Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Maxilla”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Osteonecrosis of the mandible or maxilla associated with the use of new generation bisphosphonates.

OBJECTIVE: The use of bisphosphonates is well established for the treatment of patients with metastatic bone disease, osteoporosis, and Paget's disease. Osteonecrosis of the mandible or maxilla associated with the use of bisphosphonates is a newly described entity never before discussed in the otolaryngology literature. In this paper, we review a series of patients diagnosed with osteonecrosis, all treated with new generation bisphosphonates. Our objective is to inform and educate others, particularly otolaryngologists/head and neck surgeons, about this drug induced entity, a condition that should be recognized early to avoid potential devastating consequences. STUDY DESIGN: Retrospective chart review of a series of patients from a tertiary referral center. METHODS: Pathology reports of specimens submitted from either the mandible or maxilla were reviewed from the previous 12 months. Any patient diagnosed with osteonecrosis without evidence of metastatic disease at that site was included; those with a previous history of radiation therapy were excluded. Each patient's medical history and profile were reviewed. RESULTS: Twenty-three patients were identified with osteonecrosis of the mandible or maxilla. All of these were associated with the use of new generation bisphosphonates: zolendronate (Zometa, Novartis), pamidronate (Aredia, Novartis), and alendronate (Fosamax, Merck). Eighteen patients with known bone metastases had been treated with the intravenous form, whereas five patients with either osteoporosis or Paget's disease were using oral therapy. Patients typically presented with a nonhealing lesion, often times the result of previous dental intervention. Although the majority of these patients were treated with conservative surgical debridement, we present a case requiring a near total maxillectomy. CONCLUSIONS: Drug induced osteonecrosis of the mandible or maxilla has been recently recognized as a sequelae of treatment with the new generation of bisphosphonates. Most patients can be treated with conservative surgical debridement and cessation of bisphosphonate therapy, whereas a few may require radical surgical intervention. Other recommendations include regimented prophylactic care with an assessment of dental status before the administration of bisphosphonates, avoidance of dental procedures, and close monitoring of oral hygiene.

Biopsy, Needle↗

Le Fort I osteotomy with interpositional bone grafts and delayed oral implants for the rehabilitation of extremely atrophied maxillae: a 1-9-year clinical follow-up study on humans.

AIM: The purpose of this clinical follow-up study was to report the clinical outcome of osseointegrated implants placed in extremely atrophied edentulous maxillae after Le Fort I osteotomy and interpositional autogenous iliac bone grafts. PATIENTS AND METHODS: In a 10-year period (1995-2004), 39 patients, 18 males and 21 females, aged from 32 to 76 years, presenting with severely atrophied edentulous maxillae were treated with Le Fort I osteotomy and interpositional iliac bone grafts. Four to 8 months after the reconstructive procedure, 281 osseointegrated implants were placed in the reconstructed maxillae. Four to 8 months afterwards, abutments were connected and the prosthetic rehabilitation started. The mean follow-up period of implants after the start of prosthetic loading was 45.9 months (range: 12-108 months). RESULTS: The reconstructive procedure was successful in 38 of 39 patients. In one patient, partial loss of the inlay graft occurred before implant placement. Six patients (42 implants) dropped out of the study. Fifteen implants were removed during the follow-up period, due to loss of integration. Thirty-two implants, although integrated, presented with peri-implant bone-level changes higher than those proposed for successful implants. Cumulative survival and success rates of implants were 94.5% and 82.9%, respectively. CONCLUSION: Results from this study showed that Le Fort I osteotomy with interpositional bone grafts followed by delayed implant placement is an acceptable means to rehabilitate edentulous patients affected by extremely atrophied edentulous maxillae. Survival rates of implants are consistent with those related to implants placed in native, non-reconstructed bone. Conversely, the success rate of implants resulted to be lower as compared with those obtained for implants placed in native bone.

Adult↗

Simplified treatment of the atrophic posterior maxilla via immediate/early function and tilted implants: A prospective 1-year clinical study.

