat surfaces made from the tested impression materials. Two groups of surfaces were used for each material. The surfaces in one of the groups were exposed to saliva for 5 minutes. The same impression materials were used to produce four groups of die stone casts from a master die. Two groups were produced from impressions that had been exposed to milk. One group from the exposed and one from the bare surfaces were plasma-treated before pouring. Voids in the stone casts were counted under a stereoscopic microscope. The results indicated that after plasma treatment, the drop of CaSO4 solution completely spread over the addition type silicone surfaces. The corresponding die stone casts were found to be void free. It was concluded that plasma treatment produced high-energy impression surfaces that result in void-free die stone casts from the addition type silicone materials.

Adult↗
PubMed1993

Fat in bone xenografts: importance of the purification procedures on cleanliness, wettability and biocompatibility.

Xenografting is a promising alternative to allografts and autografts. The remaining lipids in bone are known to influence the biocompatibility. A comparative study of wettability was done on standardized blocks of two biomaterials. A highly purified and defatted bovine bone graft (T650) was found to retain more water (2.06 g/block) than a less defatted biomaterial (T360, 0.3 g/block). Wettability, observed in the laboratory, may reflect an important in vivo property: the rapidity for extracellular fluids and blood cells to invade the graft and carry bone forming cells. When implanted in rabbit cancellous bone, T650 appears to be osteoconductive in a manner that allows trabecular architecture to be restored within 6 months.

Animals↗
PubMed1994

Wettability and fluid saturations determined from NMR T1 distributions.

The abundance and distribution of brine and decane are determined from T1 distributions at different stages of a water-flood test in water-wet and oil-wet chalks. The T1 distributions generated from multi-exponential decomposition of inversion-recovery data provide more information than obtained from stretched and bi-exponential fits. Chalk samples because of their uniform pore size and ideal sedimentary rocks for NMR investigations of wettability since water and decane interactions with pore walls of differing wettability are easily distinguished.

Calcium Carbonate↗
PubMed2004

On the wettability of soft tissues in the human oral cavity.

In this study, the wettability of gingival surfaces in the human oral cavity was assessed by the measurement of intra-oral water contact angles. Intra-oral water contacts angles were measured in the morning prior to tooth brushing, immediately after tooth brushing and prior to and after lunch in order to reveal the influences of toothpaste and dietary components on the wettability of the gingiva. Within a group of 10 volunteers, gingival surfaces were hydrophobic, with water contact angles ranging from 72 to 79 degrees, which is high as compared with other soft tissues in the human body. Gingival contact angles were not affected by most commercial toothpastes involved in this study, but decreased slightly to 65 degrees after brushing with a hexametaphosphate containing toothpaste. During the day, however, the hydrophobicity readily recovered and after lunch contact angles on the gingival surfaces were higher than early in the morning, now ranging from 76 to 83 degrees. It is generally known that soft tissues in the human body involved in adsorptive and exchange functions and requiring lubrication are more hydrophilic than tissues with more protective functions. This study shows that gingival surfaces classify as the most hydrophobic soft tissue in the human body, attesting to their important protective role in the oral cavity.

Dentifrices↗
PubMed2004

Search for technological reasons to develop a capsule or a tablet formulation with respect to wettability and dissolution.

Proquazone, a poorly wettable compound, was used as a model drug in the search for reasons to develop a capsule or tablet formulation. The capsules were filled with proquazone as active ingredient, with lactose monohydrate (200 mesh) as filler and with magnesium stearate as lubricant. The tablet was made out of a granulate as internal phase which consisted of proquazone as active ingredient, lactose as filler, corn starch as disintegrant and PVP as a binding agent. The external phase consisted of magnesium stearate and corn starch. The concentration of proquazone in the capsule and in the tablet formulation was varied. The capsule formulations showed a significantly slower dissolution of the drug substance than the tablet formulations especially for a high-drug load. Independently of the drug load, only the tablet formulation showed a high-dissolution rate. Thus, concerning drug load, only the tablet formulations showed to be robust. It became clear that proquazone needs to be formulated as a granulate or a tablet to achieve a fast dissolution rate. Thus, a poorly wettable drug, especially when it is found in high concentrations, can have direct impact on the decision to develop a tablet or a capsule formulation.

Capsules↗
PubMed1995

Wettability of denture soft-lining materials.

Data on the wettability of long-term resilient denture base lining materials have previously been obtained by static methods. This study determined the dynamic contact angle of a range of long-term resilient lining materials and the surface free energy properties of these materials. This method was a rapid and convenient method for determining wettability parameters. The equilibrium contact angle revealed the Flexor and Novus materials to be the least wetted with the Molloplast-B material, and CoeSuper-Soft material was wetted similarly to Trevalon material. The contact angle hysteresis indicated that all the soft-lining materials tested would improve denture stability under dislodgment forces. The surface-free energies appeared to be similar for all the soft-lining materials but were significantly lower than that of Trevalon.