BACKGROUND: Posterior maxillae are often difficult to treat owing to the sinus antrum. Placing implants in remaining bone regions in the atrophic maxilla, without performing sinus grafting, is a challenge. Immediate function adds to this challenge. PURPOSE: The purpose of this study was to suggest and evaluate a simplified treatment concept for the rehabilitation of the atrophic maxilla using tilted implants subjected to immediate/early function. MATERIALS AND METHODS: Eighteen patients were included in the study. Sixty implants were placed to support 19 fixed partial or full-arch prostheses. Immediate/early function was applied. The patients were followed for a minimum of 1 year after prosthesis connection. Stability measurements and radiographic evaluation of the change of the marginal bone level were performed. RESULTS: One axial and one tilted implant failed in one patient, giving a cumulative survival rate of 96.7%. No failure of provisional prostheses occurred. The mean marginal bone resorption recorded after 1 year was low (0.82 mm for axial implants and 0.34 mm for tilted implants). CONCLUSION: The results of the present study suggest that tilted implants placed in immediate function may be a viable treatment approach for the rehabilitation of the atrophied maxilla. Simplified treatment procedures, reduced surgical invasion, shorter treatment time, and reduced costs constitute some of the benefits for the patient and the clinician.

Aged↗

Direct implant loading in the edentulous maxilla using a bone density-adapted surgical protocol and primary implant stability criteria for inclusion.

BACKGROUND: Long healing periods and submerged implant placement are commonly used in the maxilla. This extends the time of oral handicap and makes the use of immediate loading protocols an attractive option. The current clinical literature on direct loading of dental implants in the maxilla is limited. PURPOSE: The purpose of this prospective clinical study was to evaluate the clinical outcome and stability of directly loaded Brånemark System or Replace Select Tapered implants (Nobel Biocare AB, Göteborg, Sweden) after using a modified surgical protocol and inclusion by primary implant stability. In addition, a reference group treated according to a two-stage protocol was used for comparison. MATERIALS AND METHODS: Twenty patients planned for prosthetic rehabilitation with implant-supported bridges in the edentulous maxilla participated in the study group. The final decision on immediate loading was made after implant placement using insertion torque and resonance frequency analysis (RFA) as acceptance criteria. All patients were included, and 123 oxidized implants (TiUnite, Nobel Biocare AB) were placed using a surgical protocol for enhanced primary stability. A screw-retained temporary bridge was delivered within 12 hours and a final bridge within 3 months of implant placement. The patients were monitored through clinical and radiographic follow-up examinations from implant placement to at least 12 months. Marginal bone level was measured at bridge delivery and after 12 months of loading. Additional RFA measurements were made after 6 months of loading. A reference group comprising 20 patients with 120 implants treated according to a two-stage protocol was used for comparison. RESULTS: One (0.8%) of the 123 implants in the study group failed, and no implant was lost in the reference group. The cumulative survival rates after 12 months of loading were thus 99.2% and 100% for immediate and delayed loading protocols, respectively. The marginal bone resorption was 0.78 (SD 0.9) in the study group and 0.91 (SD 1.04) in the reference group. RFA showed a mean value of 62.9 (SD 4.9) implant stability quotient (ISQ) at placement and 64.5 (SD 4.8) ISQ after 6 months for immediately loaded implants (not significant). The corresponding figures for the reference groups were 61.3 (SD 8.8) ISQ and 62.6 (SD 7.0) ISQ (not significant). There were no statistically significant differences between the groups at any time point. CONCLUSION: The use of six to seven implants for immediate loading of a fixed provisional bridge is a viable option for implant treatment of the edentulous maxilla, at least when good primary implant stability can be ensured.

Aged↗

Definitive CAD/CAM-guided prosthesis for immediate loading of bone-grafted maxilla: a case report.

BACKGROUND: The reconstruction of a functional occlusion in the presence of severe residual ridge resorption remains a significant challenge for maxillofacial surgeons and prosthodontists. Removable appliances are unsuccessful in severely resorbed cases and the advanced degree of bone loss precludes conventional implant-retained prostehesis. In recent years, bone graft reconstruction of the maxilla and the mandible has been advocated to reverse the debilitating effects of alveolar ridge resorption. PURPOSE: The surgical objective was the reconstruction of the osseous platform of the jaws, thereby allowing implant-retained definitive prosthetic rehabilitation utilizing the Teeth-in-an-Hour concept within 4 months. MATERIALS AND METHODS: A completely edentulous patient received bone grafts from the posterior iliac crest to augment both the maxillary and mandibular alveolar ridges. The manmandible was augmented using Marx's "soft issue matrix expansion procedure" and was restored in the conventional manor using an impression and a milled framework. The maxilla underwent "inlay/onlay" bone graft augmentation of the right and left maxilla at the same time as the mandiblular procedure. Implant placement was at 4 months post-bone graft reconstruction. Immediate loading of implants into a bone graft using Nobel Biocare's Teeth-in-an-Hour protocol prelaunch was implemented. This included CT-based implant planning, simultaneous CAD/CAM fabrication of a surgical guide, a CNC-milled framework, flapless surgical placement of the implants, and immediate placement of a pre-fabricated definitive prosthesis. This approach reduced the time necessary for an edentulous patient to transform from severely atrophic alveolar support to implant-retained maxillary and mandibular prosthetic restorations. Immediate loading with an implant retained definitive prosthesis using a bone graft-reconstructed osseous platform was also performed. CONCLUSION: The Teeth-in-an-Hour concept was utilized to restore bone grafted augmentation of the maxilla with immediate loading of a definitive prosthesis within 4 months. The remarkable accuracy of the software, minimally invasive and short surgery and treatment time, uneventful quick recovery with minimal discomfort is a benefit not only to the patient, also to the treating team.

Aged↗

The influence of mandibular dentition on implant failures in bone-grafted edentulous maxillae.

PURPOSE: To evaluate the influence of mandibular dentition on the performance of maxillary implants prior to definitive prosthesis attachment in maxillae that have been reconstructed with autogenous bone grafts. MATERIALS AND METHODS: A retrospective review of 90 consecutive patients, 31 men and 59 women, with a mean age of 57.4 years, was conducted. All patients underwent treatment planning to receive endosseous implants in the edentulous maxilla in conjunction with autogenous bone grafting. During the time from implant and/or bone graft placement until placement of the definitive restorations in the maxillae, the mandibular dentitions were recorded and categorized into 6 groups based upon the presence and distribution of teeth. RESULTS: Of 643 implants placed, 118 (18.4%) were lost between implant placement and definitive prosthesis placement. The type of mandibular dentition was significantly associated with implant failure during this time interval (P < .001). In particular, the patients with implants opposing unilateral occlusal support showed the highest rate of implant failure (43.8%, or 28 of 64 implants). Implants that opposed a mandibular implant-supported fixed prosthesis demonstrated an implant failure rate of 14.3% (10 of 70), and in patients with a removable mandibular denture, the implant failure rate was 6.2% (4 of 65 implants failed). The overall mean patient follow-up was 64.2 months. At 60 months, the cumulative implant failure rate based on the Kaplan-Meier method was 20.2%. DISCUSSION: Unfavorable concentration of forces on the maxilla may contribute to increased risk of implant failure. CONCLUSION: Effort should be made to create a favorable occlusion in the mandible, with attention being paid to broad distribution of occlusal contacts.

Adult↗

[Five-year evaluation of implants in the resorbed maxilla].

The survival of implants placed in the resorbed maxillae was investigated. Both edentulous and partially edentulous patients were evaluated including those who underwent 'sinus lift' procedures. The group of patients with a sinus floor augmentation showed a five-year cumulative survival rate varying between 100% for fixed bridges on implants in the partially edentulous maxillae and 75.6% for implants under overdentures placed in severely resorbed edentulous maxillae. It is concluded that placement of implants in the augmented sinus-floor is justified, if the patient is well informed. The procedure can provide a good solution for the prosthetic problems of patients with a resorbed maxilla.

Alveolar Bone Loss↗

Dental implants and onlay bone grafts in the anterior maxilla: analysis of clinical outcome.

PURPOSE: Loss of alveolar bone in the anterior maxilla may preclude implant placement or compromise positioning and thus diminish the final esthetic result of the restoration. Bone augmentation can overcome such difficulties but may affect osseointegration. The aim of this study was to report the outcome of buccal onlay bone grafting in the anterior maxilla in routine dental implant practice. MATERIALS AND METHODS: Seventeen consecutive patients (12 men and 5 women, mean age 31.4 years) received autogenous bone grafts from the mandibular symphysis to the anterior maxilla. A total of 35 Brånemark System MK II implants were placed in grafted bone. RESULTS: Fifteen patients had a mean period of graft consolidation of 19.7 weeks (range 13 to 32 weeks). Two patients had simultaneous graft and implant placement; 1 implant failed to Integrate in this group. This represents a survival rate of 97.1% of implants in functional loading after a mean follow-up period of 153.6 weeks from occlusal loading (range 74 to 283 weeks). DISCUSSION AND CONCLUSION: Mandibular block onlay grafts appear to be a predictable method for augmenting the width of the anterior maxilla prior to implant placement.

Adolescent↗

Influence of cleft palate on growth of the maxilla in mouse embryos.