Acrylic Resins↗
PubMed2003

On the influence of flow conditions and wettability on blood material interactions.

In this review, we hypothesise that, next to biocompatibility, optimal blood compatibility depends on a combination of biomaterials wettability and the shear stress prevailing in the device. The wettability is discussed in seven different categories of devices, that differ substantially from each other with regard to shear stress and exposure time. These seven categories are stents, prosthetic heart valves, vascular prostheses, cardiopulmonary bypass, hemodialysis, vena cava filters and blood bags. In high shear applications, in combination with blood activation, platelet deposition and thrombosis appear to be major problems and platelet inhibitors are most effective. Exposure of blood to a large biomaterial surface, with or without antithrombotic coating, results in reduction of platelet function. Material-independent activation aggravates this process. In low shear applications, platelets only seem supportive for coagulation and anticoagulants should be used.

Animals↗
PubMedDate not supplied

Quantitative estimates of porous media wettability from proton NMR measurements.

Nuclear magnetic resonance (NMR) relaxation time distributions provide information on the abundance and distribution of two immiscible fluids in the pores of fine-grain chalk samples. A model based on relative shifts of the water-relaxation component as a function of saturation results in a wettability index that is strongly correlated with independent dynamic measurements of wettability. Scales of wetting-phase film thickness for NMR and dynamic measurements explain differences in results between the two methods.

Calcium Carbonate↗
PubMed2005

Bioinspired surfaces with special wettability.

Biomimetic research indicates that many phenomena regarding wettability in nature, such as the self-cleaning effect on a lotus leaf and cicada wing, the anisotropic dewetting behavior on a rice leaf, and striking superhydrophobic force provided by a water strider's leg, are all related to the unique micro- and nanostructures on the surfaces. It gives us much inspiration to realize special wettability on functional surfaces through the cooperation between the chemical composition and the surface micro- and nanostructures, which may bring great advantages in a wide variety of applications in daily life, industry, and agriculture. This Account reviews recent progress in these aspects.

Animals↗
PubMed2001

Wettability changes in trichloroethylene-contaminated sandstone.

It is usually assumed that chlorinated solvent nonaqueous-phase liquids (NAPLs) are nonwetting with respect to water-saturated porous media. The focus of this work was to examine whether this supposition is appropriate for used trichloroethylene (TCE) samples. In this work, the term "used" indicates that the sample has been employed industrially and therefore contains solutes and breakdown products related to its previous use. The data obtained in this study indicate that exposure of initially water wet quartz slides to industrially used solvents can cause a contact angle change, measured through the aqueous phase, of 100 degrees with a maximum stable contact angle of 170 degrees (indicative of strong NAPL wetting characteristics) being recorded. The work on quartz slides was complemented by the use of sandstone cores. Wettability was measured using the Amott test. Used TCE again proved able to alter the wetting properties of sandstone to neutral wetting. The complexity of the industrially used samples precluded any realistic attempt to examine the agents causing these wetting changes. The data captured in these experiments were compared with laboratory grade TCE, and some attempts were made to synthesize known mixtures in order to replicate wetting changes. These experiments resulted in contact angle changes but did not alter the overall wettability of the quartz slides or sandstone cores. Finally the work reported here also demonstrates that increasing the duration of exposure to solvent has an important impact upon measured contact angle.

Industry↗
PubMed2005

Face-integrated Fukui function: understanding wettability anisotropy of molecular crystals from density functional theory.

Wettability is one of the anisotropic surface properties of molecular crystals that exhibit the structural variance of chemical moieties on various growth faces. The divergence in liquid-solid interactions at different faces is thought to be related to the inherent responding capacity or sensitivity of a solid surface to the perturbation in electronic structures and atomic positions as a result of the contact by a liquid. Since the Fukui function, according to density functional theory (DFT), is a local function for describing such sensitivity to the structural perturbation and is directly related to local softness, it has been proposed and tested to use an integrated Fukui function over a crystallographic plane for describing the anisotropy of solid-liquid interactions. It is found that the contact angle of a polar solvent, such as water, on a crystal surface shows an intimate connection to the integrated Fukui functions of the surface, illustrating an extension of Pearson's HSAB (hard and soft acids and bases) to crystal systems. The concept of face-integrated Fukui function and the approach to apply the HSAB with the DFT-based concepts may provide a powerful means for describing anisotropic properties, including wettability of organic crystals.

Anisotropy↗