Cortisone acetate (7.5 mg on day 12, or 4 X 2.5 mg on days 12-15) and single dose of 6-aminonicotinamide (0.5 mg on day 14) were administered to pregnant females of random bred strain H-Velaz mice. The width of the alveolar arch of the developing maxilla was measured in drawings of the roof of the mouth of 600 fixed embryos taken between days 16 and 19. The width of the maxilla of experimental embryos with a closed secondary palate was the same as in the control embryos throughout the observation period, whereas the maxilla of all embryos with cleft palates was wider than in the controls. Final expansion of the maxilla was the same in all experimental groups.

6-Aminonicotinamide↗

[Construction of three-dimensional finite element model of human edentulous maxilla and cranial skeleton].

OBJECTIVE: To develop an effective and feasible method to construct three-dimensional finite element model of the whole edentulous maxilla and cranial skeleton. METHODS: Based on three-dimensional computer aided design model which was constructed by multi-slices helical CT scanning data of a male's head in specialized software, three-dimensional finite element model of edentulous maxillary and cranial skeleton was established; the stresses distribution in maxilla was investigated under occlusal load with computer simulated a complete overdenture. RESULTS: The three-dimensional finite element model of edentulous maxilla and cranial skeleton had favorite similarity in geometry, the distributions of stresses in maxilla and the wall of maxillary sinus could be clearly observed. CONCLUSIONS: The study verifies that this three-dimensional finite element modeling method is feasible and effective.

Aged↗

Control of vertical position of the maxilla in orthognathic surgery: clinical application of the sandwich splint.

The Le Fort I osteotomy can be used to change the position of the maxilla in all three dimensions. A presurgically fabricated occlusal splint is used to reproduce the planned sagittal and transverse position of the maxilla. Various methods for determining the proper vertical position have been described. The major difficulty in vertical control when these techniques are used is the sagittal change of the lower reference point as the maxilla is advanced. The relative error in the vertical plane increases with larger sagittal movements. The sandwich splint technique, with two stable intraoral reference points, can be used to ensure proper vertical positioning of the maxilla. This method enables exact measurement of the vertical dimension during cast surgery and in the operating room. Vertical measurements are based on the relationship between the mandible and skull base. This distance remains constant during splint fabrication and when the splint is used at surgery. Postoperatively, the mandible can be rotated into the new centric occlusion.

Dental Occlusion, Centric↗

[Changes in the TMJ after moving of total maxilla upward and mandibular autorotation procedures].

Upward moving of total maxilla and mandibular autorotation procedures are new operations for correction of Long Face Syndrome and other maxillary deformities. What distance could maxilla be move upward and it's effect on TMJ had rarely been reported. This paper reports our study results using cephalometric analysis, measurement of TMJ position in preoperatively and postoperatively and clinical evaluation of TMJ. 1. The moving of maxilla upward should not go beyond the limit of 5 mm. If moving maxilla upward is more than 5 mm, the mandibular autorotation procedure should be avoided. 2. In this limit of 5 mm TMJ could adapt new position and doesn't produce pathological changes.

Dental Occlusion↗

Prenatal skeletal maturation of the human maxilla.

Previous investigations on the prenatal development of the human maxilla have focused mainly on the elevation and fusion of the soft tissue palatal shelves. The bony development has received only sporadic attention. The aim of the present investigation was to analyze and set up bony developmental stages in the human maxilla, as knowledge of normal skeletal developmental course, which has never been elucidated, is the prerequisite to understanding the abnormal course of development. The present study was based on a radiographic and histochemical investigation of maxillae from 104 human embryos and fetuses from the first half of the prenatal period. A marked regularity in the maxillary ossification pattern was observed, and consequently seven maturity stages, Max I-Max VII, were described. The material was divided according to these stages and related to general fetal size (crown-rump length) and to general fetal maturation (composite number of ossified bones in hand and foot). The material available did not justify a description of skeletal development of the maxilla as a function of CRL or CNO.

Humans↗

[Maxilla in harmonious face. A cephalometric study in adult Greeks].

The purposes of the above research work were to describe a) the normal size of the maxilla and b) the normal sagittal and vertical position of the upper jaw and to define a) the relationship between the sagittal and vertical maxillary position and b) the way in which the variables concerning the size and position of the maxilla correlate in the harmonious faces with normal occlusions. The material of this study consisted of 276 lateral cephalographs of an equal number of adult Greeks (147 males and 129 females) with normal Angle/Class I occlusion and harmonious face. Five variables were measured (one linear, ANS - PNS and four angular, S-N-ANS, S-N-A, N-S-ANS and N-S-A). Maximum, minimum and mean values as well as standard deviations of each of the above variables were calculated. The range of each variable was divided into three groups (15% low, 70% medium and 15% high values). The qualitative relationship was then studied between the following couples of variables: S-N-ANS and N-S-ANS, S-N-A and N-S-A, S-N-ANS and ANS-PNS, S-N-A and ANS-PNS and lastly S-N-A and S-N-ANS. Factorial analysis of correspondences were finally carried out (Benzécri 1973, 1980) which made possible the identification of the way in which the selected variables were correlated. The main results researched were: 1) The maxilla in males is bigger in size. 2) There was not any difference of the sagittal and vertical maxillary position referring o the anterior cranial base between the sexes. 3) The sagittal position of anterior nasal spine is analogous to A point position. 4) Three different types of the maxilla were found within the normal range based on the selected variables. a) Type A2 was characterised by the medium values of the variables. b) Type A1 was characterised by small upper facial height and high values of forward position of points A and ANS. c) Type A3 was exactly the opposite of the A1 characterised by big upper facial height and low values of forward position of the ANS and A points.

Adult↗

The body and processes of the fetal maxilla.

Development of the maxilla has been studied based on 50 fetal maxillae. The morphological findings are supplemented with data of measurements where necessary. The frontal surface of the maxilla was examined, and its measurements were compared to those of the surrounding structures in fetal life and in adults. A detailed analysis deals with the alveolar process, its walls (laminae), the topography and measurements of the maxilla and the zygomatic bone, the relationship between the frontal process and the nasal bone as well as the frontal bone, with special regard to postnatal changes in these relations, followed by the morphology of the palatine process and the canine fossa. Some of the morphological findings are explained by ontogenetic and phylogenetic factors.

Female↗

Dynamic response of the adult monkey maxilla to occlusal forces.

We investigated the magnitude of various maxillary occlusal forces and the direction in which such forces were propagated. Adult monkeys were anesthetized and forced to occlude on sticks of 3, 5 and 7 mm thickness at the canines, second premolars and second molars. Electrical stimulation was applied to the masseter and temporalis muscles, and measurements of magnitude, direction and character of principal strains were recorded. Readings for the surface of the maxilla indicated that bone sutures and adjacent cavities are intimately and functionally related to the buffering of these occlusal forces. The maxilla deformed as the premaxilla was pushed out in the region of the premaxillomaxillary suture. The nasal bone was stretched anteroposteriority in the region of the nasomaxillary suture as the space that arose due to contraction of the masseter muscle was filled in the region of the zygomaticomaxillary suture. In addition, when occlusal forces were imparted on the maxilla, the surfaces of this bone bulged out due to the effect on adjacent bone cavities. Results demonstrated that the maxilla dispersed occlusal force well by these mechanisms. Accordingly, there were very few regions in this bone where stresses concentrated.

Animals↗

Onlay bone grafting to the anterior maxilla: preparation for placement of implants.

Placement of implants in the dental alveolus of the maxilla is limited by bone width and the height of bone between the alveolar crest, the maxillary sinus, and the floor of the nose. In the anterior maxilla, the thin cortices can be split and grafted, or an onlay graft can be positioned on the labial/buccal cortex. This paper and presentation discuss the onlay bone graft to the anterior maxilla. This surgical procedure enables implant placement in previously deficient bone within the maxilla.

Alveolar Bone Loss↗

Techniques for achieving three-dimensional positioning of the maxilla applied in conjunction with the Göttingen concept.

Three-dimensional repositioning of the maxilla is possible after Le Fort I osteotomy. However, the preoperatively planned and desired position of the maxillary dental arch often cannot be sufficiently achieved during actual surgery, and deviations in the sagittal and vertical dimensions are common. To reduce these errors, the model-repositioning instrument was developed for model surgery in conjunction with the Göttingen concept for orthodontic-surgical treatment with condylar position control. This instrument allows a controlled three-dimensional positioning of jaw segments with three reference points directly on the teeth. The three-dimensional double-splint method combined with a surgical facebow was developed for a controlled three-dimensional positioning of the maxilla during surgery. This instrument and method were applied during treatment of 20 adult patients, and the position of the maxilla before and after surgery was analyzed. It was found that the planned position of the maxillary dental arch could be transferred from model surgery to actual surgery with an accuracy of +/- 1 mm sagittally and vertically. Thus, the application of the Göttingen concept for three-dimensional positioning of the maxilla results in an improvement of accuracy compared with other methods. Furthermore, use of these procedures is easier and less time-consuming during model and actual surgery than are other procedures.

Adult↗